137,074 used machines on RESALE, but how to find them? Machine Search
Vegetable washing machine Pea washing system Blanchier Drum Steinausleeser cleaning system Suitable for legumes, vegetables and similar products. The system was used for washing, cleaning and sorting peas.Was formerly used for washing blanching cooling Components e.g. - Acceptance tape - Leaf wind cleaner - Siebreiniger - Circulating conveyors - Wet flood canal - Stone reading - Wet sieve drum - Water collection tank with water purification drum and pump - Discharge circulating conveyor The machines are product-contacting made of stainless steel. Power approx. 10-15 to/h, depending on the product. The plant has already been dismantled, item site 01587-Riesa. A visit is possible at any time.
Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.
System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new
Aggregate screening line. Year of production (installation) - 2004 Installation capacity - 4 t / h Grain size of the screened material 0 - 6mm The line includes: 1. Storage silo - 20 tons 2. Raw material hopper 3. Vertical bucket conveyor PK-250-200 / 9200 - manufacturer WAKRO Sp. Z o.o 4. Vertical bucket conveyor PK-250-200 / 8000 - manufacturer WAKRO Sp. Z o.o 5. PKS-200/4200 screw conveyor - manufacturer WAKRO Sp. Z o.o 6. PKS-200/2800 screw conveyor - manufacturer WAKRO Sp. Z o.o 7. PKS-250/2515 screw conveyor - manufacturer WAKRO Sp. Z o.o 8. PKS-250/5300 screw conveyor - manufacturer WAKRO Sp. Z o.o 9. Ball mill 10. Air filter FPK-23/25 - manufacturer WAKRO Sp.z o.o 11. The PWL2-1 / 2,2-Ew2 linear vibrating screen - producer NOWET Sp.z o.o
REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber
Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg
Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe
Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.
Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.
Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.
Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.
Bevel scale Manufacturers: Bizerba Minimum load: 10 kg Maximum load: 500 kg 1 tick: 200 gr Scale is in working and in good condition!
Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.
Bevel scale Manufacturer: Toledo Year of construction: 1972 Capacity: 10 kg - 320 kg Part 1, section: 200 gr In good condition!
Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...
with 12 closing heads for top caps (Piccolo plastic caps) running direction: left - right
Fig.1 screen master 2000 Regulating, control and recording device was used in a dairy to control and record the milk heater.
Sieve, vorsieb 3 deck, bar screen. Mogensen Stangensizer 3 floors. type: VM 2036 ruettler with 2 4.6kw 1000 rpm.
Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.
Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.
dimensions – Height (soundproofed) [mm] 930 – Height (supersonic insulated) [mm] 2120 – Width (acoustic/supersound-insulated) [mm] 1200 – Depth (acoustic/supersound-insulated) [mm] 980 weight – soundproofed [kg] 315 – supersound-insulated [kg] 365 Highest sound pressure level [± 3 dB(A)] according to DIN 45635, part 13 86/79 – schallg. / supersound-insulated [dB(A)] Measuring area measure 15/15 schallg. / supersound-insulated [dB(A)] Formwork power level 101/94 – schallg. / supersound-insulated [dB(A)] compressor compression final temperature [°C] 110 Volume flow to PN 2 CPTC 2 at: – pmax = 8 bar [m3/min] 3.35 – pmax = 10 bar [m3/min] 2.85 – pmax = 13 bar [m3/min] 2.45 Motor Rated power [kW] 22 rated speed – 50 Hz [min-1] 3000 – 60 Hz [min-1] 3600 Protection class IP 55 Design IMB 3 ISO Class F Electrical connectio ...
Drum/screen for Doppstadt SM - model -Chain drive (24 B1) -sandblasted, newly painted Very good condition Available drums: 1. for Doppstadt SM518 / length: 4.7 m / diameter:. 1.8 m /. Price: 19900 PLN: 4800EUR -15 x 15 mm -20 x 20 mm -25 x 25 mm -30 x 30 mm -35 x 35 mm -Fi 80mm 2. for Doppstadt SM618 / length: 5,5 m / diameter: 1.8 m /. Price: 23000 PLN: 5500 EUR -12 x 12 mm -15 x 15 mm 3. for Doppstadt SM620 / length: 5,5 m / diameter: 2.0 m /. Price: 25000 PLN: 6000EUR -10 x 10 mm - 13 x 20 mm -Fi 45 4. for Doppstadt SM718 / length: 7.1 m / diameter: 1.8 m /. Price: 27000 PLN: 6450EUR -10 x 10 mm -70 x 70 mm -Fi 150 / 1 szt. 5. for Doppstadt SM720 / length: 7.1 m / diameter: 2.0 / m /. Price: 31000 PLN: 7400EUR -12 x 12 mm
Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.
Producer: BIZERBA Type: ITE Max weight: 60 / 100 kg Min. weight: 400 g Pedestal dimensions: 450 x 600 mm Connection: 230 V Platform scales BIZERBA type ITE Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Material: mild steel Drive: 5.5 KW Weight: 1750 kg Area per deck: 5.2 m²; Machine fully reconditioned with new bearings. Brush cleaning / filter inserts of your choice: 0.1-5 mm. > > conversion and advanced construction possible.
