saw auto used for sale

X stroke: 6500 mm Y stroke: ~1000 mm Z stroke: ~600 mm Power: 25 kW Power supply: 400 V / 50 Hz Automatic tool magazine Spindle speed: up to 18,000 rpm Machine for processing aluminium profiles Auction-ID: A1-44765-208

Three similar Tsugami Swiss-type CNC lathes are available. Years of manufacture: 2014/2016/2016, max. bar capacity: 32mm, max. machining length: 320mm, max. drilling diameter main spindle/counter spindle: 12mm/10mm, speed: 8000rpm, tool stations: 31, max. slot milling cutter diameter: 45mm, rapid traverse Z: 32m/min, rapid traverse X/Y: 24m/min, resolution: 0.1mm. Machine dimensions X/Y/Z: approx. 2150mm/1300mm/2050mm, weight: approx. 3500kg, control: Fanuc, operating hours 1/2/3: approx. 12265h/39970h/39470h. Documentation available. An on-site inspection is possible. Individual sale possible, however a package sale is preferred.

Highlights - CNC FANUC 32i - 6 linear axes - 2 programming channels - 2 electrospindles - C-axis standard for main spindle and sub-spindle - 25 Vehicle positions - 4 radial driven tools for slides 1 - 4 radial driven tools for slides 2 - Machining on the main spindle possible with 2 tools at the same time Technical description I-A1023 GILDEMEISTER SPRINT 20|8 CNC Swiss Automatic Lathe CNC CNC FANUC 32i TECHNICAL DATA MAIN SPINDLE Turning diameter max.: 20 mm Stroke Z1: 60 mm 180 (with option I-C1002) Max. speed: 10,000 rpm Nominal drive power S1: 2.2 kW SUB-SPINDLE Turning diameter max.: 20 mm Stroke X2: 220 mm Stroke Z2: 170 mm Max. speed: 10,000 rpm Nominal drive power S1: 1.5 kW CNC-CONTROLLED AXES Rapid traverse speed: 32 m/min Max. acceleration: 5 m/s2 Feed force (S1) axes Z1, Z2, X1, X2: 150 daN Feed force (S1) axis Y1: 370 daN Feed force  ...

Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...

consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm

Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

MBO K 800.2 SKTL/6 AUT year 2007 pallet feeder 6 buckles 2 knives 1 side buckle Navigator control Compressor Palamides Delta 703 year 2006 good condition in production available immediately

Fully automatic coffee machine LA CIMBALI S15 CP10, 2 grinders, 1x powder container, dimensions approx. 350 mm wide x 605 mm deep x 715 mm high, weight approx. 50 kg, 2 x keys, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Fully automatic coffee machine SIELAFF Siamonie Smart OCS XL 1, 1x grinder, 3x instant powder, fixed water connection, dimensions approx. 580 mm high x 380 mm wide x 540 mm deep, weight approx. 47 kg, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Wall-mounted cable reel Length of the extendable cable 20 meters Cable cross-section 3 x 1.5 mm2 IP protection class IP34 Maximum power rolled up 1000 watts Maximum power rolled out 2300 watts Connection voltage 230V / 16A V / A Weight 7.0 kg Dimensions L x W x H 400 x 400 x 200 mm Condition: never used / new (5) Auction-ID: A1-45681-908

1,500 W output voltage 80 V 60 A, Auction-ID: A1-45526-9

BMM Weston Ltd 'V12773' Bulk Steam Sterilizing Unit' (Qty 2, 2019) BMM Weston Ltd 'V8101' Blowdown Vessel (2019) Fini Compressors 'Micro SE 4.0-10-200' Laboratory Air Compressors (Qty 2, 2019) Serbatoi Autoclavi 'P27011X' Pressurized Air Tank (2015) Auction-ID: A7-45439-1

Table size 2000x1380mm, width between bridge uprights approximately 3650mm. Auction-ID: A1-45188-243

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-146

Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 2, Pickup spindle, hydraulic in pos. 6, Mechanical double slide in pos. 6, Pneumatic workpiece unloading device, High pressure coolant system with chiller, Swarf coneveyor, worm type with magnetic filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Auto bar loader: Iemca PRA 52 F

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-152

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-112

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-149

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-36

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-150

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-148

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-145

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-151

part of this lot is only one pcs. which you see on the foto Auction-ID: A7-45452-147

Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-44885-29

Equipped with: electric motor, cleats, brushes, collector Auction-ID: A1-41992-84

Spindle diameter 255 mm SMW autoblok 250 BB  12-place motorized turret tailstock and bezel Auction-ID: A7-44885-38

ATS control cabinet (grid ↔ generator) Equipped with DSE control module (Deep Sea Electronics) Suitable for 3-phase applications (±63–125A estimated) Including: Lifting eye (crane movement) Fork Sleeves (Forklift) 12V lead-acid battery Auction-ID: A1-41992-142

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.

