rotation used for sale

Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Three jaw chuck: Ø 200 mm -Speed: 1/8 to 2 1/4 rpm -Direction of rotation: right/left rotation -Tip height: 535 mm -Dimensions: 925/1100/H700 mm -Weight 188 kg

table length: 1050 mm table width: 1050 mm table load: 3,6 t table - tiltable: 0 - 135 ° table rotation: 360 ° table rotation speed: variabel einstellbar U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2,35 x 1,70 x 2,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Apec G30/20 5 axis bridge machining center Simultaneous Travel: Feed rate: X axis travel 2000 mm X/Y/Z axis rapid traverse 60/60/40 m/min Y axis travel 3000 mm X/Y/Z axis acceleration 0.5G Z axis travel 1000 mm Cutting feed rate 1-20,000mm/min spindle nose to table surface 330-1330 mm Table: Spindle: (APEC MONO SUPPORTING HEAD) Table size 2,000x3,000 mm Spindle taper HSK 63A Table load 8000 kgs/m2 Spindle speed 24000RPM T-slot size 28 mm Spindle motor (S1) 25/30 KW ATC: Spindle torque (S1) 119/143 NM Capacity 20 pc 2 axis head A-Axis C-Axis Tool shank HSK 63A Rotation speed 30 rpm 30 rpm Max. tool weight 15 kgs Max. torque 760 Nm 800 Nm Max. tool dia. (w. adjacent tool) 150 mm Clamping torque 4000 Nm 4000 Nm Max. tool dia. (w/o adjacent tool) 180 mm Rotation angle ± 125∘ ±360∘ Max. tool length 300mm Others: Machine Weight 39000kgs (around) Mo ...

I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)

AUERBACH AX3 TLF drilling and milling machine The machine is still in use. Used only for the internal needs of the company, so it was never heavily exploited / did not participate in mass production. Operating hours: 8000 Longitudinal travel (X axis) table: 1600 mm Cross travel (Z axis) column: 700 mm Transverse travel (W axis) drilling head: 1300 mm Vertical travel (Y axis) drilling head: 800-1200 mm Axes of rotation: - axis B rotary table: 360 degrees - axis A drilling head: -25 to +15 degrees Drilling range - deep drilling: Diameter range: 3 - 32 mm Drilling depths in one pass: 1300 mm Maximum possible drilling depth: 1700 mm Main Drive / Deep Drilling Module: Nominal drive power: 12/18.5 kW Rotation speed range: 60 - 8000 RPM Spindle torque: 115Nm feed drive: Feed speed: 1 - 15 (in Y axis 1-10) m/min rapid traverse speed in all axes: 15 (in  ...

Schaudt PS51 Cnc external grinding machine with Knoll vacuum filter, Promot Cnc Cartesian robot, Donaldson vacuum filter and Marposs unit. Ø 360 max workable x 600 mm, max weight 300 kg With Promot CNC magazine Length 375 mm, weight 5 + 5 kg Grinding wheel Ø 762 mm, grinding wheel pack weight 500 kg, max width 125 mm, grinding wheel pack up to 300 mm with crankcase modification, programmable rotation speed 45 - 60 m/sec - Grinding wheel motor power 22 kW Dressing system for shaped rollers Workpiece rotation 1 - 1000 rpm Complete with Promot ELP A0029904 magazine - 2000 Cnc Siemens Weight 10 t grinding only. Accessories: Knoll 2000/MW475 Belt Filter Series No. 214472 Ref. 384014 from 2003 Donaldson DMG D1 57171684 vacuum cleaner from 2007 Two Marposs units Fully functional machine, both Shaudt and Promot can do installation, language change, staff training

Specifications High speed hydraulic system Brush tables Programmed clamping system PCS Conveyor for removing waste from the processing area Three pneumatic sheet clamps CNC Siemens Sinumerik 840D incl. set of tools, Punching force 23 t Thick Turret Tool Punching diameter, max. 89 mm Number of index stations 4 pcs. (Di, Ci, Bi - 2 pcs.) Rotation speed, max. 58 rad/min Sheet thickness, max. up to 6 mm Sheet weight, max. 200 kg Sheet size, max. (X×Y) 2530×1270 mm (without interception) X-axis speed, max. 80 m/min Y-axis speed, max. 60 m/min Travel speed, max. 100 m/min Hole center deviation (X/Y axis), max. 0.1 mm Revolver rotation speed 30 rad/min Tool change time 1–3 sec Number of sheet clamps 3 pcs. Program memory Sinumerik 840D 2000 KB Machine size length × width × height (with auxiliary table) 5.4×5.6×2.5 m Machine weight 13,500 kg

