skoda w used for sale

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 15000 mm y-travel: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

spindle diameter: 200 mm x-travel: 16200 mm y-travel: 5250 mm z-axis: 1600 mm w-axis: 1990 mm spindle turning speed range: 0,9 - 930 U/min feeds: 6000 mm/min rapid traverse: 6000 mm/min dimension of the ram: 520 x 520 mm main drive motor: 77 kW Control: Heidenhain TNC 530 tool taper: ISO 60 total power requirement: 180 kVA weight of the machine ca.: - t dimensions of the machine ca.: 20 x 12 x 8 m 2008 modernised with new electrics, motors and controls equipped with: - Control Heidenhain TNC 530 - Rotary Table SEA60 3500 x 4000mm, 60t - coolant system - chip conveyor - angular milling head - without floor plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling this machine. It can be tested when connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100. The machine comes with a support column, 6 plates, a rotating table E 20, heads, etc. This is a complete workstation.

spindle diameter: 200 mm Processing width on table: 6000 mm Processing height on table: 3150 mm Processing depth: 1985 mm Slide cross-section: 530 x 550 mm table load: 20 t Plate field size: 16800 x 5500 mm tool taper: SK 60 total power requirement: kW weight of the machine ca.: 173 t dimensions of the machine ca.: m - Additional equipment Angle head large and small - The OB no. is: 22979 - The table is the model S20 MP table Size: 2200 x 2500 mm - The processing width on the machine X -Way is 6000 mm - Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 250 mm x-travel: 12000 mm y-travel: 5850 mm z-travel: 1600 mm w-axis: 2000 mm Control: Siemens type: 840 D Powerline turning speeds: 875 U/min dimension of the ram: 540x560 mm coolant: 1800 l chip conveyor: total power requirement: kW weight of the machine ca.: 130 t Overhaul of the machine 2010 Spindle mount SK 60/50 with adapter Traversing speed: Axis X/Y: 9,000 mm/min. Travel speed: Z/W axis 4,000 mm / min. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on ou ...

x-travel: 11500 mm y-travel: 4500 mm w-axis: 1600 mm z-axis: 2000 mm spindle diameter: 200 mm Rotary table: E25OB23941 2.000x 2.000 mm bed length turntable: 4600 mm tool taper: SK50 : 80 t Plate field size: 10.000 x 15.000 mm tool taper: SK 50 total power requirement: 83 kW weight of the machine ca.: t incl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 extra cost milling head IFH 1 and IV25, IFW 1, IFW2 IFW 3 NO floor plates

Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg

Skoda W200H - CNC Plate Boring Machine – Bearing Sleeve (RAM) Year of construction : 1992 Electrical & Electronics Overhaul : 2021 Spindle : 200 mm ( Ø ) ISO 60 X : 7,800 mm Y : 5,400 mm W : 900 mm ( spindle ) Z : 900 mm ( Carrying sleeve / RAM 520 x 520 mm ) Z1 : 2,000 mm (table) CNC rotary table : 2500 x 2000 mm – 40 T Spindle speed : 0.8 - 800 rpm Rapid traverse speed : 6000mm/min Spindle motor : 75 kw Total power : 140 kW Machine weight : 84 T (approx.) Control : FAGOR 8055 Processing heads 3 pieces 1.Angular translation head 2. Vertical milling head 3.Horizontal milling head Base plate : 4,480 mm x 1,145mm Conveyor

Year of construction construction 1983 Drive power Drive power 83 kW Clamping table Clamping table 2500 x 2500 mm workpiece mass on table Workpiece mass 20 t Processing width on table 5770 mm Processing height on table 2800 mm processing depth 1985 mm Spindle diameter Spindle diameter 200 mm Slide cross-section Slide cross-section 530 x 550 mm Additional equipment Angle head large Angle head small

SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

SKODA WD160B floor type boring mill X Axis 3150 mm Y Axis 2500 mm Z Axis 1600 mm Table 2000x2000 mm Piece weight 20000 kg Spindle diameter 160 mm Max. spindle speed 800 rpm Spindle motor power 75 kW Length x width x height 10000.0 × 5250.0 × 6365.0 Weight 50000 kg New control.

