st used for sale

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

Ersatzwelle(Paddel), (drive shaft) for the STT 5000 + STT 2000. Mint condition, never used.

approx. 3000 m2 steel construction stage 2-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

Gas generator generator generator used AC Generator Manufacturer Newage Engineers LTD Type Stamford HC434F Power 375 kVA / 1500 rpm 220/380 V Gas engine Manufacturer MWM Deutz Type TBG 234 V12 Built in 1988 Power 300 kW / 1500 rpm with heat exchanger BLOKLAND NON FERRO BV Type 275-2000 Area 20 m2 Dimensions total approx. 4100x1250x2400 mm + control cabinet approx. 1500 x 700 x 2100 mm

The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.

Dear customers, currently we offer a polystyrene press incl. shredder for sale. It is a new machine that has 0 operating hours! Here are a few more technical details: Material to be processed: EPS moulded parts and chips Maximum material density that can be processed: 18 kg/m³ Loading opening: 700 x 360 mm Filling height 1,402 mm Achievable compaction: up to 250 Kg/m³ System throughput: up to 15 kg/h Block dimensions: 130 x 130 mm Power supply: 3x400 VAC+N+PE 50 Hz Connected load: 1.5 KW, 400V 50Hz incl. automatic press pressure regulation with pellet holder Finish: RAL 7035 (light grey) combined with RAL 2011 (deep orange) Incl. water dosing system for direct screw cooling up to 10 litres/h with water shut-off valve. Price plus VAT, which will be shown separately on the invoice. Transport possible worldwide for an extra charge! If you have any questions, please d ...

2 units, 1 pack-Delivery.

STANDARD-EQUIPPED

screw size: 133 mm injection shot weight in Polysterol: 5940 g/PS closing pressure: 8000 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll Forming Line 9-Stand Stud & Track

Pressing area: 3000 mm x 1800 mm; Number of manual hydraulic cylinders vertical: 3; Number of manual hydraulic cylinders horizontal: 2; Pressing pressure: 1500 kg; Machine length: 4000 mm; Machine width: 750 mm; Machine height: 2250 mm; Chassis on wheels, two of which steered Manual hydraulic cylinders height adjustable Vertical sliding posts

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

Stat: T52/4-KB52.2 F52.3T T52 3T/4 - KB-F

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

- Self-supporting, firmly welded, torsion-resistant saw frame with hardened guides - TRK2 Automatically evasive aluminium slatted frame with plastic pads - 17-fold roller support with 3 brake pedals - 5.15 m long, split center support - Stable, durable saw bar construction - Powerful, powerful engine - Supersilent system to dampen engine noise - Electromagnetic motor brake - Cutting area 5300 x 2240 x 80 mm Incl. small parts support made of wood over the entire length of the machine and set for free-standing assembly

Complete bottling line for 6 liters PET bottles 3.000 bph Composed by: 1. PET blowing machine manufacturer STM (Poland) type Blue line 3 Manufacturing year: 2015 Capacity: 3.000 BPH with 3 cavities mould for 6 litres with water chiller and full HP compressor unit. 2. Air conveyor system exit PET blower conveying the PET bottles to the filling tribloc 3. Rinsing filling capping Tribloc STM ARROW PET 16/16/6 NC/BIG for filling still mineral water in 5 liters PET bottles manufacturing year 2015. 4. Labelling machine UNO ADE adhesive labels on reels manufacturing year 2016 5. Automatic handle setting machine Ersey Makina manufacturing year 2015 6. Full bottles conveying system 7. Automatic Palletizer Ersey Makina manufacturing year 2015 8. Automatic stretch wrapper Ersey Makina manufacturing year 2015 Exceptional opportunity. Line available immediately.

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

Plate cutter, composite stone cutter, stone pincers, plaster stone pincers -for effortlessly cutting slabs and composite stones to length through the translation of the eccentric lever -great stability with low weight -exact guidance of the cutting knife -pendulum suspended upper knife for cutting materials that have a conical cross-section (curbs) -Max. for 6 cam stones -Own weight: 10 kg

Size: 360x650 mm Foldings: diptych, triptych, quadruptych, cross folding.

Manufacturer: Heidelberg Stahlfolder Model: 23124F Stahl TFU 142/442 Condition: ready for operation (used) Machine was in working condition and after that was reassambled and moved to storage. We can put together everything in place. Type of input current: three-phase Working width: 1,420 mm Stack height: 1,650 mm

Steinert Electric Magnet Strap Brand: Steinert Dim. conveyor belt: A.A.= 2400 mm Belt width : 1200 mm Propulsion: 3 kW slip-on gearbox Dim. Block : 1400 x 1150 x 630mm Power requirement: 6.5 kW Rectifier included. (new)

This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.

Striebig Standard III 6220A Disconnecting Machine It is not clean, but it is in perfect condition because we have used it very little here. It has 6 m

Offer Forklift STILL EFG 1.5 o. R50 3 Wheeled forklift Trplex approx. 4 m lifting height with charger Picture 1-14 The forklift truck is being relocated from another location due to a business change and is now being sold at our customer's site. So far, it is ready for operation and working. The nameplate is not legible. Data partly taken from comparable types from our exploitation. The forklift is still in use intermittently. Manufacturer: Still Type: verm EFG 1.5 or R 50 1.5 Tricycle Forklift No. 50148424? Year of construction: unknown older Hours: 60848 Load capacity: 1500 kg UVV: no needs to be renewed Technical and visual condition: ready for use, severe signs of wear, UVV no needs to be replaced, see photos Length: approx. 1700 mm Width: approx. 1000 mm Height: approx. 1930 mm Tyres: good Mast Type: Triplex Lifting height: approx. 4000 mm Free stroke ...