scrap shredder used for sale

Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.

Hello, I will sell a powerful chipper of the German brand Willibald SR 5000 The engine of the reputable company MAN - 460 hp. These engines are distinguished by cheaper operation compared to concretions Year 1998 The chipper is in almost perfect condition for its age. The chipper is very well maintained in technical terms, I add a lot of expensive parts to the machine as well as all the documentation to facilitate the service of the chipper. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. Very easy access to the engine and other components thanks to the lifted hatch. The same applies to the operation, which is highly intuitive. A chipper for a very diverse demand: - Various types of wood waste - Carps, Carps - Zrzyny - Pallets - blocks, waste - hay, straw (after changing knives) - and many others Efficiency  ...

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition

Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph

Three-shaft shredder / pipe shredder - designed for the crushing of thick-walled pipes Manufacturer: NEUE HERBOLD New machine Drives: 2 x 30 kw - 1 x 37 kW

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

Output Capacity: 500 kg/h // Rotor Diameter: 560 mm

Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !

ORDER NO. 7177 TECHNICAL DATA - inlet width 400mm - inlet height 160mm - shaft width 400mm - shaft diameter 450mm - knife length 410mm - number of knives 2 pcs - Pulling shaft from above, toothed - Pulling shaft at the bottom, toothed - conveyor belt - length of the infeed belt 3980mm - width of the infeed belt 320mm - motor about 0.75kW - autorewers - main motor 22kW - feed motor 2×1.5kW - machine dimensions length/width/height 2200x1000x1370mm - feeder dimensions length/width/height 4050x640x950mm - weight of the machine and feeder about 2000kg ADVANTAGES – with a conveyor belt – autorewers – used chipper, very good condition Net price: 65 900 PLN Ex Tax: €14,977 depending on price, €4.40 (Prices may vary in case of larger fluctuations)

Granulator Load area: 140x140 mm Overall size: 950x500x1300 mm Power: 2,5 kW Weight: 200 kg Technical data: • Designed for beside the press operation (injection and blow moulding) • 3 knives open rotor • Reversible hopper • Slow rotor speed (250 RPM) • Lateral end discs which turn with the rotor • Standard screen in stainless steel • Quick opening and easy cleaning Processes: • Injection • Blow moulding • Extrusion Designed for: • Small wastes from purgings and castings • Tubes and profiles with small diameter • Trimmings

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Two-shaft shredder Drive 37.50 kW

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

CATALOG NO. 7145 TECHNICAL DATA - loading hopper inlet 800x600mm - outlet for chipped wood, diameter 125 mm - rotor working width 580mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 40x40mm - 20x15mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1820x1220x1650mm - weight 1232kg ADVANTAGES – German production – original DTR + CE documentation – V-type rotor – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 49900 PLN Net price: 11089 EUR depending on the price 4.50 EUR Net price: 13132 USD depending on the price of 3.80 USD (Prices may vary with higher flu ...

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

CATALOG NO. 7105 TECHNICAL DATA - loading hopper inlet 800x1000mm - rotor working width 800mm - main engine 18.5kW - pump motor approximately 1.1kW - number of knives 19 pcs - knife dimensions 30x30mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 180 mm - dimensions length/width/height 2090x1360x1630mm - weight 1250kg ADVANTAGES – autoreverse – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 62900 PLN Net price: 13978 EUR depending on the price 4.50 EUR Net price: 16553 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Pla ...

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

CATALOG NO. 7194 TECHNICAL DATA - inlet width 490mm - inlet height 150mm - shaft width 510mm - shaft diameter 400mm - knife length 520mm - number of knives 2 pcs - no sieve - toothed shaft pulling from the bottom - lower shaft motor 2.2kW - toothed shaft pulling from above - upper shaft motor 2.2kW - main engine 45kW - dimensions length/width/height 2200x1100x1300mm - weight approximately 1500 kg Machine used for inspection. No electrical box. The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Plane ...

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...

CATALOG NO. 7239 TECHNICAL DATA - shaft width 350mm - shaft diameter 260mm - inlet width 350mm - inlet height 120mm - number of knives 11 pcs - autoreverse - sieve dimensions 18x12mm - toothed shaft pulling from the bottom 0.75kW - toothed shaft pulling from above 0.75kW - with vibrorine - vibrochute length 3280mm - vibrochute width 335mm - vibrochute motor 0.75kW - main engine 22kW - feeder dimensions length/width/height 3280x600x510mm - machine dimensions length/width/height 1600x950x850mm - weight 1150 kg – German production - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 36900 PLN Net price: 8200 EUR depending on the price 4.50 EUR Net price: 9711 USD depending on the price ...

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

MOCO AZ11 TWIN-SHAFT SHREDDER Manufacturer: MOCO Type: AZ11 Shaft length: 400 mm Dimensions: 2320 x 1000 x 1950 mm Weight: 1300 kg Installed power of main engine: 15 kW Shredding knives: 2 X 12 ROTATING BLADE (+ CLEANING BLADES) THE SYSTEM MOCO AZ 11, shredder with slow and low noise running hexagon working shafts. Low vibration and minimal maintenance, compact design, robust welded construction, low power consumption, individually replaceable cutting discs. THE ELECTRIC The control of the AC geared motor is equipped with an automatic overload-dependent reverse control. The machine can be inspected in our warehouse in Székesfehérvár-8000 Hungary. For further information please contact us.

Edge strip shredder for edge trimming plastic films.

32 solid single flails

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

With magnet

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

Headquarters. Edge stiffener extraction

Ready for operation with 2 sets of new impact strips

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/