rotation used for sale

Reimelt RS2A Inline sifter Rotation sifter for sifting out impurities, breaking lumps and aerating the product, previously used to sift high volumes of flour

Technical data of the used Calandra Sertom EMO 31-25: - Upper roller table length: 3100 mm - Side roller table length: 3100 mm - Upper roller diameter: 400 mm - Side roller diameter: 350 mm - Maximum opening between rollers: 75 mm - Maximum load on the upper roller: 1950 KN Roller rotation speed: 2,5-5 m/min Weight: 17000 kg Machine dimensions: 5800x2350x1800 (H) mm

Stock# U2417-1 Used universal mixer/cutter by Robot Coupe (FR) model R60. Machine has stainless steel mixing bowl with internal dimensions: diameter 45 cm x length of straight side 38 cm. Total volume 60 l. Working output - maximal batch for emulsifing 36 kg, maximal batch for chopping - up to 25 kg, maximal batch on dough (60% hydrated) - up to 30 kg. Machine has bottom driven shaft with three cutting curve knives. Shaft is driven by 11 kW el. motor. Working rotation speeds - 1500 rpm and 3000 rpm. Working time cycle adjustable from 1 to 4 minutes. Top is covered with polycarbonate lid, closed on clamp. Missing lid wiper. Manual tilt discharge. Machine is mounted on stainless steel supporting frame. Last time used in food industry

SCHMALTZ RGK 1100/6000 Crankshaft Grinding Machine Technical Details : Max.Workpiece Length :8000 mm Grinding Diameter: 1100 mm Grinding Wheel Diameter:1300 mm Grinding Motor : 25 PS Crankshaft Radius Max: 300 mm Cr8zr7tiq2 Workpiece Weight:2500 Kg Clamping Diameter: 100-250 mm Rotation Speed : 400 to 500 U/Min Workpiece Speed:10-14-20 U/min Slide Speed: 50 to 600 mm/min

x-travel: 510 mm y-travel: 510 mm z-travel: 460 mm control: Mazatrol Fusion 640M Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 22 / 15 kW tool taper: ISO 40 Spindle diameter: 80 mm Accelaration: 0 - 12.000 min/-1 : 1,7 sec table surface area: 500 x 400 mm T-slots: 5 x 18 mm T-slot - distance: 80 mm distance spindle /table: 190 - 650 mm max. workpiece height: 500 x 500 x 405 mm max. table load: 300 kg Swivel range A-Axis: +30 / -120 ° rotation range c-axis: +/- 360 ° Tool-Presetter:: number of toolpositions: 40 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg change-time chip to chip: 4,5 sec feeds:: feed speeds: X/Y/Z: 1 - 50.000 mm/min rapid traverse: X/Y/Z: 50 m/min Indexing: A + C: 0,001 ° switching time: 90°: A/C: 1,9 / 1,5 sec total power requirement: 51 kVA weight of the machine ca. ...

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

PRICE: € 34.000,00 + VAT. Used ANAYAK VH 2200 milling machine Specifications: X axis: 2000 mm Y axis: 920 mm Z axis: 900 mm CNC: Heidenhain 426 Table dimensions: 2200x750 mm Table capacity: 3500 kg Spindle rotation speed: 3000 rpm Maximum power: 33 kW Motor power: 30 kW Machine equipped with 6 x 18 mm T-slots T-slot spacing: 120 mm Tool holder type: ISO-50 Chip evacuator Machine dimensions: 4960 x 3535 x 3000 (h) mm Weight: 8000 kg Machine in good general condition available for immediate delivery unless sold. Accessories in photos not included.

Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...

Material thickness: 20 mm Punching capacity: 20 t Stroke: 20 mm Throat: 20 mm Cast iron face plate diameter 800 mm Double suppport rolling slide NC Positioning over digital readout Rotation face plate 0 - 10 U/Min For HOT & Cold bending jobs Hardned & Grounded guideways Horizontal and vertical:Vertical Number of rolls:       2 Stroke X-Axis:         770mm Resistance moment:     40CM³ Capacity flat:         80 x 20mm Capacity bar:          65mm Capacity T-Profile:    100mm Working speed:         0-10mm/min. Adjustment siderolls:  200 Control:               P2000M Length:                2800mm Width:        ...

Spindle swivel: Yes -45 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Stop adjustment: manual; Height indicator: mech. Counting display; Swivel angle indicator: mech. Counting display; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 ...

