sav used for sale

oven 10 - 1150 Celsius inner 1x1x2m plc auto door various size possible Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfe n Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce  ...

GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMEN ...

Dough dividers for traditional handicraft products for exceptional bread/pastry quality " The Original " Robust dough divider for flexible use Press plate, cutting & punching grille easily replaceable Manual sharing and moulding of the dough Reinforced execution Ergonomic division from direct processing to long-term management Pull-out bracket for the dough part tub Device is space-saving and 4 inserts can be stored no power connection required, maintenance-free As standard with: 1 punching grid, 1 dough tray, 2 silicone bases Visit our great sales shop!

ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...

working width: 1250 mm maximum length of workpieces 3500 mm feed speed 2.4 - 7.5 m / min finishing line consisting of the following elements: - infeed conveyor - brush sander with 4 transversal brusches - brush sander with 2 longitudinal brushes - dust removal with brush and blowers - Spray cabin Rotoclean G8 rotating arm with 8 pistols workpiece recognition for saving paint workpiece transport with steel belts recuperation and cleaning steel belts air cleaning with water curtain - 3 lacquer pumps GRACO 015.085 - 7 pumps for color stain GRACO Husky 515 - intermediate conveyor - cross transport with rods and overhead hot air dryer - intermediate conveyor - drying tunnel with IR lamps - UV dryer with 2 lamps - outfeed conveyor

Location: Kirchberg am Wagram Can be visited on site. This type of machine is a combined machine with hood cover and shrink frame. The machine is designed up to a maximum of 60 pallets / hour, whereby product type – film thickness – film quality – pallet height are decisive. The basis are Euro pallets with 1200 x 800 mm - conversion to industrial pallets is possible This machine was used by one of the European market leaders, a building material manufacturer. The machine was regularly serviced by the factory technician and is in a used but very good general condition. The machine has an open burner system, which has proven itself because it is very insensitive to dirt. The combined design saves space The machine is known for its very high availability Comparable machines are now available for about 200,000 euros

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

: 36/72 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm dimensions of saw-band: 3650x27x0,9 mm total power requirement: 1,5/1,8 kW Overall size: 2130x1400x1950 mm Weight: 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-chamber press C400 | C600 | C800 C400 (with two pressing chambers) C600 (with three pressing chambers) C800 (with four pressing chambers) Specifications: Motor 1,5kW Electronic voltage 230V/50Hz/1-F. Maximum pressing force 6.5t Working pressure 150bar Cylinder stroke 700mm Time press cycle 50s Press chamber (LxWxH) 730x600x830mm Insertion height 1060mm Insertion opening (LxW) 730x600mm package size (LxWxH) 730x600x400mm Package weight 30-40kg Binding rolls 8x6x4x Strap type (polyester) 9mm/250m Number of containers 4x3x2x Length ges. 3455m; 2615mm; 1775mm; 17775mm Width ges. 1050mm Height ges. 1955mm Weight ges. 1955mm Weight ges. 1090kg; 880kg; 670kg; 510kg Transport dimensions C400 !x container Length 1680 mm 840 mm Width 845 mm 845 mm Height 1955 mm 1060 mm Weight ges. 210 kg Multi-chamber press C400 (with two pressing chambers) C600 ( ...

pressure: 80 t throat: 250 mm stroke: 10 - 115 mm no. of strokes: 60 Hub/min dayligth: 285 mm distance table - lower edge of ram: 400 mm ram adjustment: 50 mm table-size: 500 x 750 mm ram head dimension: 340 x 440 mm work height max.: 700 mm table hole: 220 mm ram hole: 45 mm total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 1,4 x 2,5 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high  ...

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,71 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m ACTION PRICE ! High Performance Vertical Circular Saw Hydropneumatic Fully Automatic. (20192) · Miter left 60 ° + right 45 ° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Quiet, powerful worm drive with large Gear ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-profile cuts.Additionally with lateral quick shift at miter change · Precision prism guide of the gearhead, laterally adjustable · Particularly stable undercarriage with built-in automatic cooling · Large chip drawe ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindric ...

