sinumerik used for sale

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- MAX SHEET LENGTH: (X/Y) - 2530 / 1270 MM - TABLE MAX PUNCHING DIAMETER: 89 MM - NUMBER OF TURRET STATIONS: 20 - PUNCHING FORCE: 200 KN -CONTROL UNIT: SIEMENS SINUMERIK 840D The machine is in excellent shape and powered. Any visits and inspections are welcome.

INDEX GSC 65 CNC Lathe YOM 1997, installed 1998 Turning diameter in chuck 250 mm Swing Ø above bed, max. 300 mm Turning length 400 mm Control: Index C 200-8 (Sinumerik 880) Axes X/Z/C Travel of Slides: Turret 1- X / Z travel 163 / 550 mm Turret 2- X / Z travel140 / 250 Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5000 rpm Feed range 0 - 15000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories & Spare parts -SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8). Changed monitor. -Hydraulic high-power chuck ROHM HS 200/3 -Tailstock -Turrets: 3 -Rotation tools in Turret 1- 2, in Turret 2- 3. -Milling spindle- tool in Turret 2 -Tool stations: 8 / 12 / 8 + 28 tools in magazine -Coolant device with chip conveyor. -A lot of spares and accessories

GeneralTwo- Spindle Turning Centre; Control: Sinumerik 840C Tool holder 2Shank diametre according to DIN 6988030 mmNumber of tool stations12 Number of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWSlide 3 (Spindle 2)Longitudinal stroke600 mmRapid traverse Z30 m/minFeed rate torque (100% DC) in Z700 daNSlide 2Longitudinal stroke555 mmTransverse stroke190 mmRapid traverse X20 m/minRapid traverse Z30 m/minSlide 1Longitudinal stroke555 mmTransverse stroke190 mmY axis, vertical+/- 40 mmRapid traverse in X20 m/minRapid traverse in Z30 m/minRapid traverse in Y7,5 m/minFeed rate torque (100% DC) in X/Y/Z400/700/700 daNMain drive 2Type of main driveAC Drive power (100% DC)14 kWDrive power  ...

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250 mm grinding length: 650 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Glauchau Type: SI 6/3 CNC brand: Siemens CNC model: Sinumerik Year of make: 1997 CNC controlled Maximum grinding depth: 250 mm Grinding diameter: 650 mm ø Rapid traverse: 10 m/min Speed: 50 - 500 RPM Inner grinder X (inner grinding device): 155 mm Length displacement interior grinding device on the table: 540 mm Tool grinding device Z (table move): 700 mm Circulation diameter: 650 mm ø Grindig diameter for internal grinding: 10 - 500 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf Trumatic L 3030 Laser Cutting Machine Power:4000 W Machine is in working condition Dust collector,chiller and spare parts are included Control unit : SINUMERIK 840D

Date of overhaul: 2006 Swing over bed: 4000 mm Distance between lathe tips: 30 000 mm Speed: 0,5-80 rpm Workpiece weight:160 t Control system: CNC SIEMENS SINUMERIK 840 D

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840C Technical data Number of spindles: 2 Number of revolvers: 2 Spindle hole: 65 mm Turning diameter: 200 mm Turning length: 400 mm Turret slide: Number of positions turret 1: 14 Number of positions turret 2: 14 Driven tools turret 1: 14 Driven tools turret 2: 14 Spindle speeds: 6000 rpm Power of driven tools: 5.5 kW Inner cone DIN: 69 880 Indexing time: 0.4 sec Upper turret head: X axis: 155 mm Y axis: 120 mm Z axis: 400 mm Lower turret head: X axis: 105 mm Z axis: 400 mm Main spindle:: HAINBUCH Internal spindle diameter: 60 mm Spindle speeds: stepless up to: 6000 rpm Back spindle:: HAINBUCH max. speed: 6000 rpm Internal spindle diameter: 60 mm Spindle diameter: 160 mm Back spindle stroke: 445 mm Rapid traverse X: 22.5 m ...

turning diameter: 220 mm turning length: 200 mm control: Siemens Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf Trumatic L2530 laser cutting machine CO2 laser cutting machine made by Trumpf with a laser power of 3.0kW Machine equipped with TLF3000t lasers source and sheet metal charging system CNC: TRUMPF Based on SIEMENS Sinumerik 840D

