british flag
Resale Logo

sinumerik used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information injection moulding machinery  Pro-tech Kunststofftechnologie GmbH  http://www.pro-tech.de 
banner logo
start page > keywords sinumerik > results
500 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465488 102

PINACHO SE-200 for sale
Turning Machines (Lathes)


OVERVIEW: Brand: Pinacho Model: SE-200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Location: Spain Origin country: Spain GENERAL DATA: Measurements width: 1 ...
used machine
 
OVERVIEW:
Brand: Pinacho
Model: SE-200
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 2014
Location: Spain
Origin country: Spain

GENERAL DATA:
Measurements width: 1100 mm
Measurements depth: 1875/2150 mm
Measurements height: 1825 mm
Machine weight: 1300 kg

MAIN DRIVE:
Number of spindle: 2
Spindle speed range: 2800 1/min

CONTROL UNIT:
Brand: SIEMENS
Model: SINUMERIK 808D

WORKPIECE:
Workpiece drm: 402 mm

TOOLS:
Max tool diameter: 20 mm
2014
Price  
  ES   request
125493998 102

MONFORTS RNC 5 for sale
CNC Lathe


Weight approx.: 5400 kgcontrol: MONFORTS MCS 800 (SINUMERIK 840 C) turning length: 1000 mmDimensions (l x w x h) approx.: 4800 x 1800 x 1800 mmtoolchanger positions: 12 turning speed range: 40 - 4000 rpmrapid travel rang ...
used machine
 
Weight approx.: 5400 kg
control: MONFORTS MCS 800 (SINUMERIK 840 C)
turning length: 1000 mm
Dimensions (l x w x h) approx.: 4800 x 1800 x 1800 mm
toolchanger positions: 12
turning speed range: 40 - 4000 rpm
rapid travel range: 12/15 m/min
Description: MONFORTS RNC 5 CNC Lathe
- serial no.: 138/21
- supply voltage: 3 x 400 V, 50 Hz
- total connected load: at 20 kW - 40 kVA, at 30 kW - 53 kVA
- swing diameter over bed: 600 mm
- swing diameter over radial slide: 425 mm
- spindle diameter at front bearing: 130 mm
- spindle holder DIN 55026: A8
- material passage: 85 mm
- main drive: three-phase direct drive (100% dc/50% dc): 20/24 kW
- speed range: 40 - 4000 rpm
- max. torque value: 477 / 585 Nm
- feed force of X-axis: 7,3 kN
- feed force of Z-axis: 11,7 kN
- tool turret shaft diameter: 40 mm
- hydraulic actuating cylinder with partial hollow clamping device, diameter: 85 mm
- immersion depth: 500 mm
- coolant tank: 300 l
- coolant pump enhanced: 3 bar, 40 l/min
- with chip conveyor
- for further information see photos
1995
used machinery auction RESALE 4,700 €  
  DE   request
125451832 101

WERNER & KOLB PFZ 1500 for sale
Vertical Machining Center


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.
used machine
 
X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.
1983
Price  
  DE   request
125460795 102

DMG MORI CTX beta 1250 TC 4A for sale
CNC Turning- and Milling Center


turning diameter: max. 500 mmturning length: 1.250 mmcontrol: Sinumerik 840 D sl Siemensswing diameter: 500 mmdistance between spindles: 1.450 mmMain spindle:: turning speed range - main spindle: max. 5.000 min/-1power ...
used machine
 
turning diameter: max. 500 mm
turning length: 1.250 mm
control: Sinumerik 840 D sl Siemens
swing diameter: 500 mm
distance between spindles: 1.450 mm
Main spindle::
turning speed range - main spindle: max. 5.000 min/-1
power capacity - main spindel: 25 / 32 kW
max. Torque: 360 / 280 Nm
spindle head: 170h5
spindle bearing diameter: 130 mm
spindle bore: 77 mm
bar material dia.: 67 mm
usable bar diameter: 65 mm
C-Axis: 360 °
chucking diameter: max. 250 mm
tool magazin::
number of toolpositions: 24 pos.
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 120 mm
max. tool weight: 5 kg
max. tool length: 300 mm
Milling Spindle::
Speed Milling Spindle: max. 18.000 min/-1
power capacity - milling spindle: 22 kW
max. Torque: 100 Nm
tool taper: HSK 63 A
B-Axis: +/- 110 °
axis stroke::
x-axis: 1: 450 (-10) mm
z-axis: 1: 1.300 mm
y-axis: 1: +/- 100 mm
Subspindel::
Spindle speed range subspindle: max. 5.000 min/-1
power capacity - Sub spindle: 25 / 32 kW
bar material dia.: max. 65 mm
chucking diameter: max. 250 mm
C-Axis: 360 °
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40 TriFix
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,3 / 28 kW
max. Torque: 7 Nm
switching time: 30°: 0,4 sec
axis stroke::
x-axis: 2: 195 mm
z-axis: 2: 1.200 mm
total power requirement: 70 kVA
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m
Documents:
Chip conveyor:
Milling spindle:
Coolantsystem:
high pressure coolant: 20 bar
hydraulic system:
Automatic Tool Changer: 24 pos.
work light:
C-axis: 2x
B-axis:
Y-axis:
hollow chuck unit:
Subspindle:
direkt probing: X1 / Y1 / Z1 / X2
Parts removal:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: LNS SuperHyd. 6.50-6.68 4,4m
Tailstock function counter spindle:
steady-rest on turret: SMW - SLU2X / 8-101mm
5-Axis CNC - Turning- and Millingcenter
DMG MORI - CTX beta 1250 TC 4A

- Main- Sub- and Millingspindle
- lower turret
- Conrol: Siemens Sinumerik 840 D sl Ergoline / Shopturn 3G
- 5-Axis-Simultaneous-Machining
- Betriebsstunden: Strom-Ein: ca. 7.500h / Spindellauf: ca. 2.000h



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125451778 102

INDEX GE 65 NC for sale
Lathe


Turning diameter: 175mm, turning length: 400mm, number of tool slots: 14, swing: 370mm, control: SIEMENS SINUMERIK, length: 2500mm, width: 2000mm, height: 2000mm.
used machine
 
Turning diameter: 175mm, turning length: 400mm, number of tool slots: 14, swing: 370mm, control: SIEMENS SINUMERIK, length: 2500mm, width: 2000mm, height: 2000mm.
 
Price  
  DE   request
125443047 102

MAKTEK JERZY ZALEWSKI, POLAND Cormak CKT 500 x 850 for sale
CORMAK CKT 500 X 850 lathe, Sinumerik 808


Automated CNC lathe designed for advanced machining in industry. Machine dedicated to serial production, prototype production, mass production. General condition of the machine good.
used machine
 
Automated CNC lathe designed for advanced machining in industry. Machine dedicated to serial production, prototype production, mass production. General condition of the machine good.
2016
15,500 EU?  
  PL   request
125451743 106

TRUMPF Trumatic 3000R-1300 for sale
Punching Machines


Type || Punching machine Manufacturer || Trumpf Model || Trumatic-3000R 1300 Year of Manufacturing || 2004 Control || Siemens Sinumerik 840D Electrical Consumption | 18 kW | Available for Delivery || IMM Max. To ...
used machine
 
Type || Punching machine
Manufacturer || Trumpf
Model || Trumatic-3000R 1300
Year of Manufacturing || 2004
Control || Siemens Sinumerik 840D
Electrical Consumption | 18 kW |
Available for Delivery || IMM

Max. Tonnage | 18 t |
Max. Capacity | mm | 6.4
X Axis Travel | 2,550 mm |
Y Axis Travel | 1280 mm |
Y Axis Velocity | mm/90/60 min |

Function Multi Tool
Function Threat Forming Function Engraving Function Multi Share Function Multi Bend
Set of cassettes and used tools
2004
Price  
  DK   request
125401666 101

TOS CNC Model for sale
Borers (Table type)


Spindle diameter: 100 mmCross X: 1250 mmVertical Y: 900 mmTable length: 1120 mmTable width: 1000 mmPositions ATC: 0  Number of pallets: 0  CNC Brand: SiemensCNC Model: Sinumerik MAKE   TOS Varnsdorf TYPE  ...

 

Spindle diameter: 100 mm
Cross X: 1250 mm
Vertical Y: 900 mm
Table length: 1120 mm
Table width: 1000 mm
Positions ATC: 0  
Number of pallets: 0  
CNC Brand: Siemens
CNC Model: Sinumerik

MAKE   TOS Varnsdorf


TYPE    WH 10 CNC


YEAR   80 er


SPECIFICATIONS


Controll    Siemens Sinumrik


Floor or table type borer  Table borer


X - Travel   1250 mm


Y - Travel     900 mm


Z - Travel     630 mm


W - Travel   1000 mm


Spindle Diameter Ø   100 mm


Spindle Taper    ISO 50


kW power on spindle   30 kW


Spindle speeds / ranges    1300 Rpm


Table Length x Width    1120 x 1000 mm


Table load in kG    3000 Kg


Number off controlled axis    4


DIMENSIONS


Length    4500 mm


Width      3800 mm


Height     3200 mm


 
Price  
    request
125437036 101

CHIRON FZ-16 FZ16 for sale
Numerically Controlled Machining Centres


Single-spindle machining centre CNC milling machining centre Chiron FZ-16 Built in 1988 Sinumerik system 3 control Chip conveyor Dimensions Lxwxh 1.9 x 2.9 x 2.7 m Weight 3500 kg The machine is still under pow ...
used machine
 
Single-spindle machining centre CNC milling machining centre
Chiron FZ-16
Built in 1988
Sinumerik system 3 control
Chip conveyor

Dimensions Lxwxh 1.9 x 2.9 x 2.7 m
Weight 3500 kg

The machine is still under power and is fully functional. A visit is always possible in the vicinity of Berlin.

Disassembly and transport is at the expense and at the risk of the purchaser. A professional machine carrier can be conveyed if required.
1988
5,000 €  
    request
125401668 102

TOS CNC Model for sale
Turning machines, Vertical


Turning diameter: 1300 mmTurning height: 1150 mmChuck diameter: 1000 mmNumber of chucks: 1  CNC Brand: SiemensCNC Model: Sinumerik MAKE   TOS CZ TYPE    SKJ 10 B YEAR   1987 SPECIFICATIONS  ...

 

Turning diameter: 1300 mm
Turning height: 1150 mm
Chuck diameter: 1000 mm
Number of chucks: 1  
CNC Brand: Siemens
CNC Model: Sinumerik

MAKE   TOS CZ


TYPE    SKJ 10 B


YEAR   1987


SPECIFICATIONS


Controll    Siemens Sinumrik


Max. turning diamter Ø   1300 mm


Table / chuck size  Ø  1000 mm


Workpiece height   1150 mm


Work piece weight   2500 Kg


Horizontal movement support / ram  750 mm


Angle adjustment / ram swivable  Swivel   


ATC tool changer   5


Power    40 Kw


DIMENSIONS


Length   4100 mm


Width     3400 mm


Height    3100 mm


 
Price  
    request
125436769 102

SPINNER TC80077 SMCY for sale
Turning Machines (Lathes)


OVERVIEW: Brand: SPINNER Model: TC80077 SMCY Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2008 Production hours: 19461 Location: Hungary Origin country: Germany G ...
used machine
 
OVERVIEW:
Brand: SPINNER
Model: TC80077 SMCY
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 2008
Production hours: 19461
Location: Hungary
Origin country: Germany

GENERAL DATA:
Measurements width: 4923 mm
Measurements depth: 1980 mm
Measurements height: 2090 mm
Machine weight: 7500 kg

MAIN DRIVE:
Number of spindles: 1
Spindle speed range: 4000 1/min

CONTROL UNIT:
Brand: SIEMENS
Model: SINUMERIK 840D

MAIN DRIVE:
X-AXIS movement: 360 mm
Z-AXIS movement: 980 mm

ADDITIONAL EQUIPMENT:
1 - High pressure external cooler
2 - VDI 40 tool holder
3 - Electrostatic external air filter
2008
Price  
  HU   request
125386372 103

SHW UF 43 for sale
CNC Bed Type Milling Machine


Weight approx.: 12300 kgDimensions (l x w x h) approx.: 6500 x 5000 x 3100 mmDescription: Control System: Siemens Sinumerik Movement X/Y/Z [mm]: 1.200/1075/900 Spindle: Technology: Spindle with gear steps approximate Spe ...
used machine
 
Weight approx.: 12300 kg
Dimensions (l x w x h) approx.: 6500 x 5000 x 3100 mm
Description: Control System: Siemens Sinumerik Movement X/Y/Z [mm]: 1.200/1075/900 Spindle: Technology: Spindle with gear steps approximate Speed: 4.000 rpm Taper: SK50 Horizontal-vertical-head: Hirth serration Universal-milling table: Clamping surface: 1.100 x 850 mm Equipment / Add-ons: Tool holder: approx. 50 pieces SK50 taper ATTENTION: Machine is dimantled and already stored. Inspection under power is not possible! The exact dimensions and furhter details see at pdf and pictures.
1991
used machinery auction RESALE 9,000 €  
  DE   request
125436689 102

CKD BLANSKO SKJ 50-100 for sale
Vertikal Turning Machines (Lathes)


Producer . CKD BLANSKO - OS Year manufacture/Year overhaul . 1993 / 2006 Control system Siemens . Sinumerik 840 D Max. diameter of workpiece . 10000 mm Clamping diameter of rotary table . 4770 mm Max. workpiece  ...
used machine
 
Producer . CKD BLANSKO - OS
Year manufacture/Year overhaul . 1993 / 2006

Control system Siemens . Sinumerik 840 D
Max. diameter of workpiece . 10000 mm
Clamping diameter of rotary table . 4770 mm
Max. workpiece height . 4240 mm
Max. load of table . 100 000 kg
Machine weight . 121000 kg
Machine dimensions l x w x h . d 15910 x š 10600 mm

retrofit 2006
- Siemens 840D CNC system
- C axis: conversion for use with boring and milling tools
- new drives
- new electricity (switchboard, ...)
- new central lubrication
- CAPTO clamping
milling head: 1.000 U/min

chip conveyor
2006
Price  
  DE   request
125363226 112

SAMPUTENSILI HURTH/MODUL S130 CNC for sale
Gear Hobbing Machine - Vertical


max. wheel diameter:130 mmgear width: mmmax. module:3 min. module: total power requirement:15 kWweight of the machine ca.:6 tdimensions of the machine ca.:2,3 x 2,5 x 2,17 mA well-preserved CNC hobbing machine Vertical f ...
used machine
 
max. wheel diameter:130 mm
gear width: mm
max. module:3
min. module:
total power requirement:15 kW
weight of the machine ca.:6 t
dimensions of the machine ca.:2,3 x 2,5 x 2,17 m

A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor
2000
Price  
    request
125355431 102

DMG GILDEMEISTER TWIN 32 for sale
CNC Turning Centers


CNC lathe Gildemeister twin 32 bearing no 1105-00067 category CNC lathe make Gildemeister type twin 32 year 2007 State second-hand machine control CNC Sinumerik 840 D storage France country of origin Germany delivery tim ...
used machine
 
CNC lathe Gildemeister twin 32 bearing no 1105-00067 category CNC lathe make Gildemeister type twin 32 year 2007 State second-hand machine control CNC Sinumerik 840 D storage France country of origin Germany delivery time after Abspr at cargo base from site technical details Rod diameter 32 mm spindle diameter 100 mm turning length 580 mm speed 25-8,000 rpm per C-axis, 0.001 ° degrees sub spindle indexing Yes / yes Rod diameter 37 mm speed 31-6,300 RPM indexing per C-axis, 0.001 ° degree turret (x-x) 2 x 12 x VDI 25 driven tool stations 2 x 12 control Sinumerik 840 D coolant emulsion pump approx. 50 bar total power 28 kW machine weight 6 tons of space approximately 4.8 x 2.2 x 2 (+ Irco) m S päneförderer Bürener machine factory accessory tool holder 5 rigid, powered 5pcs / off parts conveyor description immediately available.
With 6 axes!
Accessories:
Collet Chuck main & sub spindle TYPE Stanntop 42MM-Spannzangenfutter
1 x set VDI 25 holders CA 10 pieces of it driven without Y axis
WITH LNS RODS LOADING MAGAZINE 2 X CHIP PLIERS FEED SLIDE 42 MAXI
2007
55,000 €  
    request
125349609 102

WEILER Primus 2 CNC for sale
CNC Lathe


turning length: 500 mmgreates pass round over bed: 420 mmturning dia. over face-slide: 220 mmcontrol: SIN3T / 4B powered chuck diameter: 160 mmmaterial diameter: round: 42 mmturning diameter at chucking work: 160 mmlongi ...
used machine
 
turning length: 500 mm
greates pass round over bed: 420 mm
turning dia. over face-slide: 220 mm
control: SIN3T / 4B
powered chuck diameter: 160 mm
material diameter: round: 42 mm
turning diameter at chucking work: 160 mm
longitudinal movement of bed slide: 550 mm
face slide travel: 250 mm
spindle head DIN 55026 - Size: 5
main spindle bore: 51 mm
max. main spindle turning speed: 5.000 U/min.
rapid traverse x + z axis: 7,5/ 12 m/min
disc turret: 12 fach
tool holder -shaft diameter: 30 mm
shaft cross cut - working tool: 20 x 18 mm
tailstock quill taper MT: 3
tailstock adjustment: 450 mm
total power requirement: 30,00 kW
weight of the machine ca.: 4 t
dimensions of the machine ca.: 2,60 x 1,75 x H1,8 m
SIEMENS SINUMERIK 3T control, tail-stock, part-chatcher, SAUTER turret with
12 positions, 4 positions powered.
Machine can be inspected under power.



This ad was created with MODUL MWS - the software solution of LogoTech.
1986
Price  
    request
125355321 104

JUNG JC 500 CNC-E for sale
CNC Surface grinder


Control system: SINUMERIK 805 Travel distances: X: 600 mm Y: 230 mm Z: 400 mm Machine weight: 2700 kg
used machine
 
Control system: SINUMERIK 805
Travel distances:
X: 600 mm
Y: 230 mm
Z: 400 mm
Machine weight: 2700 kg
1995
Price  
    request
125349602 102

EMCO TURN 465 MCplus for sale
CNC Lathe - Inclined Bed Type


swing diameter: 185 mmspindle bore: 73 mmbar material dia.: max. 65 mmtravel x1: 235 mmtravel z1: 270 mmtravel x2: 235 mmtravel z2: 680 mmspindle speed main spindle: 0 - 4000 U/minspindle head: DIN 55026 Gr. A 6 max. tor ...
used machine
 
swing diameter: 185 mm
spindle bore: 73 mm
bar material dia.: max. 65 mm
travel x1: 235 mm
travel z1: 270 mm
travel x2: 235 mm
travel z2: 680 mm
spindle speed main spindle: 0 - 4000 U/min
spindle head: DIN 55026 Gr. A 6
max. torque: 193 Nm
power capacity: 15 kW
spindle speed sub spindle: 0 - 4000 U/min
spindle head: DIN 55026 Gr. A 6
max. torque: 140 Nm
power capacity: 11 kW
feed power X/Z axis: 7000 N
rapid traverse: 24 m/min
tool turret: 2 x 12 Pos.
number of driven tool stations: 2 x 12
tool shaft (cylinder shaft DIN 69880): VDI 30
shaft-Ø: 30 mm
speed of driven tools: 0 - 4000 U/min
max. torque: 16 Nm
C-axis rapid feed: 100 U/min
C-axis resolution: 0,001 °
control: SIEMENS
control: SINUMERIK 840 D
total power requirement: 35 kVA
weight of the machine ca.: 5 t
dimensions of machine: 3,23 x 2,23 x 2,48 mm
Accessories: collet fixture RÖHM on main spindle, various collets,
hydr. 3-jaw chuck RÖHM 175 mmø on sub spindle,
various tool holders for turret, chip conveyor, coolant



