shears used for sale

McIntyre 150 Shear Designed as a low-cost answer to metal cleaning, an ordinary 13amp socket and suitable bench are all you need to put the 150 shear through its paces Versatile The McIntyre 150 Shear is ideal for all lighter metal shearing, but is powerful enough to tackle gun metal valves, bath taps, cable and other non-ferrous cleaning operations. The McIntyre 150 Shear is small enough to be moved easily around the yard and will be a versatile addition to any size of yard. Our company can provide it with short delivery time.

McIntyre 900 Diesel Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses in particular the handling of larger pieces of non ferrous scrap. The 900 can be operated via a foot pedal for more accurate control, or can be set to work continuously to enhance processing speed. The machine is built to last using top quality components and is equipped with a heavy duty guard to improve operator safety.

McIntyre 320 Shear The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type Powerful and high quality One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

ERMAK HGS 2600 X 6 guillotine shears built in 2006 in Turkey are designed for cutting sheet metal with a maximum thickness of 6 mm. The machine performs this process using precise cutting knives with an option to adjust the gap between the blades. The simple design, with an efficient drive system, further ensures trouble-free operation throughout its lifetime, while maintaining the highest cutting quality. The ERMAKSAN HGS 2606 guillotine shears weighs 5000 kg. Technical specifications of the ERMAK HGS 2600 X 6 guillotine shears - maximum workpiece thickness: 6 mm - maximum workpiece length: 2600 mm - number of strokes: 20/min - oil tank capacity: 150 l - motor power: 11 kW - power supply: 380 V - dimensions (L x W x H): 3395 x 1880 x 1550 mm - weight of machine: 5000 kg

McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations.

McIntyre 500 GT Shear The 500 GT is designed for those needing just a bit more blade length without an equivalent increase in price Versatile The 500 GT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non-ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to double up as a catalytic converter shear.

McIntyre 900 Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses, in particular the handling of larger pieces of non-ferrous scrap. The 900 can be fitted with solenoid control allowing it to be coupled to infeed or outfeed conveyors. Other optional equipment for the 900 shears includes oil-immersed tank heaters, forced air cooling and infeed table to handle oversized material

McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).

McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).

Ladies and gentlemen, we offer: Alligator scissors shepherds: Type: Proto III Drive: 18.5 KW Number of cuts per minute: 22 Measuring opening Knife tip: 310 mm Knife length: 810 mm Weight: 6.8 tons Machine has been overhauled. Control cabinet renewed

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6000 mm, 4 mm

With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640

Manufacturer: Mc Intyre Knife length: 508 mm Opening of measurement: 250 mm Cutting capacity: 120 tons Round iron ST 37: 67 mm diameter Number of strokes at 1/4 opening: 100 per minute Number of strokes at full opening: 20 per minute Dimensions ( L x W x H ): 1650 x 915 x 1490 mm Weight: 1143 kg Drive: 7.5 kw / 400 V Operation: foot pedal Alligator scissors JMC 500 HD The JMC 500 HD has a hydraulic holder. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket.

NARGESA C3006 hydraulic guillotine shears were built in 2015 in Spain by PRADA NARGESA, S.L. The machine, which is designed for precision cutting of sheet metal with a maximum thickness of 6 mm, has quality knives with four cutting edges with increased service life. The beam is driven by a powerful hydraulic unit, which, like the electronic system, is made up of components from renowned brands. Easy operation of the machine, on the other hand, is ensured by a digital LCD display with an installed NC controller. The NARGESA guillotine shears weigh 8000 kg. Technical specifications of the NARGESA C3006 guillotine shears - maximum workpiece thickness (black steel 450 N/mm2): 6 mm - maximum workpiece thickness (stainless steel 700 N/mm2): 4 mm - maximum cutting length: 3030 mm - number of strokes: 12/min - cutting angle: 1,75° - maximum back stop distance: 700 mm - back stop posit ...

Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal

ERMAK GMR 2600 X 4 mechanical guillotine shears were built in 2007 in Turkey by ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. The machining process is performed by high alloy steel cutting knives with adjustable gap between blades. Automatic hold-down system, in turn, prevent the sheet metal from sliding during machining, ensuring uninterrupted production of repeatable parts. Moreover, the operator’s daily work is facilitated by the convenient foot switch control and the intuitive NC control, which allows the creation of machining programmes in just a few steps. The GMR 2600 X 4 guillotine shears weighs 3750 kg. Technical specifications of the ERMAK GMR 2600 X 4 guillotine shears - NC control - maximum workpiece length: 2600 mm - maximum workpiec ...