Max. Twisting capacity 16x1,5 (Steel pipe) Max.Bending Radius 40 mm Twisting speed 500 ° / s Unlimited program writing Control unit Bosch Rexroth Twisting precision ± 0.05 ° Max.bending angle 185 ° Feeding length 2000 mm Unlimited number of bending programs Rotation speed 720 ° / s Feeding precision ± 0.05mm Feed speed 1.2m / s Rotation accuracy ± 0.05mm Twist direction change time 3 sec Weight 850 kg Dimensions (Width) 1000 mm Dimensions (Length) 3250 mm Dimensions (Height) 1800 mm

Linear Robot: Sepro Model: SR 4020 S TE (telescopic) Control: Visual G IV Horizontal movement on the beam Stroke = 2,500mm Drive = Servo motor Stop command = CNC Speed ​​= 4,000 mm/sec. Fixed Spacer Under Beam = Included demoulding movement Stroke = 600mm Drive = Servo motor Stop command = CNC Speed ​​= 3,200 mm/sec. vertical movement Arm Architecture = Telescopic Stroke = 1,250mm Drive = Servo motor Stop command = CNC Speed ​​= 5,000 mm/sec. Included Options Rotation R1 = 0º - 90º - Pneumatic Rotation R2 = 0º-90º or 0º-180º Intermediate stop in R2 included Part Pickup Circuits (Venturi) = 4 Vacuum/Pressure Pressure Circuits = 2 16 Input / 16 Output extension card EUROMAP 67

Used INOXPA MBC-950 Powder blender Mixer suitable for pharmaceutical / food sector. The mixer can be free from the end of November 2021. - Mixer size (lxhxp): 3200x2400x1200 mm - weight: 2692 kg - vacuum pump motor power: 5.5 kW - bicone rotation motor power: 4 kW - rotation speed: in the INOXPA manual it is indicated that the gearmotor turns 13 rpm but it may turn even faster - material: AISI 304, AISI 304L, AISI 316L front protection box dimensions (lxhxp): 1400x2200 x1100 mm rear protection walls dimensions (lxhxp): 530x2200x50 mm

Make: Mak Model: 8M25C 8 cylinders n line IMO II Built year: 2014 Condition: New / Unused Output: Rated 2,666 kW at 750 rpm 2 Counter Clockwise rotation 2 Clockwise rotation Compressed air starting suitable for operation with MDO max. viscosity: 11 cST/40 C Fuel consumption: 187 g/kWH at 100% rated output 184 g/kWH at 85% rated output Quantity: 4 With ABS class certificate. Contact us at infoheeyas.co.uk #mak #engine #new #ship #vessel #boat #shipengine # caterpillar #makengine #power #energy #propulsion #sailing

SCM sliding table saw model SI400e: – 3200mm aluminium trolley – motorized lifting of the blade unit, with digital indicator – motorized tilting of the blade unit, with digital indicator – Rip fence with manual adjustment – main blade D=400mm – 3 blade rotation speeds, 3000-4000-5000rpm – independent engraver with external adjustment – engraver rotation speed 8500rpm Machine according to CE standards

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 € : 289.26 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1600 mm : 1800 mm : 488 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : 2024 : 6250 : März 2024, Zwischenverkau : Italien : 15040 € : 308.32 € : Doppelsäulenführung : 3270x27x0,9 mm : 40/80 m/min : 300 mm : 300 mm : 350x260 mm : rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 830 mm : 1.5 kW : 1500 mm : 1600 mm : 1900 mm : 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with Mo ...

Tap, Drill ELPROM LOWETSCH BULGARIA R 10 ( R10 ) 0,4 KW 310 / 700 rpm ( clockwise rotation / counterclockwise rotation ) 220 V 1AC 50 Hz Thread size: M3 - M10 approx. 2.0 m Connection cable used, tested ! Dimensions ( without cable ): 330 x 160 x 70 mm

Suitable for automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Total enclosure including coolant system,, Motorized setting of the rake and clearance angle,, Preselection of the direction of rotation of the grinding wheel and automatic change of direction of rotation,, Grinding speed and grinding path stepless adjustable,, Operating system modified Windows version,, Storage of approx. 4,000 programs possible,, Standard software package for tooth geometries according to the program overview,, Program for grinding saw blades with group teeth, with different tooth geometries,, Program for newly fitted and broken teeth,, Software package for multi-surface machining on the positive chip and flank face,, oscillating grinding on the face and top,, Automatic grinding wheel compensation,, Automatic central lubrication,, Feed pawl 2 mm,, 1 sawb ...

