schaublin 70 used for sale

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg

Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet chuck: W25 -Drawing: in the photos -Dimensions: 450/360/H170 mm -Weight: 11 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

x-travel: 300 mm y-travel: 150 mm z-travel: 355 mm spindle turning speed range: 58-2000 U/min table-size: 700x250 mm dimensions of the machine ca.: 1300 x 1100 x 1700 mmxmmxmm weight of the machine ca.: 0.85 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Bed length: 900 mm Headstock - turret distance: 300 mm Tip height: 102 mm Number of seats in the turret: 6 Diameter of the holes: 20 mm Collets Opening: 22 mm Connection: 380 V Spindle speeds: 840 - 3000 rpm. with accessories Dimensions: (LxWxH): 900x1300x1310 mm Weight incl. pallet: approx. 650

Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speeds 5,000 min-1 8-speed revolver Minimum quantity lubrication

centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 270 mm turning length: 400 mm control: FANUC 18i Manual Guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 330 mm y-travel: 400 mm z-travel: 380 mm spindle turning speed range: 63-2800 U/min table-size: 650 x 245 mm dimensions of the machine ca.: 1200 x 1600 x 1800 mmxmmxmm weight of the machine ca.: 1.1 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information.

Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.

1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.

Support, travel carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

turning diameter: 330 mm turning length: 650 mm spindle turning speed - stepless: 30-5000 U/min spindle taper: ASA A2-5 control: FANUC 18i-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Schaublin Model: 180-CCN Year of Manufacture: 1997 Spindle Hours: 10,753 h Machining Capacities - Max. turning diameter over the bed (with revolver only): 330 mm - Max. turning diameter over the cross slide: 160 mm - Max. admissible diameter over the bed: 430 mm - Spindle centre height over cross slide: 83 mm - Max. distance between centres: 650 mm - Max. workpiece weight - with spindle A2-5: 25 kg - Max. workpiece weight - with spindle A2-6: 35 kg Spindle - Spindle nose ISO: A2-5 or A2-6 - Collet chuck compatibility (Schaublin): B45 / F48 (A2-5) | F66 (A2-6) - Max. bar diameter with B45 collet: 36 mm - Max. bar diameter with F48 collet: 42 mm - Max. bar diameter with F66 collet: 60 mm - Auto collet chuck through bore - A2-5: 170 mm | A2-6: 210 mm - Collet clamping force at 5 bar - A2-5: 2700 daN | A2-6: 3400 daN - AC motor drive: 15 / 18.5 kW (100% / 50% DE) - Motor ...

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details.

Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty

Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7900 ( 7200 + 700 ) Nominal / outside width in ...

Transnorm belt curve conveyor left 90°-700-500-IR900 RA1967 Technical data: Frame width (NB): 700 mm belt width (GuB): 500 mm height (BH): 220 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s) Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.37 / S1 Belt:KT58, wear see pictures Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1997 condition: gut Nominal / inner radius in mm: 900 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: ohne Frequenzumrichter, without supports and side guides If you need other dimensions or individual ...

2025 BIG backhoe bucket 70cm with MS03 Symblock attachment, Technical specifications:, - Weight: 103 kg, - Recording width: 70 cm, - Contents: 149 liters, - CAT 3 - suitable for 2.8 - 3.9t excavators

2025 BIG backhoe bucket 70cm with MS08 Symblock attachment, Technical specifications:, - Weight: 210 kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9t excavators

Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg

cardan shaft, cardan shaft, universal joint shaft, drive shaft -Cardan shaft:Cardan joint shaft with length compensation and double joint on both sides -Dimensions retracted: 700 mm -Flange: bolt circle Ø 52 x 6 mm -Flange: outside Ø 65 mm -Sliding length: see photos -Total dimensions: Ø 65 x 700 mm -Weight: 4 kg

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, excellent conditions, installed power - used power in work: about 60-65% : 20.75, conditions: as new, availability: immediate, capacity: up to 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

ZERMA GSH 700/1000 (there are 2 machines available), 1.000 mm wide rotor, Ø 700 mm., n. 14 pcs rotor knives, n. 2 pcs stator knives, 90 kW drive, Screen 60 mm (or bespoke), 985 x 804 mm feeding hopper, Material that were processed: LDPE film, HDPE film, PP film, including the supporting structure, The machine is offered totally reconditioned with warranty, installed power - used power in work: about 60-65% : 90 kW, availability: 1 month, working width: 1.000 mm., options available: different screen size, conditions: totally reconditioned with warranty

Format: 740 x 1040 mm<br><br><br><br>br>Verf Gbar: Short-term

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 3,710 mm Diameter 1600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. All our tank systems are used in our company by selected employ ...

Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern.

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Moog valve for Battenfeld machine

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic Zapfpisole is new . Container dimensions Length 3,710 mm Diameter 1,600 mm Weight approx. 1,450 kg Of course, you can also use your tank system. We are happy to offe ...

<br><br><br>Still in operation: Yes<br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg