slo used for sale

T-slot Table 3500 x 2450 x 610 mm Thickness: 610 mm Length: 3500 mm Large: 2450 mm With (1) -- Without (2) nuts: 7 t-slots

T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes

T-slot Table 3150 x 2000 x 400 mm Thickness: 400 mm Length: 3150 mm Large: 2000 mm With (1) -- Without (2) nuts: 8 t-slots

T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes

T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes

T-slot Table 4000 x 2500 x 300 mm Thickness: 300 mm Length: 4000 mm Large: 2500 mm Weight: 12 ton With (1) -- Without (2) nuts: 10 t-slots

Description: Axes movement:X,Y,Z (mm): 460x250x320- , Feeds: ,X/Y/Z (m/min): 15/15/15 Table size (mm): 700x250 Number of T-slots: 3x12x70 Table load capacity (kg): 50 Distance of main spindle front from table plane (mm): 60-380 Distance of column from table centre (mm): 150-400 Distance of main spindle centre from column (mm): ... Main spindle:- max. max. speed (FPP): 8000- , Main motor power continuous/max.: 2,2/3,1 kW Gear ratio/ drive: 1:1 / belt drive Tool magazine: Number of tool places: 10-type of tool , Magazine: umbrella Tooling: SK30 Installation:- enclosure size (mm): 1866x1500x2050 net weight (kg): 1250 electrical connection: 3x400VAC z-motion: 320 mm, x-motion: 460 mm, y-motion: 250 mm, control: NCT, table surface area l x w : 700x250 mm, taper: SK30, rapid motion: 15 m/min, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,0 ...

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

100 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 6,220,-- net from stock Offer consists of: 78 pcs stand or frame, 2.5 m, galvanized new 462 pcs. shelves, 150 kg load/compartment, galvanized used 26 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or ...

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

25 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 1,560,-- net from stock Offer consists of: 20 pcs stand or frame, 2.5 m, galvanized new 114 pcs. shelves, 150 kg load/compartment, galvanized used 7 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or o ...

---------------------

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price

Window slot machine REX with trimming saw and slot milling L x W x H: 200 x 150 x 160 cm Weight approx. 750 kg Built in 1976 The machine is in good condition, ready to use. This machine is available from October 2018. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

Curve planer

Cone slot milling machine Duko L x W x H: 1300 x 1000 x 1500 mm Weight approx. 800 kg Built in 1963 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Manual continuous scale Rhewa; good condition; cleaned and tested; Max. Load capacity 150kg, min.1kg; Division 50g; with forward roller conveyor 1.90m; Width 510mm. Flow scale Rhewa; good condition; cleaned and checked; max.weight 150kg, min1kg; division 50g; with infeed roll conveyor 1.90m; width 510mm.

Table diameter: 800 mm Y-way: 800 mm X-way: 800 mm Extension: 700 mm Stroke length: 40 - 210 mm Stolin creation: 350 mm Lifting speed: 10 - 56 ppm. Swivel head: 10° left/right Installation height: 500 mm (from table) 3-jaw chuck diameter: 700 mm Engine power: 4.4 kW Country of origin: Germany Transport mass LxWxH: 2700 x 1700 x 2300 mm Machine Weight: 4500 kg

Planing comb to Maag gear planing machine

T-slotted Floor Plates Number of T-slots: 5 T slot size: 28mm Total dimensions LxWxH: 3900x1600x400mm Weight: 4.300 kg

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

diameter range 6 mm shaft length under head 25 mm output pieces/min 100

see photos

Slot strainer,stainless steel,with motor scrape.

Slot strainer,stainless acid proof steel,Alfa Laval,type LKSF-CL-38

Wide slot nozzle, used, according to signage. 1420 mm width, adjustable lip. Adjustable top lip.7-15mm approx Removable Bottom Lip Vertical Choker bar 20mm infeed port. Decals. Used, purchased as seen, without warranty or other warranty. Delivery ex works CH, immediately upon arrival payment.

- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees

HOV 25

MAX DIAMETER 750,MAX MODULE 10

MAX DIAMETER 800.MAX MODUL 10 , MAX STROCE 200

Stroke: 0 mm Throat: 0 mm Table diameter: 0 mm MERK   Stanko TYPE    7A420 M YEAR   70 er Stanko 7A420M Steek bank

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm

Stroke: 0 mm Throat: 650 mm Table diameter: 220 mm Make Urpe M 200 G Type M 200 G Year 1988 slotting machine senkrecht stossmaschine schwenkba Stroke = 0 - 200 mm Table = 650 x 220 Head tilting = 0 - 30 Gr.  

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Single sided slot mortiser Pneumatic operation and clamping

Compressed air supply: 6bar, connected load: 1kW, weight: 120kg, the machine has defective pneumatics.

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Gear slotting 5140, Russia production, with change gears

Water slot machine make ROTOX make FWSused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Slotted tiller manufacturer ROTOX type FWS 386Fabr. -No: 386166, built in 1989for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight: 200 kgSpeed: 17200 rpmWith- Cooling lubricationused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Water slot cutter Fabr. ROTOX Type FWS 386Fabr. -No: 3866160, year of construction 1993for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight approx.: 200 kgSpeed: 17200 rpm.With- Cooling lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Coming for sale : Peacock P1200 S , 2002 Under power If interested please contact