Baler, press for cardboard, film paper V5 | 5t Bale size: 700 mm H (variable) × 750 mm W × 500 mm D Bale weight: 50–100 kg Pressing time: 28 seconds Pressing force: up to 5 tons Dimensions: 2015 mm H × 870 mm W × 655 mm D Filling opening: 750 mm W × 385 mm H Integrated bale ejection mechanism Weight: 340 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification V5 SMALL BALER Versatile, efficient and simple operation: The V5 baler is ideal for small and medium-sized companies. Even with a small amount of material, it creates order, cleanliness and space. The setting of the pressing cycle on the V5 can be done either automatically or manually. With the help of the "Easy Tie" system, the finished bale can be tied quickly and conveniently when the door is ope ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

: 3,0 mm ST 40 : 2,0 mm VA : 90° Grad blade length: 130 x 130 mm table:: 600 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 170 kg range L-W-H: 630 x 660 x 1270 mm Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe The data for this ad was created with ModulMWS - the sof ...

Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with efficient centrifugal wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing device No pre-washing or scrubbing by hand thanks to vigorous washing with water and granules Great hygiene and fast drying with centrifugal cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be done from the front or from the side Effective dishwashing and high capacity with double dishwashing sy ...

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg Working height minimal: 350 mm Working height maximum: 1800 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1450 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1047 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical360° left/right rotation. A typical configuration is composed of a motorized headstock p ...

pressure: 30 t throat: 180 mm stroke: 10 - 75 mm no. of strokes: 125 Hub/min dayligth: 225 mm distance table - lower edge of ram: 300 mm ram adjustment: 50 mm table-size: 360 x 560 mm ram head dimension: 260 x 340 mm work height max.: 670 mm table hole: 140 mm ram hole: 35 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,1 x 1,3 x 2,0 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This hig ...

Make : Lutro Year of construction : 2005 Dimensions : each 4.0 m x 10.0 m x 4.0 m (LW approx. WxLxH) Supply air ceiling : Filter ceiling over the entire surface Lamps above : 2 x 5 pcs recessed luminaires with 4 x 58 W each Lamps side : 2 x 3 pcs recessed luminaires with 3 x 58 W each Entrance side : Sectional door, 3.5 m x 4.0 m (approx. WxH) Escape door : 2 pieces, 0.8 m x 2.1 m (approx. WxH) 1 piece, 1.0 m x 2.1 m (approx. WxH) Rusting : All-field rusting Heating : Hot water heat exchanger 250 kW Energy saving : Heat exchanger Supply air unit : 45,000 m3/h; 2 x 7.5 kW motor Exhaust air unit : 45,000 m3/h; 2 x 7.5 kW motor Dry temperature : 60 degrees C Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet Location : Room Ulm Retail price : each € 15.900,- net, ex location incl. disassembly

pressure: 125 t throat: 300 mm stroke: 10 - 135 mm no. of strokes: 50 Hub/min dayligth: 315 mm distance table - lower edge of ram: 450 mm ram adjustment: 60 mm table-size: 600 x 900 mm ram head dimension: 315 x 550 mm work height max.: 800 mm table hole: 250 mm ram hole: 50 mm total power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,65 x 1,68 x 2,87 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. Thi ...

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,650 t diameter of piston: 180 mm working feed: 2 mm/sec return speed: 20 mm/sec pressure capacity max.: 200 bar toolpiece height min.: 200 mm dimensions of the machine ca.: 1150 x 750 x 1103 mm This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can b ...

USED NX418 DECANTER REF.: C2858 NX 418 RECONDITIONED DECANTER. Carbon steel platform, with 4-leg fixings for ground anchoring. Carbon steel frame, fixed by silemtblock to the platform. Side engine support with belt tension plate. Anchorage of main bearings. Stainless steel bowl in conical trunk shape, in three removable pieces. screw solid discharge built in stainless steel troco-conical shape with contribution of crest tostene and wing advance. Stainless steel top enclosure with three rear hinges for easy opening, screw closure. Feeding tube built in stainless steel Cam type cycle reducer. Main engine at a speed. Power from 18Kw to 3000 Rpm 400V / 50 Hz Properly oversized bearings installed according to manufacturer's standard. Rolling unit driven by 6 V-belts. Save integral protection straps. General characteristics: Model NX418 Weight 1600 kg

