british flag
Resale Logo

roll used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information every type of foil wrapping system  BluePack Machines GmbH  http://www.amtec-machines.com 
banner logo
start page > keywords roll > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125832687 802

RYOBI 522GE for sale


Printing machine - Two Colour Ryobi Model 522GE Year 2012 Impressions 1 million Maximum sheetsize 375 x 520 mm Dampening Ryobimatic film dampening Details Suction tape in feeder, Semi auto plate change, plate cock ...
used machine
 
Printing machine - Two Colour
Ryobi
Model 522GE
Year 2012
Impressions 1 million
Maximum sheetsize 375 x 520 mm
Dampening Ryobimatic film dampening
Details Suction tape in feeder, Semi auto plate change, plate cocking, blanket + roller wash, sliced ink ducts
Condition as really as new
Available Direct
2012
Price  
  NL   request
125837273 109

AJAN SHP 260A for sale
Plasma cutter AJAN


Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cut ...
used machine
 
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.
2015
34,500 EU?  
  PL   request
125832677 842

PB+E HD-025 for sale
Embossing foiling press


Embossing / foiling press PB+E Model HD-025 Year 1985's Max size 250 x 100 mm Pressure up to 2.5 tons Foiling 1 foil pulls Operation semi automatic Details Interfal controlled, embossing time controlled, temperat ...
used machine
 
Embossing / foiling press
PB+E
Model HD-025
Year 1985's
Max size 250 x 100 mm
Pressure up to 2.5 tons
Foiling 1 foil pulls
Operation semi automatic
Details Interfal controlled, embossing time controlled, temperature controlled
Available direct

1985
Price  
  NL   request
125832729 109

COSMAP 2 TR 3/4 C.S.D. for sale
Polishing Automatic


stations: number of slitts: length: mm--------------------------------------------------: ELECTRICAL SPECIFICATIONS: - mains voltage: 380 V- mains frequency: 50 HzThe equipment includes:autorotor table  ...
used machine
 
stations:
number of slitts:
length: mm
--------------------------------------------------:
ELECTRICAL SPECIFICATIONS:
- mains voltage: 380 V
- mains frequency: 50 Hz
The equipment includes:
autorotor table TR35 - 03 - 270°
table reductor MVR 7 FL1
TABLE MOTOR AUTOF. KW 0.75
N° ROLLS OF THE TABLE N° 6 DIAM 30 MM
CLUTCH SETTING 12
SAFETY FENCE ARGOLUX
TABLE DIAMETER 840 MM
TABLE DECELERATOR 0EM10MB
CONTACT WHEEL DIAMETER 250 MM
DRAWING ROLL DIAMETER 300 MM
IDLE ROLLS DIAMETER 180 MM
STRIP TENSIONER MOTOR KW 2.2
MANDREL TYPE MOTOR DCM3C
MANDREL DRIVE DCD 60
MANDREL ENCODER DIAMETER 15 MM
POSITIONER GROUP CYLINDER STROKE 10 MM
COLUMN MOVEMENT MOTOR KW 0.75
LINE AIR PRESSURE 6 BAR



This ad was created with MODUL MWS - the software solution of LogoTech.
2000
Price  
    request
125828718 1300

SULFURIC ACID PLANT 1500 MT New Surplus for sale
other machines


Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate con ...
new machine
 
Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus
The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler
The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics:
Type Dry bulk solid powder
Sulphur > 99.5 % w/w
Inorganic ash < 0.4 % w/w
Carbon < 0.1 % w/w

All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost.
The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed.
The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.
new
Price  
  US   request
125832735 110

SARONNI 45/S for sale
coil line


material width: 400 mmcoil weight: 3 tmaterial thickness: 4 mm--------------------------------------------------: DECOILER: - sheet width max: 400 mm- max. weight of coil: 3 to- max. diameter of co ...
used machine
 
material width: 400 mm
coil weight: 3 t
material thickness: 4 mm
--------------------------------------------------:
DECOILER:
- sheet width max: 400 mm
- max. weight of coil: 3 to
- max. diameter of coil: 1200 mm
LEVELLER UNIT:
- sheet thickness max: 4 mm
- number of leveller rolls: 4



This ad was created with MODUL MWS - the software solution of LogoTech.
1975
Price  
    request
125823289 209

MAGGI STEFF 2032 for sale
Automatic power-feeder for hobby MAGGI STEFF 2032


Automatic power-feeder for hobby MAGGI STEFF 2032 nr. 3 rollers d. 80 mm. nr. 4 speeds CE

 
Automatic power-feeder for hobby MAGGI STEFF 2032
nr. 3 rollers d. 80 mm.
nr. 4 speeds
CE
 
Price  
  IT   request
125832743 102

GILDEMEISTER TWIN 500 for sale
CNC Turning- and Milling Center


turning diameter: 390 mmturning length: 1850 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 1 - number of c-axes: 2  ...
used machine
 
