sav used for sale

This APV Gaulin MC 45 homogeniser is a 3-cylinder machine which is designed for 20.000 liter per hour with a maximum pressure of 172 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on the inlet and manometer on the stages. Piston diameter: 76 mm. Motor: 90 kW - 380 V - 172 Amp - 50 Hz - 1485 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressure and thus distribute them evenly  ...

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

This APV Gaulin MC120 homogeniser is a 5-cylinder machine which is designed for 25.000 liter per hour with a maximum pressure of 210 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on both stages. Piston diameter: 70 mm. Motor: 160 kW - 380 V - 281 Amp - 50 Hz - 1483 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available. Note: the head is cracked, needs to be repaired / renewed., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressur ...

Used ozone water disinfection equipment The ozone water disinfection equipment produced by UNIVERSAL AQUA in 2009 represents an advanced solution for the treatment of water In facts it is used in production processes particularly in the bottling industry This equipment is capable of delivering a capacity of 5 000 liters per hour making it indeed ideal for medium sized systems The unit is carefully designed to ensure optimal efficiency in generating and infusing ozone into the water Ozone is a powerful oxidizing agent that acts effectively in water disinfection especially eliminating bacteria viruses and microbiological contaminants Components and operation This equipment consists above all of a high quality ozone generator a system for mixing ozone with process water and an advanced control system The ozone generator is designed to produce ozone reliably and continuously consequently ens ...

Used Filling Line For Pet Bottles YOM 2001 Sipa blower equipment is in working condition still running till the end of the year These Used Filling Line For Pet Bottles are in good working condition It is possible to see all the machines in operation by the end of 2022 1 Sipa blower equipment type SF 8 4 893 year of manufacturing 2001 capacity 2L 4 000 bottles h inclusive Preform silo elevator and sorting unit inclusive in this Used Filling Line For Pet Bottles Industrial Frigo chiller Model GR2A 40 2004 2 Air conveyor system from outlet Sipa blower equipment machine to the inlet of the Radenska triblock The air conveyor system is pneumatically adjustable 14m Filling part of the line 3 Tribloc Radenska 24 48 5 Type T48 48 RP 24 N05 with 24 rinsing stations 48 filling valves and 5 capping for plastic screw caps year of manufacturing 1993 4 Complete bottle conveyor system 5 Foil shrinking m ...

Enoberg Bottle Filling Monoblock for still water This used Bottle Filling Monoblock model EVF 24 24 6 N S comes with an integrated rinsing filling and capping system and consists of A rotary rinser with 24 nozzles for the rinsing of bottles A rotary filler with 24 valves for the electronic volumetric filling A capper with 6 heads for the application of plastic screw caps or pressure caps Monoblock Bottling with a machine pitch of 150 72 mm Counterclockwise machine Neck Handling bottle conveying system Key features The Enoberg Filling Monoblock for still water distinguishes itself with its compact frame which considerably simplifies operations to manage clean and maintain the machine and ensures substantial savings on space Filling module equipped with electronic meters to ensure precision The working space of the machine is entirely made of stainless steel and glass ensuring a high stand ...

Used Robot Palletizer Fanuc 2003 The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations Look no further than the 2003 Fanuc Robot Palletizer model M 410 iB 160 Equipped with a pick up head for cardboard and available base this palletizer is designed specifically for palletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can develop pallets up to a height of almost 3 meters The integrated base and controller in the pedestal or the available non pedestal version saves floor space an ...

Used Robot Depalletizer Fanuc 2003 The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations Look no further than the 2003 Fanuc Robot Depalletizer model M 410 iB 160 Equipped with a pick up head for cardboard and an available base this depalletizer is designed specifically for depalletizing tasks With its intelligent cable routing inside the hollow wrist high operating speeds and high inertia and wrist moments this machine can handle large grippers and heavy payloads with ease Its 6 axis control servo gripper provides better adaptability in handling products of different sizes Operating within an optimized workspace and with high vertical travel this robot can depalletize products up to a height of almost 2 7 meters The integrated base and controller in the pedestal or the available non pedestal versio ...