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Kistler, tiltable welding turntable with mobile base - Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8m/min at Ø 400 mm - Direction of rotation: right/left rotation -Number: 1x available -Total dimensions: 740/580/H630 mm -Weight: 145kg

VARGA FLEXO 800 Type HK68,, C.I. flexo printing,geared, 6 colors, working width 800 mm., Printable materials:, - Pre-treated plastics (PET, PE, BOPP), - Multilayer films, - Paper, - Lenze servomotors installed in machine- main drive, unwinding, winding, - pressure cylinder: central impression, - CI pressure cylinder material: ST52–3, - number of printing stations: 6 pcs, - printing length: 30–55 cm, - print length scale: 1 cm, - printing accuracy at constant speed ± 0.2 mm, - length register setting: manual, - cross register setting: manual, - maximum print width: 800 mm, - Maximum roll width: 900 mm, - Unwinder: 1 pc, - core diameter : 76 mm, - Maximum diameter of reels: 1000 mm, - mechanical speed: 15–120 m / min, - Machine weight: 7 tons, Equipment:, - Automatic, two-way winding and rewinding system that maintains a constant tensile force after setting the material parameters.  ...

New Palletizer ROBOT ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation Speed suitable for 72 000 cans hour line for 250 ml slim cans with 6 4 configuration on 1200 1000 mm pallets Package infeed height H 2000 mm Designed for pallet dimensions 1000x1200mm Max standard pallet height 1900mm Pallet transfer height H 500mm Machine is composed of Fast Pack Formation Table at High Elevation Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer It is controlled by the PLC and The device is equipped with a turner which turns the product of 90 if required Intermediate Table Consists of conveyor table a product pushing device to pallet lifter Driven by a geared motor The translation of the layer from the performer to the palletiser is carried ...

Used filling line for CSD and still drinks up to 4000 bph Bottles PET and Glass In the packaging industry versatility is key This filling line handles both PET and glass bottles This double compatibility allows for great flexibility in production adapting to different market needs Filling Capacity of the used filling line for CSD and still drinks The filling capacity varies according to the size of the bottles With 0 5 liter bottles the capacity reaches 4 000 units per hour For 1 0 liter bottles the capacity drops to 3 000 while for 1 5 liter bottles it stands at 2 500 This production scale adapts to different sizes of operations ensuring efficiency and flexibility Format Molds present in the used filling line for CSD and still drinks Format molds are a crucial element in these lines This line features three interchangeable molds for PET and glass covering the most common sizes of 0 5 1  ...

Used Complete Bottling Line Alfatek 2018 HPE HIGH PRESSURE ELECTRONIC MONOBLOCK FILLER CROWN CAPPER ALFATEK Mod 9 1 Machine suitable for bottling fermented beer in the autoclave The complete bottling line for wine and beer is supplied ready with connection points for air product discharge point and electrical connection Max production 900 1000 BPH with carbonated product e 0 33 cl bottles Maximum valves flow rate l h 1250 Maximum machine rotation speed 400 2000 Filler pitch diameter 600 mm Pitch capper diameter 410 mm Maximum bottle diameter 115 mm N B Production may vary according to the type of product to be bottled bottling pressure product temperature type of bottle etc Condition of the beer product a constant and adequate pressure b constant temperature 0 2 c rested product not overflowing The monoblock is composed of FILLER Series BHPE ELECTRONIC ISO BARICA HIGH PRESSURE 9 valves S ...

Used Labeling Machine Cavagnino Gatti 1999 The Cavagnino Gatti CG 80 is a used labeling machine manufactured in 1999 This high speed labeling machine offers exceptional performance and reliability for various labeling applications With its advanced features and sturdy construction it has become a preferred choice in the industry Key Features and Specifications The CG 80 model is equipped with five heads enabling efficient labeling operations It boasts two front and back adhesive stations as well as a glue station allowing for versatile labeling options The machine operates in an anticlockwise rotation ensuring smooth and precise label application A notable feature of the CG 80 is its rotating plate with Malta crosses providing stability and accuracy during the labeling process The entire machine is enclosed in stainless steel ensuring hygiene standards and durability Safety protections a ...