turning diameter: 390 mm
turning length: 1850 mm
control:
--------------------------------------------------:
BASIC FUNCTIONS:
- number of spindles: 2
- number of turrets: 1
- number of c-axes: 2
- number of y-axes: 1
- number of b-axes: 1
WORKING RANGE TURNING:
- swing diameter (max): 610 mm
- turning diameter (max): 390 mm
- worpiece length (max): 1850 mm
MAIN SPINDLE:
- spindle revolutions (min): 20 /min
- spindle revolutions (max): 3200 /min
- drive power: 69 kW
- spindle torque: 1080 Nm
- spindle bore diameter: 118 mm
- c-axis: yes:
COUNTER SPINDLE:
- spindle revolutions (min): 20 /min
- spindle revolutions (max): 3200 /min
- c-axis: yes:
X/Z SLIDE:
- Y-axis travel: 210 mm
- rotating range B-axis up to: 240 °
- rapid traverse Z: 46 mm/min
- rapid traverse X: 60 mm/min
- number of tool positions (total): 92
- - rotation speeds (max): 4000 /min
- - drive power: 10 kW
TOOL MAGAZINE:
- magazin type: chain magazine:
- number of positions: 80
ELECTRICAL SPECIFICATIONS:
- total power consumption: 180 kW
DIMENSIONS / WEIGHTS:
- space requirements -left/right-: 8000 mm
- space requirements -front/back-: 4000 mm
- total height: 3200 mm
- total weight approx.: 18500 kg
ATTACHMENTS (TURNING):
- chip conveyor: yes:
- coolant unit: yes:
Equipment:
-Main and counter spindle as integrated spindle motor
-Differential pressure for main and counter spindles
-separate speed limiting device for power chuck
-Tool magazine 40x
-Three-jaw power chuck with bore and quick-change jaw system FNC 250-72 Fabr.
-Forkard, incl, attachments for main spindle
-Recording for counter spindle
-Spindle flange with MKS holder and rotating tailstock tip
-In-process probe Fabr. Marposs
-Blasluft controlled as an alternative to the coolant
-Doppelspannzylinder
-The controllable setting force of the counterspindle for the tailstock operation takes place via the programming function 11 Travel to fixed stop
-Measuring cycles: It is possible to measure with a probe on the C axis.
-The 5-axis simultaneous movement programs the axes: x, y, z, C and B.
-4-Strip Bed - Rolling guides
-Kuehlmittelspritzpistole
-Compact filter requirement lnterlit
-Additional coolant pump, 80 bar, for upper tool carrier
-Späneförderer
-Ethernet interface



This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
125823288 102

SCHAUBLIN 135 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Toolroom lathe Schaublin 135 Centre distance: 630mm Centre height: 135mm Spindlebore: 40mm Spindelspeeds: 45-3000 With a set of C5 collets Scroll chuck 160mm with inner and outer jaws Multifix A QC ...

 
Toolroom lathe Schaublin 135
Centre distance: 630mm
Centre height: 135mm
Spindlebore: 40mm
Spindelspeeds: 45-3000
With a set of C5 collets
Scroll chuck 160mm with inner and outer jaws
Multifix A QCTP with 4 toolholders
Powerfeed
Tailstock
Spindlespeed adjustable over variator
Spindlenose Camlock D1-4
No brake
 
10,500 €  
    request
125832745 102

GILDEMEISTER TWIN 500 for sale
CNC Turning- and Milling Center


turning diameter: 290 mmturning length: 1850 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 1 - number of c-axes: 2  ...
used machine
 
turning diameter: 290 mm
turning length: 1850 mm
control:
--------------------------------------------------:
BASIC FUNCTIONS:
- number of spindles: 2
- number of turrets: 1
- number of c-axes: 2
- number of y-axes: 1
- number of b-axes: 1
WORKING RANGE TURNING:
- swing diameter (max): 610 mm
- turning diameter (max): 290 mm
- worpiece length (max): 1850 mm
MAIN SPINDLE:
- spindle revolutions (min): 20 /min
- spindle revolutions (max): 3200 /min
- drive power: 69 kW
- spindle torque: 1080 Nm
- spindle bore diameter: 118 mm
- c-axis: yes:
COUNTER SPINDLE:
- spindle revolutions (min): 20 /min
- spindle revolutions (max): 3200 /min
- c-axis: yes:
X/Z SLIDE:
- Y-axis travel: 210 mm
- rotating range B-axis up to: 240 °
- rapid traverse Z: 24 mm/min
- rapid traverse X: 60 mm/min
- number of tool positions (total): 92
- - rotation speeds (max): 4000 /min
- - drive power: 10 kW
TOOL MAGAZINE:
- magazin type: chain magazine:
- number of positions: 80
ELECTRICAL SPECIFICATIONS:
- total power consumption: 180 kW
DIMENSIONS / WEIGHTS:
- space requirements -left/right-: 8000 mm
- space requirements -front/back-: 4000 mm
- total height: 3200 mm
- total weight approx.: 18500 kg
ATTACHMENTS (TURNING):
- chip conveyor: yes:
- coolant unit: yes:
Equipment:
-Main and counter spindle as integrated spindle motor
-Differential pressure for main and counter spindles
-separate speed limiting device for power chuck
-Tool magazine 40x
-Three-jaw power chuck with bore and quick-change jaw system FNC 250-72 Fabr.
Forkard, incl, attachments for main spindle
-Recording for counter spindle
-Spindle flange with MKS holder and rotating tailstock tip
-In-process probe Fabr. Marposs
-Blasluft controlled as an alternative to the coolant
-Doppelspannzylinder
-The controllable setting force of the counterspindle for the tailstock operation takes place via the programming function 11 Travel to fixed stop
-Measuring cycles: It is possible to measure with a probe on the C axis.
-The 5-axis simultaneous movement programs the axes: x, y, z, C and B.
-4-Strip Bed - Rolling guides
-Kuehlmittelspritzpistole
-Compact filter requirement lnterlit
-Additional coolant pump, 80 bar, for upper tool carrier
-Späneförderer
-Ethernet interface



This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125823277 201

DIMTER 1113 for sale
Double mitre saws


Automatic double mitre cut saw – Coffin saw DIGO DIMTER with controll system and drilling units type: 1113 version CNC machine length 4000 mm x machine width 2620 mm work area length max. approx. 2600 mm worki ...

