rip saw used for sale

A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA

Foil shrink gun Shrink gunHand shrink gun Manufacturer Ripack Type 2000 Functioning: The packaged goods to be packed are, for example, coated with a polyethylene film as a shrink hood. After overputting, the film is heated with the Ripack 2000 hand-shrink gun. As a result, the film surch shrinkage forms to the packaged goods. A slipping on the pallet is prevented daurch! The goods are thus also protected against contamination and moisture. Special price

Description 4 HOT ROOM ZONES AVAILABLE LANGUAGES: ITALIAN ENGLISH GERMAN FRENCH SPANISH ARABIC

Gas-powered film shrinker, rollable, Ripack – second-hand - : Construction site price for pick-up this week from location: 5.500.- € (net), dismantled, packed and loaded! Later price from warehouse Frankenberg/Saxony: 5.950.- € (net), dismantled, packed and loaded! Manufacturer: Ripack, FR Type: Turbopack Year of construction: 2010 Gas: Propane Connected pressure: 3 bar Weight: 110kg Max. shrink height: 220cm Nominal heat load: 190kW Connected load: 163,400 Kcal Condition: good Available: immediately Location: Rhein Main / later Frankenberg / Saxony

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Manufacturer: Rippert, Type: Absaugventilator, Year: ca.1995, Diameter intake mm: 155 , Engine power kW: 1,3, Flow rate approx. m3/h: 1500, rotations rpm: 2860, Direkt drive: yes, Wight approx. kg: 60, Required space L x W x H mm: 800 x800 500, Vorführung möglich: yes, Year :ca.1995

Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995

Manufacturer: Rippert, Filter system - positive pressure: yes, Volume flow rate m³/h: ca. 7.500, Number of filter filter gallerys: 2, Required space L x W x H mm: 4.800 x 1.800 x 4.700,

Manufacturer: Rippert, Year: ca 1990, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 80, Number of lamps: 2, Lampen gerade eingebaut: 2, Lampen von unten: no , Adjustable: halblast, Conveyor lenght mm: ca. 2500, Year :ca 1990

Manufacturer: Rippert Düsentrockner, Type: DTK 041, Year: 2004, Work piece width min-max mm: 800, Channel length in mm: 7000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 50, Umluftleistung m³/h: 4600, Ex geschützt: no, Temperature regulation: yes, Min.-max. workpiece height in mm: 60, Conveyor lenght mm: 8000, Feedin speed m/min: 1-6, Belt conveyor: yes, Air speed in jets: 25 m/s, Flat spray nozzle: yes, Damper register - items: 1, Year :2004

Manufacturer: Rippert, Type: IR Vorwärmodul, Year: 2005, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Number of lamps: 6, Position of lamps: gerade, Power per lamp: ca.3, od distance mm: ca.80, Feeding speed m/min: 3-15, FREE TEXT: Lampen müssen erneuert werden, Year :2005

Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995

Manufacturer: Rippert, Type: Düsentrockner, Work piece width min-max mm: 1300, Channel length in mm: 14000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: max.80, Ex geschützt: yes, Gesamthöhe mm : 2500, Temperature regulation: yes, Druckdifferrenzschalter: yes, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Working height in mm: +/-950, Conveyor lenght mm: 14500, Through running hight mm: 100, Feedin speed m/min: 5-15, Belt conveyor: yes, Air speed in jets: ca.20, Round nozzle: yes, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.70,

Manufacturer: Rippert, Type: HOW TK 8000, Year: 2000, Control: yes, Channel width in mm: 1400, Channel height in mm: 2050, Channel length in mm: 8000, Chain transportation system length in mm: 13.900, Thermal output: 32 kW, Max. air temperature: 30, Damper register - items: 1, Exhaust air m³/h: min 500, Lösungsmittelmenge g/min: 160, Year :2000

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: paint wall, paint booth -Motor: Ex protected -Motor power: 5.0 kW -Speed: 1455 rpm -Connection input: Ø 430 mm -Connection output: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg -unfortunately no further data available

Centrifugal fan, dust extractor fan, fan, extraction fan, dust fan, painting extractor fan -for paint wall, paint booth -Motor Ex protected -Motor power: 2.5 kW -Speed: 1450 rpm -Volume flow: 5000 m³/h -Pressure: 800 Pa -Connection input: Ø 500 mm -Connection output: Ø 450 mm -Dimensions: 1065/850/H1390 mm -Weight: 186 kg

Ventilation system, comfort compact ventilation, heating system for classrooms, conference rooms, open-plan offices, restaurants -Volume flow: 6000 m³/h -Motor power: 1.85 kW -Dimensions: 1950/1100/H1200 mm -Weight: 260 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Radial fan, chip extractor, fan, suction, chip fan -Centrifugal fan in a galvanized housing, soundproofing -Motor power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Connection input: Ø 800 mm -Connection output: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: painting wall, painting booth -Motor: Ex protected -Motor power: 3.6 kW -Speed: 1440 rpm -Connection input: O mm -Connection output: 450 mm -Dimensions: 1260/1100 / H815 mm -Weight: 188 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: approx. 3 kW -Connection input: Ø 230 mm -Connection output: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Fan Rippert SB-300/1-A for suction of wood chips, wood dust or other chips., Volume flow: 6,800 m³/h, Engine: 11 kW, Inlet ø: 300 mm, Output ø: 350 mm.

