rolling mill 400 used for sale

- for Walterwerk Kiel Jupiter baking oven - for different angles and cone lengths

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Surface-mounted luminaire, industrial lamp, wall and ceiling lamp SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Surface-mounted luminaire, industrial lamp, wall and ceiling luminaire, with emergency luminaire SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Control box, pre-wired PAGUS 400 x 400 x 200 mm 4x push button 1x toggle switch 4x indicator lights 1x power contactor 1x power contactor with auxiliary switch and thermal motor contactor 3x miniature circuit breaker control box: 400 x 300 x 200 mm used, checked! Dimensions: 420 x 300 x 240 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 400 x 400 mm Working height: 60 mm Groove width: 14 / 24 mm Dimensions: 400 x 400 x 60 mm

XY table, machine table, milling table DECKEL Working area: 400 x 400 mm for KF12 stroke: 50 / 50 mm plate thickness: 30 mm groove width: 12 / 21 mm used ! Dimensions: 560 x 440 x 125 mm

Pneumatic cylinder FESTO DNGU-32-400-PPV-A S3 158098 stroke: 400 mm rod diameter Ø 12 mm Dimensions: 545 x 95 x 50 mm used tested.

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm working height: 115 mm all threads on clamping surfaces M12 x 1,75 Pitch: 50 mm holes ( top ): Ø 20 / 50/55 mm holes ( bottom ): 2x Ø 25 mm width guide ( bottom ): 160 / 200 / 300 mm Height guide (bottom): 55 / 30 / 65 mm spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 550 x 400 x 115 mm

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes (top): Ø 20 / 50 mm holes (bottom): 1x Ø 32 mm, 2x Ø 25 mm, 3x Ø 18 mm bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm used, tested ! Dimensions: 490 x 400 x 95 mm

Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm

Pneumatic cylinders, round cylinders, double-acting NORGREN RA/8063/M/400 stroke: 400 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.20 5, Length: 30mm pmax: 1.0 -16.0 bar New ! Dimensions: 600 x 76 x 76 mm

Pneumatic cylinder NORGREN RA/8160/M/400/H stroke: 400 mm Rod diameter: Ø 40 mm pmax: 16 bar Pivot: Ø 40 mm New Dimensions: 750 x 280 x 180 mm

Pneumatic cylinders, standard cylinders FESTO DNG-40-400-PPV-A 36343 DSBG-40-400-PPVA-N3 1646557 stroke: 400 mm rod diameter: Ø 16 mm pmax: 12 bar New ! Dimensions: 565 x 55 x 55 mm

pneumatic cylinder, standard cylinder, double-acting, with flexo coupling FESTO DNC-50-400-PPV-A 163379 stroke: 400 mm rod diameter Ø 20 mm rod thread: M16 x 1,5 pmax.: 12 bar with flexo coupling FK-M16X1,5 used, tested ! Dimensions: 740 x 65 x 65 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-40-400-PPV 163361 stroke: 400 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax: 12 bar spare part for machining center HECKERT CWK400 D !, among others! used, tested ! Dimensions: 565 x 54 x 54 mm

Linear actuator FESTO DGPL-40-400-PPV-A-B-KF-GK-SH 175136 stroke: 400 mm piston diameter: Ø 40 mm Carriage: 167 x 82 mm pmax: 8 bar New ! with documents ! Dimensions ( Linear actuator ): 700 x 97 x 91 mm Dimensions ( packaging ): 730 x 200 x 150 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 400 x 400 mm height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate HAHN & KOLB, IFA ASCA Working surface: 400 x 400 mm DIN 876 height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

fitting to Orion or Zenit filters, without seals Number available (price per tank): 70 material: NORYL  40x 40 customs no.: 84212200 More then 300 machines new and second hand on our seema .de

Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-400-PPV-A 163315 1376429 piston diameter: Ø 32 mm stroke: 400 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 625 x 45 x 100 mm

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Berstorff Cracker Mill with Roll dia 600 x 800mm Description attached!

Berstorff Cracker Mill, Excellent condition, Length of roller 600mm, Roller diameter 430mm, Rubber mill weight 10 tons, Width 2150 mm x 4200 mm long x approx 1800 mm high, The Following work has been completed: New plain bearings, New Roller ribbing, New Roller ground, New Grease pump, brake cylinder, New Safety bars, New Conveyor,

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Rolling Mill for REBAR and WIRE, cap. 350.000 - 400.000 TPY YOM: 1981 The Mill consists of: • (4) Roughing Mill Stands (1-4) • (4) Intermediate Stands (5-8) • Shear • (4) Intermediate Stands (9-12) • (4) Finishing Stands (13-16) • Split Rebar (A)/Bar (B)/ Wire (C) • Shear • (6) Finishing Stands Rebar (17-22) • Shear • Coolant Bed • (8) Finishing Stands Wire (17-24) Upgrades have been done.

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop