138,083 used machines on RESALE, but how to find them? Machine Search
Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5) Auction-ID: A7-50523-847
With table 455x455x940mm Auction-ID: A1-49889-261
Fully automatic band saw control Minipos 807 chip conveyor Cutting diameter 420 mm Saw blade length 6300 x 41 x 1.3 mm Cutting width mm Table height mm Profile size - max. mm Cutting speed 10 - 130 m/min Saw blade length 4870 x 27 x 0.9 mm Total power requirement 9.0 kW Machine weight approx. 3.4 t Space requirement approx. 3.5 x 2.35 x 2.1 m Auction-ID: A7-50523-830
including: infeed and outfeed roller conveyors: dimensions: 1x L4640 mm, 1x 5370mm, 4x L2160 mm, roller length: 495mm. including 1 roller conveyor segment in hall 1 and parts Auction-ID: A1-49889-20
This is the "Comfort" version that has a 2m long sliding table and outrigger that can handle 8x4 sheet material. Connects to 16A (blue plug) 240V single phase supply. Clean used condition showing normal signs of workshop use, all functions fully working. Used in a home workshop only by one person so has been looked after. The spindle moulder has been used once only. Comes with the following; 1. Spanners and allen keys as original supply. 2. Hammer boxed set of spindle moulder tooling 3. Hammer heavy duty clamp for work holding on the sliding table. 4. 8 saw blades of various tooth counts. Hammer and Bosch brand. One blade has carbide tip damage but you might want to get it repaired, the others will benefit from sharpening. 5. used planer knives that may have some life left in them, I was going to try honing them. 6. Printed Manual 7. Digital readout for the thicknes ...
Good condition Auction-ID: A1-50540-145
Second-hand Weinig / Raimann Unirip 310 multi-blade saw for professional cutting and machining of timber in industrial woodworking. The machine is designed for typical rip-cutting work using multiple saw blades and is fitted with the Quickfix system for rapid hydraulic clamping. Technical data: Cutting width: 310 mm Motor: 30 kW Spindle diameter: 65 mm Feed rate: 535 m/min Chain width: 340 mm Cutting height: max. 115 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-50403-159
Sawblade tiltable: 45 ° Length of the rolling table: 2500 mm cutting width: 1250 mm Motor output: 4,0 kW Cutting height: 90 mm Cutting height at 45°: mm Saw blade diameter: mm Speed: 4000 / 6000 U/min. weight of the machine ca.: 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...
sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;
sawing length: 5300mm; sawing height: 2100mm; cutting depth: 60mm; scoring unit: no; feed: manuell; read out horizontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; evasive workpiece support: ja; speed sawblade: ca. 4000 U/min; motor power: 3 kW; machine length: 6500mm; machine width: 1500mm; machine height: 3000 mm; weight: 800kg;
cutting length: 5300mm; cutting height: 2100mm; cutting depht: 80mm; scoring unit: no; feed: manuell; read out horicontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; movable material support: ja; Sawblade speed: ca. 4000 U/min; motor power: 4 kW; machine length: 6500mm; machine depth: 1500mm; machine height: 2800 mm; weight: 800kg;
cutting height at 90°: 125 mm; cutting width at 90°: 600 mm; width roller convoyer: 600 mm; diameter saw blade: mobile: yes; machine length: 3100 mm; machine width: 1900 mm; machine hight: 1750 mm; weight: ca. 650 kg;
sliding table length: 3000 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 3200 mm; cutting depth: scoring unit: ja; height adjustment sawblade: manuell / Kurbel; tilting adjustment sawblade: manuell / Kurbel; adjustment fence: manuell; readout sawblade tilting: Digital; read out sawblade height: -; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 450 mm; number of speeds: 4000 U/min; motor power: 4 kW; motor brake: ja - automatisch; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 2100 mm; weight: ca. 1100 kg;
sliding carriage length: 3200 mm; cutting width with rip fence: 1200 mm; cutting width at the cross cut: 3450 mm; Schnittiefe: scoring unit: yes; height adjustment: manual / crank; tilt adjustment: manual / crank; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: -; display rip fence: scala; display at the cross cut: Scala; saw blade diameter: speeds: 3200 / 4200 / 5000 U/min; motor power: 5 kW; motor brake: yes - automatically; suction connection: 80 mm and120 mm; machine length: 3350mm; machine width: 1800 mm; weight:
