We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,252 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
used
Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999
used
Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999
used
USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers
used
Overview This complete filling and packaging line for PET bottles is designed for an output of 18,000 bottles per hour and different bottle formats can be run. The line is still in production and will be vacant in spring 2024, as it will be replaced by a larger one. Individual machines Preform tipper | Tanner | KPT-2020 | 2004 Compressor | Atlas Copco | - | 2004 Blow molder | SIG Corpoplast | BLOMAX 12 | 2004 Capacity: 18,000 bph 12 cavities Min./ max. volume: 0.2l - 3.0l Bottle length min./ max.: 107mm/ 350mm Preform length min./ max.: 60mm/ 200mm Dimensions (LxWxH): 6.947mm x 4.419mm x 3.357mm Including Cooling unit, preform tipper, PET erector Filler | SIG Simonazzi (now SIDEL) | EUROSTAR 2000 | 2003 Capacity: 21,500 bph Number of filling valves: 100 Format: designed for 0.5l, others: 1.0l -1.5l Closure type: plastic 28mm Ozomix plant | Aeraque | Ozomix 300K | 2004 ...
used
Complete Bottling Line PET | 18.000 bph • Year: 2003 • Speed: 18.000 bph • Preform tipper KPT-2020 | 2004 • Compressor Atlas Copco | 2004 • Blow Moulding Machine SIG Corpoplast Blomax 12 | 2004 o 12 cavities o Including cooling unit o preform tipper • Filling Monoblock Simonazzi SIG Eurostar 2000 | 2003 o Rinser o 100 filling valves | ISOBARIC FILLING SYSTEM o Bottle formats: 0.5 LT | 1.0 LT | 1.5 LT o Capper | Plastic cap 28mm • Plant Ozomix Aeraque | 2004 • Nitrogen dosage Terboven ISTE-T2K • REDA | 2004 • Verlcorin dosage • Mixer SIG | 2004 • Dryer SIG ACI EP10 • Labeller SIG ROLLQUASAR 720 | 2004 o 18 heads • Shrink Wrapper SMI SK452 T | 2004 • Handler Twin Pack | 2004 • Palletizer SIG Kombi | 2004 o Interlayer pad system • Pallet Wrapper Robopac Genesis Hs | 2004 • Plant CIP SIG | 2004
used
Overview The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l) Formats: 500ml, 750ml, 1.000ml, 1.500ml PCO 1881 Operating voltage: 400V/ 50 Hz Control voltage: 24 VDC Scope of delivery Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008 Preform feeder | Transver AG | - | 2008 Silo Elevator Sorting Chute
used
Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained. Technical details Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm Weight: 15 t Operating hours: 44.736 Bottles Volume: 200 ml - 2000 ml Max. Diameter: 115 mm Max. Length: 350 mm Preforms Length: 60 - 200 mm Max. Support ring diameter: 35 mm Scope of delivery Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)
used
Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000
used
Type: MST, Y.O.M. 1989, strapping machine with 6 new replacement belt rollers, 0.9 kW.
used
Type: MST. Strapping machine with 6 new replacement strap coils, 0,9 kW.
used
2 Motor driven conveying systems (Vibration) - 1400 mm x 1000 mm each. Each unit is driven by 2 motors
Packing machine of the SIG type HBS With a Siemens S7 control If you have questions you can me any time call. Phone: 0049 1718367957 Mobile phone: 0049 1718367957
used
The machine has a Siemens S7 control system
used
SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,
used
A volume of depositors of the SIG type ZHG They can provide these depositors a SIG-GS or SIG-GRT We advise you gladly Phone: 0049 1718367957
Products For square, rectangular or round biscuits and baked goods suitable for roll separation Feed/System integration • For feeding pillow-pack and wrapping Machines • Presentation direct to portioner always with vibratory channels • Manual or automatic portioner infeed • Own drive Technical features • 4 to 12 channels
used
SIG F140 250 gr. 60 punches/min Capacity: 900 kg / h wrapping in aluminum foil / parchment paper Condition: Very good
used
Type: 9T S2/E2 SENSITIVE Model: A-720 Machine capacity: 135 bottles per minute
used
Origin: United States M. Nr: 71080
used
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
used
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
used
Aseptic capping machine -Capacity: 7000-12000 packs per hour -Pack size: 0,5L, 0,75L and 1L also angle mounting.
