skoda w used for sale

Electric motor, three-phase motor -Manufacturer: Skoda type 2.4 kW 1410 rpm -Power: 2.4 kW -Voltage 220/380 V -Shaft: Ø 24 mm -Length shaft: 55 mm -Construction: -Dimensions: 335/300/H230 mm -Weight: 36 kg

turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8196 Type: SRM 125 CNC Producer: ŠKODA Created: 1974, GO 2010 Parameters: Control system: Heidenhain Manual Plus 4110 Maximum turning length: 3000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Length: 8000 mm Width: 3000 mm Height: 2100 mm Weight: 16350 t Equipment: Fixed bezel Technical documentation Front panel Cutter head Universal chuck

table length: 2000 mm table width: 2000 mm table load: 25 t table rotating: 360 ° Control: total power requirement: 4 kW weight of the machine ca.: 8,2 t dimensions of the machine ca.: 3 x 2,9 x 0,9 m Boring mill table Skoda E25A - Boring mill table Skoda E25A - Dead weight: 8,2t - Max. Clamping weight. 25t - First commissioning: 1996 - Decommissioned and stored since 2014 - All axes are electrically controllable and ready for operation - 360° rotary drilling table ready for operation - Dimensions: see data sheet - Heidenhain rotation measuring system with digital display ready for operation - Heidenhain linear measuring system with digital display ready for operation - Boring mill table fully functional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1440 mm turning diameter over slide rest: 960 mm turning length: 8200 mm faceplate: 1250 mm bed width: mm turning diameter in the gap: 1460 mm length of gap: 460 mm turning speeds: 1,8-400 U/min steady: workpiece weight: 22000 kg total power requirement: 46 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling this machine. Plugged in, can be tested. Very good condition. Documentation for the machine. Can be sent via whatsapp video of the machine

- Center height 1700 mm - Can be extended or shortend to matching height as they are 2 peices - Central lubrication - Each steady rest equipped with 3 point - Driven / Morotized units

We are selling this lathe. It can be tested when connected. Accessories included with the machine. Turning diameter: 2,000 mm Turning length: 10,000 mm Workpiece weight (max.): 60,000 kg Machining diameter: 2,000 mm

spindle diameter: 150 mm x-travel: 9000 mm y-travel: 5000 mm Control: FANUC 31i-B spindle taper ISO: 50 dimension of the ram: 400 x 400 mm z-travel: 1200 mm w-axis: 1000 mm number of spindle speeds: 1 - 3000 U/min main drive motor: 71 kW rotary table:: table surface area: 2500 x 3000 mm table load: 30 t V-axis: 2500 mm b-axis: 0,0001 / 360 ° feeds x/y/z -stepless: 0,5 -20000 / 15000 mm/min total power requirement: - kVA weight of the machine ca.: - t Equipped with: - FANUC 31i-B CNC control - 2-axis milling head 0-360° / +/- 95° - 60-position tool changer (ISO 50) - Skoda TDV 30 NC boring mill table (2500 x 3000 mm, 30 t) - Coolant system with paper belt filter - Hydrostatic guides on all axes - Tool management - Renishaw RMP 60 workpiece measurement - AAC station for 4+1 heads -- IFW 12 C-E angle milling head, 1° head rotation, external cooling, 25kW, 3000rpm -- IFVW 101 C-E angle  ...

spindle diameter: 150 mm x-travel: 14000 mm y-travel: 5000 mm Control: FANUC 31i-B spindle taper ISO: 50 dimension of the ram: 400 x 400 mm z-travel: 1200 mm w-axis: 1000 mm number of spindle speeds: 1 - 3000 U/min main drive motor: 71 kW rotary table:: 2 Stck table surface area: 4000 x 4000 mm table load: 70 t V-axis: 2500 mm b-axis: 0,0001 / 360 ° feeds x/y/z -stepless: 0,5 -20000 / 15000 mm/min total power requirement: - kVA weight of the machine ca.: - t Equipped with: - FANUC 31i-B CNC control - 2-axis milling head 0-360° / +/- 95° - 60-position tool changer (ISO 50) - 2x pcs Skoda TDV 70L NC boring mill table (4000 x 4000 mm, 70t) - Coolant system with paper belt filter - Hydrostatic guides on all axes - Tool management - Renishaw RMP 60 workpiece measurement - AAC station for 4+1 heads -- IFW 12 C-E angle milling head, 1° head rotation, external cooling, 25kW, 3000rpm -- IFVW  ...

WORKING RANGE TURNING   swing diameter (max): 2000 mm   worpiece length max.: 10000 mm   workpiece weight max.: 60000 kg The machine was completely overhauled in 2004.Accessories: various bezels, as shown in the pictures.