Roles: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of force clockwise and anticlockwise rotation Including tripod, individually swivelling and adjustable for horizontal and vertical use Eight speeds possible, speed selection via switch and variable gearbox

Baumann pile turner BSW3-1000 for stationary use Year 1995 manual rotation The pile turner can only rotate. A repair is necessary for the ventilation and jogger functions. format: 750 x 1100 mm Maximum load: 10,000 N Minimum opening width: 600 mm Opening width max.: 1,390 mm

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

PROMA FVV-135PD universal milling machine was built in 2018 in the Czech Republic. The highly reliable machine with a rigid construction is designed for precise machining of workpieces both vertically and horizontally, thanks to the vertical and horizontal spindle with an ISO 40 taper. The milling process is performed in the X,Y,Z axes on a fully illuminated working area with dimensions (L x W) of 1320 x 320 mm. The milling machine is additionally equipped with, among others, a SINO digital readout and cooling. The total weight of the machine is 2100 kg. Technical data of the PROMA FVV-135PD milling machine - work table size (L x W): 1320 x 320 mm - axis work feed: X,Y,Z - feed of table in X/Y axis: 1000/300 mm - rotation angle of rotary head: 360° - maximum vertical milling diameter: 25 mm - maximum horizontal milling diameter: 125 mm - maximum milling head diameter: 125 mm  ...

Piston compressor of the professional company J. P. Sauer & Sohn GmbH Product No.: 300L-100 Year of Build: 1998 1470 rpm Direction of rotation: right Capacity: 255 m3 / h Pressure: 40 bar Power requirement: 55 kW Mileage: 21.475 hours .

Flowpack machine Flow-wrapping machine Manufacturer: Type: DIBIFLOW 500 Year of construction: 2022 Horizontal rotating packaging machine with spool from above Cantilevered structure in aluminum and painted steel (RAL 7035 GREY – RAL 5002 BLUE) and stainless steel housing AISI 304 stainless steel parts that come into contact with the product Adjustable support legs Side-adjustable guides Studded loading belt, length 1600 mm (standard) Pressure lugs with fast extraction in plastic material suitable for contact with food Longitudinal welding machine with two pairs of wheels Diameter 120 mm the first cold to pull the second hot for welding Single-sector turnstile welding machine with a width of 240mm Independent temperature adjustment (cross welder and longitudinal welding wheels) Electronic safety coupling on the transverse welders Tunnel / film conformer with ...

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6,0 - 8,0 bar total power requirement: 1,4 / 1,9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - Pneumatic quick clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously dimensioned gears - with Eisele rotation compensation for a long saw blade service life - Co ...

thread dia.: M5 - M24 metrisch : max. 200 U/min. working area: max. 1200 mm engine output: 1,2 kW weight: 25 kg dimensions: 740 x 800 x 400 mm Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50

Four roll plate bending machine 2000 x 5 mm • mechanical dual prepinch • Model MCA2016 DAVI • Plate width 2000 mm • Capacity thickness 5 mm • Pre-bend 4 mm • Mechanical side rolls driven on linear guideways • Top roll 160 mm - lower roll 150 mm • Hydraulic rotation 4 hp • Conical plate bending with side rollers tiltable • Drop end front open hydraulic • Console electric control

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

3-roll bending machine SCHÄFER type SRMVS Masch. Nr. Year of manufacture: 1973 , sheet length: 2000 mm, sheet thickness: 16 mm, top roll, diameter 250 mm, bottom roll, diameter 230 mm , roll speed 7 rpm. Rolling speed approx. 5 meters min. Mains connection 380 volts, 50 Hz. - all 3 rollers driven - symmetrical roller arrangement - motorized upper roller adjustment- conical bending via inclined adjustment of the upper roller with coupling for one-sided adjustment - lateral start-up for conical bending - motorized lower roller adjustment , individually for the front and rear roller- right and left rotation via control button in the control panel - swing-out hinged bearing and spindle support to relieve the upper roller Dimensions L x W x H 4200 x 1900 x 2200 mm Weight 10.6 ton. good condition; used

- Working range pipe Ø 20 to 60.3 mm (wall thickness 2.3 mm / mild steel) - Preselection 4 bending angles by rotary control - Bending, deburring - Pipe extension length 4,500 mm - Rotation angle unit manual - Spine retreat

CNC TURNING CENTER Condition Used Very good condition Control type Siemens Sinumerik 828D Maximum workpiece vaulting Ø 750 mm Max. workable diameter Ø 500 mm workable length 1.260 mm Turning diameter from bar max. Ø 90 mm Self-centering diameter Samchully Ø 315 mm Spindle hole Ø 102 mm Spindle speed 3,000 rpm Motor power 22/18,5 Kw X Shaft Stroke 335 mm Z Axis Stroke 1.350 mm Rapid feed X-Z 20-24 m/min Axis C 0,001° Tool turret 12 positions Motorized unit rotation speed 4,000 rpm MT5 tailstock cone Steerer diameter Ø 100 mm Tailstock stroke 1.350 mm Chip Evacuator Accessories

diameter of brush: 250 mm width of brush: 80 mm turning speed range: 1500 / 3000 U/min voltage: 380 Volt total power requirement: 2,0 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9238987 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 450 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 250 mm Vertical Z: 250 mm Positions ATC: 12   Positions APC: 2   CNC Brand: Fanuc 3-axis CNC machine (VMC)CHIRON - FZ08W MACH-ID 7652 Make: CHIRON Type: FZ08W Control: Fanuc 21-M Year: 1998 Pallet changer 2 tables 450 x 300 x 75 Kg Workpiece rotation station 180 Gr Large Tooling package HSK-32 Coolant system 100 Liter X - Travel:              300mm Y - Travel:              250mm Z - Travel:              250mm Table Length:            450mm Table Width:             300mm Table load:              75 Feed rate X-Axis:        40000mm/min. Feed rate Y-Axis:    &nbs ...