Used Handle Applicator Twinpack 1994 Are you searching for a reliable handle applicator to streamline your packaging process Look no further than the Twin Pack 1994 model With its impeccable performance and impressive specifications this handle applicator is a game changer for your packaging needs Key Features Used Handle Applicator Twinpack 1 Year of Manufacture 1994 2 Speed Achieve a remarkable speed of 35 bundles per hour ensuring optimal productivity 3 Tracks Equipped with a single track simplifying your packaging workflow 4 Operator Convenience Designed with the operator in mind the applicator features a left sided operator position for seamless control 5 Safety First The handle applicator is integrated with essential safety features to ensure a secure operating environment 6 Manuals Included Benefit from comprehensive manuals that facilitate easy setup and operation Performance You ...

Used Automatic Microfiltration Plant Sifa 2011 Are you in need of a reliable and efficient microfiltration system for wine and water filtration Look no further than the Sifa Automatic Microfiltration Plant With its exceptional performance and advanced features this plant offers optimal filtration results making it the perfect choice for your filtration needs High quality Microfiltration Solution by Sifa for Optimal Filtration Results One of the key highlights of the Sifa Microfiltration Plant is its ability to deliver high quality filtration Equipped with three chambers specifically designed for wine microfiltration and two chambers for water microfiltration This plant ensures the removal of impurities and particles resulting in superior filtration outcomes Advanced Features and Automation for Seamless Operation and Control Thanks to its advanced automation system the Sifa Microfiltratio ...

5 Sormac peelers available, available Q2 2024, Onion peeler USM-S100, The Sormac onion peeler USM-S100 combines easy operator use with a good reliability. The operator has within reach a rotating, mounted display panel with all the important functions at there disposal. Also shown is important information like capacity, number of peeled onions, operating hours and malfunction identification.By means of a singulating chain the onions are transported from the infeed hopper and positioned onto the flights of the transport chain. The operator places the onions in the right horizontal position. The rotating knives top, tail and cutting arms make a horizontal cut around the onions., At the end of the conveying section the onions are picked up with a double holding-arm system with rotating holders., This arm is fitted on a rotating structure. During the rotating movement the onion spins around  ...

Number of spindles: 6 St. Working width: 250 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6 bis 24 m/min. Dimensions (L/W/H): 4800x1900x2150 mm weight of the machine ca.: 5400 kg Control: powerControl HOMAG Moldteq M-300 (OPTIMAT LPP-306) -------------------------------------- Four-sided planer in window version with electronic axial and radial adjustment of the spindles. Advantages: -------------------------------------- - Flexibility thanks to variable feed and adjustable spindle speed - Intuitive machine operation via powerTouch2 - Quick setup using proLock spindle clamping - High precision thanks to solid cast iron stand - Ideal power transmission as each spindle has its own motor is driven Technical data short version -------------------------------------- Number of spindles: 6 Working width: 250 mm Working height: 160 mm Dressing table ...

ROLL DIAMETER 400mm POLL WORKING LENGTH 1000mm MOTOR POWER 45 KW DIMENSIONS: 447118501760 (L×W×H) SPEED RATIO OF ROLLS 1:1,27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped wit ...

DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One machine does the job with great saving!, It can handle very heavy parts without need of pre-shredding, installed power : 75, HIGHLIGHTS: HEAVY DUTY MACHINE

General SKU212T501 LocationBarneveld MakeBarriquand TypeIXAP 5+4/8x1 x 1000 x 160 No.213712 B Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface1.9 m2 Size length1000 mm Sizes width160 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface1,9 m² CapacityCircuit A (water): 5 Ltr, Circuit B (product): 20 Ltr. Number of platens9 ConnectionsDN25 (4x) Max. temperature-10/200 °C Information Mounted on legscheck Weight350 Kg Floorspace1,25x0,4 m Total height1 m Extra SpecificationsThe Barriquand IXAP 5+4/8x1 x 1000 x 160 is a versatile plate heat exchanger designed to facilitate efficient heat transfer across various applications. It operates through two distinct circuits, A and B, each catering to specific needs. Circuit ...