used
Signature RotoBraille Age: 2015 With high speed ejection cameras for bad boxes (where Braille letter was not embossed correctly) Very nice condition- Free of damages and ready to go. Machine has pre-makeready table There are 8 top and 8 bottom drums- 4 with four lines and 4 with five lines. Detection system IN-sight.
used
X-AXIS STROKE: MM 1,600 Y-AXIS STROKE: MM 810 Z-AXIS STROKE: MM 630 TABLE SIZE MM 1,750 x 770 ATTACK: ISO40 SPEED ROTATION REVOLUTIONS/MIN 15,000 REFRIGERATION THROUGH THE SPINDLE TOOL N ° 50 CONTROL: SELCA YEAR: 2008
used
Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...
used
used
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC 16i-MA Technical data Table length: 1400 mm Table width: 650 mm Longitudinal travel (X-axis): 1250 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 750 mm Table load max.: 1500 kg Pallets chanching device: number: 2 Length: 1400 mm Width: 650 mm Time of changing palets: 45 sec Transport weight: 1500 kg Tool changer: Number of tools: 40 Tool diameter: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 20 kg Time of tool changing: 5 / 11 sec Spindle nose:: n° 50 Distance from vertical spindle to table: 100/850 mm Spindle speeds: stepless up to: 4000 rpm Vertical spindle speeds: stepless from: 20 rpm up to: 4000 rpm Torque max.: 662 Nm Rapid traverse:: 15 m/min Voltag ...
used
Packaging plant Technical data • Conveyor belts: 4 • Conveyor belts Length (mm): 2570 • Conveyor belts width (mm): 900 • Ewnopack WSU 2200 cutting machine: built in 1995 • Cutting machine cutting length (mm): 1400 • Strapping device Signode HB 4300: built in 2002 • Strap Signode HB 4300 for: 9 / 10.5 mm plastic tape • Pass-through size strapping device max. (mm): width = 800; Height = 780 • Components all: fully automatic chained
used
Aseptic line SIG Combibloc model: 209-32 capacity of 9,000 packages per hour capacity: 500ml, 700ml, 750ml, 1000 ml Cap: CombiSwift carton type: SIG Combifit
used
used
For sale: 1. Filler Manufacturer :SIG Combibloc Model : CFA 310 -32 Year : 2000 Output : 10.000 pph Format : Combibloc Slimline Volume : 1000ml 2. Cap applicator Manufacturer : Combibloc Model : SIG allCap ACB Cap model: Combiswift year: 2003
used
aschinella details Warehouse number 1105-03380 Machine Type Machining Center - Vertical Sigma brand Type MISSION 2 Year of construction 2002 Control type CNC Control FANUC 18 M Storage location FRANCE Country of origin Italy Delivery time by arrangement Freight base from location Technical details x-path 750 mm y-way 400 mm z-displacement 450 mm Table clamping surface 900 X 400 mm table load 600 kg Tool holder SK-40 ( DIN 69871-A) Speed range 6000 rpm Spindle pitch 15 kW torque 191 Nm Spindle cooling with cooling agregat Tool magazine with TELLER MAGAZINE Places in the tool magazine 16 pieces( RANDOM) Suit bolts DIN 69872-A Control FANUC 18 M Information Accessories: NC STEUREUNG FANUC 18 M
used
core drilling diameter max.: 50 mm bore depth: 2000 mm swing diameter: mm drilling capacity diameter max.: 110 mm total power requirement: 30 kW weight of the machine ca.: 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features Machine consists of the following elements: ...
