We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Stephan Feinstzerzerer Type: MCH-D 50 Drive: 44 KW performance in the hour depending on the desired fineness of the starting product. 1500- to 3000 Kg/hour The machine is ready for operation as if from the customer. With new cutting kit
Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66
used
3 Shaft shredder with HARDOX spirals (approx. 500x1700mm), complete hydraulic system with Brevini gearboxes, new base frame with new steel construction, new hopper 6 cbm, inlet-opening: approx. 1100x1700mm, in addition: 7 reserve spirals available
Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg
used
Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets
used
Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK
used
Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal
used
Used and ready to use Crusher Mercodor ZM 2 year 2012 Mercodor paper shredder with special paper knives 500 x 440 mm and knives 14 mm 2 hooks power 11 kw
used
Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2
used
Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg
new
Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw
used
Einwellenschredder used in the tire recycling as a rubber mill. 2 motors with each 200 kW. Performance 4 t / h truck tyres.
used
Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw
used
- Drum Shredder/Shredder Pallmann - with inlet funnel - Serial number 0806.2006.0017
used
the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw
used
This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.
used
Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...
new
STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...
new
Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that ...
new
for all light/dark leftover breads etc. the universal shredder stainless steel output performance/ 1500 kg dry with schuettring Sieve 3 / 5 / 8 and 12 mm (included) connection 400V, 11 kW, 32A-CEE plug Mass: 720 x 810 x 1610mm, BxTxH emite ejection height 495 Qualitaet with 25 years of experience!; ready to go!
new
Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...
used
new
Technical data:- Funnel opening 1030 x 1235 mm- Funnel volume 1.5 m3- Power depending on material and screen size- Motor 30 KW- rotor diameter 360 mm- rotor length 1030 mm- Rotor speed 70 - 90 rpm 50 checker knife 30 x 30 mm - PLC control cabinet (completely wired) incl. 5 m cable-siebloung 8 - 40 mm after optional suction nozzle diameter 200 mm- slider with pressure beam- vibration-absorbing machine feet- Automatic star triangle start-up- automatic Off when idle- clock control to avoid unnecessary idle time- CE-Conform dimensions LxWxH 2455 x 1970 x 1730 mm- Weight 2600 kg
used
different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition
used
- 1 outlet nominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition
new
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 11,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.300 mm capacity : ± 2.500 kg / h for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V
used
Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition
used
Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...
new
Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
new
Cutting sets and moving in snails Suitable for Stephan Machines
used
4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)
new
The MR 40-80 is a powerful single-shaft shredder for many tasks, such as the pre-shredding of cables, the crushing of electronic waste, used plastics, wood, etc. Unlike other single-shaft machines, IRS's shredder has two instead of one series of stator knives for better product quality and higher hourly output. The optimized arrangement of the rotor blades also reduces energy consumption. The horizontally acting hydraulic pusher has replaceable wear strips and regulates the contact pressure on the rotor. In addition, there are interchangeable screens for special tasks from 10 mm hole diameter. On request, the shredder can be optimized for cooling the rotor shaft, with wear protection armor, hydraulic clutch, remote services and other options for the respective application. Specifications: Number of knives: 35 + 2 (rotor + stator) Rotor speed: 85 rpm Rotor Ø, length: 400 mm, 80 ...
new
n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.
used
mill low speed / crusher Moditec Bigger 10 2003 year // very good condition
used
Working Width: 450 mm Working Height: 220 mm
used
Working Width: 900 mm Working Height: 160 mm
new
The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.
used
Working Width: 800 mm Working Height: 300 mm Main Motor Power: 250 KW
used
Catalog No. 6796 TECHNICAL DATA - inlet width 410mm - inlet height 150mm - shaft diameter 800mm - number of knives 3 pcs - knife length 410mm - from the bottom, 6 pulling shafts, toothed - 2 pulling rollers, toothed from above - reverse gear - autoreverse - length of the conveyor belt 3500mm - width of the conveyor belt 390mm - main engine 37kW - feed motor about 4kW - feeder drive motor about 3kW - dimensions of the machine length / width / height 3300x2300x1900mm - feeder dimension length/width/height 3600x800x1000mm - weight about 7500 kg ADVANTAGES – Polish production – with a feeder – technical documentation – used chipper, very good condition Net price: PLN 75900 Net price: EUR 16323 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)
used
Working Width: 900 mm WorkinG Height: 240 mm
new
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 18,5 kW speed of the cutting drum : 112 rpm dimensions of the machine (l x w x h) : ± 2.950 x 1.600 x 1.780 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 7.000 kg/h for blocks of max. ± 810 x 650 x 350 mm number of knives: 7 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in Dolav boxes 3 x 400 V, 50Hz weight : 1.860 kg
new
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 9,2 / 11,5 kW speed of the cutting drum : 1st speed - 70 rpm / 2nd speed - 140 rpm dimensions of the machine (l x w x h) : ± 2.350 x 1.140 x 1.410 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 4.000 kg/h for blocks of max. ± 420 X 650 X 250 mm number of knives: 4 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in 200L eurobins 3 x 400 V, 50Hz weight : 980 kg
new
NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.
new
Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.
new
1 new funnel hacker DH 800 - 30 KW Rotor width 800 mm Rotor diameter 400 mm Number of knives 46 / concave sanded / quadruple rotatable Engine power 30 kW Electrics 400 V , 50 Hz Control control cabinet, blower cooled, with SIEMENS PLC Funnel opening 800 x 1300 mm (option: 1300 x 1750 mm) Funnel volume approx. 1.16 m3 (with hopper extension approx. 1.7 m3) Sieve as desired, 10 - 50mm Hydraulic 60 litre tank, external gear pump, oil cooler optional Dimensions ( LxWxH ) 2620 x 1738 x 1830 mm Weight approx. 3400 Kg (with hopper extension approx. 3550 Kg) Throughput capacity approx. 3 - 5 m3 per hour, depending on material and sieve Suction nozzle 200 mm, can be used on both sides Suction capacity at least 28m/sec. on suction nozzles
new
Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row
used
With gebr. Switchboard
used
Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.
used
Rotary cutting crusher Claas R 71.1 for woodworking companies Filling opening 1590 mm Machine height 1965 m Filling volume 1.8 m3 Drive power 11 kW Connection cable 4 x 10 mm2 Fuse 50 A Machine weight 1000 kg Capacity depending on feed material up to 1000 kg / h Low noise below 80 dB Plant is ready dismantled, in good condition. Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.