Used Filling Machine Cobert Olimpia 1993 The Cobert Olimpia 16 is a used filling machine manufactured by Cobert in 1993 This versatile machine is designed to efficiently fill containers particularly glass bottles with various products such as alcohol sparkling wine and still wine With its reliable performance and adaptable features it has gained popularity in the industry Key Features and Specifications The Olimpia 16 model features 16 filling nozzles allowing for simultaneous filling of multiple bottles It operates using a slight vacuum in the bell ensuring precise and controlled filling The machine incorporates a variable height bell accommodating different bottle sizes One of the notable features of the Olimpia 16 is the rack and pinion mechanism for adjusting the filling levels on the nozzles This feature enables fine tuning and consistency in the filling process The bottle lifting p ...

Used Tetra Pak Cap Applicator 30 Flex for Helicap23 2012 The Tetra Pak Cap Applicator 30 Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak in 2012 This machine is specifically designed for applying plastic screw caps onto containers ensuring secure sealing and efficient production With a speed of 9600 bottles per hour BPH it offers a high capacity solution for the packaging industry Specifications Manufacturer Tetra Pak Model 30 Flex For Helicap 23 Year 2012 Speed 9600 BPH This capping machine in suitable for 1000 slim format Cap Type and Rotation Direction The capping machine is compatible with plastic screw caps providing a reliable closure mechanism The rotation direction of the machine is clockwise ensuring proper application of the caps onto the containers Current State and Safety Features Currently the Tetra Pak Cap Applicator 30 Flex for Helicap23 is i ...

Used filling machine Tetra Pak TBA8 1000 Slim Introduction of the Filling machine Tetra Pak TBA8 Firstly in the industrial bottling sector the Used Tetra Pak TBA8 1000 Slim Filling Machine represents a standout technological solution combining efficiency and innovation Manufacturer and Model Produced by Tetra Pak a leading company in the industry the TBA8 1000S model was launched in 2006 This model is renowned for its reliability and high level performance key aspects for high speed bottling operations Speed and Capacity Secondly the TBA8 1000 Slim offers an impressive speed of 6000 BPH bottles per hour demonstrating its capability to handle high production volumes without sacrificing quality or efficiency Containers and Formats Thirdly this machine is designed to work with Brik type containers optimal for a wide range of liquid products Specifically it handles 1 0 L formats meeting the  ...

Code: 0223 Brand: SICAR Model: SFL 1000/M - CE Standard Spindle moulder with long tables for milling of wood, plastics, composites and various materials - CE Standard Technical data: Working table size mm 800 x 2500 Working table height from ground mm 910 Spindle diameter mm 35 Useful spindle height mm 200 Rotation speed rpm 3500/6500/8000/10000 Motor power Hp 5,5 Adjustable fence with read-out Electric spindle lifting with mechanical display Rotation reversal Overall dimensions mm 2500 x 1150 x 910 h Weight kg 650

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

maximum panel thickness 50 mm maximum panel weight 80 kg max panel dimensions X: unlimited / Y: 1250 mm / Z: 50 mm minimum panel dimensions X: 270 mm / Y: 150 mm / Z: 3 mm feed speed: 25 m/min 1.7 kW drilling motor rotation: 3,600 rpm 12 vertical drills 8 horizontal drills, 2 x 2 in X direction, 2 x 2 in Y direction grooving saw in X, diameter 100 mm 5 kW ISO 30 main spindle rotation 12000/24000 rpm 4 position tool changer option included: Lamello Clamex P

CASOLIN sliding table saw model ASTRA 3000: – 3000mm steel trolley – width on parallel guide 1100mm – manual lifting and tilting of the blade unit – main blade D=400mm, 5.5 hp motor – 3 blade rotation speeds, 3000-4500-6000rpm – independent engraver, 0.75 hp engine – engraver rotation speed 8000rpm Machine not according to CE standards, for export AVAILABILITY FROM MAY 2024

