127,530 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg Year of construction: Approx. 1970 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 100 mm gear width: 26 mm max. module: 31 min. module: 0,1 Control: Siemens 840 D SL total power requirement: 45 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ ...
Inv. Num. : 8331 Type: SKR 1200-NC Producer: REFORM Created: 1995 Parameters: Control system: Siemens SINUMERIK Max. workpiece diameter: 1200 mm Maximum length of the workpiece: 1000 mm Max. workpiece weight: 300 kg Max. speed: 1000 1/min Length: 2500 mm Width: 1500 mm Height: 1800 mm Weight: 4000 kg
! Exhibition Machine Corresponds to the Panhans LLB116 with the following optional accessories: - Single-lever operation with fine locking - Dial gauge in the handwheel for height adjustment SPECIFICATIONS: - Max. drilling depth 145 mm - Max. elongated hole length 240 mm - Height adjustment 135 mm - Motor power 1.3/1.7 kW - Suction nozzle Ø 100 mm - Machine weight 200 kg
! Exhibition Machine Equipment/Technical Data Work table mm 800x400 Motor kW 1.5/1.9 kW Spindle speed rpm 1440 / 2880 Max. slotted hole height above the table mm 160 Max. longitudinal work run mm 345 Max. transverse work run mm 245 Spindle stroke mm 160 Clamping Ø of tool mm 0 - 20 Max. tool length mm 175 Span Center Piece 2 Rotating table ° +/- 45° Dimensions of the machine mm 1500x1100x950 Machine weight kg 345 Other features: - Mechanical dowel device, distance 16-22-25-32 - Mechanically numerical spindle height display - Suction nozzle
Inv. Num. : 8398 Type: OFA 71A Producer: TOS Generated: Parameters: Maximum module: 10 mm Maximum gear diameter: 710 mm Maximum table load: 1000 kg Number of teeth of bevel gear: 8-400 Machine height: 2400 mm Machine length: 3900 mm Machine width: 2600 mm Machine weight: 13500 kg Equipment: Set of interchangeable wheels Conveyor
max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: SF213, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Slot strainer, Filter: Ø 85 x L 250 mm, Motor: 0,55 kW - 415 Volt - 17 rpm., Connections: Ø 2, Other: Double scrape
Birth Smoking Machine Specifications: Table size600 x 320 mm Borehole depth205 mm Drill hole length250 mm Height adjustment165 mm Engine speed 2840 rpm Weight180 kg
max. wheel diameter: 500 mm gear width: 125 mm max. module: 8 ram stroke range: 135 mm max.helical angle: 41 ° table diameter: 500 mm no. of teeth: 12 - 300 total power requirement: 7,5 kW weight of the machine ca.: 6 t 2021 completely overhauled and equipped with controls and new motors. suitable for internal & external gear shaping with: - Control unit - chip conveyor - coolant - change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 780 mm gear width: 130 mm max. module: 8 / 10 table diameter: 510 mm table bore diameter: 160 mm number of strokes (double strokes): 30 - 1500 DH/min Control: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mm table-size: 500 mm total power requirement: 36 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,9 x 3,65 x 3,8 m The machine is suitable for: - Internal and external gear teeth in small quantities - Internal gear teeth in blind holes (non-through holes) - External gear teeth without run-out, as hobbing would not be possible Examples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs... - Siemens Sinumerik 3 CNC control - Chip conveyor Machine was only used sporadically The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping plate with T-slots made of cast steel-grey cast ironBase plate of radial drilling machineAssembly table, assembly station, base plate for column-slewing craneLength 1850 mmWidth 915 mmPlate thickness 230 mmTable surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm- Milled top side parallel to the underside = clamping surface- Milled underside also the bars lie flat and support- Ideal as a base plateDead weight 1140 kggood condition; used
Clamping table with T-slotsClamping plate, clamping block, groove tableClamping cube for radial drilling machineClamping surface top: L x W = 1200 x 800 mmClamping surface side: L x H = 1200 x 200 mmOverall height: 400 mmD- Grooves: 20 mmD- Groove spacing: 200 / 60 mmOverall dimensions L x W x H: 1200 x 800 x 400 mmWeight: 680 kg; used
Key data: 630 mm, 8
A used gear pusher Lorenz S8/630 with interchangeable wheels.
Round clamping plate with T-slot straightening plate and clamping tableDiameter 1500 mmCentering hole in the middle 80 mmPlate thickness 54 mmWorking height 970 mm- 6 T-slots 18 mm- 3 threaded holes M20, bolt circle 1000 mm- Steel substructure without centric holeWeight 785 kggood condition; used
max. wheel diameter: 380 mm gear width: 200 mm max. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mm max. workpiece diameter: 400/ 600 (800) Außen innen beg max. gear width: 200 mm Center distance between gear head and table center: -50 / 450 mm Travel range of the lifting position: 250 mm Max. module for straight gearing: 6 mm Max. axial travel: 250 mm work table:: - table diameter: 400 mm table hole: 150 mm max. table speed: 30 1/m no. of T-slots: 6 St. Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kW Max. stroke rate: 600 DH/min Face milling head axis angle adjustment: +/- 0,5 ° spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mm Stro ...
gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.