sliding table length: 3300 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 2800 mm; cutting depth: 170 mm; scoring unit: nein; height adjustment sawblade: hydraulisch; tilting adjustment sawblade: hydraulisch; adjustment fence: manuell; read out sawblade tilting: Scala; read out cutting height: Scala; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 500 mm; sawblade speeds: 2800 / 4000 / 5500; motorpower: 5,5kW; suction connection: 80 und 120mm; machine lenght: 4000 mm; machine width: 2200 mm; weight: ca. 1300kg;
Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide
Unused fencing anthracite height 203 length 250cm. Wire rod thickness 8mmx6mmx8mm extra heavy. Total package weight 800kg. Material galvanized and powder coated Auction-ID: A1-50277-25
Unaudited Auction-ID: A1-50540-219
Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg
Raimann KS310 multi-saw with material pick-up Max. cutting width: 310 mm Max. Passage width: 650 mm Max. cutting height with multi-saw equipment: without 120mm pressure board with 105mm pressure board Min. cutting height: 10mm Min. element length 450mm Chain width 340mm Saw shaft diameter: 65mm Diameter of the socket sleeve 80mm circular saw diameter 250-360mm Saw shaft rotational speed: 3900 rpm Feed speed, stepless: 4 - 45 m/min Main motor 37kW Receiving table with side dump and returning the material to the operator Technical documentation and CE certificate Dimensions 640x370x180cmH Net price
ID3867 Fantini 70 RA/P year/Baujahr 2020 1.300 hours/hours Cutting saw, sword length 2.7 m, swivel head (vertical and horizontal), with 3 guide rails and transport/lifting device Shearer saw, blade length 2.7m, rotating head vertical and horziontal, with 3 x working rails, transport/lifting device Price: on request
Already disassembled Auction-ID: A1-50076-1005
Year of manufacture: 2018 Serial Number: 803003071 Auction-ID: A1-50632-308
an industrial CNC controlled sawing machine installation of the brand Calvet, equipped with associated peripherals (dust extraction and compressor). I'll list everything neatly for you: Main installation Brand & type: Calvet (Italian brand specializing in machines for aluminum, PVC and metalworking). This type is a double miter saw (usually used for aluminum profiles, PVC windows/doors and light metals). Equipped with CNC control (touchscreen panel visible on the machine). Lockable protective cover for safety. Automatic feed rail and positioning. Function: Precise cutting of profiles in double angles (left & right) with high precision. Mainly used in window construction, façade construction, industrial aluminum constructions. Extraction system Brand: Italy Vacuum s.r.l. Model: Vortex 58 FT Year of construction: 2022 Specifications: Power: 2.2 kW Power supply: 400 V / 3-p ...
Year of Make: 2017 Serial Number: 709000918 Auction-ID: A1-50632-379
Industrial metal saw on frame, with robust construction, designed for cutting profiles, tubes, bars and other metal parts. Equipped with a circular disc cutting head, a clamping vise to hold the workpiece during cutting and several manual controls for adjustment and positioning. The cutting head is lowered using a large lever, providing good control during work. Professional machine with heavy construction, particularly suitable for metalwork, maintenance, manufacturing and mechanical workshops. Shows visible signs of use and age. Nameplate no longer available. Auction-ID: A3-46129-37203
Return goods; Technical data HiKOKI C10RJWAZ Table Saw 230V In Box; Power consumption 1,500 Watt; Weight 44 kg; Length 920 mm; Saw blade diameter 254 mm; Cutting depth 90° 79 mm; Mitre cutting depth 45° 57 mm; No-load speed 4,500 min; Motor brake Y; Starting current limitation Y; Height 600 mm Auction-ID: A1-40321-72
High-end trimming and resawing line EWD Combimes DK90 – built in 2014 For sale is a professional, highly mechanized trimming and resawing circular saw line from the premium manufacturer Esterer WD GmbH (EWD). The system is in a condition ready for dismantling and is characterized by its robust design, modern control technology and very high degree of mechanization. Due to the young year of construction (2014), the plant meets modern safety and efficiency standards (CE-compliant) and is immediately ready for heavy-duty continuous use in the sawmill. Technical specifications of the main machine • Manufacturer: Esterer WD GmbH, Germany • Model / Type: DK90-T2L/P (Pos. 1470) • Year of construction: 2014 • Saw shaft speed: 3,000 rpm (constant for optimal cutting quality) • Saw blade diameter (max.): 500 mm • Design: Variable cut thanks to flexible, electronic/hydraul ...
