schaublin 9a used for sale

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 3890 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: No Starter Present , Rated Power: 1765 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 2200 , Generator Hz: 60 , Generator Volts: 440 , Generator Amps: 4011 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3516b-9an-1743191- used/22404, , = More information =, , Empty weight: 16.000 kg, Type number: 9AN-1743191

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Step chuck, precision chuck, bell pliers -Manufacturer: Schaublin, Step chuck precision chuck 7 pieces -Photography: see photos -Size: 21 to 50 mm, see photo parts list -Dimensions: Ø 56 x 120 mm -Submission/Price: complete -Transport dimensions: 230/115/H120 mm -Weight: 4 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm

SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

x-travel: 300 mm y-travel: 150 mm z-travel: 355 mm spindle turning speed range: 58-2000 U/min table-size: 700x250 mm dimensions of the machine ca.: 1300 x 1100 x 1700 mmxmmxmm weight of the machine ca.: 0.85 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Bed length: 900 mm Headstock - turret distance: 300 mm Tip height: 102 mm Number of seats in the turret: 6 Diameter of the holes: 20 mm Collets Opening: 22 mm Connection: 380 V Spindle speeds: 840 - 3000 rpm. with accessories Dimensions: (LxWxH): 900x1300x1310 mm Weight incl. pallet: approx. 650

Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speeds 5,000 min-1 8-speed revolver Minimum quantity lubrication

turning diameter: 270 mm turning length: 400 mm control: FANUC 18i Manual Guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Support, traversing carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 18i-TB turning diameter: 300 mm turning length: 366 mm c-axis: indexing: 0.001 ° turning speeds: 30-5000 / 30-6000 U/min tool taper: DIN 55026 A2-5 / A2-3 Overall size: 5600 x 1400 x 1900 mm weight of the machine ca.: 2.7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 6 pieces -Photography: see photos -Size: 51 to 79 mm, see photo parts list -Dimensions: Ø 88 x 120 mm -Submission/Price: complete -Transport dimensions: 270/180/H125 mm -Weight: 6.6 kg

Step chucks, precision chucks, bell-shaped collets, collet sleeves, collets, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 3 pieces -Photography: see photos -Size: 83 to 110 mm, see photo parts list -Dimensions: Ø 120 x 120 mm -Submission/Price: complete -Transport dimensions: 360/120/H120 mm -Weight: 4.2 kg

x-travel: 330 mm y-travel: 400 mm z-travel: 380 mm spindle turning speed range: 63-2800 U/min table-size: 650 x 245 mm dimensions of the machine ca.: 1200 x 1600 x 1800 mmxmmxmm weight of the machine ca.: 1.1 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information.

This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information.

1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.

Auction-ID: A1-45188-17

Auction-ID: A1-45188-16

Auction-ID: A1-45188-18

Bar supply of 4400 mm length There are no sufficient lifting equipment available to load this lot.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-75

Bar supply of 4400 mm length There are no sufficient lifting equipment available to load this lot. Auction-ID: A1-45188-11

\"The Schaublin 102 VM mechanical lathe is a high-precision machine tool designed for machining operations, especially the turning of metal parts. Manufactured by the Swiss brand Schaublin, known for the quality and reliability of its equipment, this model is particularly popular in precision mechanics workshops, laboratories and demanding production environments. Offered as is, it is an excellent opportunity for professionals wishing to acquire a robust machine to be put back into service or optimized. With dimensions of 200 cm in length, 77 cm in width and 155 cm in height, this lathe offers a comfortable workspace while remaining suitable for a standard workshop. Its weight of 400 kg guarantees high stability, which is essential to ensure optimal machining quality and limit vibrations. The Schaublin 102 VM is therefore a reliable and high-performance solution for turning jobs that req ...