Key data: 630 mm, 8
Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm
max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO 783 no. of strokes: 32 - 800 Hub/min stroke: 0-137 mm table diameter: 400 mm table bore diameter: 125 mm total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,5 m CNC control Heckler und Koch BWO 783 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
COLOGNE L2 YOC 1992 Rated current: 3.2 A (380V) 2 speeds (1,500 + 3,000 rpm) 2-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Drilling length: 200 mm Height adjustment by handwheel: 120 mm Altitude display via dial gauge in the handwheel Tischgr. 350 x 820 mm Keyless chuck 2 pneumatic workpiece clamps (safety clamping cylinders) Mitre stop (adjustable up to 60° on both sides) 90° plug-in stop Chassis Weight: 220 kg Manufacturer
max. wheel diameter: 1000 mm gear width: 180 mm max. module: 7 min. module: 0,5 min. ram stroke: 16 mm max. ram stroke: 180 mm table hole: 160 mm total power requirement: 4 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Aventics R480163950 CKP 25-300MM 8 Bar Cylinder Slotted Cylinder, CKP Series Item condition: New without orig. packaging, as pictured The goods come from a company liquidation and were temporarily stored in paternosters. Storage traces possible. R11C3 You can find more cylinders - new and used - in our shop! International shipping costs on request!
Dimensions (L/W/H): 720x900x1160 mm Weight: 120 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1160x750x1080 mm Weight: 260 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1200x1200 mm Weight: 700 kg Total power requirement: 1,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x740x1260 mm Weight: 240 kg Total power requirement: 2,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1480x1150x1250 mm Weight: 550 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...
For sale is a used keyway slotting machine of the brand RUWO HAHNDORF, type SEF 32, built in 1977. Technical data : Weight: approx. 103 kg Connection: 380 V, Power: 0.8 kW Stroke: 330 mm Dimensions: length approx. 1200 mm, width approx. 400 mm, height approx. 1200 mm Highlights: Solid machine from 1977 – robust industrial quality. Ideal for machining keyways – suitable for industrial production or special tools, for example. Condition & Notes: The machine is used and fully functional.
Dowel and slotted hole drilling machine GANNOMAT JUNIOR 320 LBM very good condition, as good as new, the machine comes from a very small carpenter's shop and was used there very little the machine is in its original condition, it has only been cleaned, the paint has not been touched up this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1993 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible t ...
max. wheel diameter: 1000 mm gear width: 200 mm max. module: 10 min. module: 0,5 max. dia. of teeth cutting: 1000 mm min. dia. of teeth cutting: 75 mm table diameter: 1000 mm boring diameter: 400 mm spindle stroke: 0 - 230 mm stroke position adjustment: 250 mm distance between table / ram: 480 / 730 mm dia. of shaper cutter: 8 Zoll taper: Morse 5 tool taper: 1 3/4 Zoll total power requirement: ca. 20 kW weight of the machine ca.: 11 t Standard version - Chip conveyor - Two additional tables with diameters of 850 mm and 1,500 mm - Several cutting tools - Set of interchangeable gears - Program for cutting in 1-2-3-4 passes/cycles - Program for spiral cutting - Several holders and clamps for workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Corner rounding machine Gämmerler 105 M; good condition; Knife 36mm; maximum insertion height 80 mm; larger table with the size 80x60cm; can also be used without the larger table; other knives are also available for an extra charge. Corner rounding machine Gämmerler 105 M; good condition; knife 36mm; max pile hight 80mm; bigger table with size 80x60cm; can also used without the bigger table; for option with other knifes.
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 2000 mm -Length: 4000 mm -Height: 255 mm -Plate thickness: 95 mm -Plate: with support ribs -Groove width: 42 mm -Groove spacing: 700 mm -Number: 2 clamping plates available -Price: per piece -Weight: 6600 kg/piece
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate 500 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 18 mm -Groove spacing: 280 mm -Dimensions: see drawing in the photos -Dimensions total: 500/500/H75 mm -Weight: 128 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H335 mm -Weight: 123 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H320 mm -Weight: 121 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H310 mm -Weight: 86 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 395 mm -Length: 512 mm -Groove width: 14 mm -Groove spacing: 64 mm -Dimensions total: 512/395/H65 mm -Weight: 71 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate height: 235 mm -Groove width: 22 mm -Groove spacing: 125 mm -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a Fluri milling machine type 14SE -Width: 720 mm -Length: 1200 mm -Height: 235 mm -Plate thickness: mm -Plate: Solid -Groove width: mm -Dimensions: 770/1200/H235 mm -Weight: 906 kg
maximum number of results exceeded
please refine your search
