sawing used for sale

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod

The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power  ...

Key data: 400 mm

Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades

Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW

Opus 550 TF Table dimensions: 600 x 760 mm Depth of throat: 550 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Power needed: 4.2 kW Weight: 900 kg

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

Grecon Dimter OptiCut 304R Optimizer Length of entrance timber min. 900 mm when loading on a cross chain conveyor Wood width min./max. 40-200mm Wood thickness min./max. 15-80mm Lowering, cutting and accelerating: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Wood cross-sections max. 200×25 mm, 170x50mm, 80x80mm, 140×60 mm Saw blade diameter 400 x 30 mm Saw blade speed 4200 rpm. Feed max. 170 m/min Material pick-up conveyor with 6 dodgehammers Cutting Modes: 1.Cut to fixed length 2. optimization of board length to maximize efficiency, 3. removal of wood defects with chalk marking of defects Length of the entire line 21m Year of manufacture 2000

Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile

Qty. 1 Second-hand automatic saw socket production line Mfc.: ADIGE SYS Type: BC 80 Built: 2022 The BC80 is a high-productivity vertical rotary transfer machine that allows you to cut and chamfer tubes and solid bars. Its main features include: fully automatic operation; separate management of scrap and chips; protection for fragile tubes; centralized adjustment for diameter changes; and a simple and intuitive graphical interface. The BC80 is the highest-performing and most efficient solution on the market for the continuous, 24/7 production of bushings up to 80 mm in diameter and from 10 to 350 mm in length. The BC80 can produce up to 2200 parts per hour, cut to length, chamfered, and inspected from a tube or solid bar. Round tube cutting capacity: min. 10 mm (0.4") - max 80 mm (3.15") Bar cutting capacity: 60 mm (2.4") Workpiece length: min. 10 mm - max. 350 mm Loader l ...

2 x Band saw Type: HA 250 W Manufacturer: Amada Year: 1991 Saw blade: Dimensions: 32 × 0.95 × 3505 mm Blade speed: 20 – 80 m/min (50 Hz) 24 – 80 m/min (60 Hz) Cutting capacity: Round material: Ø 250 mm Rectangle: 300 × 250 mm Saw motor: 3.7 kW Hydraulic pump: 0.75 kW Coolant pump: 0.18 kW Power consumption: 6.9 kVA Stroke length: 400 mm Worktable height: 700 mm Maximum workpiece weight: 1500 kg Machine weight: 1200 kg Both machines in good condition, fully functional Find more here - / Contact us at -

Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing

Machine number: 232597 Operating voltage: 400 V Nominal current: 32 A Belt length: 5080 mm Control: SIEMENS SIMATIC HMI Material support height: 1200 mm Roller diameter: 630 mm Projection: 370 mm Maximum cutting height: 320 mm Guide rod (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Sawing parameters - Belt speed: 250 - 2000 m/min incl. roller conveyor width: 350 mm Reference: Heraeus Auction-ID: A7-46763-336

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...

Auction-ID: A7-46691-37

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

Min. saw diameter 5 mm, max. saw diameter 260 mm, MEBA NC control, fast single cut at the touch of a button, MEBA roller belt 3000mm height adjustable, connected loads 380 V 16 A, hydraulic clamping pressure control for thin-walled components, mitre cut 40° - 90° stepless, WIKUS Marathon M42 saw blade, incl. 3x spare belts Auction-ID: A7-46993-2

automatische bandzaag ronde inhoud: 360 mm Capaciteitsvierkant: 360 x 360 mm spanentransporteur Depth of throat: 360 mm Max height of workpiece: 360 mm Table travel : Manual (1) -- hydraulic (2): hydraulic Sawspeed: 20 > 80 m/min Length of band saw: 4420 x 32 x 1,1 mm Power needed: 3,7 kW Length : 2500 mm Depth : 2200 mm Height: 1600 mm Weight: 2 ton

Well-functioning band saw machine for wood and plastic Auction-ID: A3-43538-19600

- technically efficient, ready to work – after full service - disc diameter: 450 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

Auction-ID: A1-40976-13

Auction-ID: A1-40976-36

Cutting length: 4220mm; cutting width: 4250mm; maximum saw blade height: 92mm; main saw motor: 11kW; Stride motor: 2.2 kW; equipped with automatic five-way height adjustment saw blade; 7 collets 65/250/400/990/1610/2230/3470mm; 3x air cushion table 600x1800mm with fan Auction-ID: A1-44305-25

Core drilling motor with tripods for drilling with diamond bits 1 1/4\" mounting; heavily used; Auction-ID: A7-47086-37

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com Auction-ID: A7-47228-14