This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125338919 102

GILDEMEISTER GD 200 for sale
Turning Machines (Lathes)


Built in 1981 Sinumerik control VDI-holder system Bar loader
used machine
 
Built in 1981
Sinumerik control
VDI-holder system
Bar loader
1981
Price  
    request
125236306 107

FINN-POWER TRS 64 BIF 3/AM for sale
Punching Machine


Weight approx.: 22000 kgDimensions (l x w x h) approx.: 14000 x 10000 x 3000 mmDescription: Punching force 300 kN, cutting force 250 kN, max. operating presure 300 bar, travel paths X 4000 mm, Y 1500 mm, control SIEMENS  ...

 
Weight approx.: 22000 kg
Dimensions (l x w x h) approx.: 14000 x 10000 x 3000 mm
Description: Punching force 300 kN, cutting force 250 kN, max. operating presure 300 bar, travel paths X 4000 mm, Y 1500 mm, control SIEMENS SINUMERIK, punching stroke (max. stroke sequence) 1000/min, see photos for details
 
used machinery auction RESALE 39,000 €  
  BE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Vertical Machining Center WERNER PFZ 1500


X-travel: 2700mm, y-travel: 2300mm, z-travel: 750mm, max. tabel load: 8t, clamping surface of 3 pallets: 1900x1500mm, drive power: 50kW, control: SIEMENS SINUMERIK.

Lathe INDEX GE 65 NC


Turning diameter: 175mm, turning length: 400mm, number of tool slots: 14, swing: 370mm, control: SIEMENS SINUMERIK, length: 2500mm, width: 2000mm, height: 2000mm.

Punching Machines Trumpf Trumatic 3000R-1300


Type || Punching machine Manufacturer || Trumpf Model || Trumatic-3000R 1300 Year of Manufacturing || 2004 Control || Siemens Sinumerik 840D Electrical Consumption | 18 kW | Available for Delivery || IMM Max. Tonnage | 18 t | Max. Capacity | mm | 6.4 X Axis Travel | 2,550 mm | Y Axis Travel | 1280 mm | Y Axis Velocity | mm/90/60 min | Function Multi Tool Function Threat Forming Function Engraving Function Multi Share Function Multi Bend Set of cassettes and used tools

Turning Machines (Lathes) SPINNER TC80077 SMCY


OVERVIEW: Brand: SPINNER Model: TC80077 SMCY Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2008 Production hours: 19461 Location: Hungary Origin country: Germany GENERAL DATA: Measurements width: 4923 mm Measurements depth: 1980 mm Measurements height: 2090 mm Machine weight: 7500 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 840D MAIN DRIVE: X-AXIS movement: 360 mm Z-AXIS movement: 980 mm ADDITIONAL EQUIPMENT: 1 - High pressure external cooler 2 - VDI 40 tool holder 3 - Electrostatic external air filter

Vertikal Turning Machines (Lathes) ?KD BLANSKO SKJ 50-100


Producer ..... CKD BLANSKO - OS Year manufacture/Year overhaul ..... 1993 / 2006 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 10000 mm Clamping diameter of rotary table ..... 4770 mm Max. workpiece height ..... 4240 mm Max. load of table ..... 100 000 kg Machine weight ..... 121000 kg Machine dimensions l x w x h ..... d 15910 x š 10600 mm retrofit 2006 - Siemens 840D CNC system - C axis: conversion for use with boring and milling tools - new drives - new electricity (switchboard, ...) - new central lubrication - CAPTO clamping milling head: 1.000 U/min chip conveyor

CNC Milling Centers SW BA 25


The Centre of the vertical-spindle machining drilling mill SW BA 25 built in 1997. Technical data SW Center BA 25: -CNC control: SINUMERIK 840 SW3 -tool Magazine: 2 x 36 frames SK 40

Laser Cutting Machines BLM ADIGE GROUP LT823D


Laser 3D BLM ADIGE GROUP LT823D for tubes and profiles was built in the year 2010. Technical data laser 3D BLM ADIGE GROUP LT823D: -CNC control: SIEMENS Sinumerik -head: 3D -crystal resonator: Rofin -worked hours: 36979 h Operating data: -the minimum length of the workpieces: 3200 mm -maximum length of details: 6500 mm -maximum weight of workpiece line: 15 kg/m -maximum weight of workpiece total: 100 kg The dimensions of the parts: -round: 12-140 mm -round (optional): 12-152.5 mm -square section side: 12-120 mm -rectangular cross-section and flat oval: maximum described: 170 mm -minimum size: 10 mm -the maximum dimension: 140 mm -the maximum dimension of the side (optional): 150 mm -the maximum difference between the sides: 110 mm -the minimum difference between the sides: 5 mm -maximum load capacity of the loading table: 4000 kg -maximum length of unloading table: 4500 mm Overall dimensions (l x p x h): -the whole installation without content 4500DC K 20/25:15556 x 4600 x 2237 mm -machine: 10514 x 4600 x 2237 mm -the weight of the machine: 9000 kg Hydraulic system: -tank capacity: 25 l -flow rate: 25 l/min -pressure: 70 bar Pneumatic: -pressure: 6 bar -flow rate: > 500 Nl/min

