rip saw used for sale

Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300  ...

cutting width: max. 610 mm Cutting height: max. 150 mm Saw blade diameter: 600 mm Motor output: 9,2 kW turning speeds: 2750 U/min Required air-pressure: 7 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system  ...

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0360 Brand: GMC - ITALY Model: KGS 400/E - CE Standard Manual vertical panel saw with scoring unit for cutting panels, furniture, customer made furniture, kitchens, plastics, composite materials, aluminium and various – CE Standard Technical specifications: Cutting length 3200 mm Cutting height 1900 mm Cutting thickness 50 mm Blade diameter 250 mm Hole 20 Motor 4 Hp Scoring unit for chip-free cutting - Blade diameter mm 110 Hole 20 Circular saw shaft speed 4800 rpm Scoring saw shaft speed 7000 rpm Retractable tilting intermediate support, half-length Automatic mechanical moving frame Double lower and upper measuring index for horizontal cuts Overall dimensions of assembled machine mm 5100 x 1100 x 2800 h Overall dimensions for transport: Frame mm 5100 x 460 x 2250 h + Beam mm 2900 x 850 x 850 h Weight kg 450

cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...

Sawblade tiltable: 0-45 ° Length of the rolling table: 3.200, 3.800 mm cutting width: 1.300, 1,500 mm Motor output: 7,5 kW Cutting height: 177 mm Cutting height at 45°: 133 mm Saw blade diameter: 500 mm Speed: 3000/3600/4200 U/min. work height max.: 870 mm Dust suction hood: 1x120, 1x100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 900 mm Cutting height: 300 mm cutting width: 880 mm Motor output: 4,5 kW Table dimensions: 840 x 900 mm Table tiltable: -15° bis +45° Grad Dimensions (L/W/H): 1.800 x 1.000 x 2.800 mm machine weight ab.: ca. 1.000 kg saw band length: 6.100 6.200 mm : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)

cutting width: max. 250 mm Cutting height: max. 80 mm Saw blade diameter: 400 mm Motor output: 3,0 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +-20 mm mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw -------------------------------------------------- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system t ...

Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

"RSA Heavy Duty Sawing, Deburring, Cleaning and Drying Center" for Steel Pipes The machining center consists of: 1) RSA Precision Speed Saw RASACUT SC 3000 with Bundle Loader 2) RSA linkage between the RSA RASACUT precision high-speed saw and the RSA RASAPLAN XY 3000 deburring system 3) RSA deburring system RASAPLAN XY 3000 4) Extraction system/wet separator for RSA deburring system RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for pipes up to 6,200 mm TECHNICAL DATA Lswvuey E Iype Nu Iehf Tube Ø: 6 mm to 55 mm Wall thicknesses: 1 - 6 mm Bar weight: max. 10 kg/m Materials: Steel Magnetism: max. 3 gauss Output lengths: 6200 mm sawable lengths: 150 - 3000 mm Limitation: Ø 6 – 7.9 mm max. length: 1200 mm Ø 8 – 9.9 mm max. length: 1500 mm Ø 10 – 12 mm max. length: 2000 mm Length tolerance ...

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Professional bone saw Kolbe K330 is designed for fast, precise and safe cutting of fresh and frozen meat, bones and larger product pieces in butcher shops, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require strong performance, reliable operation and high cutting quality in daily professional use. The saw provides fast and even cutting thanks to the high blade speed of 22 m/s, ensuring efficient work and precise cuts. It is suitable for processing bones, carcass sections, large meat pieces and frozen products. Model K330 is equipped with 300 mm wheel diameter and uses a 2490 mm blade, providing stable operation, accurate blade guidance and excellent cutting results. Maximum cutting height is 320 mm, while cutting width is 280 mm. The construction is largely made of stainless steel, ensuring long service life, high hygiene st ...

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

Saw blade PEHAKA HS-820/820 lenght: 10700 width: 67

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new

Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

Raimann KS 310 Technical Data – KS 310 Max. cutting width: 310 mm Max. passage width: 650 mm Max. cutting height for multi-blade equipment: without pressure screen: 120 mm with pressure screen: 105 mm Min. cutting height: 10 mm Min. workpiece length: Standard version with pressure screen: 450 mm Machine data Chain width: 340 mm Saw shaft diameter: 65 mm Diameter of socket: 80 mm Max. saw blade diameter: 360 mm Min. saw blade diameter: 250 mm Saw blade bore (DKN 18×3.5 mm): 80 mm Saw shaft speed: 3900 rpm Feed speed, infinitely variable: 4–45 m/min Working height (from floor to top of the chain): 850 mm Weight approx.: 2200 kg Dimensions of the machine: see installation plan Suction data Chip extraction (printing unit) – extraction connection dimensions: Diameter: 250 mm Air speed: 30 m/s Air volume: 530 ...

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...

Key data: 335 mm, 565 mm

Solid and heavy band saw made in Germany. Freshly inspected and serviced The engine was professionally rewound and restored. Invoice available. Engine brake freshly adjusted. The machine was preserved with oil by the previous owner, which has caused the old paint to come off in many places. The affected areas have been repainted so that the machine is clean and protected again. The machine runs smoothly and can be tested on site. Included: some spare saw blades Landing gear for mounting Normal signs of wear present according to the age. Loading on site possible, we will of course help with loading.

Multi-blade circular saw Raimann, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg

MEP Shark 282 CCS Band Saw 3-speed 400V, 2-stage motor, runs smoothly. Infinitely variable speed from 0 to 72 RPM. Miter cuts possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum cutting capacity round: 250 mm Maximum cutting capacity square: 220 mm Maximum clamping opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125 x 70 x 190 cm Infeed conveyor dimensions: 200 x 53 x 90 cm Includes accessories as shown in the pictures.

Morsoe mitre punch, various, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control

Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

for sale MACC Metal Circular Saw NEW 300 E HSS Circular Saw Blade 300 mm Schnittkep. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 150 kg Machine base can also be purchased. Further models and inquiries to FSA Maschinen AG

Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm

Code: 0395 Brand: JOWAY - TAIWAN Model: P - 3200 TA - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of panels, furniture, doors, window and door frames, kitchens, plastics, composite materials and various – CE Standard Technical data: Anodised aluminium caqrriage length 3200 mm Dimensions of ground steel table mm 620 x 1000 Blade diameter 350 mm Hole 30 Max cutting height at 90° mm 100 Max cutting height at 45° mm 70 Motor power 7,5 Hp Speed rpm 3000/4000/5000/6000 Scoring unit blade diameter 120 mm Hole 22 - Motor power 1 Hp Dual control panel for machine start-up Electric blade lifting Programmed blade tilt Electrically adjustable scoring unit Parallelogram blade guard Overall dimensions of assembled machine mm 3200 x 3400 x 1400 h Overall dimensions for transport mm 3200 x 2100 x 1400 h Weight kg 1300