 
Automatic double mitre cut saw – Coffin saw DIGO DIMTER
with controll system and drilling units
type: 1113 version CNC

machine length 4000 mm x machine width 2620 mm
work area length max. approx. 2600 mm
working width max. approx. 800 mm
CNC version
pneumatic clamping of the work piece
saw motors each 3 kW = 6 kW
adjustment of wood length 0,7 kW
adjustment of wood thickness 0,7 kW = 1,4 kW
saw arm moving sidewards 0,18 kW = 0,36 kW
saw motor tilting 0,18 kW = 0,36 kW
motor drilling units 0,36 kW = 2.16 kW
3 drilling units from bottom each with 2 drills
lift movement and drive of the drilling spindles pneumatic
tool chuck 1 – 13 mm
sawmotor adjustable manual or motoric

weight of the machine 3000 kg
weight of the switch cabinet 300 kg
 
Price  
    request
125832761 102

GILDEMEISTER GMX 500 linear for sale
CNC Turning- and Milling Center


turning diameter: 390 mmturning length: 1850 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 2 - number of c-axes: 2  ...
used machine
 
turning diameter: 390 mm
turning length: 1850 mm
control:
--------------------------------------------------:
BASIC FUNCTIONS:
- number of spindles: 2
- number of turrets: 2
- number of c-axes: 2
- number of y-axes: 1
- number of b-axes: 1
WORKING RANGE TURNING:
- swing diameter (max): 610 mm
- turning diameter (max): 390 mm
- worpiece length (max): 1850 mm
MAIN SPINDLE:
- spindle revolutions (min): 20 /min
- spindle revolutions (max): 3200 /min
- continuous speed variation: yes:
- drive power: 69 kW
- spindle torque: 1080 Nm
- spindle bore diameter: 118 mm
- c-axis: yes:
COUNTER SPINDLE:
- spindle revolutions (min): 20 /min
- spindle revolutions (max): 3200 /min
- c-axis: yes:
X/Z SLIDE:
- Y-axis travel: 210 mm
- rotating range B-axis up to: 240 °
- rapid traverse Z: 46 mm/min
- rapid traverse X: 60 mm/min
- number of tool positions (total): 92
- - rotation speeds (max): 4000 /min
- - drive power: 10 kW
TOOL MAGAZINE:
- magazin type: chain magazine:
- number of positions: 80
ELECTRICAL SPECIFICATIONS:
- total power consumption: 180 kW
DIMENSIONS / WEIGHTS:
- space requirements -left/right-: 8000 mm
- space requirements -front/back-: 4000 mm
- total height: 3200 mm
- total weight approx.: 20000 kg
ATTACHMENTS (TURNING):
- chip conveyor: yes:
- coolant unit: yes:
Equipment:
-Main and counter spindle as integrated spindle motor
-Differential pressure for main and counter spindles
-Tool turret below with CAPTO System 12 fold
-Tool magazine 40x
-Treibacken power chuck for main spindle
-Doppelspannzylinder
-The controllable setting force of the counterspindle for the tailstock operation takes place via the programming function 11 Travel to fixed stop
-Measuring cycles: It is possible to measure with a probe on the C axis.
-The 5-axis simultaneous movement programs the axes: x, y, z, C and B.
-4-Strip Bed - Rolling guides
-Kuehlmittelspritzpistole
-Additional coolant pump, 80 bar, for upper tool carrier
-Späneförderer
-Ethernet interface



This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
125823223 107

MICROSTEP MG 120001.35 Prk for sale
CNC Plasma Cutting Machines


cutting speed: 420 m/min, track width: 3900 mm, table size L: 12000 mm, table size W: 3500 mm, brand and model plasma unit: Hypertherm HPR 260XD agc, max. cutting thickness: 150 mm, dimension L: 16500 mm, dimension W: 55 ...
used machine
 
cutting speed: 420 m/min, track width: 3900 mm, table size L: 12000 mm, table size W: 3500 mm, brand and model plasma unit: Hypertherm HPR 260XD agc, max. cutting thickness: 150 mm, dimension L: 16500 mm, dimension W: 5500 mm, dimension H: 2600 mm

with bevel cutting head 50° (5-axis NC controlled); control system MicroStep” type iMSNC, 1 standalone control panel, 2 digital control panels MSNC RO2; cabinet with various a.o. nozzles; (plasma power unit and 2 control cabinetslocated at 1st floor) (incl. new support strips for table)
2014
used machinery auction RESALE 40,000 €  
  NL   request
125832713 109

KROLLMANN ZE for sale
Auxiliary machines for drawing works


working range: 10 - 62 mmquality: hydraulisch FEEDING DEVICE for round hammer machineconstr.: Krollmannyear: 2004Hydraulical operated clamping- and feeding unit with material stopfor hammer-and reducing machines up to ...
used machine
 
working range: 10 - 62 mm
quality: hydraulisch
FEEDING DEVICE for round hammer machine

constr.: Krollmann
year: 2004
Hydraulical operated clamping- and feeding unit with material stop
for hammer-and reducing machines up to 62 mm material diameter.

clamping force: up to max. 37 000 N variable
feeding power: up to 27000 N max., variable
feed: max. 800 mm
pointing length: 250 mm

complete with:
- seperate hydraulic power unit
- motor power: 15 kW, 400 V, 50Hz
- electrical cabinet
- command desk
- additionally one sound isolating cabin for a hammer machine

Total weight: approx. 2 to.




This ad was created with MODUL MWS - the software solution of LogoTech.
2004
Price  
    request
125823206 307

FRANCIS SHAW 90mm Pin Barrel for sale
Rubber extruders


Francis Shaw Pin Barrel Extruder Screw diam. 90mm LD ratio 16:1 Roller feed Barrel jacked / pinned Clamp swing bolt DC drive motor 63kW 1750rpm 45volts, 3 phase, 50 cycles Complete with Panel and 4 x temperatur ...

 
Francis Shaw Pin Barrel Extruder
Screw diam. 90mm
LD ratio 16:1
Roller feed
Barrel jacked / pinned
Clamp swing bolt
DC drive motor
63kW
1750rpm
45volts, 3 phase, 50 cycles
Complete with Panel and 4 x temperature control units
 
Price  
  UK   request
125832711 202

JOPP KH2/250 for sale
Cam Milling Machine


x-travel: 0000 mmy-travel: 0000 mmz-travel: 0000 mmtotal power requirement: kWweight of the machine ca.: 0,30 tdimensions of the machine ca.: mThis is a curve planer JOPP KH250 with curve generatorJOCAMAT for the produ ...
used machine
 
x-travel: 0000 mm
y-travel: 0000 mm
z-travel: 0000 mm
total power requirement: kW
weight of the machine ca.: 0,30 t
dimensions of the machine ca.: m
This is a curve planer JOPP KH250 with curve generator
JOCAMAT for the production of curves for cam-controlled lathes.
Largest producible flat curve diameter approx. 300mm
Largest manufacturable bell curve diameter about 200mm
Diameter of the spindles about 20mm
Largest curve angle that can be produced in one turn approx. 300 degrees (82 degrees)

Machine can be demonstrated under power.



This ad was created with MODUL MWS - the software solution of LogoTech.
1974
Price  
    request
125823205 307

LBBC 50ft Steam Autoclave for sale
Autoclave


LBBC Autoclave 50ft long x 10ft diam. Steam operation Working pressure 120psi Quick Lock door Welded construction Complete with trolley and accessories

 
LBBC Autoclave 50ft long x 10ft diam.
Steam operation
Working pressure 120psi
Quick Lock door
Welded construction
Complete with trolley and accessories
 
Price  
  UK   request
125832704 107

HÄMMERLE 80/1250 for sale
Roller leveller


material width: 1250 mmmaterial thickness: 20,00 mmno. of straightening rolls: 19 diam. of the rolls ca.: 80 mmsheet thickness - min.: 0,80 mmspeed ca.: 2 - 20 m/min.run-in height: ca. 1000 mmtotal power requirement: kW ...
used machine
 
material width: 1250 mm
material thickness: 20,00 mm
no. of straightening rolls: 19
diam. of the rolls ca.: 80 mm
sheet thickness - min.: 0,80 mm
speed ca.: 2 - 20 m/min.
run-in height: ca. 1000 mm
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
Hydraulic leveller for parts with sheet thickness from 0,80 - 20,00 mm

The straightening machine is mechanically reworked in 2018.

With infeed table with ball castors, outlet roller conveyor and incl. Control
cabinet.Documentation available.With CE conformity declaration.


Dimensions:
Machine about 2800 x 1850 x 2120 mm
Switch cabinet: approx. 1000 x 400 x 1900 mm
Hydraulics: about 2400 x 1250 x 1800 mm





This ad was created with MODUL MWS - the software solution of LogoTech.
1995
Price  
    request
125823154 102

CAMI C29 for sale
Multi-Slide Lathe


Bar capacity 32 mm number of revolutions 6000 Motor power 3.7 kW maximum stroke of the turret 100 mm maximum distance between the turret and clamp 170 mm minimum distance between the turret and clamp 70 mm number s ...
used machine
 
Bar capacity 32 mm
number of revolutions 6000
Motor power 3.7 kW
maximum stroke of the turret 100 mm
maximum distance between the turret and clamp 170 mm
minimum distance between the turret and clamp 70 mm
number six port holes in tool turret
Tools Number 4 on slides
Controlled Axes Number 6
Poligonatore / fresafiletti
Iemca charger
2005
2005
Price  
  IT   request
125832706 107

HÄMMERLE TRM 30/750 for sale
Roller leveller


material width: 0750 mmmaterial thickness: 7,00 mmno. of straightening rolls: 19 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 30 mmsheet length min.: 60 mmspeed ca.: 2 - 20 m/min.total power requirement: kWwei ...
used machine
 
material width: 0750 mm
material thickness: 7,00 mm
no. of straightening rolls: 19
sheet thickness - min.: 0,50 mm
diam. of the rolls ca.: 30 mm
sheet length min.: 60 mm
speed ca.: 2 - 20 m/min.
total power requirement: kW
weight of the machine ca.: 10 t
dimensions of the machine ca.: m
hydraulic leveller

The leveller is completly checked and revised.
We invite you to make a test with your material on the leveller.

Dimensions:
leveller - 2,30 x 1,80 x 1,80 m
hydraulic - 1,60 x 0,90 x 1,80 m
control - 0,60 x 0,40 x 1,90 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1994
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More ROLL models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Embossing foiling press PB+E HD-025


Embossing / foiling press PB+E Model HD-025 Year 1985's Max size 250 x 100 mm Pressure up to 2.5 tons Foiling 1 foil pulls Operation semi automatic Details Interfal controlled, embossing time controlled, temperature controlled Available direct

other machines Sulfuric Acid Plant 1500 MT New Surplus


Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics: Type Dry bulk solid powder Sulphur > 99.5 % w/w Inorganic ash < 0.4 % w/w Carbon < 0.1 % w/w All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost. The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed. The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.

Automatic power-feeder for hobby MAGGI STEFF 2032 MAGGI STEFF 2032


Automatic power-feeder for hobby MAGGI STEFF 2032 nr. 3 rollers d. 80 mm. nr. 4 speeds CE

Injection molding machines ENGEL VICTORY 650/130 TECH


ENGEL VICTORY 650/130 TECH was built in 2004. The machine is designed for processing of thermoplastics and silicone-for each type of plastic is a separate unit. In addition, the Board fixed and movable is cooled with water. Technical data: -the number of hours worked: 70822 -the maximum clamping tables: 1300 kN mass injection: max. 290 g/PS -injection pressure: max. 2048 bar -height: min. 300 mm -opening: max. 600 mm -distance tool plates: max. 900 mm -ejector stroke: max. 150 mm -centering ring: 160 mm -screw diameter: 45 mm -weight: 9500 kg Equipment of injection moulding machines ENGEL VICTORY 650/130 TECH:-language: Polish -hot runner controller -number of zones: 11 -sorting unit -air valves -the quantity of air valves: 4

Rubber extruders Francis Shaw 90mm Pin Barrel


Francis Shaw Pin Barrel Extruder Screw diam. 90mm LD ratio 16:1 Roller feed Barrel jacked / pinned Clamp swing bolt DC drive motor 63kW 1750rpm 45volts, 3 phase, 50 cycles Complete with Panel and 4 x temperature control units