TECHNICAL DATA Net weight: Kg 1330 Length: mm 2400 Width: mm 1550 Height: mm 1870 Voltage: Volt 230/400 Power: Kw 4 Frequency: Hz 50 PRODUCTION CHARACTERISTICS Production up to 48.000 vials/h Min. height vial: 20 mm Max. height vial: 140 mm Min. diameter vial: 7,5 mm Max. diameter vial: 36 mm Pressure: 2 bar The ESA series labelers apply self-adhesive labels from the reel to bottles and vials, cartridges and other unstable containers. All electrical, electronic and PLC components are integrated into the machines to save space. These continuous motion labellers have an extremely compact design. The label dispenser has a modular design and can be equipped with both intermittent motion and continuous motion printing systems. For added convenience and reliability, the functionality of the label dispenser can be enhanced by a number of additional controllers and wor ...

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

The pass-through dryer is operational, the fans have been replaced with energy-saving ones.

Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler DIGI AW-5600e AT POP The AW-5600 AT is a high-performance automatic weighing, packaging and labeling system for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It saves film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and in a visually appealing way. Technical specifications Wrapper DIGI AW-5600e AT POP 220-240V / 50-60 Hz / 2.2 kW suitable for Food-Tainer bowls Capacity up to 36 packets/min Film width: 300 - 450 mm Year of construction: 2017 Total weight approx. 450 kg DIGI award system 3 built-in printers for product labels and promotional labels  ...

dual-function machine for polishing and grinding - SIEMENS PLC controlled machine with touch display. - ability to create and save your own programs - 9 heads - Rotatable display - high performance, ease of use - POLISHING function - GRINDING function - DTR documentation

Description: serial number: 4987 max.working pressure: 8 bars rated power: 3 kW air flow: 400 l/m working hours: approx. 2952 hrs. in total working hours under load: approx. 2143 hrs. time left to regular maintenance: approx. 3000 hrs. Kaeser Equipment RFID card  , please also have a look at the video of this compressor Energy-saving performance The efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life. With compressors, energy costs account for the lion’s share of total expenditure. KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. Refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors. The addition of the SIGMA CONTROL 2 internal  ...

A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: STEEL, STAINLESS STEEL, BRASS, ALUMINIUM Condition: USED - 16 000h Laser Type: Fiber Laser Laser Power: 15 ...

Spectrometer for scientific use QEPRO-CUSTOM#HC-1 Characteristics:  Dimensions: about 182mm x 110mm x 47mm, weight about 1,18Kg;  Hamamatsu detector S7031-1006 2D 1044 x 64 pixels;  Integration time: from 8ms to 60min;  Maximum quantum efficiency: 90% , quantum efficiency at 250nm: 65% ;  Signal-to-noise ratio: 1000:1;  HC-1 composite diffraction grating, suitable for the range 200-1100 nm; Slit width: 25µm;  Interchangeable slits (not included), available in 5, 10, 50, 100 and 200μm;  Resolution (FWHM): about 2.0 nm with 25μm slit;  Thermoelectric cooling;  Direct interface with PC via USB;  Standard SMA 905 fiber optic connector. 2. Interchangeable slits cod. SLIT-XX Available in sizes 5, 10, 25, 50, 100, 200 μm. 3. Operating software cod. OCEANVIEW Characteristics:  Includes the necessary drivers for spectrometer control; ...

Complete signmaking equipment Made in USA for fast producing channel letters! For EU customers we provide FREE SHIPPING to your door! The machines are in operating condition, ready to use. 1. Multifunction Automatic CNC Metal Channel Letter Bending Machine (Flange & Notch functions) CNC metal channel letter bender capable for fully automatic channel letter fabrication, whereby producing cuts, bottom notched flange and bending of channel letters returns. It is capable to make aluminium channel letters with trim cap. We can provide well written manual in English and training on our premises if asked. 2. Norlok Letterlok 4000 Automatic Clincher Machines for Aluminium Channel Letters Norlok Letterlok 4000 Clincher is particularly designed for fastening the letter returns and letter backs. It uses newest technique power to connect metals without drilling, spot welding and  ...

