scrap shredder used for sale

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

Vacuum homogenesia system Made Haagen & Rinau Type Unimix RU IV 200 Useful content 200lt Stirrer m. scraper 1500/300 UPM 3.7/4,4 KW Homogenizer 1500/300 UPM 2.0/2.4 KW Heating by steam double sheath, max 6bar

Riding track planner, riding area planner, railway planner / Tennenplatz care equipment, working width approx. 1.80 m, consisting of three-point mounting frame with 2 rows of adjustable double spring tines, height-adjustable equalizing shield and screwed wear rail (steel 10x80 mm) and adjustable lattice roller (diameter approx. 400 mm) with cushioned scraper.

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

Hydraulic fish block shredder for frozen fish blocks with cross section 350x100 mm. Design: completely in stainless steel Operating pressure: 140 bar Speed: 50 rpm Oil consumption: 40 l/min. Dimensions: 1002 x 417 x 1148 mm Weight: 150 kg

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; Plastic edges: 0.4 - 3 mm; Workpiece thickness: 10 - 40 mm; Workpiece length min.: 90 mm; Workpiece width min.: 120 mm; Glue unit: granules / glue container quick change kit; Chopping knife: yes; Flush cross-cut unit: yes; Flush radius milling unit: yes; Radius Scraper Aggregate: yes; Surface scraper unit: yes; Power consumption: 8 kW; Machine Length: Machine Width: Machine height: Weight: Prima 5.2 r. â€" Partnership Edition Aggregates: Joining milling unit incl. AIGNER Diamant jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd joining cutter head. Cross-cut saw unit 1 motor, 2 saw blades radius milling unit, with Easy Set adjustment system Radius puller blade unit can be inserted and removed, incl. extraction device with chip c ...

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; Plastic edges: 0.4 - 3 mm; Workpiece thickness: 8 - 50 mm; Workpiece length min.: 130 mm; Workpiece width min.: 80 mm; Glue unit: granules / glue container quick change kit; Chopping knife: yes; Flush cross-cut unit: yes; Corner copying unit: yes; Flush radius milling unit: yes; Radius Scraper Aggregate: yes; Surface scraper unit: yes; Buffing unit: yes; Power consumption: 9 kW; Machine Length: Machine Width: Machine height: Weight: Prima 7.3 r.a. PLUS â€" Partnership Edition Aggregates: Joining milling unit incl. AIGNER Diamant jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd joining cutter head. Cross-cut saw unit with suction device incl. pneumatically swivelling saw blades, adjustable and programmable from the control pa ...

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821189 Benefits: + TOP value for money + robust, mobile socket roll-out machine + Operation with lever sand sand sands and pedals possible + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore even suitable for marzipan and roll fondant + integrated electric motor + large digital display of the roller setting, instead of a mm scale on the lever + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Dough collection sheets made of stainless steel, on both sides of the table, pull-out + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 650 mm - Table length: 1,320 mm each = 2,640 mm - Roller adjustment: from 0.5 mm  ...

New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days

New machine Stainless steel model 12-month warranty Benefits: + Machine completely in stainless steel + with automatic reel + Dough tape is shaved up without significant tension + with automatic flour spreader + with automatic roller adjustment + with integrated electric motor + high quality synthetic tapes, easy to clean + easy to drive, with steering wheels and locking feet for stable grip + Operation with touch panel + Computer control (100 programs) and manual operation via push-buttons possible + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Hand reel supports left and right + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Piece of do ...

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Spiral Kneader / Mixer Model: SP 340 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 10 - 220 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 340 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Dimensions: 1100 x 2100 x 1500/2300mm, WxDxH NEW Machine With 12 months warranty

This is a granulate dishwasher from the manufacturer Wexiödisk, type WD-100GR from the year of construction 2016. Wexiödisk granulate pot dishwashers clean all stainless steel kitchen utensils with water added to plastic grains. Even burnt-in grease can be removed quickly and easily. The dishes do not need to be soaked or scrubbed; only loose food residues are scraped off to avoid unnecessary contamination of the rinsing water. Thanks to the unique, double-door push-through system, the WD100GR differs from all other pot washers on the market; The dirt and clean sides are completely separated from each other. The scope of delivery includes the inlet table, the cassette trolley and two cassettes. The inlet table is equipped with a water faucet and a hose holder, so that a hand shower can be installed quickly and easily for pre-rinsing. The dishwasher has undergone a major predictive insp ...

Spiral Kneader / Mixer Model: SP 250 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 10 - 160 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 250 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 10.6 kW, 32A 32A-CEE plug Dimensions: 1050 x 1900 x 1250/2100mm, WxDxH NEW Machine With 12 months warranty

Coating machine ensuring perfect and uniform coating of products. A conveyor belt transports the product, which is submerged by a 4-cascade curtain to ensure full coverage of the product. The bottom of the product is covered during passage through an immersion device. The speed of the conveyor belt can be adjusted by the frequency inverter. The correct amount of batter can be adjusted with a valve on the feed. A specially designed hygienic fan blows the excess beater over the top of the product while the excess dough at the bottom is removed by an additional scraper or bottom vent. The blowing speed is controlled by frequency inverter and can be adjusted according to the application. - Production of high-quality products and extended production runs - 4-layer curtain for full coverage - Adjustable treadmill speed via variable speed drive - The amount of batter can be adjusted wi ...