Alligator scissors TR250: • Four-sided knives usable • Opening width is continuously controlled via foot pedal Technical data: Total dimensions: 1100 x 700 x 1200 mm Total weight: approx. 350 kg Knife length: 250 mm Max. knife opening: 150 mm Cutting force: 350 kN Cutting power: Round iron 22 mm (ST 37) Main drive: 3 phases: 4 kW (5.5 hp) Cutting strokes p/min: up to 17 / min

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

Used JMC 407 Kat Alligator Scissors Alligator scissors JMC 407Cat The catalyst version JMC 407 has an additional "V-holder" in the cutting area for adjustment when cutting or opening the catalysts. In stock at the end of March 2021 Knife length: 407 mm Measuring opening: 250 mm Cutting capacity: 90 tons Round iron ST 37: 57 mm diameter Number of strokes at 1/4 opening: 63 / min Number of strokes at full opening: 11 / min Dimensions (L x W x H): 1550 x 880 x 1120 mm Weight: 880 kg Drive: 7.5 kw / 380 V Operation: Foot pedal

RICO HGR 310 hydraulic guillotine shears were built in 2013 in Portugal by Rico Tomás Castro Silva, LDA. The machine, designed for machining of sheet metal with a maximum length of 3050 mm, offers high reliability, efficiency and precision. The machining process is performed by means of high-quality cutting knives with the ability to adjust the cutting angle according to the thickness of the material. Constant press force and balance during cutting are ensured in turn by synchronised movement of the cylinders with the flow of hydraulic fluid from one cylinder to another. All this is complemented by a fully welded design, which has undergone a number of technological operations to minimise deformation and ensure maximum durability. The HGR 310 guillotine shears weighs 8700 kg. Technical specifications of the RICO HGR 310 guillotine shears - NC control - maximum workpiece thickness ( ...

Key data: 1550 mm, 3 mm

Machine Type: Guillotine Shears Manufacturer: KRAMER Type: TM1a Year of Make: 1987 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-KRA-1025-1 DESCRIPTION We offer you a used guillotine shears from the manufacturer Kramer. Expected to be available from 10/07/2025 Cutting width max. 1550mm Cutting capacity max. 3.25mm Back gauge 550mm Weight 2065kg Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC  ...

QC11K 18×6000 hydraulic guillotine shears were built in 2018. This highly efficient machine is designed for precision cutting of sheet metal made from e.g. steel, non-ferrous metals, as well as selected plastics. Workpieces with a maximum thickness of 18 mm are machined by means of high-quality cutting knives with four cutting edges. All process parameters, on the other hand, are programmed on the intelligent DELEM CNC control with an intuitive interface and many useful functions. The QC11K 18×6000 guillotine shears weighs 40000 kg. Technical specifications of the QC11K 18×6000 guillotine shears - maximum cutting length: 6000 mm - maximum sheet metal thickness (Rm=420 N/mm2): 18 mm - maximum sheet metal thickness (Rm=700 N/mm2): 12 mm - work table height: 900 mm - back stop stroke: 1000 mm - adjustable gap between blades and cutting angle - motor power: 21 kW - power supply ...

BAYKAL RGS 3150x3 electromechanical guillotine shears were built in 2007 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, distinguished by its high precision, is used for cutting of sheet metal with a maximum thickness of 3 mm. The machining process is performed by means of quality cutting knives with an adjustable gap between blades. The all-steel design, combined with a powerful electromechanical system, guarantees the highest cutting performance during even the most intensive challenges. The workspace is additionally protected by high-end light curtains made by FIESSLER ELEKTRONIK. All this makes the offered BAYKAL RGS guillotine shears an excellent choice for any industrial plant. Technical specifications of the BAYKAL RGS 3150x3 guillotine shears - maximum sheet metal thickness (Rm

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - fo ...

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...

MVD B06-3100 hydraulic guillotine shears were built in 2014 in Turkey by MVD Inan Machine Tool Industry Co. The machine is used for precision cutting of sheet metal with a maximum thickness of 6 mm. The machining process is performed by means of high-quality cutting knives, set at an angle of 1.5°. Positioning of the material is facilitated by a work table with integrated balls, on which the workpiece goes directly under the cutting line. All this is complemented by a robust design with a reliable 10 kW main motor. The MVD B 06-3100 guillotine shears weigh approximately 6000 kg. Technical specifications of the MVD B06-3100 guillotine shears - maximum sheet metal length: 3100 mm - maximum sheet metal thickness: 6 mm - number of strokes (automatic mode): 30/min - number of strokes (manual mode): 18/min - cutting angle: 1,5° - minimum distance of light curtain from knife: 2030 mm ...

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

Crushers

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

Key data: 3100 mm, 3 mm

- CNC control and electric 3x 400V, 50/60 Hz - CNC backgauge 5 – 750 mm - Machine frame with knife bar - Hold-down device with plastic coating - Sheet metal hold-up system - Cutting sorting system to the front and rear - Foot lever for adjusting the cutting material diverter - Built-in special knives (suitable for stainless steel) - Cutting gap quick adjustment - Cut line lighting with LED - Standard table trays - Front clippings collector - Safety device - (Protective fence right and left, light barrier) Working length: 3100 mm Sheet thickness steel: 3.00 mm Color: white / grey / yellow Dimensions: 3920 x 2370 mm with hold-down device Throat: 5-750 mm Speed: 26 strokes/min with angle stop Cutting angle of/up to :1000 mm Cutting angle: 1.1 degrees Min. back gauge: 5 mm Max. back gauge: 750 mm