schaublin collets used for sale

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm

SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

x-travel: 300 mm y-travel: 150 mm z-travel: 355 mm spindle turning speed range: 58-2000 U/min table-size: 700x250 mm dimensions of the machine ca.: 1300 x 1100 x 1700 mmxmmxmm weight of the machine ca.: 0.85 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Bed length: 900 mm Headstock - turret distance: 300 mm Tip height: 102 mm Number of seats in the turret: 6 Diameter of the holes: 20 mm Collets Opening: 22 mm Connection: 380 V Spindle speeds: 840 - 3000 rpm. with accessories Dimensions: (LxWxH): 900x1300x1310 mm Weight incl. pallet: approx. 650

Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speeds 5,000 min-1 8-speed revolver Minimum quantity lubrication

centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 270 mm turning length: 400 mm control: FANUC 18i Manual Guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.

x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 330 mm y-travel: 400 mm z-travel: 380 mm spindle turning speed range: 63-2800 U/min table-size: 650 x 245 mm dimensions of the machine ca.: 1200 x 1600 x 1800 mmxmmxmm weight of the machine ca.: 1.1 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Support, travel carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information.

turning diameter: 330 mm turning length: 650 mm spindle turning speed - stepless: 30-5000 U/min spindle taper: ASA A2-5 control: FANUC 18i-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Schaublin Model: 180-CCN Year of Manufacture: 1997 Spindle Hours: 10,753 h Machining Capacities - Max. turning diameter over the bed (with revolver only): 330 mm - Max. turning diameter over the cross slide: 160 mm - Max. admissible diameter over the bed: 430 mm - Spindle centre height over cross slide: 83 mm - Max. distance between centres: 650 mm - Max. workpiece weight - with spindle A2-5: 25 kg - Max. workpiece weight - with spindle A2-6: 35 kg Spindle - Spindle nose ISO: A2-5 or A2-6 - Collet chuck compatibility (Schaublin): B45 / F48 (A2-5) | F66 (A2-6) - Max. bar diameter with B45 collet: 36 mm - Max. bar diameter with F48 collet: 42 mm - Max. bar diameter with F66 collet: 60 mm - Auto collet chuck through bore - A2-5: 170 mm | A2-6: 210 mm - Collet clamping force at 5 bar - A2-5: 2700 daN | A2-6: 3400 daN - AC motor drive: 15 / 18.5 kW (100% / 50% DE) - Motor ...

Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details.

for workpiece clamping on lathes, grinding machines and dividing heads with High concentricity and holding force - for workpiece clamping (bar or chuck work) in conventional single-spindle lathes and CNC lathes directly in of the spindle or in the collet chuck - smooth bores are mainly drilled in the sub-spindle of the CNC lathes used - Ø 2 - 2.5 mm 1 PC - Ø 5 - 6 mm 1 PC - Ø 3 - 4 mm 1 PC - Ø 4 mm 2 PCS - Ø 13 mm 1 PC - Ø mm various Auction-ID: A1-47017-25

Machine number: 219278 Operating voltage: 380 V Spindle passage: approx. 22 mm Spindle speed: 270-3000 rpm Centre length: approx. 350 mm Centre height above bed: 110 mm Turning diameter over bed: 220 mm Centre height over support: 70 mm Turning diameter over support: approx. 140 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuck including post collets and other suitable accessories Reference: Ulmer - Lot 16 Auction-ID: A7-46763-354

Assortment of collets and various accessories Auction-ID: A7-46802-32

Weight 28 kg Auction-ID: A7-47109-59

Weight 28 kg

consisting of six HAINBUCH collets type: SK100BZG diameter: 145 mm and two HAINBUCH clamping systems Reference: Hercegfi - Lot 65 Weight: approx. 70kg

Type: 65BZIG consisting of approx. 32 pieces Diameter: 100 mm Reference: Hercegfi - Lot 55 Weight: approx. 30kg

Type: 65BZIG consisting of approx. 29 pieces Diameter: 100 mm Reference: Hercegfi - Lot 57 Weight: approx. 30kg

Type: 65BZIG consisting of approx. 25 pieces Diameter: 100 mm Reference: Hercegfi - Lot 56 Weight: approx. 30kg

Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

Type: 65BZIG consisting of approx. 25 pieces Diameter: 100 mm Reference: Hercegfi - Lot 56 Weight: approx. 30kg Auction-ID: A7-46763-225

Type: 65BZIG consisting of approx. 29 pieces Diameter: 100 mm Reference: Hercegfi - Lot 57 Weight: approx. 30kg Auction-ID: A7-46763-226

consisting of approx. 23 pieces incl. hand clamp Reference: Pieper - Lot 30 Auction-ID: A7-46763-19

consisting of six HAINBUCH collets type: SK100BZG diameter: 145 mm and two HAINBUCH clamping systems Reference: Hercegfi - Lot 65 Weight: approx. 70kg Auction-ID: A7-46763-230

Type: 65BZIG consisting of approx. 48 pieces Diameter: 100 mm Reference: Hercegfi - Lot 58 Weight: approx. 50kg Auction-ID: A7-46763-227

Type: 65BZIG consisting of approx. 32 pieces Diameter: 100 mm Reference: Hercegfi - Lot 55 Weight: approx. 30kg Auction-ID: A7-46763-224

26x Large collets from Röhm / Hainbuch / Emuge, total weight 30kg Auction-ID: A7-47109-94

Also from Haimer Auction-ID: A7-47109-86

12x HSK-E40 mounts / shrink chuck / collet from Haimer / Garant Auction-ID: A7-47109-29