- 115mm cutting head - Conveyor belt on the left - Nozzle changer - LoadMaster with sheet separator - Warehouse interface - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 7 kW - Maximum material thickness mild steel: 30 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 20 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 49.815 h - Beam ON Working hours: 27.724 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of spindles: 2 Number of revolvers: 2 Spindle hole: 65 mm Turning diameter: 200 mm Turning length: 400 mm Turret slide: Number of positions turret 1: 14 Number of positions turret 2: 14 Driven tools turret 1: 14 Driven tools turret 2: 14 Spindle speeds: 6000 rpm Power of driven tools: 5.5 kW Inner cone DIN: 69 880 Indexing time: 0.4 sec Upper turret head: X axis: 155 mm Y axis: 120 mm Z axis: 400 mm Lower turret head: X axis: 105 mm Z axis: 400 mm Main spindle: Internal spindle diameter: 60 mm Spindle speeds: stepless up to: 6000 rpm Back spindle: max. speed: 6000 rpm Internal spindle diameter: 60 mm Spindle diameter: 160 mm Back spindle stroke: 445 mm Rapid traverse X: 22.5 m/min Rapid traverse Z: 45 ...

Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...

GeneralTurning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline Technical DataDrive power (100% DC)13,2 kWDrive power (40% DC)22 kWTorque (40% DC)100 NmSpeed range20-12000 rpmB axis, slide 1Swivelling range+/- 120 degreeSlide 3Transverse stroke1500 mmRapid traverse Z36 m/minSlide 2Longitudinal stroke1400 mmTransverse stroke225 mmRapid traverse X24 m/minRapid traverse Z40 m/minSlide 1Longitudinal stroke1585 mmTransverse stroke550 mmY axis, vertic ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

Distance between lathe tips: 25 000 mm Swing over bed: 1800mm Speed: 0,45-91 rpm Workpiece weight: 70t Control system: CNC SIEMENS Sinumerik 840 Main motor power: 80 kW

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Operating hours: 48.000 - Axis speed [X axis] max: 150 m/min - Compressed air pressure min: 6 bar - Control type: Siemens Sinumerik 840D - Punch diameter max: 89 mm - Power supply: 80 kVA - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 4 mm - Oil tank capacity: 400 l - Material thickness stainless steel max: 3 mm - Weight: 28.000 kg

Hole diameter maximum: 0 mm Grinding wheel diameter: 0 mm Workpiece height maximum: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 805 (Hardware 80310, Software 4.1) Technical data Max. work piece diameter: ca. 20 mm Workpiece length max.: 100 mm Motor capacity: grinding spindle: 0.5 kW Voltage: 380 Volt Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1750 mm Width: 1400 mm Height: 2200 mm Various accessories: Dust extractor Automatic extruder Security-protection panel Workpiece loader Workpiece conveyor

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 M / 6 FC 4101-1MA00-Z Technical data Table length: 1000 mm Table width: 630 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 400 mm Travel of the vertical slide: 510 mm Max. angle with taper grinding: up to: 7 ° Vertical travel of grinding spindle: up to: 120 mm Travel speeds: stepless up to: 5 m/min Planetary motion speeds: c axis stepless from: 1 rpm up to: 250 rpm Possible grinding-spindle speeds: stepless from: 5000 rpm up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 10 kW Machine´s weight about: 5000 kg Overall dimensions machine: Length: 4200 mm Width: 2800 mm Height: 3150 mm Various accessories: Tool cabinet: 2 Centering device: 2 Vice: width: 2 x 160 mm Dust extractor Coolant system Centeri ...