CNC: Okuma CNC version: MX 40 HA X-axis travel: 560 mm Y-axis travel: 610 mm Z axis travel: 560 mm Pallet number: 2 Board/Pallet Size: 400mm x 400mm Table capacity: 400 kg Continuous pallet (table) rotation control: Yes Degrees of rotation for indexed pallet (table): 360° Number of controlled axes: 4 Number of tools: 40 Spindle taper: 40 BT/SK/ISO/HSK RPM: 7000 rpm Refrigeration through the chuck: Yes Power: 20 kW Chip conveyor: Yes

Rotation diameter max. 360mm Turning length max. 500mm Seiki Seicos A 10L control maximum rotation diameter 450 mm main spindle: Speed range - main spindle 30 - 4,000 min/-1 Drive power - main spindle 11 / 15 kW Spindle assembly A2-8 maximum usable bar diameter 65 mm maximum spindle diameter 255 mm Distance spindle center - plane 1.015 mm racing: x-axis 265mm z axis 530mm C axis 360 Tool turret: Number of tool positions 10 pos. Outer diameter 25mm Inner diameter 32mm Type QCT / KV 40mm Tool holder no. 40 QCT Tool magazine: Number of tool places 12 pos. Maximum tool size 50 x 80/200 mm Maximum tool weight 6.0 kg Driven tool stations: Number of motorized tool stations 5 stations. Speed range - driven tool stations 100 - 3,000 min -1 Drive power - driven tool stations 5.5 / 2.2 kW Counter spindle equipped with C axis. Excellent supply of driven tool holders.

Indramotion MTC micron numerical control (installed 2021) Rotation diameter over the bench 460 mm Swing diameter above the carriage 258 mm Rotation diameter under head 670 mm Point height 225 mm Center distance 1000 mm Guide distance 300 mm Spindle speed 0-3000 RPM SPINDLE ASA D1-6” Spindle hole 58 mm Self-centering hole 90 mm Maximum weight between points 400 mm Dimensions 2430mm long 1346mm wide 1545mm height Year 2001 Machine weight 1750 k

Vertical axis grinding machine Mod. VAM RV 800, complete with diamond wheel holder plate (excluding wheel), diam. Mm 420 with abrasive sectors, low voltage electrical system. Automatic descent displayed electronically controlled, allows flattening cycles which include: roughing and finishing passes, flash hiding passes, head lifting at the end of the work cycle at the programmed starting point, recovery of wheel wear in sectors during a work cycle (we recommend the use of self-brightening sectors as the NC does not manage the diamond grinding of the wheel). The descent of the wheelhead is interpolated with the revolutions of the table. Quick for head up and down, automatic mast lubrication. 22.5 kw (HP 30) electrospindle, equipped with precision bearings with automatic play recovery. INVERTER for grinding wheel electro-spindle speed adjustment, display of rpm and motor absorptio ...

Trumpf TC 260 Rotation punch press Machine currently in production, in very good working condition and fully functional. cutting pressure maintenance performed 250 kN Max sheet thickness 6 mm Max diameter 76 mm punching Max. velocity of 60 m/min X posizianamento 108 90 m/min Y-axis Simultaneous m/min continuous axis of rotation 360°/s WORKING FIELD : In the transverse direction of X 2700 mm 1300 mm In the longitudinal direction (Y) 10 tool stations Number in the automatic warehouse multitool

• Tube advance by pressure rollers, adjustable feed speed from 0 to 200meter / minute • Automatic loading by inclined plane Lg 6000mm • Double clamping jaws adjustable in pressure • Automatic sprinkler lubrication • Chainsaw head mounted on a double column, with possible backlash adjustment (head redone in 2019), with manual rotation of the cutting head. • Blade rotation speed 50/100 revolutions / minute or 25/50 revolutions per minute. • Maximum blade diameter 350

Working area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12100 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4 ...

The machine is in good technical condition. Circulating diameter above the bed:: 400 mm Max. turning length: 570 mm Max. turning diameter above the bed: 400 mm Max. rotating diameter above the support: 220 mm Spindle bore: 52 mm Minimum spindle rotation speed: 9 1/min Maximum spindle rotation speed: 1600 1/min Total power: 7.6 kW Dimensions LxWxH: 221 x 1020 x 1350mm Weight: 2800 kg Accessories see photo By prior arrangement, the possibility of a tour in progress.

