We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,374 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
EKATO UNIMIX LM 4,5 laboratory vacuum and homogenizing mixer for the manufacture of cosmetic and pharmaceutical products such as emulsions, suspensions, creams, lotions and pastes, capacity from 1,0 to 4,0 litre, anchor stirrer with side and bottom scrapers (50-210 RPM), homogenizer/dissolver (8000-24000 RPM), jacketed for heating/cooling, usable for vacuum, maximum internal working pressure -1/+2 bar, maximum working pressure jacket 6 bar, maximum internal temperature 133 ºC, maximum temperature jacket 150 ºC, lid-lifting device, temperature control system, electrics 220V; 50/60 Hz, maximum power 3 kW.
used
Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm
used
Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.
used
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
used
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
used
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
used
Slot strainer,stainless steel,with motor scrape.
used
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x length x height (approx. 74 x 73 x 135 cm) with sheet metal wall attachment approx. 30 cm, three sides Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with sheet steel cabinet. All information without guarantee
used
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: width x length x height (approx. 94 x 76 x140 cm) Total height: approx. 118 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with various sheet steel boxes. All information without guarantee
used
Mixer,stainless steel,frame agitator with scrape,tiltable,Ø 740 mm.
new
Shredder | Cutting mill 18/45/ 7.5 kWt VGA for plastic 18/45 VGA Cutting mill for plastics, cable 7.5 KW, 80-140 kg/h. Model: VESPA 18/45 / 7.5 kWt VGA Throughput Kg/h: 80-140 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×225 Stator Knife Quantity/Dimensions Piece x mm: 4×225 Motor kW: 7.5 Weight Kg: 320 Capacity (cable) kg/h: up to 140 Capacity (plastic) kg/h: 80-120 Dimensions (mm) A 860 B-670 C-1480 D 1250 E 460 F 220
used
x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...
new
punching pressure: 28 t punching cross-cut in cmm: 31 in 7 mm round bar steel: 32,0 mm throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32 ltr. work height max.: 1.033 mm total power requirement: 3,0 kW weight of the machine ca.: 553 kg. dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Quick-change punch device up to Ø 31 mm - green series - - built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm - Free: LED lighting in the punching area - swiveling scraper (plates exchangeable) - Various material support tables are available separately - support frame - 2-step foot switch, with double press for grain search function - electrical controls - Infinitely adjustable stroke length and stroke position - Integrated hydraulic unit with oil filling - Performance data apply to a material strength of 450 N / mm² The data for this ad was cr ...
new
Shredding Machine Hacker Shredder Manufacturer: WEIMA-Maschinenbau Type: WL.4. Drive:18.5Kw. Feed opening:600x1050.mm. Rotor width:600.mm. double knife row (28.pcs.) Sieve size: still selectable
used
Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...
used
GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...
used
GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...
used
material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 4000 mm y-travel: 2200 mm z-travel: 250 mm Capacity: 3400 bar Number of working hours: 22000 h workpiece width - max.: 200 mm table load: 4 t/m² feed: 84 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 heads NR: W 136 scraper conveyor processing plant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...
new
Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...
used
table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire ...
used
Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21
used
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...
used
JÖNI MULTIMIX 400 ID.NO. 2140 Jöni Multimix cooking pot 400 liters with stirrer year of production 2013. Includes both scrapers to edges + bottom, Built-in steam generator heats between 15 - 125 degrees. Very nice condition! Dimensions 175 x 125 cm H 120 cm.
used
Chocolate tank 1,000 kg capacity Stainless steel Double-walled, insulated, heated Agitator with wall scraper: Drive 1.5 KW Heating: 9kW (3x 3kW) with circulation pump Temperature control and display in the control cabinet Price on request
used
Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.
