rotation used for sale

Manufacturer JUARISTI Model TS 3-MG 12 Year 2009 CNC HEIDENHAIN i TNC-530 Rotary table Type Juaristi MG-12 Table Surface 2.000 x 2.500 mm. T Slots 11 T Slot distance 170 mm. Max weight allowed on table 8.000 kg Table Rotation (B Axis) Continuo – 0,001º Travels Longitudinal travel (Z Axis) 2.475 mm. Axial travel (W Axis) 800 mm. Vertical travel (Y Axis) 2.500 mm. Cross travel (X Axis) 3.000 mm. 5 controlled axes X, Y, Z, W, B, U Main Spindle Quill Diameter 130 mm. Speed 3.000 rpm Main Axis Orientation INCLUDED Taper ISO 50 DIN 69871/1-B Milling head Type INCLUDED Head Power 30 kW Speed Ranges 2 Turning Speeds 0-2.500 rpm Boring head Andrea Chuck model D`ANDREA UT5-800-S Head Ø Ø 800 mm Cross Axis Travel 250 mm. Automatic tool changer ATC Type Horizontal / Vertical ATC Positions 30 Other equipment TS-3 head, TS-5 column and longitudinal bed IN ...

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

Spiral kneader Kemper SPL 75 Bakery dough kneader Kemper SPL 75 with stainless steel kettle and stainless steel spiral for maximum 120 kg dough immediately available in stock for sale. The spiral kneader is slow and fast at 2 speeds. 2 speeds slow and fast 2 timers automatic on and off with plastic flour dust cover Boiler, spiral and guide rod made of stainless steel Push button control Boiler capacity approx. 175 litres Boiler diameter inside 76cm boiler height inside 44cm Boiler right left rotation Hand and automatic switch Machine is rollers with 2 locks Easy operation and cleaning Capacity for a maximum of 120 kg of dough or a maximum of 75 kg of flour -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 2z2p7f Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) tieflochbohrmaschine, taradeuse trous profonds

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

table diameter: 5600 mm table load: 150 t x-travel: / mm total power requirement: 88 kW weight of the machine ca.: 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: decommissioned since 1980 Machine type:C.T.F Diameter core faceplate: ?3000 mm Diameter ring faceplate: ?5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.:55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: ?88 KW milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm):?3140 mm/min Drive power: ?11 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinal stroke: 800 mm, Transversal stroke: 225 mm, Vertical stroke: 440 mm, Cone spindle: ISO 40, Number of speeds: 50-2000 rpm, Surface of the table: 1050 x 280 mm, Distance between slots: 63 mm, Forward longitudinal table: 3000 mm / mi., Rotation in both directions + / -: 1000 mm / mi, Table crossfeeder: 3000 mm / mi., Width slots: 3 x 16 H 7, High: 1.8 m, Long: 1.5 m, Weight: 1600 Kg, Width: 1.9 m, Specification: Universal

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Technical specifications: Year of issue - 1 979 Conveyor width, 250 mm Cutting height, 100 mm Main engine, kW 50 Engine power, 1.5 kW Speed of rotation of a saw shaft, rpm 4600 Max. diameter of a saw disk, mm 340 Landing diameter, 70 mm Weight, 2500 kg

Machine has 30tns, 30001500, sheet thickness max 8mm, stamping speed 1100 hits/min, max positioning speed x/y 80/160, simultanious 100m/min, Siemens 840D, - scrap conveyor SC1T - Lifting scrap conveyor SC2 - Sheet lubrication, - Tool lubrication - Light guards 5 - safety net LD3000 - GSM Alarm - RS scrap conveyor - Lifting scrap conveyor RSC2 - tool adjust ACS - C1500 sorting belt conveyor - STS 3015 stacking system. - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: 45.000 - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Axis speed [X axis] max: 150 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness ...

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Control generation: EKC2 (knitelligence® generation) Multi-touch panel: Yes Working Width: 50" / 127 cm Knitting and transfer systems: 3 (front/back) Spacing between systems: 5" fine mesh (E10-20; E6.2-10.2) 5.2" coarse mesh (2.5.2-5.2; E5-8) Machine dimensions: Length 3080 mm / Depth 1203 mm Supply voltage: Flexible power supply (AC 230V/400V +/-10%) Yarn guide: Direct (from above) Yarn carrier: 16/24/32 all in one Yarn Control Units: 16/24/32 Clamping and cutting device: 8/12/16-speed left/right Take-off system: Multiflex + auxiliary + comb or Ribbon with comb Innovation Packages: - Improved central lubrication Oil Collection Tank Switch for forward and backward rotation of the belt pick-up system Mirrors in the fabric storage area for Strip Removal Machines Lighting in the fabric storage area Can-Open Feeder Wheel Interface Split stitch without exchan ...

Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...

Machining center, manufacturer: IMA, Type: Bima 610/V/DVK 140/500, Year of manufacture: 1999, Serial no.: 21740, Control NUM, Infeed roller conveyor, Drilling unit, (vertical/11 drilling spindles), Drilling unit (horizontal/4 drilling spindles), 18-fold tool turret, tool holder HSK 63, Main spindle with integrated NC tool rotation axis, speed max. 18,000 rpm, Strip gluing device IMA Quadroflex, saw unit with NC axis, router, 5 kW, in-line drill gear, flush milling adapter, switching measuring head, Outlet roller conveyor, safety fence system, sliding gates, (hammer bid is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be compared after the auction closes)

Amperage range maximum: 0 A Amperage range minimum: 0 A Table Length:        1.220mm Table Width:         1.220mm Table load on 50 mm: 5.000Kg Table load on 200 mm:4.545Kg Table load on 400 mm:3.500Kg Table load on 600 mm:2.900Kg Table load on 1000 mm:1.850Kg Rotation table:      360000° Length:              2.000 mm  Width:               1.600 mm  Height:              1.800 mm  Weight:              2.000 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Table  Ø:            1.500mm Table load on 50 mm: 5.000Kg Table load on 200 mm:3.000Kg Table load on 400 mm:1.000Kg Table load on 1000 mm:500Kg Rotation table:      0,06 - 1,65 ° Length:              2.300 mm  Width:               1.500 mm  Height:              2.000 mm  Weight:              2.500 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Load capacity per section:7.5 + 7.5 = 15 T Vessel range Minimum:    500Ø Vessel range Maximum:    4000Ø Variable rotation:       0,1 - 2000 mm Rpm No of wheels per section:2 Length:                  3.000 mm  Width:                   1.000 mm  Height:                  500 mm  Weight:                  2.000 kg 

Workpiece weight: 0 kg Table diameter: 800 mm Table  Ø:            600 + 800 mm Table load on 200 mm:650Kg Table load on 400 mm:200Kg Table load on 1000 mm:100Kg Rotation table:      0,076 - 1,5 ° Length:              1.200 mm  Width:               800 mm  Height:              800 mm  Weight:              500 kg 

METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...

Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1900 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 355 MACH-id    5029 MAKE         MECOF Italia TYPE            CS 88 G YOP              1991 SPECIFICATIONS X-Axis       4300 mm Y-Axis       1900 mm Z-Axis        1000 mm Table size Length x Width      6000 x 1000 mm Table load in kG     10.000 Kg kW power on spindle      20 kW Spindle speeds   1600 Rpm Spindle taper       50 ISO/Bt Feed rate X-Axis       6000 mm/M Feed rate Y-Axis         6000 mm/M Feed rate Z-Axis  & ...

Akar Makina Truck Builder Machine Model AKR172 Year 2021 Total power: 4.5 Kw Working pressure: 8 bar (120psi) Manual and automatic use TECHNICAL FEATURES PLC controlled precured tread builder for tyres 700 mm (27.5") -1450mm (57") with expandable hub and rim system User friendly easy operation Tyre range: 7.50 R 15 - 12.00 R 24 Expandable rim: 20-22.5x9" included (Other sizes are optional) Three-zone pneumatic pressure application feature Two-mode tire rotation with pedal control Adjustable speed control tread application on tires Controllable stitching and building operation with tread stretching Three-line optical laser centering system CE Certified

Stroke: 750 mm Make Atlas shaping Type W 7 Year shaping / kurzhobel hobel maschine Stroke = 750 mm X / Y = 490 x 500 Stroke tool holder = 175 Head rotation + / - 60 Gr.- Table = 560 x 480 - Speed 12 - 132 M/min

technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...