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of positions: 16 Number of positions with indexationNumber of posit: 8 Number of working positions: 24 Tool lenght: max: 150 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 6500 kg Overall dimensions machine: Length: 9800 mm Width: 4000 mm Height: 2900 mm Various accessories: Positions CNC: 2 pce Oil mist extractor: ELBARON Bar loader number of bars

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Operating hours: 30860 Technical data Table length: 1600 mm Table width: 500 mm Axial motion: Longitudinal travel (X-axis): 1640 mm Cross travel (z-axis): 580 mm Grinding wheel: Diameter: 400 mm max. width: 100 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 11000 kg Overall dimensions machine: Length: 4900 mm Width: 3300 mm Height: 2600 mm Dimensions electric cabinet: Length: 1600 mm Width: 600 mm Height: 2000 mm Various accessories: Refrigerating device for cooling device Magnetic plate: Length: 1580 mm Width: 500 mm Wheel trueing attachment Set of flanges

Workpiece width maximum: 0 mm Workpiece length: 0 mm Grinding machine type: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 4000 Technical data Table length: 800 mm Table width: 430 mm Max. distance from table to spindle centreline: 735 mm Table load max.: 800 kg Grinding length: 880 mm Grinding width: 510 mm Grinding wheel: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel speeds: stepless up to: 35 m/min Table speeds: stepless from: 1 m/min up to: 40 m/min Creep feed: from: 0.1 m/min up to: 1 m/min Automatic cross feed: stepless from: 0.1 mm/min up to: 5000 mm/min Automatic vertical feed: from: 0.1 mm/min up to: 5000 mm/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 15 kW Total power required: 30 kVA Machine´s weight about: 6500 kg Overall dimensions machine: Length: 2350 mm Width: 3150 mm Various accessories: High pression colan ...

Only used for tests Includes: Double table New welding head - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 4.000 x 1.500 (2 x 2.000 x 1.500) mm - Positioning speed X / Y / Z: 100 / 100 / 100 m/min. m/min - Maximum axis speed of B Axis: 90 1/min - Maximum axis speed of C Axis: 90 1/min - Laser Output: 6 kW - Control: SIEMENS Sinumerik 840D - Machine ON Working hours: 31440 - Beam ON Working hours: 3.242 - X Axis travel range: 4.000 mm - Y Axis travel range: 1.500 / 2.000 mm - Z Axis travel range: 750 / 1.000 mm - B Axis travel range: ? 135 ? - C Axis travel range: n x 360 ? - Position accuracy of linear axes (X / Y / Z): 0,08 mm mm - Positioning accuracy of rotary axes B / C: 0,015 ? ? - Dimensions (long x wide x high): n/a mm

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 49.715 h - Beam ON Working hours: 18.000 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

Manufacturer TRUMPF Type L 3030 Year of construction 2005 Working range 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840D Laser power 2,700 watts Accuracy +/- 0.1 mm Equipment: Rotolas Closed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Control Siemens: Open PC-based controller, simple operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam photoelectric sensors, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin DIAS height control Automatic focus position adjustment AutoLas Plus Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, visit by appointment. Errors in the technical data and pri ...

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine has 30tns, 30001500, sheet thickness max 8mm, stamping speed 1100 hits/min, max positioning speed x/y 80/160, simultanious 100m/min, Siemens 840D, - scrap conveyor SC1T - Lifting scrap conveyor SC2 - Sheet lubrication, - Tool lubrication - Light guards 5 - safety net LD3000 - GSM Alarm - RS scrap conveyor - Lifting scrap conveyor RSC2 - tool adjust ACS - C1500 sorting belt conveyor - STS 3015 stacking system. - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: 45.000 - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Axis speed [X axis] max: 150 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness ...

Key data: 2200 Siemens, 750 Sinumerik 820 GA3, 500

Grinding length: 2200 mm Grinding width: 750 mm Grinding height: 500 mm Wheel diameter: 500 mm Spindle power: 75 kW CNC Brand: Siemens CNC Model: Sinumerik 820 GA3 equipped with table dresser X – Travel:              2.200mm Y – Travel:              750mm Z – Travel:              500mm Table Length:            2.200mm Table Width:             500mm Feed rate X-Axis:        15.000mm/min. Feed rate Z-Axis:        10.000mm/min. Grinding stone dimensions:500 x 240 mm Power:                   75kW Speeds:                  8000Rpm Coolant system:        ...