Autoclave LBBC 50ft Steam Autoclave


LBBC Autoclave 50ft long x 10ft diam. Steam operation Working pressure 120psi Quick Lock door Welded construction Complete with trolley and accessories

Francis Shaw 90mm Pin Barrel


Francis Shaw Pin Barrel Extruder Screw diam. 90mm LD ratio 16:1 Roller feed Barrel jacked / pinned Clamp swing bolt DC drive motor 63kW 1750rpm 45volts, 3 phase, 50 cycles Complete with Panel and 4 x temperature control units

Multi-Slide Lathe CAMI C29


Bar capacity 32 mm number of revolutions 6000 Motor power 3.7 kW maximum stroke of the turret 100 mm maximum distance between the turret and clamp 170 mm minimum distance between the turret and clamp 70 mm number six port holes in tool turret Tools Number 4 on slides Controlled Axes Number 6 Poligonatore / fresafiletti Iemca charger 2005

Packaging facilities Ilapak Vegatronic 2000/400 or 400


Similar Ilapak Vegatronic packaging: -vertical, sequential working packaging machines - packaging food products in bags i.e. croissants -filling of bags from dosing aggregate -dosing of adjusted product quantity through vertical filling pipe - Siemens PLC controlling -up to 40 diff. programs to save and additional functions of machine to manage i.e. photocell, printer, labeler, clipper, piece dosing system . -display and control keyboard makes possible operating parameters adjustment as well fast operational diagnosis - based on stepwise film take-off -grants long reliable operation -pneumatic -automatic In total 4 machines available. a) Ilapak Vegatronic 200/400 - year 2003 - 2 machines b) Ilapak Vegatronic 400 - year 1997 - 2 machines

Plate Edge Milling Beveling Chamfering Machine Linsinger 400/2140 x 25


Linsinger 400/2140 x 25 Plate Edge Milling Chamfering Beveling Machine Sheet metal bevelling machine Linsinger (1978) Sheet width = from 400 mm to 2140 mm Thickness = 25 mm Included: roller conveyor and DEMAG loading crane capacity 2.3 Tonnes

SC1000 Controller Display Module Hach SC1000 LXG402.99.00021


SC1000 consists of a Display Module and Probe Module. Probe Modules for the SC1000 can be networked together to accommodate up to 32 digital sensors or analyzers. Were used with 4 sensors - pH, O2, Redox, Temperature. Perfect condition. Without sensors 2 PCS.

Chillers Kalte Klima SCAE


Chiller with Free-cooling Cooling capacity: 63 kW. Year of manufacture: 2015 Refrigerant circuit: 1 pieces Freon: R410A Compressors: 2 pcs. Copeland (scroll) Number of fans: 2 pcs. Complete hydraulic module (water pumps, buffer tank and a expansion vessel) Dimensions: 2,6 ? 1,2 ? 2,05 m Weight: 990 kg In stock: 2 pcs. This chiller is in excellent condition

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible

Ryobi 524 GE


Autoplate Ink Remote control Ink-roller wash up device blanket wash-up device Ryobi-matic filmdampening Technotrans Alpha. D chilling and circulation dampening unit Powder unit CIP PCS-G consol with register control

Welding Machines ZDIS GLIWICE YUN 4000-2


Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled cutting machine for thermal cutting of YUN 4000-2 is designed for oxygen cutting curved sheets and low-carbon steels. Technical parameters: -overall dimensions: 15x3 m, it can be reduced because it is modular -two oxygen burners and the third burner with plasma routing -maximum cutting width: 4000 mm -gas combustible: acetylene -power consumption: ok. 1.5 kVA -compressed air: min. 0.4 MPa, max. 20 m3/h -water: min. 0.1 MPa, max. 0.12 m3/h Part of the cutter consists of the following main units: -roadway -trolley with longitudinal and transverse drive -gas installation -mikrokomputerowy control MOUSSE -control unit ZSP -bottom bracket oxygen: 2 PCs. -installation of the socket -dimensions of the teams drive longitudinal and transverse (width x height x depth): 5450 x 1675 x 2500 mm, weight: 1400 kg -overall dimensions of the roadway (length x height x): 14000 x 600 x 5000 mm, weight: 1800 kg -the machine burner GCE with valves and fuses przypalnikowymi and a set of nozzles to the cutting thickness from 3-150 mm: 2 Kit. -DTR (motor and technical documentation) Optional equipment cutting ZDIS GLIWICE YUN 4000-2: -team to the sprinkler water mist: 1 PCs. -team to bevel edge for 0-45 degrees, straight line cutting: 1 PCs. -ASTER to support work in developing technology programs: 1 PCs.

Heidelberg Speedmaster SM 52-4-P +


perfecting 2/2, 4/0 Plus Version CP-Tronic digital machine control CPC 1-04 Control Desk for Remote Control of ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen and Job Memory Card ALCOLOR damping with circulation and refrigeration AUTOPLATE semi-automatic plate change automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device powder sprayer low pile delivery serial equipment

Sucker-Müller-Velours-Finishing-Machine Sucker-Müller Brushing-Raising-Shearing


Sucker-Müller-Velours-Finishing-(Brushing-Raising-Shearing-Polishing) Machine (42m long)for Weaving Velours, Carpet, Blanket, Terry year: 1990, width: 2000 mm Complete Machine consisting of: - Entrance into 2 roll pad - 2 engine-driven Brushing-Machines with Elec-warming system - 3 thermal working Raising-Machines - 3 combined Shearing-Machines, Type PRC-2- TIGERCUT POLLROTTOR Sucker-Müller - Weft Straitner Fab. Mahlo - Egalisier Baby Stenter - Batch Motion Device Winder or Plaiter

Pump with el-motor ING.Per / ABB KF550.2A1A26


Pump KF550.2A1A26 PG Flow pump, ABB M2QA160L4A B5 39,5M3/H Rolls Royce art. No: 804067

Pump with el-motor ING.Per / ABB PG Flow pmp 50/125 A1


HT stand by pump w/el-motor PG Flow pmp 50/125 A1; ABB M2QA132S2B Rolls Royce art. No: 804066 Unused

ING.Per / ABB PG Flow pmp 50/125


Stand by pump w/el-motor PG Flow pmp 50/125 A1; ABB M2QA160M2A B5 Rolls Royce art. no: 804065

Shrink Tunnel HUGO BECK SL 712/ 50


Voltage: 380V, connected load: 12-15kW, including roller conveyor.

