shredder granulator used for sale

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

MEWA UG 1007 MS Power 160 kW Condition: used in need of repair Rotor blades: 25 pieces Stator knives: 10 pieces incl. hopper with pusher Switchboard Discharge chute Hydraulic Screen lifter Very few hours of operation. The machine has been unused for several years. Total weight approx. 15 t Delivery time : immediately

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Herbold granulator Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1987 and is in great condition. Brand: Colortronic Model: M400L Serial No.: 7491029 feed opening: 400 x 160 mm Number of rotor knives: 8 blades Year of construction: 1987

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1991 and is in great condition. Brand: Colortronic Model: M400L Serial No: 74910029 feed opening: 400 x 160 mm Number of rotor knives: 8 blades Year of construction: 1991

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

RAPID 4535 Granulator 3 fly 2 dead blades 2 x Screens 1 x Frame Safety system Spare set of blades

100 litre, Stock number: R278, Granulator/mixer, stainless steel,, Blendex 4., Open top, standing on console, tiltable., Ø 600 mm., Litre: 100, Material: Stainless steel AISI 304

Stock number: R397, Lab. pelletezer, stainless steel,, Axon type MG-lab., Excl. steering., Material: Stainless steel AISI 304

Stock number: R517, Cubic cutter, stainless steel,, Treif type TA 108/4., E.g. for cutting up potatoes., 110 x 110 x 450 mm chamber., Various tools., Material: Stainless steel AISI 304

Stock number: R060, Square cutter, Treif., Variable square length., 2-chamber type., 1 hydraulic piston.

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

Granulator Manufacturer: Retsch Type SM 100

HERBOLD KG 45/50, granulator, rotor width 500 mm, n.3 rotating knives x 500 mm., n.2 still knives, 37 kw drive, NEW electric panel, Machine offered totally reconditioned, (photos before overhauling - see how we recondition [HERE](.germanplast/pages/photo-gallery)), installed power - used power in work: about 60-65% : 37, conditions: reconditioned, working width: 500 mm.

We are offering for sale a 3 tn per hour copper cable granulation line consisting of: - MEWA UG 1600 granulator, - Two pieces of turbo mill 90 kw each, - Dry separation table MTB T1000XT1500, - 1 linear screen, - 2 pieces of wet separation table, - Fans, cyclone, piping and filter. This line can process unsorted copper cables with steel attachments and WEEE scrap. Production capacity is 3,000 kg per hour for copper cables. Find more here - / Contact us at -

Granulator Manufacturer: Retsch Type SM 1 The Retsch type SM 100 granulator is a versatile laboratory device designed for the efficient shredding of various materials. This type of grinder is particularly suitable for the preparation of samples in the chemical and pharmaceutical industries, materials research, and the food industry.

Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...

Used granulator made by Matador. The device is used for grinding materials. It can be useful in various industrial applications. Capacity 3t/h. Conditioner included. 2 units available: 250 and 315 kW.

TRIA GRANULATOR XT 9042, (machine offered totally reconditioned - photos taken before reconditioning), 900 mm wide rotor, Infeed dimensions : 1000 x 550 mm., Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, now mounting a 12 mm.screen, prepared for extraction through blower, control panel, constructed in 2016, information given by previous owner, the machine is offered totally reconditioned with new knives and general reconditioning, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

A Dreher plastic granulator is available. Rotor diameter: 270mm, rotor width/working width: 820mm, feed opening X/Y: 820mm/260mm, motor power: 18.5kW, throughput capacity: approx. 300kg/h, weight: approx. 1000kg. Including equipment cladding. Documentation available. An on-site inspection is possible.

Fully refurbished cable granulator line available for immediate sale. This complete recycling system includes a pre-crusher (shredder), magnetic separator, granulator with new knife sets, air extraction unit, and a new control cabinet. The line produces approximately 150 kg of granules per hour with very good separation results. Operated for approximately 20 tonnes of cable only. The machine was built between 2006 and 2021, depending on the machine part. Machine 1 - Granulator - Manufacturer: Engin Plast (EP) - Type: BA 40.30 - Power: 11 kW - Voltage: 400V / 50 Hz - Year of Manufacture : 2006 Machine 2 - Pre-Crusher / Shredder - Manufacturer: Wagner - Type: WS 15 - Driving Power: 15 kW - Weight: approx. 1,400 kg - Voltage: 400V / 32A / 50 Hz - Year of Manufacture : 2007 Machine 3 - Magnetic Separator - Manufacturer: Magnetica Torri - Type: NPM410-050-040 - Weight: 120 kg - Year:  ...

A compact Getecha edge trim granulator is available. Inlet opening X/Y: 254mm/305mm, drive power: 3.7kW. An on-site inspection is possible.

Granulator with forced feeding by auger, screw power: 0.75 Kw; material extraction by gravity with collection drawer; feeding mouth: 550 x 540mm; granulation chamber: 160 x 100mm; motor power: 1.5 Kw; rotating blades: 2; fixed blades: 2; grid holes: 5mm. Serial: 17 Estimated weight: 230 kg Approximate dimensions: 1200x800xh1400 mm Auction-ID: A7-46655-31

Granulator with forced feeding by auger; material extraction by blower, blowing power: 0.75 Kw; feeding mouth: 370 x 300mm; granulation chamber: 250 x 270mm; motor power: 14 Kw; rotating blades: 3; fixed blades: 2; grid holes: 6mm. Serial: 1018A290291 Estimated weight: 450 kg Approximate dimensions: 2300x1200xh1000 mm Auction-ID: A7-46655-32