Used Capsuling Machine Robino and Galandrino up to 15000 bph In the bottling field efficiency and precision are paramount They ensure maximum productivity and uphold high quality standards Consequently the used Robino and Galandrino capsuling machine emerges as a technologically advanced solution Specifically designed to meet particular needs it boasts a capacity of up to 15000 bph This article meticulously explores the machine s technical characteristics and specifications Furthermore it highlights how it can significantly optimize bottling processes PVC Capsule Distributor of the Used Capsuling Machine Robino and Galandrino up to 15000 bph The PVC capsule distributor ingeniously designed for continuous feeding guarantees an even distribution of capsules on bottles This essential component steadfastly maintains a steady production flow Moreover it ensures each bottle is sealed correctly ...

Machine in good technical condition, possibility of testing after agreement. Circulating diameter above the bed max. 780 mm Circulating diameter above support max. mm 630 Max. turning diameter above the bed mm 406 Max. turning length in the chuck mm 760 Max. diameter of the turned bar (on the main spindle) mm 65 Stroke in the X axis mm 260 Stroke in the Z axis mm 830 Stroke in Y axis mm 102 (+/-51) Stroke in the B axis mm 830 Stroke in the C1 axis (rotation of the main spindle) - ± 360° Stroke in the C2 axis (rotation of the secondary spindle) - ± 360° ØS Fanuc, weight 6,000 kg.

min and max tenon width: 4-100 mm + thickness min and max tenon thickness: 4-30 mm min and max tenon depth: 6-80 mm Table adjustments: vertical: 120 mm horizontal: 60 mm front tilting: 20? scale fence on table for miter positioning: 45? cutter spindle motor: 3kw motor for drum rotation: 0,75kW rotation speed of drum adjustable

x-travel: 210 mm z-travel: 350 mm max. loading: 25 kg Distance C/Z-axis (mm): 270 mm max. test diameter (mm): 300 mm Rotation axis C (turntable): 0° 90° 180° 270° diameter of rotary table: 150 mm Measuring path R-axis: 170 mm required space: L2,0 x B0,8 x H0,82 m Scope of delivery: - Form measuring system F1004/350 - Work table - Rotary table (rotation axis C) - All documentation - Software TURBO FORM 8.21 + licences - Accessories (see pictures) Condition: - As good as new - Functional Maintenance: - Last inspection on 03/08/2021 - Test report from Jenoptik available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0253 Brand: CEHISA Model: BRYKO - CE Standard Automatic edge bander for wood, Pvc, veneer, abs, melamine edges - CE Standard Technical data: Edge thickness min/max 0,4/2 mm Min/max panel height 8-40 mm Min panel length mm 120 Min panel width mm 75 Panel feed speed mt/min 5,5 Composition: Gluing unit: Glue tank with digital thermostat - Automatic feeder for roll and strip edges - 1 motorised roller + 1 idle roller 2-blade End cutting unit with high-frequency motor - Tool rotation speed 12000 rpm Upper and lower trimming unit - Tool rotation speed 12000 rpm Total installed power Kw 2,5 Compressed air 6-7 bar Overall dimensions mm 1800 x 950 x 1200 h Weight kg 430

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 € : 214.43 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1600 mm : 1200 mm : 1800 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Option: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 € : 259.94 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm : 1600 mm : 1550 mm : 1750 mm : 460 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 € : 222.63 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1650 mm : 1200 mm : 1850 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 € : 194.99 € : Schwenkrahmen : 2450x20x0,9 mm : 35/70 m/min : 220 mm : 200 mm : 250x150 mm : rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm : 0.7 kW : 1330 mm : 1300 mm : 1880 mm : 350 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent utomatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. OPTION: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - th ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 € : 238.62 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1650 mm : 1200 mm : 1900 mm : 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,-- The data for this ad was created with ModulMWS - t ...

Used spiral mixer Kemper SPL 75 for the production of high-quality doughs. The machine can be switched slowly and quickly with 2 levels in automatic mode via 2 timers. The boiler, spiral and tool are made of stainless steel. Boiler can be switched with right and clockwise rotation. The machine is immediately available in the warehouse in Bielefeld. Machine is with new wear parts and repainted Machine completely redesigned -the following parts are renewed, buttons, clocks, ball bearings, V-belts, seals, Cable and machine repainted -2 speeds slow and fast -2 timers, automatic switch-on and switch-off - with plastic flour dust cover -Boiler, spiral and guide rod made of stainless steel -Push-button control -Boiler capacity approx. 175 litres -Bowl diameter inside 76cm, kettle height inside 44cm -Boiler right counterclockwise rotation - Manual and automatic switcher - Machine  ...