RC240-SR


3-Way Control valve, w/pneumatic actuator RC240-SR Rolls Royce art. No: 703853 / 947/28-65 Unused

Numerically Controlled Machining Centres DIGIMA E9 2030 D


Machining centre DIGIMA E9 2030 D was built in the year 2015. The machine is designed for cutting wood, plywood and plastics. Technical parameters: -table size: 2050 x 3050 mm -working space (X, Y, Z): 2000 x 3000 x 850 mm -the maximum spindle speed: 22000 rpm, inverter -HSD spindle (Italian): 10 kW, liquid cooling -move the X axis: servo drive 3000, rack -move the Y axis: 2 servo drives in 2000, gears -move Z axis: servo drive 2000 in, ball screw -THK guides: Japan -maximum speed: 20 m/min. -quick stroke: 50/50/15 m/min. -industrial control: OPEN control OSAI -positioning accuracy: ± 0.05/300 mm -AC power supply: 380 V -machine construction: steel, welded -weight of the machine: ok. 8000 kg The equipment machining centre DIGIMA E9 2030 D:-software extensions SurfCAM 3 Axis Base for 5 Axis Advanced Edition-post SurfCAM to control OSAI: E9-OSAI driver: 5-axis, simultaneous-HSD spindle 10kW, 22000 RPM. -table with aluminium profiles with T-these-automatic, carousel tool changer: 8 positions tool-tool cones: 4 PCs. -electronic measuring tools-a set of basic maintenance tools-DTR: in Polish language-CE Declaration of conformity

Way Control valve, ND80, Samson 3244/ Samson Samson 3244


3-Way Control valve, ND80, Samson 3244/actuator 3271/positioner 4763 Rolls Royce article number: 702498

CNC Turning Machines DOOSAN Puma-700XLM CNC


Model : Puma-700XLM CNC Turn Mill Year : 2014 Max turning length : 5050mm 24” chuck 3 sets of manual steady rest (35-330, 300-450, 420-570mm) 2 angular + 3 stright milling holders chip conveyor Fanuc 32iB controller

HEIDELBERG SM52-4


D438 HEIDELBERG SM52-4 (Year1998) CPC 1.04 in combination with CP-Tronic / Alcolor dampening with Technotrans (new from 2017) / Autoplate / Automatic wash-up equipment (all rollers, plate cylinders, blanket cylinders and impression cylinders) / Automatic size setting from CP-tronic / Automatic impression setting / Electronic double sheet control / Suctiondrum in delivery / Alphatronic 200 powder spray / Maximum speed 15000 / App. 95 mio. Impressions. Available: Immediately (inspection is possible in production.) Location: Belgium Machine in very good working condition, always maintained by Heidelberg BNL (Full Service Contract). Machine is totally free of damages.

HEIDELBERG SM74-4+L


D479 HEIDELBERG SM74-4+L (Year1999) CP2000 / Alcolor dampening with Technotrans / Autoplate / Automatic wash-up equipment (all rollers, plate cylinders, blanket cylinders and impression cylinders) / Automatic size setting / Automatic impression setting / Electronic double sheet control / Suctiondrum in delivery / Alphatronic 200 powder spray / Ink Temperature control / Coating unit with Chambered Ductor Blade / IR Dryer COM CON 110 / Maximum speed 15000. App. 97 mio. Impressions. Available: Immediately (inspection is possible in production.) Location: Belgium Machine in very good working condition, always maintained by Heidelberg BNL (Full Service Contract). Machine is totally free of damages.

Punching machines Heidelberg Cylinders package


Four Heidelberg Cylinder in package : - Heidelberg Cylinder S 54x72 cms. with ink unit and rollers - Heidelberg Cylinder S 54x72 with ink unit and rollers - Heidelberg Cylinder OHZ 50x70 for die cutting - Heidelberg Cylinder KS 38x52 with ink unit and rollers All machines complete with accessories, no damages

Snails (Screws) Korea and Austria Engel controller parts, Screw


Dear All. we have new engel controller spare parts and we can provide new screw and barrel ass'y which is made by Korea. Please contact and we can serve you with our best. G.J.CHOI of Korea

HEIDELBERG SM 102-4 VP


4 colors 4/0-2/2 Thickness 0.03-0.6 mm CPC 1.03, CP Tronic Alcolor Baldwin Automatic rollers and blankets washer Grafix Alphatronic 200 powder spray Plate punch 275 MIO

Cutting-To-Length Lines NOVASTILMEC


type 2000/15 Flytronic year of construction 1999/2013* material hot rolled mild steel / high resistance steel tensile strength 480 – 750 N/mm² yield 360 – 600 N/mm² band width unedged min. 700 mm, max. 2.050 mm band thickness min. 1,5 mm band thickness max. 12 mm 750 N/mm² 15 mm 480 N/mm² coil weight max. 36,0 t coil inside – Ø 600 – 710 – 760 - 850 mm coil outside – Ø 1.100 – 2.350 mm sheet length with stacker max. 10.000 mm manual max. 15.000 mm cutting tolerance +/- 0,5 mm working speed 0 – 38 m/min. working direction right ? left the line consists of: coil car hydraulically double head decoiler expanding hydraulically gear hydraulically decoiler movable on base plate band centering control system portal with press roll coil opener hydraulically pre-leveler no. of driving rolls 2 no. of leveling rolls 4 edge trimming shear with scrap chopper brush unit exhaust unit leveler no. of leveling rolls 9 leveling roll – Ø 160 mm back up rolls 5 leveler no. of leveling rolls 15 leveling roll – Ø 80 mm back up rolls 7 flying shear Flytronic band thickness 1,5 – 15 mm inspection conveyor table with scrap guide stacking device with infeed driving roll unit length 10.000 mm hydraulic equipment electrical equipment S 5 * 2013 revision Flytronic Shear