New KRAASS WC67K-100Tx3200 CNC press brake for sale, ESTUN E300 control. Technical specifications: -press force: 100T, -bending length: 3200mm, -distance between columns: 2600mm, -Maximum opening height: 320 mm -weight: 6800kg, -engine: Siemiens 7.5kW, - hydraulic system: Bosch Rexroth, -electronics: Schneider, -bumpers move with HIWIN linear guides, - stamp mounting system: quick assembly of the AMADA type, Estun E300 CNC control: -automatic calculation of bending functions, - bending sequences and programs can be saved - X and Y axes controlled by servo drives, - the controller can predict and prevent collisions, -possibility to introduce 30 different stamps and dies to the library, - the ability to set the angle correction, - algorithms that shorten the production process, Additional equipment: Light curtains or photocells that prevent the hand from being pl ...

Illumina MiSeq uses sequencing by synthesis (SBS) technology: cluster generation+ sequencing+ data analysis in a very short time. Key features - Automation: Miseq includes a buffer bottle, flow cell and reagent cartridge, designed to enable both cluster generation and sequencing with unrivalled efficiency. - Time-saving: integrated Real Time Analysis (RTA) software analyzes data on the instrument in real time, saving valuable analysis time. - Applications: Whole genome sequencing (WGS), exome sequencing (WES), specific sequencing of gene panels of interest, sequencing and assembly of new genomes, mitochondrial sequencing, epigenetics, metagenomics .../... Functional device shut down in Dec. 2022 - Last Illumina preventive maintenance performed in October 2022. Dimensions in cm : 52.3x68.6x56.5 Weight in kg : 57.2 Power supply: 100 to 240 V AC at 50/60Hz, 10A, 400W NRTL IE ...

Illumina MISEQ SY-410-1003 Last maintenance October 2022 done by Illumina Price is negotiable Illuminas MiSeq uses sequencing by synthesis (SBS) technology: cluster generation+ sequencing+ data analysis in a very short time. Key features: - Automation: Miseq includes a buffer bottle, flow cell and reagent cartridge, enabling both cluster generation and sequencing with unrivalled efficiency. - Time-saving: integrated Real Time Analysis (RTA) software analyzes data in real time during sequencing, saving valuable analysis time. - Applications: Whole genome sequencing (WGS), Exome sequencing (WES), specific sequencing of gene panels of interest, Sequencing and assembly of new genomes, Mitochondrial sequencing, Epigenetics, Metagenomics .../... Fully functional machine to be disconnected in Dec. 2022 Last preventive maintenance by Illumina in October 2022. Dimensions in ...

Description: Ventilated benchtop centrifuge Mega Star 600, brand VWR Condition: Excellent, Year of purchase: End 2018. Price Characteristics: Benchtop centrifuge ideal for a wide range of applications such as the research in the pharmaceutical and biotechnology industry and research university. Auto-Lock 3 rotor locking system: Rotor change without tools at the touch of a button; users can quickly change the rotors and easy access to the rotor chamber for cleaning. ClickSeal aerosol-tight bucket sealing system: user-friendly one-handed gloved opening/closing, no need for screw caps or complex clips. SMARTSpin technology optimises acceleration, residual braking and residual load imbalance for maximum safety, regular analysis and reproducible separations. The pulse function saves time for short analyses. Intuitive controls and a large, bright LED display make operation easy. and  ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 t total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5x4x3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program Milling in single-part process - Sw ...

Used Labeling Machine Cimec Cold Glue Up to 4000 BPH Year 2020 In the industrial bottling sector choosing the right labeling machine is crucial for ensuring efficiency and quality The machine stands out for its precision and reliability Technical Features of the Labeling Machine Cimec Produced in 2020 this second hand Cimec labeling machine model ETC COLLA LN is designed for speeds up to 4000 bottles per hour BPH This reflects the unit s high productivity The formats that this labeler has worked are 0 33l 0 25l and 0 70l Furthermore its linear rotation direction combined with the cold glue labeling method ensures precise and uniform label application Indeed this is essential for maintaining high visual quality of the finished product Adjustments and Safety Despite the absence of automatic head adjustment the machine allows manual label adjustment Therefore it offers flexibility in produc ...