Spiral Kneader / Mixer Model: SP 500 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 20 - 340 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 500 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 18.6 kW, 50A 32A-CEE plug Dimensions: 1150 x 2100 x 1550/2300mm, WxDxH NEW Machine With 12 months warranty

Spiral Kneader / Mixer Model: SP 175 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 5 - 120 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 175 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 7 kW, 22A 32A-CEE plug Dimensions: 1000 x 1900 x 1250/2100mm, WxDxH NEW Machine With 12 months warranty

- Designed to make any type of dough or sauce that requires quick or even cooking, or to work without temperature. - Manufacturer: INHOSPAN - Year: 02/2023 - Capacity: 100 L - Total power: 13.5 kW - Engine power: 1.5 kW - Voltage: 380 / 400 V three-phase - Frequency: 50 Hz - Dimensions (L x W x H): 740 x 1020 x 1730 mm - Variable speed drive - Digital Viewer Description:  - Designed and manufactured for various uses such as the preparation of croquettes, béchamel, sauces, custard, jams, syrups, etc. - Double-bodied stainless steel cauldron, cooking and heating. - Heating by stainless steel shielded electric resistors immersed in thermal oil, allowing uniform and homogeneous cooking. - 3 working positions: preparing-cooking (with the use of shovels), filling or cleaning and emptying (with removal of the shovels). - Stripping scoop with Teflon scrapers, preventing the p ...

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished "scotch brite" type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressu ...

Transport chain for scraper belt conveyors 450 K-3, 8,80m lang, Knoll, new -70% We have set a very low price! If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - For scraper belt conveyor Fa. Knoll 450 K-3 - The chain has 140 links and is therefore approx. 8.8m long - Chain link length 63mm, - Roll diameter 40 mm, - Clear width between the chains approx. 345mm - appr. 350 kg

WEIMA shredder for carpentry-carpentry sawmill waste -old wood etc. Type:WL 4. Feeding opening: 600x1050.mm. ( Log Funer ) Rotor diameter:252.mm. Rotor width:600.mm. Drive power:18.5kW. Tools: ( Knife piece 28.) 40x40.mm. Koncav Vs9lrq Weight:1300.kg.

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Total working hours is 3,000.. oil scraper Washing Chip Conveyor

Very good condition. Complete with chip scraper, driven tool, C-axis Low runtime (23520h) Technical data Swing over the bed: 500 mm Turning length: 600 mm Spindle speed: 20 - 5000 rpm Number of tools: 12 Hole: 72mm Tailstock quill diameter: 72 mm Tailstock sleeve stroke: 100 mm Total power requirement: 45KVA

Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.

Granplast shredder year 1996 cv. 5.5 soundproof mouth diameter 290 x 320 number of blades 3

Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool diameter with occupied adjacent pockets80 mmMax. tool length315 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12600 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 1 ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

Homogeneisive for renting Key figures: • Becomix RW60 CD + Feed container 50L • Working volume: 60L and 50L • Anchor agitator with scrapers and power breakers • Homogenizer with right/left barrel (homogenizing/pumping mode) • Circulation line • CIP • Lid hydraulically liftable • Fully automatic, control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics The machine is fully serviced and is available for rent. We take care of your project "Turn Key" incl. installation at your company as well as commissioning.

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

Used Molteni two-tank dissolver. The mixer has two tanks with capacity. 2,500 liters each. While mixing in the first tank, the second tank is emptied. Next the agitator from first tank is hydraulically lifted and transfferd to second tank. During mixing tank is rotated counter to the rotation of the dispersing disc. Hydraulic drive of the agitator. EX. Tank has a manual product scraper from the sides.

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

Complete RDF installation, consisting of: first shredder Lindner Jupiter 1800 second shredder Lindner Komet 2800 windshifter eddy current and magnet dust filter all conveyors

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

White M95 Poppy Mill used poppy mill from Weisse Bäckereitechnik Maschinenbau for sale from stock Bielefeld. Built in 2005 If necessary, always freshly squeezed poppy Maximum yield and very good quality of the grinding material With the adjustable pressure roller, the grinding quality can be individually adjusted High working speed Easy to use and clean Clean working by spring-energising scrapers

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 5 KW Machine dimensions in cm: Width: 80 Length: 100 Height: 190 Delivery time: 20 working days after advanced payment

Drais-Spangenberg, dissolver stirrer with scraper, container approx. 100 ltr., double jacket, container and dissolver in Edeltahlk, drive 22 Kw., 400 V. 50z, complete with control cabinet ... Drais-Spangenberg, Dissolver Stierer with Scraper, Vessel approx.100 ltr., Doubel jacket, Vessel and Dissolver are Stainless Steel, Drive is 22 Kw. 400 V. 50 Hz, complete with Controll Panel

Very well preserved crankshaft grinding machine RTM 260. Machine was newly scraped, spindles of eccentric adjustment replaced. Lots of accessories, 10 grinding wheels, user manual, balancing jack, tape filter system, etc.