Roland Rekord RZK 3 B


-Two colours STRAIGHT machine max size 72x102 cms. -Year 1984, 72 mil. original impressions, Quick action plate clamps -Water dampening with new cooling system -Only one owner, Chromed cylinders, very nice conditions -Full set of spare rollers, plate punch, all accessories

Caspary GmbH Pub Brewery 10 hl


Pub Brewery Caspary 10 HL, Copper Cladded, 2017 Never Installed This pub brewery equipment was made by German Caspary GmbH in year 2017 and it has never been installed and thus new like condition. Factory made brew house block consist of Mash & Wort Kettle, Mash & Lauter Tun and Whirlpool. Whirlpool is located just under Mash & Lautertun. This block has been tested at Caspay factory with all accessories and instruments before shipping. The wort kettle, lauter tun and related pipes and ducts are cladded with highly polished copper which gives this pub brewery a very special high quality atmosphere. Also two-wing trapdoors of both vessels are hand made from copper and polished. This is a complete pub brewery with malt mill, yeast tanks, fermentation tanks, storage tanks, CIP with three tanks, refrigeration system, steam and pressurized air supply equipment. The brewery has semi-automatic control where all valves are controlled pneumatically, while the mashing and boiling process runs automatically. All the steps in this sub-process can be operated via the control panel and programmed freely. Lautering is effected via a continuously adjustable valve. Whereby the Caspary lauter tun ensures smooth and even lautering, a dedicated lauter pump prevents interruptions during lautering. Main characteristics of this brewery - Cast out wort quantity 10 hl at 12 % gravity - Malt though 175 kg/ brew / brew - Max malt milling capacity 500 kg/h - Mash & wort kettle; wort heating in two steps, first heating with double walled bottom and actual wort boiling with internal steam heater - All tanks, vessels, pipes and supports are made of stainless steel 1.4301 / ANSI 304

Standalone Core Pull Rexroth HS-S07-D260-2-C


This is a double core pull auxillary power pack manufactured by Rexroth. These power packs are used to provide a double core pull hydraulic circuit to a moulding process when not originally fitted to the machine. One of the most common uses of these power packs is when used with an all-electric moulding machine. An all-electric machine wouldn’t have an hydraulic circuit available to be used with core pull and it would not have an oil cooler. Some manufacturers do offer this as option on all-electric machines but it is typically very expensive and is not often seen as a result. This unit is completely self-sufficient with a 50 litre oil tank, integrated oil cooler and a proportionally controlled pump. The unit interfaces with the machine via a 16 pin plug, the interface required will be different from manufacturer to manufacturer. Come and take a closer look at our Wellingborough workshop. Manufacturer: Rexroth Model: HS-S07-D260-2-C Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2005 Lead Time: Immediate In Production: Yes

Injection molding machines BOY 220 Procan


The ever popular BOY 22 with Procan controller. These machines are some of the smallest (footprint) wise in the market and have proven to be reliable and cost effective machines over the years. This machine has been extensively refurbished by us, now in tip top condition. This one has a 24mm screw and only 26078 hours on the clock. Manufacturer: BOY Model: 22M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS) (g): 32 Control System: Procan Lead Time: Immediate Hours: 26060 In Production: Yes Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines Arburg 420M Two Colour Machine


Awaiting refurbishment at our works is an Arburg 420M 1000-250/250 with Multronica controller. The machine is a twin-shot (two-colour) machine with one injection unit mounted horizontally and one injection unit mounted vertically on the tie-bards for injection on the split-line. Both plasticising units are the same injection unit designation and both are fitted with 30mm barrels, each delivering a shot weight of 89g in PS. The tie-bar spacing is 420mm x 420mm. We don’t tend to see many twin shot machines on the market so this a rare example from a top manufacturer. Manufacturer: Arburg Model: 420M 1000-250/250 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 100 Screw Diameter (mm): 30 & 30 Max Shot Weight (PS) (g): 89 + 89 Control System: Multronica Lead Time: 4 weeks from order In Production: Yes Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines BOY 55M


55 tonne clamp BOY machine which is currently undergoing refurbishment at our works in Wellingborough. This machine only has 27600 run hours on the clock and is fitted with the popular Procan controller. BOY machines typically offer a very small footprint and this particular model has excellent access under the clamp unit for conveyors and ease of access. Manufacturer: BOY Model: 55M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 55 Screw Diameter (mm): 38 Max Shot Weight (PS) (g): 122 Control System: Procan Lead Time: 4 weeks from order Hours: 27600 In Production: Yes Location: Wellingborough Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Buhler GmbH Malt Mill Buhler Maltomat 2


Malt Mill Buhler Maltomat 2 with conditioner and malt hopper This is a malt milling line, capacity 10 t/h, built in 2004 by Buhler from malt conditioner to malt discharge conveyor, all still installed but electricity disconnected. Controlled by Siemens Simatic S7 PLC. Equipment is in good condition. The delivery includes the following equipment and documentation: 1. Malt conditioner Bühler Condimat, type BBFA 3255, electric motor 5.5 kW 2. Malt mill Bühler Maltomat 2, type DBZG 152MU, 6-rolls, roll length 1500 mm, electric motor 30 kW/1450 rpm. Crushing with three grinding roll pairs and only one screening stage (after the husk rolls) which produces a high husk volume for fast wort separation. Comes with one complete set of reconditioned grinding rolls 3. Bühler Malt hopper, capacity 14 tons with discharge chain conveyor type MNKA 200, length 10 meter, capacity 72 tons/h, electric motor 11 kW 4. Original Bühler documentation and copy of PLC program

Roller Coating Machine BÜRKLE RCL 1300


Max. workpiece width: 1300mm, workpiece height: 80mm, applying roller diameter: 240mm, working height: 900mm, length: 800mm, width: 3350mm.

