slotting machine used for sale

Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg

Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece

Code: 0010 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Planing machine horizontal slotting machine used; STANKO; Type: 7 D 36; Clamping table size approx. 700 x 450 mm; 380 V; Total approx. 3100 x 1600 x 1800 mm;

Foellmer ZE 42 double corner round slotting machine; cleaned and tested; 2x knives approx. 40mm; Max. Pile height 100mm; Tool spacing approx. 56-420mm. Double corner rounding machine Foellmer ZE 42; cleaned and checked; two knife ~40mm; max.pile hight 100mm; distance between heads ~56-420mm.

Stroke: 0 mm Throat: 650 mm Table diameter: 220 mm Make Urpe M 200 G Type M 200 G Year 1988 slotting machine senkrecht stossmaschine schwenkba Stroke = 0 - 200 mm Table = 650 x 220 Head tilting = 0 - 30 Gr.  

Tool holder for slotting machine PAGUS chisel flap: 140 x 85 mm 2x T-slot: groove width: 16 / 30 mm, groove depth: 21 mm 100 mm height adjustable, +/- 15° swivelling Flange diameter: Ø 230 / 80 mm shaft diameter: Ø 18 mm Wavelength: 48 mm Groove width: 6 mm ring groove: Ø 190 / 150 mm, depth: 23 mm used, tested ! Dimensions: 300 x 270 x 520 mm

Tool holder for slotting machine PAGUS tool holder (rotatable): 50 x 20 mm chisel flap: 125 mm height adjustable, +/- 15° swivelling Flange diameter: Ø 147 / 95 mm guide bolt: Ø 30 / 50 mm, length: 30 / 27 mm used, tested ! Dimensions: 460 x 340 x 155 mm

Key data: 350 mm, 450 mm

Electromechanical vertical slotting machine with integrated rotary table and four CNC-controlled axes Largest ram - stroke range 350 mm 0 to 80 strokes per minute infinitely variable Maximum installation height 640 mm Shock head - swivel range +/- 20° Rotary table diameter 450 mm Table - travel - 340 x 340 mm Bore in the round dividing table Ø 130 mm Maximum workpiece weight 1,250 kg Drive power 8 kW Weight approx. 2,600 kg

Urpe M200 vertical slotting machine. Travel: 0-200mm. Table size: 650x220mm. Strokes per minute: 40-55-75. With chuck.

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

Curve planer

HOV 25

Table diameter: 800 mm Y-way: 800 mm X-way: 800 mm Extension: 700 mm Stroke length: 40 - 210 mm Stolin creation: 350 mm Lifting speed: 10 - 56 ppm. Swivel head: 10° left/right Installation height: 500 mm (from table) 3-jaw chuck diameter: 700 mm Engine power: 4.4 kW Country of origin: Germany Transport mass LxWxH: 2700 x 1700 x 2300 mm Machine Weight: 4500 kg

Planing comb to Maag gear planing machine

MAX DIAMETER 750,MAX MODULE 10

MAX DIAMETER 800.MAX MODUL 10 , MAX STROCE 200

Stroke: 0 mm Throat: 0 mm Table diameter: 0 mm MERK   Stanko TYPE    7A420 M YEAR   70 er Stanko 7A420M Steek bank

Gear slotting 5140, Russia production, with change gears

Coming for sale : Peacock P1200 S , 2002 Under power If interested please contact

2 STATIONS BRONSHING (RAEUMMASCHINE) Year of construction 2001 great condition

Inv. Num. : 6256 Type: ZSTWZ Producer: WMW Created: 1954 Parameters: Maximum gear diameter (outer teeth): 1000 mm Table diameter: 900 mm Machine dimensions: 3000x1200x2300 mm External. internal module M 1 - 8

Tos HOV 25 Ø 500 mm Strokelength: 250 mm Table dia: 500 mm Longitudinal travel table X-axes: 560 mm Crosstravel table Y-axes: 450 mm Length : 2270 mm Depth : 1425 mm Weight: 2850 kg

MAX DIAMETER 250 SINUMERIC 810 C YEAR 1996

MAX DIAMETER 550 MAX MODULE 6

MAX DIAM 550 MAX MODULE 6

MAX DIAMETER 500 MAX STROCE 120 MAX MODUL 5

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

MAX DIAM 500, MAX MODUL 8 , PLC , DRO

max. ram stroke: . mm throat: . mm table diameter: . mm serial number: 556 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. wheel diameter 420 mm gear width 120 mm Max. module 8 Min. module 0,5 control BWO CNC yes. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5.3 x 3.9 x 3.4 m

MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D

- Planer length: 375 mm - Planing width: 500 mm - Lifting speed: 19 - 190 mm/stroke - Distance between table + ram: 390 mm - Table size: 350 x 315 mm - Total power: 1.8 / 2.2 kW - Machine weight: 1100 kg - Space requirements (W x D x H): 1.25 x 1.5 x 1.5 m - Condition: good Details good condition, runs very quietly Accessories various cranks

- Planer length: 375 mm - Planing width: 500 mm - Lifting speed: 19 - 190 mm/stroke - Distance between table + ram: 390 mm - Table size: 350 x 315 mm - Total power: 1.8 / 2.2 kW - Machine weight: 1100 kg - Space requirements (W x D x H): 1.25 x 1.5 x 1.5 m - Condition: good

table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm

Gear shaper Lorenz SJV 00 with change gears and accesories.

max. ram stroke:220 mm total power requirement:1,5 kW weight of the machine ca.:880 kg dimensions of the machine ca.:1.500 x 1.000 x 2.200 mm slot-milling length:220 mm toolhead swivelling: +/- 10° ° Grad table::650 x 250 mm table adjustment: vertical:360 °mm table adjustment: quer/längs: 170/400 °mm strokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

max. ram stroke:220 mm total power requirement:1,5 kW weight of the machine ca.:880 kg dimensions of the machine ca.:1.500 x 1.000 x 2.200 mm slot-milling length:220 mm toolhead swivelling: +/- 10° ° Grad table::650 x 250 mm table adjustment: vertical:360 °mm table adjustment: quer/längs: 170/400 °mm strokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

capacity 5 kilos of popcorn per hour - professional machine - Teflon coating - heated and illuminated cooking chamber - stirring system and automatic thermostat