used
Kromel screw conveyor is used in various industries for moving variety of materials. It operates by using a rotating helical screw blade within a tube or trough to move products to a given height or distance. Equipped with continuous feed product shredder which allows for the continual feeding of meat into the machine without stopping, saving processing time. Continuous feed shredders are more efficient compared to batch shredders, where the machine needs to be stopped to remove the product. Whole construction made of stainless steel, which guarantees the highest hygiene and ease of maintenance. Loading height: 1300mm / 1000mm without product shredder Unloading height (regulated): 2250mm or 1850mm Distance between loading and unloading section: 3700mm Total length: 4200mm Tube diameter: 200mm
used
RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv
new
Stop adjustment for Schellinger saw . Due to the frequent requests, the variant New was reissued. Specifications: Hub. 100 mm Lifting capacity. 3000 N (New) Lifting speed 28 mm/s Voltage: 400V 3AC 50Hz Mounting: Piston eye 16 mm body pendulum pin bolt 16 mm Limit switch Adjustable Limit switch Externally designed Thermal protection in the winding Protection class IP54 piston with scraper ring against chip dust
used
- Charge air cooler MWM - Suitable for several motors - Please note! Price per piece! It is a scrap part. - References -> 12301219 - 12141936 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By ...
used
Fritsch pastry line Type: Euroline with calibration head with guillotine with croissant rollers 3 & 5 rows Donut / Panncake Roller with different cutting rollers with foot switch with scraper with treadmill Good condition many accessories Height max. 200cm Width: 800cm Depth: 100cm
used
Stock# U2428-3 Used horizontal cooker by Berief Gmbh & Co. KG. with total volume 800 l. Cooking chamber has internal dimensions: diameter 1000 mm x lenght 1000 mm. Machine is rated for work on temperature up to 100 C inside the chamber. Heating channels have volume 55 l and are designed for work on pressure up to 10 bar and temperature up to 184 C. Tank is insulated and layered with stainless steel. Machine has mixing shaft with bolted 6 paddles, each one equipped with wall scrapper, and two side wall scrappers. Shaft is chain driven by el. motor 3 kW and gearbox. Discharge of tank by tilt, operated by el motor 0.55 kW. Top inlet has dimensions 100 cm x 54 cm, and is equipped with safety stainless steel bars and stainless steel cover. Machine is mounted on two supports integrated with drive and controls, however controls need rebuilding. Machine last time used in food industry.
used
Reactor tank with 16,000 liter capacity agitator, blade agitation system and scraped bottom. Prepared to mount on a bench with a weighing system with 4 load cells. Engine power 18.5 Kw. Model: DR-16 Weight: 3,800 kg Width: 2,550 mm Height: 5,200 mm
used
pressure: 80,0 / 110 t punching cross-cut in cmm: 27,0 in 20 mm L-beam: 120 x 13 mm L-beam: T 120 x 12 mm shear: flat material: 500x18 / 400x19 mm throat: 510 mm work height max.: 1050 mm total power requirement: 6,5 kW weight: 1650 kg range L-W-H: 1750 x 850 x 1850 mm very good condition () Furnishing: - hydraulic, combined profile steel shears with release station with punching station .. punching capacity 800kN Flat steel shears .. Shear capacity 100kN Angle steel scissors Angle steel knife for cutting 90 ° & 45 ° miters Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vertical basket bottom discharge used centrifuge with scraper, mounted on inertia plate. Type RINA 300F-1000 manufactured by RIERA NADEU. It belongs to the 300 series for liquid-solid automatically separation processes.
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...
used
Key data: 820 mm, 2000 mm, 515 mm
We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...
new
Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.
used
Machine has 30tns, 30001500, sheet thickness max 8mm, stamping speed 1100 hits/min, max positioning speed x/y 80/160, simultanious 100m/min, Siemens 840D, - scrap conveyor SC1T - Lifting scrap conveyor SC2 - Sheet lubrication, - Tool lubrication - Light guards 5 - safety net LD3000 - GSM Alarm - RS scrap conveyor - Lifting scrap conveyor RSC2 - tool adjust ACS - C1500 sorting belt conveyor - STS 3015 stacking system. - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: 45.000 - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Axis speed [X axis] max: 150 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness ...