ESAU & HUEBER GmbH SEMI/-fill


Beer KEG Filling Line Esau & Hueber Semiautomatic Party-KEG 5 liter 200 KEG/hour The semi automatic party-KEG-filler with 4 filling heads and capacity beginning from 100 up to 200 keg/h, made by Esau & Hueber GmbH in the year 2000. The KEG is placed manually onto the filler and lifted by two-hand operation. A sensor recognizes the arriving of the keg and starts automatically the filling process. The pre-air valve and the return-air will open. The keg gets purged with CO2 for approximately 5 seconds and the air opened simultaneously and the keg will be filled from bottom to top. A sensor probe – installed into the return-air channel – controls the filling process. A lamp indicates the finished filling process – the beer valve will be closed. The return-air valve stays open for a moment to relieve the filling pressure inside the keg to prevent any spilling when removing the keg from the filling head. Utilities, beer, cleaning agents, gas load and a return gas supplied via valve and piping systems controlled by Esau Hueber control system. The design is made of stainless steel frame with a work desk, on which are arranged lift cylinders and pneumatic switches. The frame is equipped with support devices to accommodate all the remaining components. Bottling of beverages produced in the automatic mode. All other processes are performed manually. Equipment is good condition and ready to delivery. Manufacturer: ESAU & HUEBER GmbH Manufacturing year: 2000 Type: SEMI/-fill Capacity: 100 – 200 keg/h Number of filling heads: 4 Serial number: 7003 Product pressure: 1,5 – 2,0 bar Product temperature: >4 – 5 0C Voltage: 230 V, 50 Hz Operating air: max. 7,0 bar Pressure CO2: max. 8,0 bar CIP / washing up to 120 0C / max. pressure 1,5 bar

Chillers Climaveneta NECS


Cooling capacity: 354 kW. Year of manufacture: 2012 Refrigerant circuit: 2 pieces Freon: R410A Compressors: 4 pcs. Copeland (scroll) Number of fans: 6 pcs. Dimensions: 3,95 ? 2,3 ? 2,45 m Weight: 3310 kg This chiller is in very good condition

Roland 605+L


-Five colours plus lack unit size 72x102 cms. -Year 1988, 95 mil. copies -RCI 2 table control for inks and plates registers -Rolandmatic dampening with new Aquapress refrigeration system -Automatic blanket washers, plate punch -Spare rollers and accessories -In production, any print test possible

Water chiller VRT VLA 435 S


VRT CUSTARD 435 S Product number: M18-4296 Cooling capacity: 423 kW Number of fans: 6 Refrigerant: R410A Refrigerant content: 30.8 + 29 kg Rated voltage: 400 Volt Power consumption: 157 kW Dimensions: 3614 x 2242 x 2508 mm Weight: 2642 kg Construction year: 2015 Units in stock: 3 piece (s) Price: request a quote Very young well working cold water machine by 2015, with a plate heat exchanger and multiple scroll compressors of the mark Copeland or Bitzer. we have a total of about 30 pieces of these machines in stock with capacities of 180 to 520 kW. Note: these machines have a (small) rust/paint problem. The construction (steel) of these chillers is not handled properly, making the paint flakes off and here and there rusting has occurred. The rust will not affect the operation (cooling system) of the machine. Visit our website: used-refrigeration

Komori Lithrone LS 540 + LX


coater tower PQC Remote Control of Ink Zones, as well lateral, circumferential and diagonal Register Komorimatic damping with circulation and refrigeration ink temperature control S-APC semi-automatic plate change AMR automatic size adjustment KMS automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device powder sprayer IR-dryer extended high pile delivery serial equipment elevated

Heidelberg Speedmaster SM 52-5-P3


CP2000 Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR damping with circulation and refrigeration AUTOPLATE semi-automatic plate change automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device powder sprayer Grafix Alphatronic 200 low pile delivery serial equipment

Komori Lihthrone LS 640 + LX (UV)


coater tower (chambered doctor blade system) PDC-S Printing Control system PQC-S Remote Control of Ink Zones, as well lateral, circumferential and diagonal Register Komorimatic damping with circulation and refrigeration S-APC semi-automatic plate change KMS service system KHS pre-inking and de-inking AMR Automatic Make Ready system automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device Skeleton 3 x UV interdeck dryers 1 x UV end dryer 1 x IR dryer and hot air extended high pile delivery serial equipment max. 16'000 sheets / hour

Heidelberg Speedmaster SM 74-5-H


Prinect Press Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR damping with circulation and refrigeration AUTOPLATE semi-automatic plate change automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device powder sprayer IR-dryer high pile delivery serial equipment

Heidelberg Speedmaster SM 74-4-H Axis


Axis Control CP2000 Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR Vario damping withcirculation and refrigeration AUTOPLATE semi-automatic plate change PRESET automatic size adjustment automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device powder sprayer high pile delivery serial equipment

Heidelberg Speedmaster SM 74-5-P3-H + L


perfecting 2/3, 5/0 coater tower Prinect Axis Control Prinect Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR damping with circulation and refrigeration AUTOPLATE semi-automatic plate change automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device StaticStar advanced powder sprayer Exatronic IR-dryer DryStar 2000 high pile delivery serial equipment

MBO K 800.2/6-SKTL-FP


Pallet feeder 6 pockets 2 knives Navigator control with 15" Touch-Screen automatic roller and knife adjustment knife cassette ultrasonic double sheet control maculator exit device ASP 66-L delivery
Get the latest machine offers by email: order newsletter