rotation used for sale

Welding turntable - welding turning device with housing Load capacity approx. 50 kg Lathe chuck diameter 300 mm Chuck speed 1.0-15 rpm. Mains connection 230 Volt, 50 Hz - Flat spiral lathe chuck with inwardly stepped chuck jaws - Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left - Start via electric switch - Welding current transmission with sliding contact - Suction connection 160 mm- Interior lighting door opening W x H 715 x 1060 mm Interior dimensions W x D x H 780 x 780 x 1100 mm Space requirements W x D x H 900 x 900 x 2300 mm weight 190 kg; used

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution  ...

workpiece return Brand: Ligmatech Type: ZHR 15/XX/LI The workpiece return enables one-man operation on edge banding machines. Workpieces coming out of the machine are roller conveyor, which transports the parts to a lifting station promotes. Via a scissor mechanism the parts are Upper pressure promoted this to an inclined plane, consisting of roller rails, transports. On this inclined roller conveyor, the parts slide by their own weight to the Operator back. The driven roller conveyor is equipped with a turning station the parts coming out of the machine crosswise rotated by 90 degrees and thus conveyed back longitudinally can. To support long transverse arriving parts an additional support roller track is attached, which can be folded down when not in use. Similarly, when not in use, the inclined roller The return path can be folded vertically upwards, so t ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTool magazine,chain, 60 pocketsTool magazine chain magazin ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmTool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper MiscellaneousClamping SystemHSK-A 63 Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring s ...

WP Haton, Rototherm, bakery oven, brand: WP Haton; type: Rototherm; rotation oven: yes; description: turning circle 1260 mm; room dimensions . approx. 1080x1650x1980mm; equipped with digital readout with touch-key operation - 3 ovens

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Pipe cutter, pipe cutting and chamfering machine for plastic pipe Rotary pipe cutter Manufacturer: ETERNIT Fabr. No. 5/9905 II Year of construction approx. 1980 Pipe diameter approx. 60 to 150 mm Wall thickness 4 to 20 mm Rotation speed approx. 80 rpm. Motor power 180 Watt Mains connection 400 Volt, 50 Hz - Centrally clamping material clamping stick for workbench assembly - For rectangular cutting and touching of pipes made of PE, PVC or other plastics- Cutting process according to the grooving turning process- Automatic feed movement of the parting carriage via cams - chamfering of the workpiece via part-cutting mould steel possible Space requirement L x W x H 530 x 350 x 600 mm Machine weight 34 kg good condition; used

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 € : 144.2 € : 1270 mm : 2.5 mm : 90 mm : 6 m/min : 1.1 kW : 1850 mm : 700 mm : 1200 mm : 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 € : 148.32 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5750 € : 118.45 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll hardened rollers right / left rotation with double foot switch user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 9660 : ca. 10 Wochen ab Auftrags : Türkei : 7800 € : 160.68 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll hardened rolls tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with engine brake with machine lamp with digital angle display Weight: 460 kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 3 clamps ? Maintenance free drives ? Repositioning device with programmable presser foot ? Parts chute 500 x 500 mm ? Good parts container ? Swarf bucket Cutting head ? Hydraulic punching head ? Single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Open control system based on BOSCH ? Control panel with TFT colour screen 12.0? ? Program management ? Online-help ? Integrated technology data ? Diagnostic functions ? Teleservice Programming ? Machine-oriented shopfloor programming Data transmission ? Disc drive and network connection Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Mul ...

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine with 17 tool stations, 2 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Parts chute 180 x 150 mm ? Swarf bucket ? Punching head ? Hydraulic punching head ? Rotatable single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Controller based on Bosch PNC-P ? Control panel with 15 TFT color touch screen ? Easy to use ? Online-help ? Integrated USB interface ? RJ 45 network connection ? Diagnostic functions Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Multitool ? Function MultiShear ? Function Roller Technology ?  ...

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 18 tool stations, automatic tool changer, 3 clamps ? Automatic parts chute 500 x 500 mm ? Parts container ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools, automatic tool length compensation, spray tool lubrication, 2nd lubricant container, programmable stripper movement, vacuum slug removal, swarf bucket ? Control: 32 bit microprocessor control TRUMAGRAPH CC 220 S, 10.4 color screen, programmable logic controller, easy to use, diagnostic functions, graphic programming TRUMAGRAPH, integrated 3.5 disk drive, RJ45 network connection ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? Function MultiTool ? Pneumatic repositioning  ...