Workbench drilling machine FLOTT TB 6/I, II, III One-piece spindle - male cone B12 Manual spindle exit: 65 mm Speed: from 450 to 9000 RPM Throat depth: 160 mm Mini height in low position: 60 mm Max height in height position: 180 mm Head rotation around the column Voltage: 380 V Width: 300 mm Depth: 600 mm Total height: 700 mm Weight: approx 70 kg

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

Used, Year of Construction 2016 Offer Barth VacuuCar®+ with extra accessories from a part-time carpentry workshop for sale in top condition. The additional automatic shut-off system keeps the vacuum above a separate accumulator, so that work can be carried out without the noise of the pump in the case of dense plates. Vacuum pump for continuous operation 3m3 / h / 120 Watt with dust filters Foot valve for loosening the clamped workpieces Base frame with 90° rotation axis for vacuum cups 2 vacuum flat cups 900 mm / round, 250 x 80 mm with quick-change system Pull-outs on both sides + 450 mm 5 swivel support strips made of squared timber (wood/carpet) Integrated 3-way power strip for additional devices Hydraulic height adjustment with reversible hand crank 6-way adjustable bench hooks as a support Four castors, 2x brakeable and 2x with directional lock L x Br x H: 1350  ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

Specifications: - 2 mot. driven rollers - manual. Delivery of the top roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 132 mm - Bending performance - Flat steel upright 50 x 10 mm - flat 80 x 15 mm - Square 30 mm - Square tube 50 x 50 mm - Round tube 60 x 1.5 mm - Drive 400 V / 0.6 / 0.8 kW - with: - right / left - run - Standard bending set for flat and angle material - separate control panel - Weight approx. 200 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

The Model 360C Automatic Large Wire Bonder is a high-speed wire bonder for 5 to 20 mil (125 to 500 micron) wires on a variety of semiconductor and hybrid devices. The bonding head, controlled by a micro stepper motor, performs all the movements of the bonder. The range of motion is 5 inches on the X axis and +3 inches on the Y axis, 2 inches along the Z axis, and up to 200° in rotation (theta axis). The Model 360C can automatically bond up to 1,500 two-wire bonding wires in any direction onto virtually any wire-bondable electronic package. Almost all functions are programmable: pattern recognition, loop heights, stepback lengths, bond heights, gram strength, and bond time and power. A Motorola 68030 microprocessor controls all machine functions. They communicate with the control computer via a keyboard, a control panel and a data monitor. Menu-driven software guides you through the crea ...

min. grindable saw blade diameter:16 mm max. grindable saw blade diameter:315 mm chip pocket:16 mm stroke rate grinding carriage:90-135-200 min. grinding wheel diameter:160 mm grinding spindle speed:2800 u. 5200 U/min feed rate pro saw blade rotation:0,05; 0,10; 0,15; 0,20 mm 100 % before loading warranty: none one used circular saw sharpener make WMW-Königsee, type SWSK 315, year of production

Rotation diameter above the cross carriage: 254 mm Spindle cone: A2-6 11/15 kW on spindle Hydraulic chuck Chip conveyor belt Tools : 12 positions Dismantling + loading costs by professional dismantling team: 1500 euros

Max. turning diameter: 420 [mm], Max. diameter over cross slide: 280 [mm], max. turning length: 600 mm, Material clearance: 65 mm, Circulation diameter over radial slide: 280 mm, Circulation diameter above the bed: 420 mm, Spindle holder: A6 DIN 55026, Revolver: with 12 mounts, Rotation speed: 4000 [rpm], Spindle motor power: 15 [kW], Area requirement LxWxH: 3660/2335/2160mm, Weight: approx. 6.8 to. The additional costs are dismantling and loading costs.

Lathe Metal Lathe Model: Conventional Manufacturer: Colchester Type: Triumph 2500 Year of construction: 1991 Turning diameter: 400mm Turning diameter in gap bed: 630mm Diameter: 54mm Center distance: 1250mm Rotation speed: 15-2500 rpm Motor power: 7.5kW Machine weight: 2000kg Machine dimensions: 2600x1750x1350mm

Circular loom 250 Specifications: ModelFH 250 Number of shuttles 2 Sleeve diameter Up to 160 mm (optionally up to 250 mm) Maximum number of threads per warp 478 Material used Polyester threads Shuttle rotation speed (rpm) 150 (up to 204 max) Main engine power (KW) 5.5 Speed ​​control inverter Dimensions (mm) Φ 1800 X 950 Weight (t) 1.4

Set of tools included - Operating hours: 40.000 - Number of turret stations (pcs): 31 - Simultaneous positioning speed (X / Y): 89 m/min - Number of index tool stations, max: 3 - Tool rotation, max: 35 r/min - Control type: Fanuc 18P - Power supply: 25 kVA - Punch diameter max: 88,9 mm - Max. workpiece weight: 100 kg - Working area max: 2.540 x 1.270 mm - Punching force: 200 kN - Material thickness max: 6,4 mm - Compressed air consumption max: 4,16 l/s - Dimensions (long x wide x high): 5.030 x 2.630 x 2.160 mm - Weight: 9.200 kg