Laser Cutting Machines Trumpf Trumatic L3030


OVERVIEW: Brand: Trumpf Model: Trumatic L3030 Application type: Laser Cutting Machine type: Laser Cutting Machine Availability: 01/08/2018 Construction year: 2001 Laser hours: 40000 Location: Germany Origin country: Switzerland GENERAL DATA: Measurements width: 4700 mm Measurements depth: 9300 mm Measurements height: 2200 mm MAIN DRIVE: Laser brand: TruFlow Laserpower: 4 kW Laser type: Co2 CONTROL UNIT: Brand: Siemens Model: SINUMERIK 840D MOVEMENT: X-AXIS: Movement: 3000 mm Y-AXIS: Movement: 1500 mm MACHINE SPECIFIC DATA: Size of cutting head 1: 5" Size of cutting head 2: 7.5" MAX MATERIAL THICKNESS: Steel: 20 mm Stainless steel: 16 mm Aluminium: 10 mm MEDIA: Main electronic connection: 400 V / 50 HZ Power consumption: 66 kVA Air pressure: 6 bar ADDITIONAL EQUIPMENT: 1 - Lift Master

CNC Laser Cutting Machines Trumpf Trumatic 600L 3kW


Trumpf Trumatic 600L 3kW CNC combined laser punching machine Year 1999 CNC Siemens Sinumerik 840 D about 22.000 + 22.000 horus Lantek software X axis movement 3000 mm Y axis movement 1500 mm X axis speed 90 m/min Y axis speed 60 m/min max spe ...

Horizontal Boring And Milling Centres For Cubical Heckert CWK 500D


Used horizontal machining center HECKERT CWK 500 d Xmm750 Ymm650 (750) Zmm700 Spindle speed 50-10000 (15000) SIEMENS control Sinumerik 840 D Tool magazine 60 positions pallet changer 2000 CE connected load, visible at work, c ...

Vertikal Turning Machines (Lathes) Unkown CKX 5280 x 40/160


Producer ..... Unknown Year manufacture/Year overhaul ..... 2012 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 8000 mm Clamping diameter of rotary table ..... 6300 mm Max. workpiece height ..... 4000 mm Max. load  ...

CNC Turning Machines GILDEMEISTER TWIN 42


bar capacity 45 mm (both spindles) - 2x12 driven position turrets - Y axis in upper turret (+/- 30 mm) - Siemens Sinumerik Control - Iemca Master 880-F barfeed new in 2002 (bundle type) - very well tooled.

CNC Carousel Turning Machines RAFAMET 840


Double column Vertical Lathes RAFAMET Retrofitted in 2000, CNC SINUMERIK MODEL 840 TABLE DIAM. 1300 MM Working height 500 MM They made a wheels for the trains

Horizontal Machining Center HELLER MC 16


X-travel: 630mm, y-travel: 630mm, z-travel: 630mm, B-travel: 360°, spindle rotational speed: 24000/min, number of tool slots: 200, control: SIEMENS SINUMERIK 840D, loading station available.

CNC Lathe HEINEMANN DN 200 SR 12x1250


Swing over bed: 615mm, swing over sledge: 455mm, turning length: 1250mm, revolver head: SR 12, spindle bore: 75mm, control: SIEMENS SINUMERIK 820 T, with chip conveyor KNOLL, machine available after September 2018.

Horizontal Turning Centres Gurutzpe CNC horizontal lathe


CNC Horizontal Lathe GURUTZPE Manufacturer: Gurutzpe YOM: 1974 retrofit 2010 Control: Siemens Sinumerik 820 Turning diameter: 1.380 mm Distance between centers 5.000 mm Center height: 600 mm Swing over cross slide: 1.100 mm ...

Horizontal Turning Machines (Lathes) HEID HEID SDM18-NCC


- Turning diameter on the frame: 1000 mm; - Turning diameter before slide: 890 mm; - Maximum length of the workpiece: 4000 mm; - Spindle motor power: 60 kW; - Maximum speed: 5.6-1120 rpm; - Chip conveyor, 1 piece; - CNC: Sinumerik 8 sprint T.

Horizontal machining center STEINEL BZ20-1


STEINEL BZ20-1 Horizontal machining center control SINUMERIK System 8 x-travel 560 mm y-travel 450 mm z-travel 450 mm rotary table dia. 270 mm rotary table tiltable 0 - 24 ° spindle taper ISO 30 spindle turning speed range 31,5 - 7100 U/min fee ...