Low Usage 2018 SAGAFLUID Automated Robotic Sampling & Dosing System Overview High-precision industrial installation designed for the automated preparation and dosing of chemical samples. Built in 2018 by SAGAFLUID for a Tier 1 energy company (REPSOL), this system combines gravimetric dosing, controlled heating, and collaborative robotics. Condition & Usage The equipment is in excellent condition with very low operational hours: approximately 350 hours of use between 2019 and 2020. It has been maintained under industrial standards and includes full technical documentation. Key Technical Features Advanced Dosing System: Equipped with 28 dosing pumps for raw materials (MM.PP.) and a high-precision gravimetric scale. Includes an automatic anti-drip system and programmable recipe selection. Robotic Integration: 1 Collaborative robot for container handling. 1 Robot equ ...

Agilent G1811A XY Autosampler Autosampler Type: XYZ Robot with Stationary Rack Design Needle positioning performance: X, Y, and Z resolution: ±1 mm X, Y and Z repeatability: ±0.25 mm X- and Y-axis arm speed: 250 mm/s Z-axis: 126.9 mm/s Rack Capacity: Up to four 21 Series racks Dimensions: 21" W x 17" D x 14.5" H (53.5 × 44 × 37 cm)

with cutting motor: 1.5 kW, 3-phase, 1 M (inverter controlled) Pitch setting (L): Max. 1200mm, including: metal trolley: 1050 x 500 x 880 mm (L/W/H), including: rolling stand with contents, dimensions: 1840 x 1630 x 900 mm (L/W/H) Hall 1 Auction-ID: A1-45762-1

Test station including: 1 x Staudenmaier built in 1194 pressure vessel (autoclave), 1 x test table with motor, diaphragm vacuum pump, lamp and 1 x office chair including pressure vessel with frame Dimensions: 110 x 79 x 210 cm Table dimensions: 121 x 74 x 154 cm (L/W/H)1 Auction-ID: A1-45762-3

Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, DRO, elecro-permanent magnetic plate

New autoclave Manufacturer: Getinge AB, Sweden Type GE 666 AR-1 Year 2019 Usable chamber size 660 x 672 x 660 mm (WxHxD) Volume of the chamber approx. 298 liters External dimensions: approx. 1,450 x 3,000 x 1,700 mm (WxHxD) Weight 750 kg Service Guide Left Hand Single-door model with automatic vertical sliding door GMP

Passenger car ALFA ROMEO 166 3.0 V6 automatic, first registration 29.09.1999, according to the statement of the owner under 200,000 km, approx. 166 kW, VIN ZAR936000000000034454, leather, automatic transmission, electric driver's seat heated, wooden steering wheel, EASP, single-family home, air conditioning, colour no. 814, bought in 2019 with defective control unit automatic transmission, 3-speed still possible according to driver's statement, HU 07/21, no vehicle documents available

Serial number: 001 Laser Type / Power: Laser 2100 W Power required: 19 kVA Working capacity: Maximum sheet size 3070 x 1550 x100mm Maximum sheet weight: 920 kg Sheet thickness: 0.8 – 25 mm Feed (X/Y): 120 m/min Feed (Z): 80 m/min CNC Control: AMNC-F Simultaneous 3-axis control Operating hours (according to CNC display): Power ON: approx. 45,300 h Operating time: approx. 35,800 h Cutting time: approx. 22,600 h Automation model: LST 3015 LCG A Automatic loading/unloading system: LST 3015 Double cutting table Working capacity: Maximum sheet metal size 840x 940mm Table swap time: approx. 35 sec Dust Extraction Unit: Donaldson Torit DCE Refrigeration unit included Operator control console included Auction-ID: A7-44864-52

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

TSUGAMI B0206E-II Sliding Headstock CNC Lathe TECHNICAL FEATURES: Year: 2014 NC Type: FANUC series 32i-B Number of axes: 6 X1 Axis Fast Feed Speed: 24000 [mm/min] X2 Axis Fast Forward Speed: 24000 [mm/min] Z1 axis fast feed speed: 32000 [mm/min] Z2 axis fast feed speed: 32000 [mm/min] Y1 Axis Fast Feed Speed: 15000 [mm/min] Y2 Axis Fast Feed Speed: 15000 [mm/min] Maximum diameter in bar: 20 [mm] Minimum speed. Spindle: 200 [rpm] Maximum speed Spindle: 10000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Minimum speed. Spindle: 200 [RPM] Maximum speed Spindle: 12000 [rpm] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 2.2 [kW] Number of end device positions: 8 Number of comb positions 1 : 5 Number of motorized comb stations 1 : 3 Comb Turning Tool Speed 1: 8000 [rpm] Number of counter-operation positions: 8 Number of counte ...

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45832-37

Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-45832-93

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Automatic strapping machine + metal dispensers + feeder Auction-ID: A1-45489-40

AUTOMATIC DIGITAL REFRACTOMETER MDEL : RX-5000 ALFA BRAND : ATAGO TYPE : TOUCH SCREEN SCALE : Refractive index RANGE : Refractive index (nD) 1.32420 to 1.58000 BRIX : 0.000 to 100.00% SOLUTION : Refractive index (nD): 0.00001 Brix 0.01% temp 0.01C ACCURACY : Refractive index (nD): 0.00004 Brix 0.03% TEMP CONTROL RANGE : 5.00 to 75.00 C DIMENSION & WEIGHT : 37 x 24 x 14 6.6 kg POWER SUPPLY : AC100V to 240 V, 50/60Hz CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove

Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically Optional equipment: version with ultrasonic welding Odometer reading: less than 2,500,000 straps Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 2,950,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available