x-travel: 11500 mm y-travel: 4500 mm spindle diameter: 200 mm w-axis: 1600 mm z-axis: 2000 mm Rotary table: 3000 x 4000 mm tool adaptor: 80 t bed length: 4600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m incl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dear's Sale, used 2 complete engine Skoda 27.5 with R/G Also, cover, piston, liner, conrod new/used, fuel pump, 6cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

2pcs 3500 x 2000 x 350 mm price 7000eur/pc

4 pcs 5600 x 1885 x 400 mm price 10500eur/pc

Press Type: Twin Cavities Mold Type: Segmented Type of Tires: Passenger and Light Trucks Bead Diameter Range: 16â â 20â Closing force: 650,000 Lbs / 3680 KN Heating System: Steam Bladder System: Hydraulic Water Max. Pressure: 20 Bar Power Supply: 18.5 KW, 380 V / 50 Hz Loader: Available Controls: Simatic S7

Table dimensions: 2000 x 2000 mm Table height: 890 mm Table displacement: 1,200 mm Maximum table load: 20 tons. Electrics: 400 V / 50 Hz

P64 - used appr. 46 m³ / 46,000 litres polyester tank / GRP tank, aboveground, vertical, flat bottom tank, Skoda tank. volume: appr. 46 m³ / 46,000 litres material: polyester / GRP diameter: Ø appr. 3.10 m height: appr. 6.50 m Skoda tank, aboveground, vertically standing tank, flat floor, dome upon the tank body, multiple connections, in- and outlets. Tank as shown on the pictures. The container can be used as a storage tank for many different media, such as water, liquid food, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rainwater tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar on ...

on photo

2pcs 3250 x 1885 x 400 mm

6 pcs 6400 x 1885 x 400 mm

P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

Rotary table E20 Table working surface 2000x2000mm Table height 910 mm The biggest load of the workpiece table 200000N Movement for sleigh bed 1200 mm Longitudinal feed 2,8-8-22.4 mm min-1 Circular shift on average of 2000 mm 5.8-16.4-48.1 mm min-1 Rapid longitudinal 1245 mm min-1 Rapid circular diameter of 2000 mm to 2600 mm min-1 4kW electric engine for the displacements Floor surface 3000x2765mm Table weight 9350 kg

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

The machine is in good technical condition, after prior agreement it is possible to test it. General repair including major modernization (retrofix) on CNC control including automatic central lubrication of axes + hydraulic systems, water cooling, conductive rollers with brushes for the system of possible welding of the workpiece and complete covering against chip flying. Swing diameter: above the bed 1250mm above the slide 900mm Control system: Heidenhain manual plus 4110 Max. workpiece weight: 14,000Kg Max. workpiece length: 3,000mm Machine weight: 16,350Kg Machine power: 80 Kw Machine dimensions: width 3000mm height 2100mm length 8000mm Supplied accessories: Face plate including handles, support (steady rest), raised cutter head, universal chuck, etc.

For sale comes: 1 used clamping/boring table Manufacturer: Skoda Type: E20OB22875 YEAR: 1989 Dimensions 2,000 x 2,000 mm Part weight: up to 25t electr. adjustable Mass: 10t

For sale used angle head, angle milling head ŠKODA

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

milling device for Skoda lathe SUT160

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

1 boring mill turntable Make: Skoda Model: S 60 Year of construction: 1987 Table size: 4000 x 3600 mm Table load: 60 tons. Rotatable. 360 degrees Longitudinal travel: 1100 mm Weight: 38 to.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 130 mm -Plate thickness: 20 mm -with: support ribs -Weight: 112 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg

2 clamping brackets Dimensions: 3000 x 1200 mm

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Key data: 1400 , 1000 , 11280

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW

Inv. Num. : 7576 Type: WI 130 Producer: ŠKODA Created: 1969 GO 2008 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2000 mm Work table width: 1800 mm X-axis travel: 1900 mm Y-axis travel: 1980 mm Travel travel Z-axis: 1250 mm