Vertical Numerically Controlled Machining Centres Chiron FZ 12 S


X : 550 mm Y : 300 mm Z : 425 mm Control : Sinumerik 810 Table size : 350 x 950 mm ATC : 12

CNC Machining Center BLUTHARDT BZ20


X-travel: 1680mm, y-travel: 380mm, z-travel: 350mm, table dimensions: 4400x420mm, spindle head: SK 40, max. rotational speed: 15000/min, control: SIEMENS Sinumerik, length: 8040mm, width: 2800mm, height: 3100mm, weight: 13t.

CNC Boring Mills CNC SINUMERIK 840D or sim CNC Floor type - single or dou


Feed range X-10000-15000 Y-3000-4000 Z-2000 W-1500 Rotary range 2000-3000 rpm CNC rotary table 3000x3000 table capacity min 25T Spindle diameter 160-200mm Clamping tools-taper ISO 50 CNC control in all axes Max 10 years ...

CNC Laser Cutting Machines TRUMPF TRUMATIC L3050 5kW


5 KW Laser power + LOADMASTER Excellent status. Full working. Machine working hours: 41.319 Working area: 3000 x 1500 x 100 mm Control: Siemens Sinumerik 840 D Max. melt steal.: 25 mm Max. stainless.: 20 mm Max. aluminimum.: 12 mm

Cycle Lathe MASTURN EME / MT500 NC


X-travel: 500mm, z-travel: 1000mm, tool mount: Multifix, control: SIEMENS Sinumerik.

Trapano radiale Invema DC13 65x1600 CN Sinumerik 805


Radial drill Invema DC13 65x1600 CN Sinumerik 805 Technical data: Drilling distance max 1600 mm Solid drilling max 65 mm Full thread max 50 M Sliding sleeve 80 mm 260 mm spindle travel Morse taper of 5 Speed 25 – 2000 RPM Spindle motor power kW 5 ...

Laser Cutting Machines Trumpf Trumatic L4030


Type Trumatic L4030 Year 2006 Type Laserskærer CO2 Manufacturer Trumpf Model Trumatic L4030 Year of Manufacturing 2006 Serial Number A0240A0345 Control Siemens Sinumerik 840 D Length mm 13170 Width mm 8605 Height mm 2000 Weight kg 16000 ...

NC Lathe KOVOSVIT MAS SPT 16N


Centre width: 500mm max., turning diameter: 200mm, tool changing system: 4 slots, control: Sinumerik 6T, length: 4000mm, width: 2000mm, height: 2000mm, including chip conveyor, filtration system FRANKE and control cabinet.

CNC Long Turning Machines POTISJE PD 1250x3000 SINUMERIK


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed sagittis gravida ipsum, sed pharetra tellus. Vivamus lobortis mauris enim. Integer vel turpis metus. Quisque justo dolor, luctus eget arcu ut, eleifend consectetur erat. Ut sit amet porttitor el ...

CNC Lathe BENZINGER TNL


X-travel: 270mm, z-travel: 340mm, rotational speed: 5000/min max., centre distance: 400mm, turning diameter: 250mm, turning length: 400mm, control: Siemens Sinumerik 810 T, length: 2000mm, width: 1400mm, height: 2200mm, weight: 2t.

CNC Lathe BOLEY BDN


X-travel: 180mm, z-travel: 400mm, rotational speed: 4000/min max., number of tool slots: 12, spindle passage: 42mm, chuck diameter: 140mm, control: Sinumerik 810, weight 2.5t.

Vertikal Turning Machines (Lathes) TOS SKS 12 CNC


SKS 12 CNC driven tools and control system Sinumerik 3T 4 jaw hydraulic clamping plate max. 1400 mm Max. 1400 mm max workpiece height 1900 mm max. workpiece diameter 1710 mm at maximum height 600 (balcony rod) clamping plate diameter 1250 mm max ...

Lathe EMAG USC2


Centre width: 1000mm, spindle bore: 8mm, turning diameter: 500mm, turning length: 1700mm, swing diameter: 700mm, chuck diameter: 400mm, tool mount: VFI 50, revolver slots: 12, control: Siemens Sinumerik 810, connected load: 45kW, voltage: 380V, weight: 8t ...

CNC Turning Machines Famot 400 CNC


Sinumerik 810 D turning dia 500 mm z axis 640 mm x axis 200 mm head 12 tools additionally C axis and Y axis

Surface Grinding Machines With Long Table, Horizon ABA 2000 x 500


CNC Sinumerik 310 table 2000 x 500 mm grinding height 700 mm

CNC Laser Cutting Machines TRUMPF TRUMATIC L4050 5KW


In running conditions. With liftmaster Working Area: 4000 x 2000 x 115 mm Laser Power: 5000 Watt Control: Siemens Sinumerik 840 D Working Hours: 60.000 Ray-on: 30.000 Max. Sheet Thickness: 20/25/12 mm Max. Speed: 200/300 m/min Accuracy: 0,1 mm

Lathe HORIZONTAL BAR INDEX ABC 60


year 1995 Control system: Siemens Sinumerik 840C / C200-4 Bar capacity: 60 mm Spindle speed : N ° of revolutions 5000 Motor power main spindle: 29/20 kW TOWER 1 (motorized): VDI 25 Number of stations: 8 Tool taper DIN 69880: 25 x 48 mm Race X: 9 ...