GUILLOTINE REEL SLITTER, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety conditions: 2-hands operation ...

Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder - a set of heads included in the price planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW four upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242  ...

- Exhibition machine - special model eligible for subsidies, with energy-saving motor IE4, pre-separator integrated, automatic extinguishing integrated ---------- Technical Data ---------- Extraction nozzle : 250 mm, Nominal volume flow: 3,534 m³/h, Max. volume flow: 4,900 m³/h, max. vacuum: 3,184 Pa, Filter area: 22.4 m², Chip collection volume: 2 x 250 litres, Number of bags: 2 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - 07 new exhibition machine

Borche BS150-III injection molding machine Year of production - 2015 Injection components: Screw diameter: 45 mm Injection Weight: 321g Injection pressure: 1850 bar Injection volume: 341cc Closure elements: Closing force: 150 t Clearance between columns: 460×460 mm Maximum table plate dimensions: 670×670 mm Ejector: hydraulic Closure system: knee Hybrid machine: energy-saving, high-speed, very quiet Euromap 67 robot interface air valve x 1 Hydraulic core string x 2 Central lubrication system The main motor - a servomotor controlled by an inverter It is possible to buy a Shini robot Dimensions: Weight: 4300 kg Length/Width/Height: 4.85×1.42×1.64 m Power: Pump/Motor: 15 kW Heaters: 9.6 kW Total: 24.6 kW

Arburg 570C 2200-1300 Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m Additional equipment: Hybrid machine: fast, energy-saving Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Main motor of the machine - servo motor driven by inverter - energy saving

Doypack packaging line with batch marker and weight controller S.T.E. Description Horizontal packaging machine to make a Doypack bag starting from the coil. It is a packaging machine that also allows you to apply a zipper to the bag. Ideal for clients who have a high production in Doypack bags and who want to save costs making the bags in Doypack format starting from the film reel. It has a weight controller at the end of the packaging machine, as well as a coding device for marking the batch and a labeling machine for the bag. Features Model: HY-4-S Year: 1999

Packing machine with bottom foil feeder - 3 servo motors and a printer. Machine Specification: Type: 350X Film width: max. 350mm Package length: 90 - 600 mm Package width: 30 - 160 mm Product height: max. 70mm Foil roll diameter: max. 320mm Packing capacity: 30 - 120 packages/min. Film location: lower film feeder Packing materials: OPP, OPP/CPP, KOP/CPP, ALU-FILM Controls: TOUCH SCREEN touch panel Type of drive: 3 x servo motors Photoelectric sensor: Yes (work with printed foil) Power: 220V, 50/60 Hz, 2.4 KW Machine size: LxWxH - (L)3836 x (W)890 X (H) 1079mm machine weight: 350 kg An advanced high-speed product packaging machine (with bottom foil feeding) is suitable for food products (e.g. chocolates, bread, fingers, sandwiches, vegetables such as celery, dill, greens) and industrial products (e.g. packing masks, sockets / electrical switches, etc.). Packing l ...

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

Container washer, crates, clean zone + receiving hopper. Year of production 2016. Manufacturers designation: MP-300/1 container washer Efficiency: up to 300 containers per hour The MP-300 washer can also wash ham molds, molds and baking sheets Washing liquid heating systems: electric Regulation and distribution of rinsing water in terms of: rinsing intensity, water refreshment in the tank and/or overflow A system that allows you to save water in the device in the event of a temporary lack of a container in the tunnel System for measuring the concentration and dosing of detergent They include: Satellites with dosing nozzles - 11 pieces, manufactured by ECOLAB. Base device controlling satellites/zones. Possibility to program concentrations and dosing times. Intended for alkaline and acidic chemistry. Stainless steel structure and tank.