This complete cable recycling plant has a capacity of 1000 kg/h and is designed for the granulation and separation of electric cables, recovering both copper and plastic materials. Complete Line Components - Pre-shredder: Tecnoecology TG 1250, 55 kW - Blade mill 600 mm: Tecnoecology, 37 kW - Zig-zag separation plant: Tecnoecology - Cell mill: Tecnoecology T25/45, 55 kW - Separation table: Tecnoecology TV 500 - Vibratory screen 600 mm for separation of ground plastic and fine copper - Separation table: Tecnoecology 300 for fine copper recovery - Dust filter: 72-sleeve type - Pneumatic transport fans - General electrical control panel Find more here - / Contact us at -

Feed port: 210 x 135mm; granulation chamber: 150 x 90mm; rotating blades: 2; grid holes: 5.5mm. Serial: 2539 Estimated weight: 200 kg Approximate dimensions: 1200x800xh1200 mm Auction-ID: A7-46655-33

Type: Plastic Granulator Brand: Shini Model: SG-2348E Application: Size reduction / grinding of plastic parts, sprues and rejects Technical Data: - Voltage: 3~ 380 V - Frequency: 50/60 Hz - Installed power: 11000 W - Year: 2007 Equipment: - Large feed hopper with safety curtain - Emergency stop - Start / Stop controls - Integrated motor - Discharge opening Condition: Used Auction-ID: A7-45993-66

Type: Granulator / Shredder Brand: Blackfriars Model: 320/150 Machine No.: 320 150 5 Job No.: 14208 Technical data: Max. speed: 750 rpm Execution: - Industrial granulator for plastics or similar materials - Feed hopper with safety curtain - Internal cutting rotor system - Integrated electrical control cabinet - Emergency stop button - Start / Stop / Reset controls Features: - Heavy-duty steel construction - Direction of rotation marking - Safety interlock on hopper access - Compact floor-standing unit Condition: Used Auction-ID: A7-45993-89

Type: Plastic Granulator Brand: Shini Model: SG-2524 Application: Size reduction / grinding of plastic parts, sprues and rejects Technical Data: - Voltage: 3~ 380 V - Frequency: 50/60 Hz - Installed power: 5500 W - Year: 2007 Equipment: - Sound-insulated hopper with safety flap - Integrated control panel with ammeter - Emergency stop - Main switch - Discharge outlet - Extraction connection Condition: Used Auction-ID: A7-45993-65

Type: Granulator / Plastic Grinder Manufacturer: Blackfriars Ltd. Model: 320 / 150 Machine No.: 320 150 4 Job No.: 14126 (partially legible) Max. Speed: approx. 1750 rpm Application: Size reduction of plastic parts, sprues and scrap material Configuration: - Feed hopper with safety grid - Internal cutting chamber with multiple blades - Discharge outlet with collection container - Electrical control box with emergency stop - Start / Stop push buttons Safety Features: - Emergency stop button - Safety switch on access door Condition: Used Auction-ID: A7-45993-86

Type: Granulator / Plastic Grinder Brand: Blackfriars Model: 320-150 Execution: - Industrial granulator for plastics and similar materials - Feed hopper with sound-damping curtain - Cutting chamber with rotor knives - Discharge chute with collection container - Integrated control panel with start/stop and emergency stop Technical data: - Model: 320-150 - Max. rotor speed: approx. 750 rpm Equipment: - Feed hopper - Cutting unit - Control cabinet - Emergency stop - Discharge with collection tray Condition: Used Auction-ID: A7-45993-93

Make: Wanner Technik GmbH Type: Granulator / Plastic Crusher Model: C13.20sv Serial number: L 028 Year: 2007 Power: 2.2 kW Voltage: 400 V / 50 Hz Machine type: - Industrial granulator for plastic materials - Hopper-fed cutting mill Features: - Large feed hopper - Integrated cutting chamber - Discharge outlet for granulated material - Electric motor drive - Emergency stop button - Mobile base with wheels Control: - Main switch - Emergency stop - Industrial connector interface Application: - Size reduction of plastic waste - Recycling processes in industrial environments Condition: Used Auction-ID: A7-45993-33

Type: Granulator / Plastic Grinder Brand: Shini Model: SG-1624 Execution: - Compact plastic granulator - Feed hopper with safety flap - Integrated cutting chamber - Cyclone separator with extraction pipe - Integrated control panel with ammeter Technical data: - Model: SG-1624 - Power: 3.5 kW - Voltage: 3~ 380 V - Frequency: 50/60 Hz Equipment: - Feed hopper - Cutting unit - Cyclone separator - Control panel with emergency stop - Main switch Condition: Used Auction-ID: A7-45993-94

Make: JOHN BROWN Type: Industrial Granulator / Plastic Grinder Manufacturer: John Brown Engineering Ltd. Machine type: - Plastic granulator / shredder - Hopper-fed grinding unit Configuration: - Top loading hopper - Internal rotating knives (blade system) - Discharge outlet for processed material - Mobile base with caster wheels Control: - Main power switch (rotary isolator) - Start/Stop push buttons - Emergency stop Safety: - Safety labels present (rotating knives warning) - Enclosed cutting chamber Application: - Size reduction of plastic materials, scrap, or similar industrial waste Condition: Used Auction-ID: A7-45993-30

Type: Granulator / Plastic Grinder Brand: Shini Model: SG-1624 Execution: - Compact plastic granulator - Feed hopper with safety flap - Integrated cutting chamber - Cyclone separator with discharge - Integrated control panel Technical data: - Model: SG-1624 - Power: 3.5 kW - Voltage: 3~ 380 V - Frequency: 50/60 Hz Equipment: - Feed hopper - Cutting unit - Cyclone separator - Control panel with emergency stop - Main switch Condition: Used Auction-ID: A7-45993-95

Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66