Invema DC13 65x1600


Radial drill Invema DC13 65x1600 CN Sinumerik 805 Technical data: Drilling distance max 1600 mm Solid drilling max 65 mm Full thread max 50 M Sliding sleeve 80 mm 260 mm spindle travel Morse taper of 5 Speed 25 – 2000 RPM Spindle motor power kW 5 ...

Heavy Lathes WALDRICH SIEGEN WSD2300/100NCX12000


Chuck Size: 2,250 mm Power: 150 kW Max RPM: 134 rpm Turning Dia: 2,500 mm Swing: 2,500 mm Machining Length: 12,000 mm Tailstock: Yes Weight: 221 tons Control: CNC (Siemens Sinumerik 840D) Siemens 840d CNC Control System 3 xSteady Rests Specif ...

Spiral Bevel Gear Cutting Machine Klingelnberg C40


Gear diameter: 400mm, spindle diameter: 58.2mm, Module range: 1.5-8.5mm, connected load: 100kVA, voltage: 3x400V, control: SINUMERIK 840C, length: 5450mm, width: 2500mm, height: 2450mm, weight: 16.5t.

CNC Lathe PITTLER NF 250


Turning diameter: 260mm, turning length: 2800mm, control voltage: 24V, rated current: 100A, control: Siemens Sinumerik System 8, length including chip conveyor: 5000mm, width: 2000mm, height: 2100mm, weight: 6t, condition: currently in operation.

Gear Hobbing Machines Gleason Pfauter P2400


Gleason Pfauter P 2400 CNC Gear Hobber (Brand New) Maker: Gleason Pfauter (Germany) Model: P2400 YOM: 2011, NEW - never installed, stored in original packing crate. Control system: Siemens Sinumerik 840D Nominal Workpiece Diameter: 2,400m ...

CNC Boring Mills TOS WHN 13.9


X-3500 MM Y-2000 MM Z-1250 MM W-800 MM tailstock CNC SINUMERIK 3M

Facing and Centering machine, CNC GACK DEM NC 3TT/WF 625


Facing and Centering machine GACK DEM NC 3TT/WF 625 -Make-Ludwig GACK GmbH, Muehlacker, Germany -Type- DEM NC 3TT/WF 625 Spezial -Year of manafacture- 1983 -Type of control- CNC Sinumerik 3TT -workpiece diameter-max.500 mm, min 120 mm; -workpiece l ...

Milling Centre Chiron FZ 22 L


Control: Siemens Sinumerik 810M, x-travel: 1600mm, y-travel: 520mm, z-travel: 425mm, rapid traverse x-, y- and z-travel: 20m/min, rotational speed: 20-8000/min, clamping surface: 2300x570mm, T-slots (DIN): 650, quantity: 3, slot width: 18mm, slot distance ...

CNC Horizontal Machining Center Hüller Hille BLUESTAR 5


X-travel: 700mm, y-travel: 630mm, z-travel: 700mm, dual pallet changer: 500x500mm, rotational speed: 10000/min, tool magazine for 40 tools: SK40, circular table: 360x1°, control: SIEMENS Sinumerik 840 D.

Gear Grinding Machines Gleason- PFAUTER P 400 G


Gleason- PFAUTER P 400 G Gear Profile Grinding Machine YOM 2013, Mach. No. 30 583 Installed, Never used! Start up and test from the producer only. CNC control: Siemens SINUMERIK 840 D sl Designed for gear grinding of external and internal spur and h ...

CO2 Laser Cutting Machine TRUMPF TRUMATIC HSL 4002 C


Operational area: 2500x4000mm, laser power: 2x3600Watt, control: Sinumerik 840D, metal sheet thickness: steel: 20mm max., stainless steel: 20mm max., aluminium: 10mm max., speed: 12000mm/min, accuracy: 0.1mm, length: 15800mm, width: 7280mm, height: 3090mm ...

CNC Machining Center Hüller Hille NB-H 70


X-travel: 630mm, y-travel: 500mm, z-travel: 550mm, clamping area: 500x400mm, spindle speed range I: 25-4000rpm, spindle speed range II: 60-6400rpm, control: Sinumerik System 8.

Laser Cutting Machines Trumpf TruLaser 3050


Type TruLaser 3050 Årgang 2008 Ref. nr. 6337 Manufacturer Trumpf Model TruLaser 3050 Serial nr. N0053A0060 Year of Manufacturing 2008 Working Hours H 23972 Control Siemens Sinumerik 840 D Length mm Width mm Height mm Weigh ...

Groove Milling Machine Bosch FSV 9


Clamping Area: 350x1000mm. Control: Siemens Sinumerik S5.

Machining Centre Scharmann Solon 3


x-axis: 1600mm, y-axis: 1000mm, z-axis: 1000mm, table dimension: 1000x1250mm, number of pallets: 2, tool places: 80, tool holder: SK50. Control: Siemens Sinumerik 840D.
Get the latest machine offers by email: order newsletter