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 495 mm table load: 300 / 150 Kg swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: 0,5 - 3,2 U/min spindle bore: 65 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swivel rotary table Ø 1000 mm Shelf diameter: Ø 1000 mm x height 650 mm Rotation at 360° Vertical swivel Weight: approx 650 kg

Offer 23130 Specifications: - Total payload driven + moving unit 60000 kg - Load capacity per container 30000 kg - Workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers - Roll diameter 480 mm - Roll width 100 mm - infinitely variable rotation speed - Hand-held remote control for re- and Li. run - Drive 400 V - driven with motorized rail chassis - Space requirements Unit approx. W 4000 x H 1140 x D 1800 mm - Platzb. with running unit approx. W 3500 x H 1100 x D 1400 mm - Weight tr. Unit approx. 4800 kg - Weight with running unit approx. 3500 kg

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

Offer 22336 Specifications: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rollers - Roll diameter top / bottom 205 / 185 mm - Working speed m/min - Drive – brake motor 400 V / 7.5 kW - Space requirement approx. W 5500 x D 1400 x H 1300 mm - Weight approx. 4.7 t - with - bend - Rear roller can be tilted, - Hinged bearing for swinging out the top roller - Extended roller ends for placing profile rollers - Right + counterclockwise rotation - Separate control panel

Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...

Automatic Band Saw BOMAR Maxi diameter: Ø 250 mm Hydraulic clamping of the chuck Straight and angular cut Automatic descent Possibility to work manually or auto 2 rotation speeds of the blade Lubricant pump Voltage: 380 V Length: 2000 mm Depth: 1800 mm Total height: 1800 mm Weight: approx 1,5 T

Band width: 150mm; Table size: approx. 2500mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3400mm; Machine width: 1200mm; Weight: 400kg; Robust design also allows the machining of longer workpieces grinding unit swivels, thus can also be used as an edge grinding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the abrasive belt High belt speed of 17 m/s right-counterclockwise rotation Upper sanding sole with graphite coating 4-ply sprung sanding pad With movable sanding pad for oblique surfaces Smooth-running grinding table even under high loads due to heavy workpieces Optimal price-performance ratio

CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...

Mini Excavator Windstorm XN10 Rhinoceros Diesel Excavator FROM STOCK Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. available with articulated arm. Surcharge 720 euros. incl. Shovel 400mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 85 ...

Mini excavator Windstorm XN10 Knickarm/Knickmatic from stock new Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. Articulated arm / articulated mates from stock Book available incl. Shovel 400 mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 850kg ...

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...

Laser source: Raycus 3kW Laser head: Raytools autofocus Servo systems: Yaskawa System: FSCUT 5000 A Loading: Bundle loading Length: 7000mm loading, 5000mm unloading Chuck diameter: 15-230mm Unloading belt 1+3m, distance 3m Software: CAD Tubest, CAM Tube Pro Positioning of axes: ±0.05/1000mm Repeatability: ±0.03/1000mm Acceleration: 1m/s² Max. operating speed: 75 m/min Max. rotation of the feed: 100 rpm Max. weight: 120 kg Power requirement: 360V/50Hz ±10% Optional elements: Semi-automatic loading system Automatic loading system Bevel head Weld seam detection Conveyor belt unloading device Extension for unloading (+7000mm) Raybox (control with improved functionality)

Drilling capacity in steel 45 mm Tool holder MK 4 Coolant pump Clockwise and counterclockwise rotation Electromagnetic feed in 3 different speeds

Max. bending length: 2040 mm Max. sheet thickness: 1.25 mm steel Clockwise and counterclockwise rotation via foot switch 3-roller drive Safety pull switch Conical rounds possible

Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Motorized rear roller infeed Safety kill switch Conical rounds possible

Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Stock # UG6362 Used fully design in stainless steel 316L chamber bowl type, hi-speed centrifuge made in China, type GQ115. Working rotation of bowl up to 16300 rpm with 17000 G-force. Total volume of bowl is 7 l. Centrifuge has bottom inlet and top discharge outlet. Bowl is belt driven by ele. motor 3 kW, 2880 rpm, 380 V, 50 Hz. Machine is equipped with an electric control panel, tools, concrete pedestal. Overall dimensions: length 900 mm, width 900 mm, height 1600 mm, weight 490 kg.