  - Tandem construction on 1 bed left headstock + right headstock - Mirror double tailstock left and right  - Double carriage  - Steady rest included - Roller rest included - Opperator panel with scales needs attension and replacement  - Motorized tailstock for each side left and right - 3 bed way construction - Torq on chuck 160.000 Nm - Minimum turning diameter Ø 315 mm   - Field off indurstrie: - Ship yard - Propeller shaft - Hydraulic cylinder shaft - Camshaft - Defence & Aeronautica - Rolls and Shaft for steelmills - Crankshaft

The machine is in very good technical condition, testing is possible by prior arrangement.

table length: 3000 mm table width: 4000 mm table load: 80 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information.

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

YC2500HR large format printer was built in 2019 in China by Linyi Win-Win Machinery Co., Ltd. With the latest sixth-generation RICOH printheads, the machine allows for efficient UV printing on virtually any material on the market. UV inks, compared to standard pigments, form a durable layer on the surface of the substrate that is resistant to various external factors, so the print can, for example, be exposed to intense sunlight. The printing process is executed after choiceing the appropriate profile (preset) for the material in the software. The industrial wide format printer has pre-programmed profiles for materials such as glass, paper, plastics, etc. After this, the machine automatically overlaps the material, measures it and lowers the heads to the material thickness. The carriage with the heads moves on a magnetic rail (so-called ‘maglev’) and a magnetic cushion. This type  ...

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

- Condition: used - Baking Plate Amount: 95 Baking Plates - Capacity: approx. 5,400 pieces / Hour - Cone Size: max. 120 mm Equipment: - incl. Drum Roller - incl. Conveyor - incl. Cooling Tower - incl. Stacking Table

150,000 litres of V2A horizontal hard water/soft water tank Properties: Volume 150000 L Material V2A (AISI 304) 1.4301 Total height 4200 mm Inner diameter 3600 mm Overall length 13500 mm Cylinder length 12000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Description: Tank 1/2 - hard water tank Tank 2/2 - Soft water tank Tank crest: Ventilation nozzle Filling nozzle 2 CIP balls In front: Cone base Manhole 450 x 350 mm oval Residual drain with flanges with disc valve Thermometry Tank body: Reinforcement rings Behind: Cone base

Hello, We hereby offer you a walk-through metal detector of the manufacturer CEIA, type SDM 600 PLUS/PZ (stock goods) of the manufacturer CEIA. Manufacturer CEIA GmbH, Wiesbaden, Germany Type SDM 600 PLUS/PZ, with integrated, highly sensitive MI2/MSD sensors in both antennas Year of purchase 2022 Possible areas of application: Security checks at airports, cargo facilities, government and correctional facilities, government, industry and nuclear power plants, major public events, trade fairs, congresses, checkpoints, access controls in high-value areas, etc. Technical data and description: Very high passenger throughput with a speed of up to 15 m/s and a reset rate of 0.2 s. High rate of discrimination against personal items (glasses, belts, keys, watches, coins, etc.) meets the strict standards of airport security checks. Compliant with the NIJ-0601.02 law enforcemen ...

We can offer you all types of Wafios nail machines from S25 - N90

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

We offer wire looms asking for current offers. abc.steinfels-kg.de

Ladies and gentlemen, Below you will receive a non-binding offer for railway spare parts for all common railway coaches and railway freight wagons new and partly used: Wheelsets All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. Inte ...

We can offer you all types of Wafios nail machines from S25 - N90

Hexagonal socket wrench SW 10 x 7 mm deep, blade made of chrome - vanadium - steel and chrome-plated, blade length approx. 125 mm, shaft D = 8 mm, head D = approx. 14.80mm transverse stitch 90 mm made of polyamide GF 30,total length approx. handle approx. 155 mm. Caption on the cross handle: Made in Germany and on the blade Crom Vanadium 10 There is still a residual stock of approx. 600 pieces available. IT can also be dispensed smaller batch sizes. 1 - 600 pieces / VS €/piece

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

HT Water pump,Type WD-90L240 Kolmeks WD90L240 Part number: 191001

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

Gear wheel, crankshaft Part no. 110014 NEW

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL

NEW! Part number: 200960 12 cylinder ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Flat cutter 315 mm

Make: CLIMAVENETA Type: WRAT/SL 0802 Power: 200 kW (100KW) Refrigerant: R407C Built: 2006 2 pcs. compressors Make: DWM Copeland Semi-Hermetic Type: D6SJ1-400X-AWM/D One circle is defective, others are OK. Price on request

Abbot dressing plant for chemical (Basic) media (ammonium sulphate) the plant has been used year 2010 (pump 2012) 1 x, then the company has been closed with wild diaphragm pump with ARTA dry clutch DN15 - DN150 complete documents, certificates, declarations of conformity of the individual components possibly Verohrung to but not part of the sale 2011 was once again a wild pulsation dampers for 2800,-€ upgraded Material - new price 17.000,-€, used only by the finest components from ARTA, Düperthal, wild