Drilling unit 7500 kg. Saw 3000 kg. Supply and Discharge Conveyor 2000 kg. per part 6-fold tool changer PEHAKA saw machine with angle rotation -60 to +45 degrees Infeed conveyor with pusher 20 meters Discharge track 10 meters suitable for UNP, IPE, HEA Minimum throughput length 1 meter Maximum throughput length 20 meters Auction-ID: A1-47362-80
1 Saw table Specifications: Brand: Aderna, Germany Robust saw table of German quality. Suitable for cutting light metals and plastics. In good condition, no play in sawing. With extra sharpened saw blades, for the various materials. Power current 380V, 3 phases. Complete with extraction and protection (can be mounted separately) 2. Saw table Brand: Hullhorst, Germany Robust saw table of German quality. Suitable for cutting light metals and plastics. In good condition, no play in sawing. With extra sharpened saw blades, for the various materials. Power current 380V, 3 phases. Complete with extraction and protection (can be mounted separately) 3. Saw table Brand, unknown Robust saw table. Suitable for cutting light metals and plastics. With extra sharpened saw blades, for the various materials. In good condition, no play in sawing. Power current 380V, 3 phases. 4 ...
without battery, without charger Auction-ID: A1-50452-33
without battery, without charger Auction-ID: A1-50452-46
without battery, without charger Auction-ID: A1-50452-45
Kaltenbach KKS 400 cold circular saw – Ø400 mm – hydraulic – including 2 roller conveyors Specifications: Brand: Kaltenbach Type: KKS 400 Serial Number: 53096 Version: semi-automatic cold circular saw / metal circular saw Maximum saw blade diameter: Ø400 mm Sawing principle: saw blade moving from bottom to top Cutting capacity 90° round: approx. Ø130 mm Square cutting capacity: approx. 120 × 120 mm Cutting capacity flat material: approx. 305 × 20 mm Machine weight: indicatively approx. 850–900 kg, excluding roller conveyors Roller conveyor 1: approx. 3,600 × 480 × 925 mm Roller conveyor 2: approx. 2,500 × 300 × 960 mm Features: Hydraulically controlled and adjustable saw feed Hydraulic material clamping Heavy Duty Vertical Clamping Device Swivel table saw for straight and mitre cuts Left and right miter setting Control panel with saw and mate ...
NRF Industrial Precision Miter Saw – Fine-toothed Circular Saw Blade – Longitudinal Stop Specifications: Manufacturer: Nederlandse Radiatoren Fabriek B.V., Holland Serial/machine number: ZM 02 Version: industrial precision crosscut saw / circular saw Drive: electric Sawing movement: manually operated by lever Connection: three-phase current Construction: heavy steel machine construction Features: Fine-toothed circular saw blade Largely shielded circular saw unit Long material/feed guidance Integrated measurement Sliding longitudinal stop Manually adjustable and lockable stop Guide rail with separate support leg Bottom frame with laying/storage space Various control switches Particularities: Suitable for repetitive cutting to set length Sourced from industrial production environment Used condition with signs of wear Exact technical capacity and maximum ...
Wacker BFS 1345AL Floor Cutter Manufacturer: Wacker Construction Equipment AG Model / Type: BFS 1345AL Machine Type: Floor Cutter / Floor Cutter Year of construction: 11/2003 Serial number: 1474146 Operating weight: 135 kg Engine: Honda GX390 QWA4 Engine type: 4-stroke gasoline engine Engine power: 9.6 kW at 2,670 rpm Engine Number: GCAA-3751279 Cutting blade: diamond cutting blade Ø 450 mm Application: Cutting asphalt, concrete and similar building materials Maintenance: Annual inspection according to manufacturer's maintenance schedule Condition: Used Signs of use: Signs of wear due to age and durability, paint wear, scratches and corrosion in places Auction-ID: A1-50369-6123
maximum number of results exceeded
please refine your search
10 € 