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Description: Max. panel width 900 mm Max forward speed 48 mt/min Number of shafts 1 Motor Power 18.5 KW Max. cutting height 110 mm Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Height gauge, parallel gauge, height gauge -Height Gauge: Height Gauge -Working height: 0 - 300 mm -Dimensions: 180/70/H415 mm -Weight: 2.3 kg

Ripper tooth chain, saw chain, 4 pieces WMW, VEREINIGTE WERKZEUG-FABRIKEN GERINGSWALDE ( VWF ) 15 x 2 x 33 Division: 15 mm Number of drive links: 33 Drive link width: 2.0 mm Cutting width: approx. 9 mm New ! Dimensions ( packaging ): 300 x 130 x 70 mm

Technogel PA20A-45L Ripple pump Ripple pump 2010, Stainless, 15L tank capacity, pump capacity 1L per min, mobile, can be connected to freezer and filling machine

Height gauge, parallel gauge, height gauge -Manufacturer: Mitutoyo, height gauge type 192-104 -Max. Working height: 600 mm -Dial indicator: measuring accuracy 0.01 mm -Analog display: double counter -Dimensions: 275/120/H795 mm -Weight: 8.7 kg

Height gauge, parallel gauge, height gauge -Manufacturer: Mitutoyo, height gauge type 192-130 -Max. Working height: 300 mm -Dial indicator: measuring accuracy 0.01 mm -Analog display: double counter -Dimensions: 280/90/H480 mm -Weight: 4.5 kg

Height gauge, parallel gauge, height gauge -Manufacturer: Format, digital height measuring scriber Height 300 -Max. Working height: 300 mm -Dial indicator: measuring accuracy 0.01 mm -Digital display: automatic power off, mm/inch switching... -Dimensions: 200/75/H475 mm -Weight: 2.3 kg

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Working area, round 325 mm, square 300 x 300 mm, square flat 420 x 300 mm, cutting speed 17-100 m/min. infinitely variable, motor power 1.1 kW, blade length 3,770 mm, with roller tracks, total length approx. 8 m Total weight approx. 1,000 kg Transport dimensions: Saw with roller track right approx. 3.40 m x 2.00 m x 1.50 m, 750 kg, roller track left 4.90 x 0.50 x 0.83 m, 250 kg The machine is ready for use and can be viewed under power. A forklift for loading is available.

MEP Tiger-350-SX Metal Circular Saw Cold Circular Saw Semi-Automatic; -Manufacturer: MEP; -Type: Tiger 350 SX; -Year of construction: 1990; -Saw blade: 350 x 32 x 2.5 mm; -Round sawing range at 90°: 115 mm; -Flat: 180 x 95 mm; -Speeds: 15/30/45/90 rpm;

Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler -Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA -Motor: Himmel 3.0 kW / 2790 rpm -Saw unit: swivels 45 ? -Saw blade: O 410 mm -Price / fee: complete -Dimensions: 1060/760 / H680 mm -Weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg

SPECIFICATIONS: Double Circular Saw - 1 fixed saw blade - 1 movable saw blade for special angle cuts Max. working length mm: 1500 Saw blade diameter mm: 250 X - Y Blade Position 2 pneumatic clamping jacks

Description: Cylinder-controlled lowering system Hydraulic clamps weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,300 x 2,000 mm

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Technische Daten: - min./max. Sägebandbreite 15 - 200 mm - Zahnteilung 5 - 60 mm - Zahnhöhe max. 30 mm - Zahnformen PV, NV, KV - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 0-30 Zähne / min. (Drehzahlgeregelt über Potentiometer) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,2 kW - automatisches präzises Schleifen - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessungen L=800, B=1200, H=1750 mm - Gewicht 600 kg

Technische Daten: - min./max. Sägebandbreite 15 - 250 mm - Zahnteilung 0 - 60 mm - zahnhöhe max. 25 mm - Zahnformen PV, NV, KV, SB - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 12/90 Zähne / min.(8 Stufen Drehzahlgeregelt) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,5 kW - automatisches präzises Schleifen - Schutzkabine - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessungen L=1000, B=1500, H=1800 mm - Gewicht 600 kg

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Cut range: round 90° full: 50 mm Execution: Automatic Saw blade diameter: 250 mm Max. saw blade diameter: 250 mm Min. saw blade diameter: 175 mm Cut range: Square max.: 36 mm Cut length: up to: 300 mm Saw blade size: central bore: 32 mm Speeds: number (steps): 2 from: 27 rpm up to: 54 rpm Voltage 50 Hz 3x: 380 Volt Power: 2 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1400 mm Width: 750 mm Height: 1300 mm Various accessories: Automatic forward feed Coolant system