134,865 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/sec total power requirement: 3 kW weight of the machine ca.: 0,105 t dimensions of the machine ca.: 1,2 x 0,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinChip removalChip removal: manual, from the chip troughCoolant supplyCoolant supply: Multi-jet strip at spindle head, switchable from coolant to air (max. 6 bar / 90 psi, 6 water jets, 6 air jets) Pump capacity: 70 l/min / 18 gallon/min (theoretical pump performanc ...
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 780 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 x 0,00 ...
width of the strips: 25 mm band length: 762 mm dimensions of grinding wheel: 125 mm Table tiltable up to: 45 Grad table surface area: 130 x 130 mm connected load frequency: 230 V total power requirement: 0,3 kW weight of the machine ca.: 9 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.
: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.
width of the strips: 100 mm band length: 1220 mm band speed: 1140 m/min. : 0,62 x 0,4 x 0,35 cm total power requirement: 1,5 kW weight of the machine ca.: 0,04 t dimensions: 0,97 x 0,67 x 0,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 500 mm z-travel: mm Control: Heidenhain tool taper: SK 40 : 13,5 kw turning speeds: 3150 U/min total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.
Ingersoll F55 Horizontal Gantry Milling Machine Manufacturer: Ingersoll Type: Gantry / Portal Milling Machine Control: Conventional Year of Manufacture: 1978 Retrofit: 2008 Main Specifications: Spindle motor power: 55 kW Longitudinal X-axis travel: 11,470 mm Transversal Y-axis travel: 2,500 mm Ram vertical W-axis stroke: 700 mm Crossbeam vertical Z-axis stroke: 2,000 mm Table dimensions: 10,750 × 2,000 mm Maximum table load capacity: 200 tons Maximum spindle speed: 6,000 rpm Feed rates: X-axis: 2,500 mm/min Y-axis: 2,000 mm/min Ram vertical feed: 900 mm/min Tool change: Manual The machine is suitable for machining large and heavy components for industries such as power generation, heavy machinery, shipbuilding, and general engineering.
turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 125 x 34 mm -Clamping depth: 98 mm -Dimensions: 365/125/H70 mm -Weight: 15.7 kg
Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg
x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
custome made napkin making machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
CNC lathe Gildemeister Twin 42 RG2 Year of Make: 2004 Control Siemens 840D Powerline Turning diameter 145 mm Max. bar passage 45 mm Spindle Head Flat Flange 120 h5 Chuck 130 / 140 mm Main spindle speed 20–7,000 min⁻¹ Main spindle power 28 / 22 kW (40/100 % ED) Torque main spindle 180 / 140 Nm Sub-spindle Yes, same performance X-axis 220 mm Z-axis 320 mm Y-axis ±30 mm Rapid traverse X/Y/Z 30 / 15 / 30 m/min Turret 2 × 12 stations Tool holder VDI 25 Machine weight approx. 5,300 kg Connected load approx. 40 kVA Type 60° inclined bed, linear guides Chip conveyor Bürener type SPE 63/30- 250 Z60 Tool monitoring system Artis type CTM Tailstock mounted on sub-spindle carriage, tailstock stroke = 230mm Tailstock force = 300 daN Centrifuge MK3 Overload clutch for the X and Z axes of slides 1 and 2 Bar machining package consisting of: Workpiece collection device ...
cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 85 mm cross-section heigth:: 25 - 40 mm feed:: 1 - 999,999,9 mm speed of feed:: 60 m/min cuts max.:: 100 - 120 Schnitte/m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: ...
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.
Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.
: 0 bore depth: 10000 mm number of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mm swing diameter over bed slide: 1600 mm boring diameter: 50 - 310 mm centre height: 800 mm speeds:: 2,5 - 400 total power requirement: 74 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.
This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2013. This Leadwell T-7 features a maximum turning diameter of 350 mm and a maximum turning length of 540 mm. It includes a 12-station hydraulic turret and a spindle speed of 1,750 rpm. If you are looking to get high-quality turning capabilities, consider the Leadwell T-7 machine we have for sale. Contact us for further details.
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal turning machine manufactured in 2008. This Okuma ES-L10II features a maximum turning diameter of 390 mm and a maximum turning length of 500 mm. It is equipped with a 10 chuck and a robust Okuma MQ Turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma ES-L10II machine we have for sale. Contact us for further details regarding this machine.
Horizontal universal balancing machine manufactured in 2004. This SCHENCK HM 70U BU features a maximum workpiece weight of 50,000 kg and a maximum workpiece length of 15,000 mm. It includes a control unit with CAB 920 software and a total power requirement of 75 kW. If you are looking to get high-quality balancing capabilities, consider the SCHENCK HM 70U BU machine we have for sale. Contact us for further details.
CNC lathe DMG MORI NLX 2500 SY/700 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of manufacture: 10/2017 Commissioning: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 4500 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Workpiece Conveyors , Workpiece Unloaders Tool presetter manual ( HS ) Removable tool presetter ( GS ) 3 Jaw Chuck Hydraulic Kitagawa BB 210 with Foot Pedal (HS) 3 jaw chuck hydraulic Kitagawa B 208 with foot pedal (GS) IRCO BREUNING ILS Bar Feeder - muk Various tool holders 0 40 mm Direct displacement measuring system X, Y, Z axis Signal lamp 4 ...
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,450 t dimensions of the machine ca.: 3830 x 1160 x 1180 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tube cutting machine manufactured in 2024. This Bodor T2-65-3000W features advanced technology for efficient cutting operations. If you are looking to get high-quality tube cutting capabilities, consider the Bodor T2-65-3000W machine we have for sale. Contact us for further details.
1 fully automatic cup filling and capping system for filling Mozzarella balls and mozzarella slices Brand: GRUNWALD Type: ROTARY 12,000E/1-/2-lane Year of construction: 2019 / 2020 Filling Temperature: Cold Filling Cup formats: A) Round plastic container with handle and grass collector, Ø 175 x H = 131 mm B) Round plastic cup, approx. 104 x H 55 or 65 mm C) Round plastic container with handle and collection basket, 227 x H 194 mm Lid: A+C) Plastic slip-on lid (tamper-proof closure) B) Pre-punched plastic blanks + slip-on lids. Machine description: The GRUNWALD-ROTARY 12.000 is clearly and functionally designed and solidly built. All drives are protected and easily accessible in the machine frame. The GRUNWALD-ROTARY is equipped with servo motors to drive the following functions: Features: - Turntable with servo drive - Suction of the cup - Insertion of the pr ...
Manufacturer ZAYER Model MEMPHIS 10.000-U Month/ Year Manufactured 2002 CNC HEIDENHAIN TNC-430M 9 AXIS Table Table dimensions 9,500 x 2,000 mm. Permissible Weight on Table 20,000 kg Number/Width/Distance T Slots 8/28/250 Tours Table longitudinal (X-axis) 10,011 mm. Ram transverse (Y-axis) 1,960 mm. Vertical (Z Axis) 1,112 mm. Width between uprights 2,850 mm. Distance from the table to the nose of the head axis 45º in vertical position 1,291 mm. Distance from the table to the nose of the head shaft 45º in horizontal position 1,365 mm. Progress Working (X/Y/Z) 20,000 mm/min. Fast X-Y-Z Axis 30,000 mm/min. Head Automatic Type 45º Head positions 360.0000 x 0.001º Cone DIN 69871 AD 50 Maximum rotation speed 6,000 r.p.m. Main engine power 37 kW Automatic tool changer AITEK Manufacturer Type Horizontal/Vertical Tool Magazine Positions 100 ISO 7388-2 B50 Tool ...
maximum number of results exceeded
please refine your search