pressure: 60 t throat: 235 mm stroke: 10 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 50 mm table-size: 470 x 700 mm ram head dimension: 310 x 410 mm work height max.: 670 mm table hole: 190 mm ram hole: 40 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,23 x 1,46 x 2,35 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This  ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 25 to Total stroke: 150 mm Execution: 4 columns Table surface: Length: 450 mm Width: 400 mm Slide diameter: 120 mm slide bore diameter: 38 mm Distance from table to slide-nose: min.: 120 mm max: 270 mm Passage between columns: longitudinal: 500 mm Lateral: 200 mm Voltage 50 Hz 3x: 380 Volt Total power required: 10.20 HP Machine´s weight about: 1750 kg Overall dimensions machine: Length: 1500 mm Width: 1100 mm Height: 2700 mm Various accessories: Security/savety device Foot pedal

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 6044 Technical data Pressure: 40 to Pressure: 400 kN Pressure: 260 bar Total stroke: 300 mm Execution: 4 columns Table surface: Length: 650 mm Width: 650 mm Min. stroke: 33 mm/s Max. stroke: 120 mm/s up: 450 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Motor power: 15 kW Machine´s weight about: 5200 kg Overall dimensions machine: Length: 1750 mm Width: 1200 mm Height: 3500 mm Various accessories: Security/savety device Ziehkissen pneumatisch: number (steps): 2 Force du cylindre: 30 kN Total stroke: 100 mm

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

CP30 PRESS FOR CANS AND OIL FILTERS With its compact design and a pressing force of 8 tons, the CP30 efficiently presses metal cans and large oil filters up to a size of 30 liters. Recommended for car repair shops, paint shops and food manufacturers. Pressing force of 8 tons Low voltage control and emergency stop knob for safe working Easy removal of cans after pressing and drip tray for residual liquid SPECIFICATIONS Dimensions with stand: 2540 mm H × 1105 mm W × 680 mm D Dimensions without stand: 1435 mm H × 615 mm W × 680 mm D Dimensions of the pressing chamber: 475 mm H × 350 mm W × 350 mm D Weight: 245 kg Pressing time: 35 seconds Pressing force: up to 8 tons Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels IP54 protection class CE Certification Made in EU OPTIONS Savings model Suitable for use at sea Galvanized or stainl ...

Rotary milling machine.Auto copy shaping machine with profile sander LH-100-4PS This equipment can be applied on first rough copy-shapings. No matter they are round, oval, rectangle or irregular profiles, all can be roughly copied and shaped out at one time. It can save much time if using band saw for first rough cuttings. Technical specifications: Max shaping capacity- 2250mm x 1100mm Disc dia -1800 mm Round disc revolving speed-0,5-3 RPM Main spindle revolving speed-9000 RPM Main spindle dia -30 mm Shaping cutter dia-100 mm Driven wheel dia -100 mm Round disc driving power-3 HP Main spindle driving power-10 HP x 2 Sander power-3 HP x 2

The machine is used for packing loose products into 5-60 kg bags. It can be used for packing granules, pellets salt, fertilizers, eco-pea coal and many different. NEW bag packing machine + air compressor The machine is simple and reliable Capacity about 300 bags / h Upgrade, while the bag drops, the machine weighs another in before putting the bag on. This saves a lot of time and improves efficiency. I can help to organize transport to your place. Machine is in Poland Price 5 900 EUR

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1600 kN Total stroke: 300 mm Execution: 4 columns Table surface: Length: 1000 mm Width: 850 mm Return power: 119 kN Depth of throat Passage between columns: longitudinal: 645 mm Lateral: 405 mm Slide clamping surface: Width: 1000 mm depth: 850 mm Close traverse speeds: Rapid traverse: 400 mm/s Press stroke: 10 - 60 mm/s Return traverse speeds: 400 mm/s Oil quantity: 350 l Voltage 50 Hz 3x: 380 Volt Motor power: 45 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 2100 mm Width: 1200 mm Height: 3900 mm Various accessories: Security/savety device: SICK Roll-feed Useful cylinder length: 250 mm Decoiler: Manufacturer: DREHER 2380DM 400 mm Straithening device: DREHER 400 x 4 mm