used
Pick and place Servo feeder Herzog+Heymann/Sigma; good condition; maintained and tested by Sigma Customer Service; Format max.200x150mm, min.50x50mm; Material thickness 0.1-6mm; High-speed version up to 18,000/h Pick and place servo feeder Herzog+Heymann/Sigma; good condition; checked by the support of Sigma; size max.200x150mm, min.50x50mm; thikness 0.1-6mm; high speed version up to 18.000/h.
used
Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures
used
Vertical machining center make SIGMA type EK 150 PYear 1989 with table pallet changerCross table travel X: 1500 mmTable longitudinal travel Y: 800 mmSpindle perpendicular Z: 750 mmTable surface: 1900 x 750 mmMax. Table load: 3.5 tSpindle mount: ISA 50Spindle speeds: 20 - 4000 rpm.Max. Drilling capacity: 60 mmThread cutting capacity: M 48Milling capacity: 450 cm³ / min.Working feed: 0 - 10000 mm / min.Rapid feed: 15000 mm / min.Distance spindle axis / guides: 890 mmDistance spindle / table min./max.:150 / 900 mmDrive power: 26 kWWeight approx: 16 tOutside dimensions approx: 3710 x 4100 x 3520 mmWith- Tool changer with 40 tool placesxa0xa0xa0Max. Tool diameter 120/200 mmxa0xa0xa0Max. Tool length 400 mmxa0xa0xa0Max. Weight of each tool 20 kgxa0xa0xa0Tool change time 5,0 sec.xa0xa0xa0Span to Span time 11 sec.- 2 workpiece changing tablesxa0xa0xa0Max. Load of pallet 2.5 txa0xa0xa0Pallet chan ...
used
SIGMA MISSION 2 vertical machining center with HEIDENAIN 426 control. Fully functional machine, including all its mandrine, DASSI refrigerator. X axis stroke 850 Y 480 Z 580
used
Sigma 6-16HS Heated Centrifuge in perfect working order and conservation. Accessories included: rotor, 500, 50 and 15mL adapters. 500mL jars. Table not included.
used
Vertical Machining Centre SIGMA LEADER 5 - 15.000 rpm - travel1250x810x630 mm, CNC FANUC 18i-M, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1400x650 mm, Longitudinal travel x axis: 1250 mm, Cross travel y axis: 600mm, Vertical travel z axis: 685 mm, Working feed X-Y axes: 0 - 24.000 mm/1, Working feed Z axis: 0 - 15.000 mm/1, Spindle taper type: 40 DIN-69871, Automatic tools change nr.: 40, Spindle speed: 0- 12.000 rpm, Spindle motor power: 25 Kw, Cnc: HEIDEHNAIN TNC426, Approx net weight: 8.000 Kg, Accessories: through-spindle coolant, chip conveyor
used
Sigmatek CDI 163 C-DIAS Digital Bus Module Input Module At times, devices were in use under favorable conditions in a test station, hardly used, mostly for testing the software when setting up new systems. Invoice with VAT We may be able to assist you if you have any uncertainties about the software (e.g. if the software monitors the serial number). Feel free to call us.
new
Sigmatek DDI166 DIAS Digital Bus Module Module Module Carrier Original packaging, unused, as good as new. Hardware versions 1.0 and 1.3 available. Price per piece. Invoice with VAT We may be able to assist you if you have any uncertainties about the software (e.g. if the software monitors the serial number). Feel free to call us.
used
Sigmatek CAI024 C-DIAS digital bus module - analog input module. The device was temporarily used under favorable conditions in a test station, hardly used, mostly for testing the software when setting up new systems. Price per piece. Invoice with VAT We may be able to assist you if you have any uncertainties about the software (e.g. if the software monitors the serial number). Feel free to call us.