129,247 used machines on RESALE, but how to find them? Machine Search
1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...
Starting Air Valve Wärtsila Sulzer From old stock Unused!
Starting Air Valve Air Starter for Wärtsila Sulzer RTA 48T-B Several available
Offer a starter with the part. 229312 for sale.
Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...
Key data: 4 KW, 230 V
Inverter generator set 4 kW - NEW with electric start and wheelset - Power: 3.2 / 3.5 kW - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 0.98 liters / hour (50%) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 45 kg - Socket: 230V 16A - USB port / socket - 12V socket for charging the battery - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems. In addition, the consumption of an inverter generator is up to 30% lower than that of a normal generator set, as the speed automatically adapts to the power consumption. - - - - - Shipping: - Germany-wi ...
Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg
1.Powder curing furnace 2,000 x 1,900 x 2,000mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fans and heat-resistant bea ...
1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...
Electrode diameter 0.5 to 3mm Travels 300x400x350mm CE certification proves the best possible safety Complete series in above-ground construction Electrodes Ø 0.5-3mm Travel X-axis 300mm Travel Y-axis 400mm Travel Z-axis 350mm Travel W-axis 300mm Speed C-axis 30-60mm/min Rapid traverse Z-axis 120mm/min Aspect ratio 300:1 Table dimensions 320x440mm max. working current 30A
Our pallet wrapper "Starter" is a semi-automatic stretch wrapper, perfect if you no longer want to wrap your pallets by hand or are looking for an inexpensive backup device. Our Vogel Starter is possibly the cheapest pallet wrapper from European production, and without compromising on quality. In contrast to our other pallet wrappers, the number of options here is very limited, because here we wanted a pallet wrapper that could be produced as cheaply as possible through the greatest possible standardization and covered many applications. With the 3 programs, you can set how fast the foil carriage and turntable run and whether you want a "cross winding" or or "just wrap up". Head windings and foot windings can also be saved for each program. You can easily control the brake tension using the mechanical foil brake. The programs can be protected by a password, so that the user ...
Meva Startec 122m2 including accessories. The package consists of different element sizes. The Meva Startec is compatible with the Meva Alustar and the new generation Startec. The formwork panels are all in good condition, the frame is in need of repair for some elements. Price € 40,00 per m2
An edge banding machine is being sold. Machine works perfectly. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Banding thickness max 5 mm Plate thickness max 40 mm Thickness of roll material max 3 mm Workpiece length min 180 mm Workpiece width min. 60 mm Feed max. 8 m/min Glue system granules glue basin bottom Cross-cut saw unit 2 motors Weight approx. 660 kg The machine must be picked up with a tail lift or drop-down trailer, as there is only one pallet truck. Price is 5000 net plus VAT All information without guarantee Article location Nuremberg
roll diameter: 400 mm throat: 900 mm workpiece height: 400 mm table-size: 700 x 660 mm saw band length: 4630 mm turning speeds: 45 - 500 m/min : mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Dimensions (LxWxH): 1,95 x 0,9 x 2,25 0 Band saw with - Ideal welding machine - Belt grinder - Table tiltable -15° to +45° - Pneumatic height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.
panel thickness: min 10mm, max 50 mm max panel dimensions X : 3000 mm / Y : 900 mm min panel dimensions X : 300 mm / Y : 90 mm Feed speed : 20 m/min Drilling motor 2,2 kW speed : 4,460 r/min vertical drilling spindles 8 6 horizontal drilling spindles, 2 x 2 in X direction, 1 x 2 in Y direction grooving saw in X direction, diameter 125 mm
Frequency converter soft start 8.3 kVA SEW Movitrac Used frequency inverters, approximately 3 years in operation, increasing the engine power, currently no longer in use. Unit tested and fully functional. Technical data: f input = 50-60 Hz f output = 0-400 Hz power 8, 3kVA in = UE = 380-500V 12A UA UE = No guarantee you can return but within according to the FU 10 business days and we will refund the purchase price. Information at 0170-2204056 or fa.raupp@t-online
Cylinder head E-start RECON Part number: 0400 1652 Complete Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us.
RECON Part number: 0400 5839 E-start Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 0405 2476 / 0400 6154 Complete with air start valve Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 0215 4064 / 0400 5112 / 0400 3113 Air start ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Starter Bosch -Voltage: 24 V -Type plate: 113445 24V E5200 -Tooth: 12 -Price: per piece -Number: 2 pieces -Dimensions: 440/220/H155 mm -Weight: 28 kg/piece
Starter Bosch -Bosch type: 0 001 368 616 -Voltage: 24 V -Teeth: 9 -Dimensions: 370/125/H170 mm -Weight: 16 kg
Starter Delko-Remy -Voltage: 12 V -Type: 1108 2 7A 14 -from forklift: Still EFG 1.0/5002 -Teeth: 10 -Dimensions: 305/180/120 mm -Weight: 11.5 kg
Various air-, oil- and fuel-filters, starter engines and alternators to be sold as package after inspection and price negotiations. Please arrange appointment with Mr Kottowski
The starting relief and safety valves are available in various sizes.
Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg
Inrush current limiter, soft starter, soft starter, starting current limiter -Manufacturer: Alfred Imhof, soft starter size D08 -Technical data: see photo identification plate -Number: 2x soft starters available -Price per piece -Dimension: 95/65/H110 mm -Weight: 1.5 kg
Bosch starter motor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 -Solenoid coil: Type 0331402502 -Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg
Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg
Brand new Original Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch
Remanufactured Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch
Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg
starter -Manufacturer: Bosch starter motor type 0 986 011 140 -Voltage: 12 V -Teeth: 9 -Solenoid coil: Type 0331402503 -Dimensions: 290/190/H115 mm -Weight: 11 kg
RECON Bosch Starter for MWM TCD 2016 V12 Part number: 0117 8721 Bosch number: 0 001 417-058 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
TO WHOW IT MAY CONCERN ; WE VE NEW UNUSED INGERSOLL RAND 150T AT OUR STOCK . READY TO SHIPMENT MODEL : 150T MPF88R54-020 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Starter for lawn mower Husqvarner 850 new, from stock, starter Cub Cadet John Deere for New Holland Sabo Toro Briggs & Stratton, plus packaging and shipping
Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg
maximum number of results exceeded
please refine your search
200 € 