SALE ONLY COMPLETELY! NO RETAIL SALE! ALSO APPLIES TO WMF MACHINES. THEREFORE SAVE YOURSELF THE CALLS, HOW MUCH DO YOU WANT ONLY FOR THE WMF ETC... Coffee machine - Espresso machines 2x WMF Cafemat 5x Wmf Presto 2x WMF 1000S 11x Thermoplan Tiger (1x WMF 1000 S I kept to myself and is now in my office) in total there are 20 coffee machines A few machines are defective. or a few parts are missing. A box full of parts for the WMF is available. The machines are sold without warranty and guarantee, in net.

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Automatic feed: number: 1 Execution: rolls Electro-pneumatic clutch Security/savety device

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm

pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...

The YC2500HR Large Format Printer was manufactured by the Chinese company Linyi Win-Win Machinery Co., Ltd. in 2019. The digital printer provides the highest print quality thanks to the LED UV curing system and eight 6th generation Ricoh print heads with CMYK + 2x WHITE + 2x VARNISH configuration. The machine allows you to print at a speed of 30 m2 / hour on items such as: ceramics, PVC plates, corrugated cardboard or plastic. The maximum width of printing on an object is 2500 mm. The plotter is equipped with RIP ONYX Software, Panasonic servo motor and TAIWAN HIWIN linear motor. Technical data of the YC2500HR large format printer - type of carrier: PVC, metal plates, glass, wooden boards, acrylic, ceramics, wallpaper, corrugated cardboard, plastic - RIP software: ONYX Software - print heads: 6th generation Ricoh - number of print heads: 8 - configuration of heads: CMYK + 2x WH ...

Unit set for paint booth with speed control and heat recovery: Make : Wolf, Type 4/B-M Year of construction 2009 Dimensions : 1.5 m x 4.2 m x 3.0 m (approx. WxLxH) Heating unit : 209 kW Burners : oil burners, Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1,500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Energy saving : Speed control with frequency converter and heat recovery Pipelines : Supply and exhaust air pipes, deflector hood, air intake hood Electrics : Control cabinet Location : Nuremberg Area Retail price : € 11.900,-, net, ex location

Baguett - Dough divider JAC Tradiform - Dough weight from 150g to 950g (option 300-1900g) - 19 kg capacity (460 x 387 x 125 mm WxDxH) - Stainless steel version - Dough division and shaping - Easylock automatic snap-in of the grid holder - Modular solution thanks to partial and moulded grids - Space-saving - fast and efficient with Easy Clean - versatile use - 100 different grids are offered - Basic equipment 1 cutting grid - up to 900 dough pieces per hour are divided and 3000 shaped Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 772 x 924/1756 mm, WxDxH New machine with 12 months warranty

Bucket elevator for bread plant KemperManufacturer : KemperType : BE11Possible applications in all dough processing linesTransporting even soft doughSpace-saving designoptionally 1 or 2 pieces of doughCross belt Counterclockwise / Crossbelt Clockwise rotationBaker conditionDetails see picture

Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Circulary table diameter: 220 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 400 Volt Power: 0.75 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Security/savety device Lamp Sound insulation cabin

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales

The new DYNAJET surface cleaning system DFS 500 VAC: With 500 bar and integrated Extraction according to the Venturi principle, the DFS 500 VAC is the ideal tool for fast and efficient cleaning of large areas such as.B. industrial and hall floors, building Forecourts or courtyard entrances. The suction according to the Venturi principle, in which an additional jet of water creates a Negative pressure is generated, which tears the dirty water with it, makes an additional Wet vacuum cleaner with separately required power supply superfluous. Efficient and powerful: Hot water version up to 95° C. Connection for sewage hose on the integrated extraction system. Nozzle carrier for accommodating two high-performance nozzles Form D for maximum cleaning performance. Stepless adjustment between cleaning and extraction capacity Mobile and robust: Three steerable wheels for super s ...

Lock forming machine LFM Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process  ...

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...

Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Electro-pneumatic clutch Security/savety device