used
Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm
used
Ott Edge Banding Machine Profimatik M 257-FÜ with pre-joining used, good condition Make Ott Type Profimatik M 257-FÜ Year of construction 2001 Banding thickness 20 / 25 mm Banding height 60 / 65 mm heated inlet ruler Thick edges up to 20 / 25 mm Caps from the roll up to 3 mm Pre-joining with DIA tools 2 x 1.8 kW Cross-cut unit 0°/20° - 2 x 0.8 kW Flush milling 2 x 2.2 kW Bevel milling 2 x 0.6 kW Radius milling 2 x 0.6 kW Radius Scraper Blade Copy corners 4 x 0.8 kW Grinding unit Edge finishing (buffing) Auto. Edge magazine Feed rate infinitely variable 8 - 24 m with motorized adjustment Granulate high-speed heating basin (EVA) Route control Program control with 98 programs Soundproofing hood Large roller support High-speed heating basin with automatic Synchronization and counter-rotation control of the glue roller Automatic ...
new
recoem scrap shear alligator scissors HKM 60 Cutting pressure : 60 t Year of construction : 2021 Condition : New Dimensions : L x W x H 2200 x 750 x 1100 mm Knife opening : 280 mm Knife length : 610 mm Cutting speed : 46 mm/sec. Power : 5,5 kW
used
REF-2494 URSCHEL CC-D SLICER-SHREDDER Shredder/slicer/strip cutter Urschel CC-D The slicer is designed to be used with cheese, coconut, cranberries, potatoes and other fruits/vegetables, cooked meats, surimi, and pet food. The CC-D model features different cutting forms including flat slices, strips, full shreds, oval shreds, V” Shreds, crescent shreds, and grating options. - Made of stainless steel - The machine features a continuous operation for uninterrupted production - It is also designed for an easy clean-up and maintenance. - The machine is sold with only one cutting head (choose one). Manufacturer: Urschel Model: CC-D Serial no.: 4865 Year: 2006 Motor: 10 HP (7.5 kW) Weight: 310kg
used
Capacity 3100 x 6mm Elevated table at the rear Walk-in protection Return to sender Scrap bin option at the front Machine has just arrived, more photos and information on request
used
Key data: 780 mm, 3500 kg
Description, subject to prior sale. Wire Eroding Machine Travels: X 500mm Y 350mm Z 300mm U± 32 V± 32 Taper angle (at workpiece height) 15° (100mm) Max. workpiece dimension (W x D x H) 1050 x 800 x 295mm Max. workpiece weight 800kg Table dimensions (W x D) 780 x 630mm Possible wire diameter 0.1-0.3 mm Coils intake 10kg Automatic jet of water threading Wire shredder Max. feed (X/Y) 1300mm/min Total dimension (W x D x H) 1883 x 2622 x 2150 Machine weight 3500kg Filtre unit: Tank capacity 708L Filter fineness 3μm Filter elements 2 Temperature control dielectric cooling unit Weight without filling 430kg Machine is in good working condition. Can be seen under power. Availability: short-term.
used
Key data: 780 mm, 3500 kg
Description, subject to prior sale. Wire Eroding Machine Travels: X 500mm Y 350mm Z 300mm U± 32 V± 32 Taper angle (at workpiece height) 15° (100mm) Max. workpiece dimension (W x D x H) 1050 x 800 x 295mm Max. workpiece weight 800kg Table dimensions (W x D) 780 x 630mm Possible wire diameter 0.1-0.3mm Coils intake 10kg Automatic jet of water threading Wire shredder Max. feed (X/Y) 1300 mm/min Total dimension (W x D x H) 1883 x 2622 x 2150 Machine weight 3500kg Filtre unit: Tank capacity 708L Filtre fineness 3μm Filtre elements 2 Temperature control dielectric cooling unit Weight without filling 400kg Machine is in good working condition. Can be seen under power. Availability: short-term.
used
Potato washing and destoning line consisting of : -potato elevator feeder. potato de-grounding washer. -Decanter tank and rotary filter. -Scraper with stones outlet. -Washed potato conveyor. -Washing tank and pump. Bi-directional conveyor with 2 outlets to 2 lines. -Conveyor for each line. -General electrical panel. The machine is connected and can be started up.
used
Description Shredding Line Single shaft shredder TPA type MCE year 2004 power 147 kW Rotor length 1500 Rotor diameter 400 Feeding conveyor belt Overbelt separator Gauss Magneti SM 69.45 year 2016
used
Description Single shaft shredder Rotor length 1500 Rotor diameter 400 Motor power 80,5 kW