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps ? Drives: Maintenance-free, digital three-phase servo motors ? Punching head: Hydraulic system with closed control loop, single tool adapter, 360? rotation of all tools ? Automatic repositioning device with programmable presser foot ? Vacuum slug removal ? Swarf bucket ? Brush tables ? Parts chute 200 x 200 mm and sorting of parts into 2 containers ? 2 parts containers ? Controller BOSCH Type 3, activity-oriented user interface, Online help, diagnostic functions, 3.5 disk drive, BNC/RJ45 connection, TFT color screen 10.4 ? Graphic programming ToPs 2000 ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? MultitShear ? MultiBend ? SoftPunch ? Table extension ? Start post

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

PRO-Version High Performance vertical packaging machine for tetraeder AND pillow bags INCLUDING 0.5L/10-head-scale. Innovative rotation sealing system for triangle bag. OMRON PLC, interactive 9.7-LCD touch panel display, SCHNEIDER and OMRON electronic components, AIRTAC pneumatics and OMRON PID temperature control, servomotor film pulling, pneumatic sealing unit. - Specifications: vertical and horizontal sealing width: 10mm | cutting way: searate cutting | stainless steel (SS304) | 10-head-0.5-liter-multiscale | weighing range: 5-500g | accurracy: 0.1-2g | max. speed of the machine in neutral: (only weigher, not complete system): 60 cycles/minute | 9.7 touchscreen | 100 program setting | bag sizes: L(50-230)xW(60-160)mm | max. speed of the machine in neutral: 50 cycles/minute | 220V/3.5kW | 6bar, 0.3m?/min | machine dimensions: L1100xW1400xH2220mm | weight: 650kg. Please note that our ne ...

This mixer was used in a paper factory for stirring waste water. Diameter: 2300mm, direction of rotation: left, speed: 22rpm. Agitator body: Hyperboloid with glass fiber reinforced plastic. Motor: Siemens LA100ZLP4EW, Gearbox: Siemens FZAF108B. Total weight: approx. 270kg, drive shaft: DN150, length: 5332mm. Documentation available. On-site viewing is possible.

Capacity: 46 t Table length: 3320 mm Table width: 2700 mm Stroke: 2400 mm CNC Brand: Siemens CNC Model: TOUCH 277 Table load lower table 46.000 Kg Table load upper table 20.000 Kg Minimum Die height 300 mm Maximum Die height 2400 mm Equipped with options Tilting table 180 Gr Electric paralel control system X-travel lower base extensions to 2000 mm Distance between column:2130 x 2730mm Hight under roof:      2400mm Table Length:          2500 x 2000mm Ram stroke:            2100mm Approche speed:        80mm/min. Working speed:         8mm/min. Return speed:          50mm/min. Table rotation:        180U/mm Length:                7800mm Width:      & ...

JOTES SOH-10 internal grinding machine was built in Poland. The SOH10 grinding machine is used in the finishing process to give the right shape and surface roughness to holes with a diameter from 10 to 100 mm and conical holes with a maximum apex angle of 30°. The high-performance spindle machines workpieces with a maximum diameter of 300 mm (with guard) or 450 mm (without guard). The total weight of the machine is 2900 kg. Technical parameters of the JOTES SOH-10 internal grinding machine - minimum hole diameter: 10 mm - maximum hole diameter: 100 mm - maximum hole length: 160 mm - maximum diameter of grinded workpiece (with guard): 300 mm - maximum diameter of grinded workpiece (without guard): 450 mm - spindle rotation speed: 70-700 rpm - manual spindle feed (1 wheel revolution): 2,5 mm - largest spindle turning angle: 15° - lateral manual feed of spindle (forward): 50 m ...

Seewer Rondo SKO 67 Combi Sheeter Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation - mobile on wheels - Machine is functional More information and pictures on request

cutting diameter: 660 mm saw band length: 9000 x 54 mm cutting width: 1,6 mm Capacity 90° - round: 660 mm Capacity 90° - square: 650 x 650 mm Capacity 90° - rectangle: 650 x 1080 mm Capacity 45° - round: 660 mm Capacity 45° - square: 650 x 650 mm Capacity 45° - rectangle: 650 x 670 mm Capacity 30° - round: 410 mm Capacity 30° - square: 410 x 410 mm Capacity 30° - rectangle: 650 x 410 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 7100 kg dimensions of the machine ca.: 2500 x 2200 x 4500 kg The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydr ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmTool magazine, wheel, 63 pockets HSK-A63Tool magazine wheel magazine (1 wheel) with 63 tool pockets HSK-A ...

Vertical Lathe Double Column TOS SK16 Maxi turning diameter: 1700 mm Turning height: 1250 mm Rotation: from 3,55 to 150 RPM 4-jaws chuck Ø 1620 mm Chuck crossing diameter: Ø 1620 mm Max workpiece weight: 5000 kg Left vertical slide rame stroke: 900 mm Right Vertical slide ram stroke: 600 mm (turret 5 tools) Right Horizontal slide ram stroke: 500 mm Power: 12 kW Voltage: 380 V Length: 4600 mm Width: 2800 mm (without chuck protectors) Total height in low position: 3800 mm Weight: approx 20 T

: neu : ca. 6 Monate ab Auftragse : Taiwan : 27100 € : 547.42 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Includes 1x high-speed door, 3x turntable for 90° rotation, 11x carrier chain conveyors, 1x transfer carriage, 1x roller conveyor system-roller conveyor, max. installation height: 1000mm, use within a factory building, permitted conveyed goods: Euro pallets and Chep, with extensive documentation, numerous spare parts can be supplied, on-site inspection is possible.

Dough sheeter Fritsch Rollfix - used Fritsch Rollfix sheeting machine - with 61cm bandwidth - right left rotation - with manual and foot switch - Band length 116cm each External dimensions approx.: Length: 244cm Width approx.: 80cm Height: 110cm

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48700 € : 983.74 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 32200 € : 650.44 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 14600 € : 297.84 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed

: neu : ca. 6 Monate ab Auftragse : Taiwan : 18300 € : 373.32 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

x-travel: 8.000 mm y-travel: 3.800 mm z-travel: 2.100 mm Control: HEIDENHAIN iTNC-530 table-size: 8.500 x 2.500 mm distance between columns: 3.100 mm rapid travel x/y/z: 15/12.000 mm/min feed: 5.000 m/min milling head: Automatisch Drehung 4/5 number of spindle speeds: 4.000 U/min/rpm spindle drive: 37 kW transmission ratio: 2 Stufen table weight: 35.000 Kg distance spindle /table: 500-1.750 mm rapid travel x/y/z: 10.000/12.000 mm/min feeds:: 7.000 mm/min dimensions of the machine ca.: 19.370 x 5.850 x 5.970 mm tool change unit: 30 pos. weight of the machine ca.: 93 t - 5 AXIS BRIDGE TYPE MILLING MACHINES Max height table to underside bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid Feed (X Axis) 10.000 mm/min Rapid Feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED B-Axis head swivel ± 190º C Axis head rotation ± 360º ...

x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm control: Siemens 840 D tool taper: SK 40 spindle turning speed - stepless: 10000 U/min power capacity at 100 % load: 19 kW feed X/Y/Z-axis: 82000 mm/min rapid traverse X/Y/Z: 40 m/min feed force X/Y/Z axis: 12 / 14.000 N B-axis: 360 x 1 ° table rotation speed: 25,00 U/min table load: 300 kg size of pallet: 400 x 500 mm total power requirement: 75 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 8,8 x 4,6 x 3 m Horizontal machining center with: - SIEMENS SINUMERIK 840D control system - 8-fold pallet changer (400x500mm) - coolant system with paper belt filter - IKZ - chip conveyor - cooling unit - B-axis 360 x 1° - tool magazine 240-fold (SK 40) - tool breakage control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6822 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 5 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) universal spindle 230mm, right/left rotation adjustment 5.5kW - all spindles adjustable up / down, right / left - all spindles equipped with an electric brake - spindle diameter 40mm - from above, 4 metal, toothed introductory rollers - 3 pulling rollers from above, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - side pressure from below - 2 types of feed speed - feed motor 1.2 kW - electric setting of planing thickness - length of the introductory tabletop 2500mm - locked in the cabin - central lubrication of the countertop - diameters of the extraction spigot 150mm, 4x120mm - ...

offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm

DORRIES VCE 2400/200 MC/FC 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Plate dia.: 2000 mm Max. turning dia.: 2520 mm Max. turning height: 1990 mm Ram travel: 1500 mm Main drive motor: 75 kW Live spindle: Spindle rotations: 45 - 1500 1/min Spindle motor: 15kW Max. workpiece weight: 12 Ton Tool magazine: 16(turning)+16 (drilling) Station Automatic Tool Changer Auto tool probe Auto detail probe Pallet changer with 3 pallets (turning plates) Table rotation (2 ranges): 1. 2,5 – 70 2. 10-280 Machine space required: 11000 x 11000 mm Video before dismatling

bending length: 1540 mm sheet thickness: 1.5 mm steel Roller diameter: 80 mm Motorized rear roller lining with automatic switch-off Clockwise and counterclockwise rotation via foot switch 3 roller drive Safety cable pull switch Conical rounding possible

A used dough sheeter from Fritsch Model Rollfix 3-630 with 60cm bandwidth is currently for sale and immediately available in our warehouse. Dough sheeter Fritsch Rollfix - used Fritsch Rollfix sheeting machine - with 60cm bandwidth - right left rotation - with manual and foot switch - Band length 116cm each External dimensions approx.: Length: 244cm Width approx.: 80cm Height: 110cm

Double-sided tenoning machine Helma DRP 2000 Spindle rotation speed 6400 rpm Max blank length 2000 mm Feed speed 2 m/min Power 7 kW Weight 2750 kg Overall dimentions 4000x2000x2000 mm

Shaft diameter 40 mm Cutting height 125 mm Cutting width 750 mm Clearance height 130 mm Distance between upper rollers 600 mm Rotation speed of saw shaft 3300 rpm Power 55 kW Weight 1350 kg Dimention WLH 2000х2000х1500 mm

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 121200 € : 5700 mm : 1100 mm : 1550 mm : 2700 kg : 25 cm³ : 76,1 x 6,8 mm : 2”1/2 mm : 76,2 x 3,8 mm : 63,5 x 63,5 x 5,6 mm : 70 x 50 x 8 mm : 70 x 50 x 6 mm : 79 mm : 250 mm : 20 mm : 195 ° : 5/7 U/min : 27 kW : 200 l FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.