Lathe MAS Kovosvit MT 70/ 2000 CNC, Siemens Sinumerik system, year of manufacture 2004 is in good technical condition. Circulating diameter above the bed: 820 / max / mm Distance between spikes: 2000 mm Spindle drilling: 106 mm Spindle speed - range: 1800

Key data: 300 Siemens, 285 Sinumerik, 8

Turning diameter: 300 mm Turning length: 285 mm Turret positions: 8 CNC Brand: Siemens CNC Model: Sinumerik Make: HYUNDAI Type: HIT 8 S Control: Siemens Sinumrik YOP: 1996 Max. turning Ø:300mm X-Axis:        100mm Y-Axis:        290mm Spindle bore:  40mm Speedrange:    6000Rpm Spindle power: 11kW ATC / revolver:8 Length:        1.800 mm  Width:         1.370 mm  Height:        1.800 mm  Weight:        2.600 kg 

Drilling capacity: 500 mm Drilling depth: 0 mm Spindle taper: 40   Number of drilling spindles: 2   CNC Brand: Siemens CNC Model: Sinumerik Make Degen UTB 4 Type UTB 400 - 2 Year 2006 Siemens Sinumriek Tapping capacity (mm)Stroke = 500 mm Drilling capacity (mm)Double spindle Distance Column/center (throat) mm Taper SK 40 Tapping depth (mm)    iKZ Coolant Filtration system Twin spindle machine Optional Large tooling package  

Control unit Siemens Sinumerik 840D Passage over the bed 650 mm Passage diameter over the bed 380 mm Distance between centers 3000 mm Spindle bore 105 mm Number of ranges 2 (automatic change) Spindle speed 2 - 2000 rpm Tailstock quill diameter 100 mm Tailstock quill extension 200 mm Tailstock taper 6 Morse Traverse travel 370 mm Weight 5500 kg

Turning diameter: 505 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: Sinumerik Make DMG Gildemeister Type CTX 410 Live tooling Year 2004 Dmg Gildemeister ctx 410 with CNC Siemens Centre height (mm) 505 Diameter Center distance (mm) 600 mm Spindle bore 76 mm CNC Siemens Turret 12 positions Live tooling- Dimensions - Length : 3.175 - Width : 2.080 - Height : 2.000 - Weight : 5.500 Kg  

Universal CNC lathe CTX 510 ecoV63 with control system SIEMENS SINUMERIK 840D SL with Shop Turn. Turning diameter max. 465 mm Turning length max. 1,050 mm Total input 50 kVA Machine weight approx. 7.8 t Space requirement approx. 6.5 x 3.0 x 2.2 m

This INDEX G200 YB Ratioline Lathe was manufactured in 1995 and completely retrofitted in the year 2016. It is equipped with a SIEMENS SINUMERIK 840 C control unit.

This HYUNDAI HIT15s Lathe was manufactured in the year 1999 in South Korea and has 35000 production hours. It is equipped with a HYUNDAI Siemens Sinumerik-840C control unit. The machine has a spindle speed of 4800 rpm. See photo and video gallery for more impressions.

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Working area (X x Y x Z): 6.000 x 2.000 x 115 mm - Max. workpiece weight: 1.900 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 5 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SIEMENS SINUMERIK 840D - Consumption values CO2: 1 l/h - Consumption values N2: 13 l/h - Consumption values He: 6 l/h - Beam ON Working hours: 500 h - Dimensions (long x wide x high): 16.100 x 5.200 x 2.000 mm - Weight: 21.500 kg - Electric consumption entire unit: 33 - 67 kW

- With loading system - Laser Type: CO2 - Working area (X x Y x Z): 2.500 x 1.250 x 115 mm - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 84 X+Y m/min - Laser Output: 3,2 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 12 mm - Maximum material thickness aluminium: 8 mm - Control: SINUMERIK 840 D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 34.700 h - Beam ON Working hours: n/a h - Power: installed max: 27 - 53 kW - Dimensions (long x wide x high): 7.800 x 5.400 x 2.300 mm - Weight: 6.500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1150 mm Workpiece spindle speeds NC-programmable: 0 - 3000 U/min Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840D Weight: 7500 kg

This MTRent T22Y Lathe was made in 2019 in Taiwan and has 1294 production hours. It is equipped with a SIEMENS SINUMERIK 828D control unit. The machine has a spindle speed of 4500 rpm.

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg