sold used for sale

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

Ratio 5:1

ABC ENGINE 8MDKC / 883 KW / RUNNING TAKEN OUT

Soldi shrink wrapper, type: ET537, number: 3, 220 V, 14.4 A, plastic infeed belt, belt width: 220 mm, film width: 355 mm, clearance: 510 mm x 210 mm, seal length: 500 mm, total dimensions: 2400 mm x 1100 mm x 1700 mm.

Type WLG Made in Germany 1981 y.

Stringer, solar stringer, soldering machine for solar cells, A09-209-rus ATN, used Semi automated stringer Technical specifications: - Manual feed of the solar modules - 1 soldering station - Program assisted automatic soldering process - Adjustable soldering area - E Declaration of Conformity, Operating Instructions, Plans and Programs, - Compressed air connection 6 bar, power connection 16A, 400 / 230V, 6KW Very good condition: With the handstringer were max. 10,000 soldering operations carried out the max. Including the inlay work only about 50 operating hours. The stringer was overhauled and is in mint condition. It is a private sale of one of our customers.

- 1 blower built 1987: 800 mbar, 24.2 m3/min, 45 kW, 500 V; - 1 blower built 1993: 400 mbar, 24.2 m3/min, 45 kW, 500 V; - 1 blower built 2007: 700 mbar, 21.8 m3 rpm, 45 kW, 500 V

ERSA HOTFLOW - 7 Soldering furnace / tunnel dryer / belt dryer / continuous dryer Type: HOTFLOW – 7 Convection oven as soldering oven / tunnel dryer / belt dryer / continuous dryer for drying sheet materials on top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling bars at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Rated power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power: 67 KW Year of construction: 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm Exhaust pipes and additional fan can be supplied. Circuit diagrams are ...

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

Laser welding machine Automatic Letter Bender ALB SPEED MASTER 500W DUAL It is barely used, we have used it 4 times. We bought it for a project that ended up not working out. 500W Year 2020

Welding fume extraction, soldering extraction, laboratory extraction High vacuum Torch extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D series. No. 2902619 Year of construction 2004 Unit air volume flow max. 250 m3/h Minimum air volume flow rate min. 100 m3/h Separation efficiency 99.97 % Welding fume class W3 Motor power approx. 0.75 kW Mains connection 230 volts, 50 Hz - Suction power infinitely adjustable - 2 pieces Suction connections 45 mm - mechanical air filter (used) - mobile underframe with 4 fixed castors, platform roller Space requirement L x W x H 700 x 500 x 600 mm Weight suction 35 kg Weight platform roller 7 kg good condition; used

Universal soldering and welding torch ROTHENBERGER Allgas 2000 with oxygen and propane gas cylinder mobile Dimensions: 440 x 440 x850 mm

Multipurpose propane solderer BAT PROPY 1 without connection hose and pressure reducer in metal case New ! Dimensions: 250 x 220 x 75 mm

Soldering button, 12 pieces PENDAR 10x SI 1103 5322 A1 276 14279 2x SF 1103 5322 A1 276 14278 5x button button 5322 A1 414 14065 New Dimensions ( packaging ): 240 x 130 x 65 mm

Multipurpose propane solderer BAT PROPY 2 with connection hose and pressure reducer in metal case New ! Dimensions: 250 x 220 x 75 mm,

electric soldering iron, soldering device, hammer soldering iron BÖHME LEIPZIG Type B 2030 Power: 0.7 kW ( 700 watts ) Connection voltage: 220 V AC approx. 1.4 m connection cable soldering tip: 40 mm, chisel-shaped New ! Dimensions ( without cable ): 350 x 215 x 65 mm,

electric soldering iron, soldering device, for soldering machines ERSA Type 601 Power: 0.08 kW ( 80 watts ) Connection voltage: 24 V DC temperature: max. 350 °C approx. 0.35 m Connection cable Soldering tip: 52 mm ( 30 / 10 / 12 mm ), cone-shaped used, tested ! dimensions ( without cable ): 195 x 100 x 55 mm,

With accessories

Connected load: 41kW, an inspection is possible.

Power: 11kW, mit Zubehör, without solder tin und computer, the camera of the machine is defective.

Connected load: 18kW, was overhauled in 2017, an inspection is possible.

Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible.

Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, solder volume: 120kg, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, filled with lead-free solder, with documentation, on-site inspection is possible.

Max. solder width: 340mm, connected load: 8000W, an inspection is possible.

Connected load: 43,000W, including exhaust air box for the fluxing area, tubular fan shaft, 80 soldering frames, various mounting materials, 3 fluxer nozzles, 5 fluxer filters and documentation, an unused PCS-96 control unit is also available, on-site inspection is possible.

Max. PCB dimensions: 410x410mm, max. PCB weight: 5kg, connected load: 1.5-6.4kW, software: Windows 98, with documentation, the machine should be overhauled, there are various defects.

Soldering station, soldering iron, chip soldering system, workshop soldering iron, hammer soldering iron -Power: 220 V 300 watts -Weight: 1 kg

Soldering station, soldering iron, chip solder, soldering system -Temperature adjustable: 100-375 ° -Dimensions: 200/105 / H90 mm -Weight: 2.7 kg

Description: Composed of: Welding port station PHILIPS SBC 345  ,without welding rod. Material preheating station  ,GOOT POT 21C. Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 5 kg

Description: Consisting of various burner inserts and soldering attachment With operating instructions In a case Approx. Onsite Dimension. (l x w x h): 430 x 230 x 100 mm, weight approx.: 8 kg

Description: With soldering pliers, earthing In wooden case Approx. Onsite Dimension. (l x w x h): 540 x 270 x 300 mm, weight approx.: 30 kg

max. soldering width/passage height/board length: 340mm/100mm/500mm. max. wave height: 7mm, solder volume SnPb/SnAgCu: approx. 185kg/150kg, heating time from 20°C to 250°C: approx. 90 min. Preheating zones: 1, preheating power: 3kW, max. preheating temperature: 420°C. Soldering frame transport width: 417mm, transport angle manually adjustable: 6-8°, transport speed min.-max.: 0.3-2.0 m/min. Including 2 soldering frames: Profile: 18mm, lug L: 381mm. On-site inspection is possible.

Stainless steel centrifugal pump Alfa Laval, type SOLTDC 2/140 SSS, 4,0 kW, used, price ex works

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 220 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Offer: Sgns railway wagons for sale. These are sold from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: Price € on request piece plus VAT If you would like more information, please contact us. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for used material. Warr ...

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

-only control (Similar to Fig.) This control only as spare parts carrier is sold due to age. Axles: 6 Control: S4 Type: IRB1400 M94A Load: 5 kg range: 1440 mm Accessories: manual control unit, set of cables Condition: Used, good condition. This control only as spare parts carrier is sold due to age.

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...

Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Krebser Kehrli urological xray system UX 96 L with the following device components: generator Stadler SE 3000 tube Comet DI 86 HS-33/100-150 0.6/1.3 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient  ...

Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...