New magnetic tape, E-or hydraulic drive, if you have questions 0049016044 44300
consisting of: 1 x ultrasonic screening, manufacturer: Sodeva, type: separ class BT 1034 1 x electrostatic precipitators, manufacturer: AT conveying devices, type: 520 1 x vacuum conveyors, manufacturer: Volkmann, type: VR 170 - F 200 2 x mobile collector.
Screw vacuum pump Running Status: As good as new Performance: 12 months Zubehoer: User manual delivery time: ex stock; ready for use
Screws station from the PV or solar industry, which gets just Aufwindabsolut as new ca 30 BetriebsstundenNeupreis for both plants, lt invoice 256.000,-€ to the mount out of so-called carrier frame inserts Graphitzum coat 2 stations in this range of solar modules for subsequent thermal treatment are Duennschichttechnologiees, are hardly separable, there is only a control or control cabinet for the whole SystemUnterlagen are available
From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...
Weighing with maximum flexibility The larger counterpart to the 1-head scale is suitable for faster manual filling, as well as for small automations. Application: Dose free-flowing products in accurate quantities. Suitable for manual filling and automation Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 2 • Volume weighing container: 4.5 liters • Bunker volume: 35 liters • Weighing range infinitely adjustable between 50 and 3,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 30 w ...
Attachment: eccentric screw pump Manufacturer: Allweiler Type: On BP 6.2 E21 P01 Machine number: 7612455 Year of construction: 1998 Performance: 1.67 8.3 l / h Speed: 120-600 1 / min Engine: Nord, type SK Voltage: 400 V Length: approx. 900 mm Condition: used, ready
Screw vacuum pump Manufacturer: Busch Type: NX 450 A Suction plugs: 450 m3/h Performance: 12 months Including: operating instructions, oil filling Status: as available as new date: by arrangement; ready for use
Attachment: eccentric screw pump Manufacturer: Allweiler Type: BN 2-24 Machine number: 160450 Year of construction: 2003 Output: 50-2500 l / h Speed: 35-360 1/min Pressure: 1-15 BAR Engine: Nord, 3 kW Voltage: 400 V Connection suction side: DN 65 Port side: DN 50 Length: 1500 mm Other: with ventilation F100 Condition: used, ready
Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...
Attachment: eccentric screw pump Manufacturer: Allweiler Type: AE1E 550/10 / 11 Dr Machine number: 7218305 Year of construction: 1993 Performance: Q 70 / 417 l/min, n 60/330 1/min Engine: 5.5 KW katt Voltage: 380 V Connection suction side: DN 100 Port side: DN 100 Length: 1900 mm Condition: used, ready
Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak Cap Applicator 21, TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved
FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 15-6LT Commission no.: 96373 Year of construction: 1997 Flow rate: 14 m ³/h Pressure in the pressure port: 2.00 bar Speed: 344 rpm Motor: kW 2.24 Inlet: DN 80 PN 16 DIN 2533 Pressure connection: DN 65 PN 16 DIN 2533 Material: Main body GG25 Shaft: 1.4021 Stator: NBR Buna Rotor: 1.2436
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 35-12 Machine number: 176490 Year of construction: 2005 Power: 2-40 m3/h Pressure: 1--8 bar Speed: 1450 RPM. Connection suction side: DN 150 Port side: DN 125 Length: 2400 mm Condition: used, ready
Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure
Attachment: eccentric screw pump Manufacturer: Netsch Type: NE 20 B Machine number: 263384 Year of construction: 1995 Power: 1,3 m3/h Pressure: 12 bar Engine: HEW, 0.37 KW, 400 V, 1380 RPM Connection suction side: DN 40 Port side: DN 40 Length: 1200 mm Condition: used, ready for operation, with variable speed gears
Attachment: eccentric screw pump Manufacturer: Netsch Type: A 60B Machine number: 263381 Year of construction: 1995 Performance: 19 m3/h at 2 bar Pressure: 1--8 bar Motor: 4 KW, 400V, speed 1445 RPM Connection suction side: DN 100 Port side: DN 100 Length: approx. 2000 mm Condition: used, ready
Complete screw and cylinder with filament and lockable nozzle. NEW!
Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...
WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...
Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch PN. pressure max. 8 bar Load max 8 kg Weight robot 51 kg + Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see picture Since the article is available several times and the robots carry different working tools these are only sample pictures and may differ. Item condition used (Changes and errors in the technical data, information reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please ...
Attachment: eccentric screw pump Manufacturer: Netzsch Type: 2 NE 60A Machine number: 221234 Year of construction: 1990 Power: 47 m3/h Pressure: 4-8 bar Speed: 1450 RPM. Engine: North Power: 15 kW, 400 V Connection suction side: DN 100 Port side: DN 100 Length: approx. 2800 mm Other: with an electric variable speed gears Condition: used, ready
maximum number of results exceeded
please refine your search