: gebraucht : 2017 : 3900 : China : 8490 € : 6800 € : 1 : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

Mini excavator XN12 Rhinoceros 3 Zyl. Kubota 10,2kW articulated arm NEW Description Articulated arm/Knickmatic incl. Bucket 400 mm -Roof and roll bar Tool -Hammer cable -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 Euro Bolt for quick coupler : 10 Euro Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro hydr. Hammer : 1780 Euro hydr. Earth drill : 680 Euro hydr. Bucket 600mm : 520 Euro hydr. Bucket 800mm : 590 Euro Load hook : 170 Euro Bucket 200mm : 205 Euro Bucket 400mm : 270 Euro Bucket 600mm : 310 Euro Bucket 800mm : 340 Euro Sale is made with invoice with VAT shown. 19% VAT included in the price. 015121271265 Model XN12 Fire RHINOCEROS Operating Weight 1080kg Digging bucket capacity 0.025cbm/120kg Digging bucket width 380mm Engine Kubota Rated power 10.2kw/2200 rpm Displacement 0.85 ...

60″ x .105″ x 20000Lb Strilich – Voss Cut to length line Make: Strilich – Voss Material Width: 12″ – 60″ Material Thickness: .020″ – .105″ Weight Capacity: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry 3-Arm Turnstile Powered Rotation ID Protective Bars Entry L-Type Coil Car Powered Lift & Traverse Self Contained Hydraulics Push Botton Controls Mandrel Uncoiler Powered Mandrel Expansion Powered Hold-Down Roll Sliding Base Feed-Up Motor Water Cooled Brake

bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 165 mm spindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/min table width: 742 mm table depth: 594 mm total power requirement: 2,2 kW weight of the machine ca.: 700 t Feed with electromagnetic feed clutch 0.1/0,2/0,3 right- and left rotation Cooling unit not available Table and Drilling Head height adjustable height adjustment of upper drilling unit: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 metrisch : 300 U/min. working area: max. 1050 mm engine output: 0,6 kW weight: 25 kg dimensions: 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Adjustable angle. Quick change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Optional: Clamping table with grooves, type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1100 mm; Working height: 140 mm; min. workpiece length: Height adjustment: electric; Workpiece thickness display: digital; Aggregates: 2; 1. Power unit: Contact roller unit steel; 2.Aggregate: Combi Aggregate (Roller/Shoe) Rubber Roller; Structure brush: Yes, brass; Abrasive belt dimension: 1120 x 2150; Motor power: 11kW; Current Consumption: A; Extraction connection: 3 x 160 mm; Machine length: 1500mm; Machine width: 1700mm; Weight: 1500; WORKING WIDTH mm 1100 SANDING BELT DIMENSIONS WIDTH x LENGTH mm 1120 x 2150 MAX MACHINING HEIGHT mm 160 CALIBRATION STEEL ROLLER Ã ̃ 150 Steel SANDING ROLLER WITH RUBBER COATING Ã ̃ 150 Rubber ABRASIVE BELTS MOTOR POWER HP 15 SANDING BELT SPEED m/sec. 18 - 16Application-controlled grinding pad VARIABLE FEED SPEED MOTOR POWER HP 0.75 FEED SPEED m/min. 4 / 20Â LIFTING THE WORK TABLE MOTOR POWER HP 0.33 SELF-CENTERING  ...

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

Line drilling machine make GILLARDONwith 4 drilling heads type R 20Fabr. -No: 0150262, 0150263, 0150264, 0150265,Technical specifications:Drilling capacity GG: 25 mmSpindle mount: MK 2Quill stroke: 150 mmProjection: 285 mmColumn diameter: 105 mmMotor power per drill head: 0.5 / 0.9 kWWork table size approx .: 1600 x 400 mm15 spindle speeds: 200 - 4500 rpm.Overall external dimensions L x W x H: 1600 x 800 x 1800 mmWeight approx: 1700 kgWith- 1 drilling head with right-left rotation- 4 x drill chucks- each drill head individually adjustable in height and can be swiveled around the column- separate coolant deviceused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

max. tool diameter: 400 mm : 310 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 751Serial -No: 84119, year of construction 1984Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 245 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 5 m/minTravel per handwheel rotation Position 1/ 25.5 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely variable speed: ...