Washer Containers crates Dirty zone Producer: Nowicki Year of production 2010. Manufacturers designation: MP-300 container washer Efficiency: up to 300 containers per hour The MP-300 washer can also wash ham molds, molds and baking sheets Washing liquid heating systems: electric Regulation and distribution of rinsing water in terms of: rinsing intensity, water refreshment in the tank and/or overflow A system that allows you to save water in the device in the event of a temporary lack of a container in the tunnel System for measuring the concentration and dosing of detergent Possibility to program concentrations Intended for both alkaline and acidic chemistry. Stainless steel structure and tank.

Belt press POWERPRESS 400 is designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders + Fruit and Vegetable Washer Elevator Mill MAXIMILL 1000. # Pour jus de pomme, jus de raison, jus dorange, jus de poire, jus dananas, etc. The obtained juice flows in the collection tray under the press. The pressing process is continuous. Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. Bel ...

1.8 kg coffee roaster Equipped with the Artisan smoking process control system with Siemens PLC screen and touch screen. 4 motors to save time and energy with uniform roasting and cooling of the grain. Made of high-quality, high-temperature-resistant raw materials. The ability to adjust the flame allows you to get the same grain profile every time. Compatible with the Artisan and Cropster systems. Uniform heat distribution system in the drum Adjustable drum rotation (from 30 to 70 per minute) The optimal thermal insulation of the drum ensures effective use of heat Volumetric airflow control

Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.

Very beautiful JOPER coffee roaster with roasting profiler Year of manufacture: 2013 Condition: Very good (Was used only for micro lots) Hand crafted in portugal Usefull capacity per batch: 5kg Minimum batch size: 2.5kg Front and back lid made of cast iron Roasting and cooling at the same time 4 motors for the drum, the cooling tray arm, the cooling fan and the drum airflow Double wall drum Very well insulated roaster for increased quietness and energy efficiency Profile roasting system controlled by PLC, touch screen or computer. You can save roasting profiles and reproduce them later automatically. 2 thermocouples for bean and air temperature Artisan & Cropster connection Chaff collector included Adjustable Low Nox atmospheric LPG gas burner Power: 220V/50Hz Dimensions:2075 x 1160 x 2090H Weight: 450Kg Possibility to buy a destoner separately for 2000 ...

CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. Pitch: 1xBohrkopf mm Working width: 3300 mm Boring depth max.: 80 mm Workpiece thickness: 150 mm Motor output: 0,5 kW STEGHERR - Dowel drilling machine type FD/E ------------------------------------- for the efficient dowelling of crossbars and slats, rungs and Door elements. The window and door dowel drilling machine is an extended FD and is equipped with a freely programmable PC control with a floppy disk drive and 14 screen equipped. Up to 1000 drilling patterns with 10 holes each can be saved and accessed via code numbers. Specially designed for window and Software developed by door manufacturers guarantees high cost-effectiveness and extreme precision. Part of this machine is a pre-built STEGHERR-NC STOP positioning device that positions the workpiece with an accuracy of +/- 1/ 10 mm in front of th ...

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

With this rotator, the workpiece can be fixed and rotated in the correct position without a crane. By using the traditional positioning can be replaced. Occupational safety and treatment are optimized and cycle times are reduced. In the best case, the time requirement can be reduced by up to 20%! Includes wired remote control and foot pedal. The device has a master-slave function, which allows several driven units to be synchronized with each other. This can be important if later the capacity should be increased. When not in use, you can simply put the device in the corner and save space. The device is easy to transport to external workstations.

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. sliding table saw FORMAT4 Kappa 400 x-motion S/n 605.09.011.16 Year of construction 2016 Manufacturer: Felder Austria Cutting length 2800mm X-Roll sliding table ( 10 years warranty ) Cutting width 1200mm Boom table 1500 mm with cut-to-length fence 3200 mm Cut-to-length fence 3200 mm, swivel 90°–45°, 2 stop jaws Control x-motion CNC engine control with LCD screen 5.7" (145 mm) in overhead control panel Positioning control for saw blade height Positioning control for saw blade angles Automatic cutting height correction when panning Circular saw blade speed indicator Positioning control for rip fence w ...

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...