resin used for sale

Dry transformer 1600KVA Model: ABB RESIBLOC Dyn 11 Capacity 1600 KVA at 400 Volt 50 Hz. Primary field 21kV ( MULTITAP ) Primary: 19950, 20475, 21000, 21525 and 22050 Volt Secondary: 400 Volt / 2309.4 Ampere Built 2011 Approx. weight 5300 KG AS NEW, clean and available immediately.

Air-Operated Double-Acting High Pressure Pump The Resato P200-100-2 is an air-powered, double-acting high-pressure pump used for the pressure generation of liquids in various industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump works on the principle of an automatic reciprocating differential piston to convert compressed air into high-pressure fluid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-Operated, Double-Acting High Pressure Pump Air piston diameter: 200 mm Gear Ratio: 100 Flow rate:6.6 l/min Weight: 21 kg Year 2019 Max. outlet pressure Controlled by the air supply pressure, at 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type chart for P200-100-1/P200-100-2). Compatible media Suitable for water, oil or an emulsion of both. Can also b ...

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System  Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on  ...

Excenter screw pump Manufacturer: Resch Type: 2RBL 150 Built: 1998 Speed: 309 rpm Power: 0.37 kW at 1360 rpm very good condition LWH: 850 x200 x 170 mm Product inlet DM 25 (milk tube fitting) Weight: approx. 15 kg 3 in stock

Water Jet Pump Resato PJE-2-4000 Here there is a gebr. Water jet pump that has been standing around unused for over 10 years. The pump costs with an additional pressure converter and an additional control from a cannibalized pump 7,000,-- €. There are also about 100 HD seals. If you want to buy the print translators solo, they cost 1,500 €/piece There is no guarantee, warranty and to avoid misunderstandings the pump must be inspected before collection.

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public places or in private areas - the Cologne S smoking shelter with access on the right is a reliable choice for a practical and versatile shelter with timeless elegance in the outdoor area. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The stable frame construction made of hot-dip galvanized and powder-coated square steel tube guarantees durability and durability. The steel parts are primed and paint-coated (protection class: C4 medium). High-quality wall elements made of toughened safety glass shield against wind and rain. The canopy is designed in such a way that it can easily withstand even very high wind loads and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether as a smoking shelter or as a bus shelter - this canop ...

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, refrigerant silencer, discharge silencer -Manufacturer: UL Refrigeration Research, Discharge Silencer Muffler -Type: RR Muffler 823G -Connecting pipe: outer diameter 14.8 mm, inner diameter 13 mm -Pressure: up to 450 PSIG / 31 bar -Quantity: 1x muffler available -Price: per piece -Dimensions: Ø 54 x 190 mm -Weight: 0.4 kg/pc.

Plastic panels, plastic laminate, veneer panels, decorative panels, laminated panels -Manufacturer: Resopal, HPL plastic panels 37 pallets 6710 kg -different sizes: see photo parts list -Thickness: 1 mm / 1.4 mm -Sale: only complete -Dimensions: 3200/1330/H1800 mm / 3100/1330/H1850 mm / 2190/1330/H1600 mm -Weight: 3150 kg / 1640 kg / 1920 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Safety glass, glass plates, glass panes, glass transport rack, window transport rack, window racks, glass transport stands -Safety glass: 6 mm thick, 62 panes -Various sizes: see photo parts list -Transport racks: 3 pieces -Sale: only complete set -Dimensions: see photos Total weight: approx. 600 kg

France Transfo TRIHAL 2.5 / 3.5 MVA Cast Resin Transformer 11 to 15 kV / 433 V No of QTY available: 5 For Sale – High-Capacity France Transfo TRIHAL Dry-Type Transformer Available is a France Transfo TRIHAL cast-resin, three-phase dry-type transformer, manufactured by Groupe Merlin Gerin, Ennery, France. This is a substantial industrial transformer with a 2,500 kVA natural-air rating and 3,500 kVA forced-air rating, making it suitable for a wide range of industrial, commercial and infrastructure applications. Electrical Specifications Manufacturer: France Transfo / TRIHAL Type: Cast Resin Dry-Type Transformer Phases: 3 Phase Frequency: 50 Hz Rated Power: 2,500 / 3,500 kVA HV: 15 kV nominal LV: 433 V HV Current: Approx. 96.2 A LV Current: 3,333 / 4,668 A Impedance: 6.04% Vector Group: Dyn11 Cooling: AN / AF (Air Natural / Air Forced) Manufactured: 1996 Se ...

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Frizlen steel grid fixed resistor device: Art.-ID 56489 -P: 9 kW -R: 1 ohm -E: 2700 kWs -Price: per piece -Number: 2 pieces -Dimensions: 600/480/H450 mm -Weight: 42 kg

Braking resistor, charging resistor, damping resistor, filter resistor, HFD resistor -Manufacturer: Siemens, damping resistor Sinamics/Simodrive HFD resistor -Type: 6SL3100-1BE21-3AA0 -Power: 15 ohms / 800 W -Quantity: 2x braking resistors available -Price per piece -Dimensions of box: 570/300/H100 mm -Weight: 5.8 kg/pc.

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3 A -Number: 4x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3-1,8 A -Number: 2x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Siemens, braking resistor -Type: 6SE6400-4BD16-5CA0 -Power: 13 kW -Dimensions: 185/185/H285 mm -Weight: 4.0 kg

Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper -Manufacturer: SEW Eurodrive, braking resistor type BW068-004 -Item no .: 8216932 -Power: R = 68 Ohm P = 400 W -Number: 1x resistors available -Dimensions: 385/85 / H120 mm -Weight: 1.9 kg

Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW100-005 -Item no.: 826 269 1. -Power: R=100ohm P=500W -Dimensions: 255/160/H60 mm -Weight: 1.1 kg

Power resistor, wire potentiometer, resistor, braking resistor, tube resistor -Manufacturer: Frizlen, power resistor -Type: RZM10-4.7/1K -Voltage: 220 V / 50 Hz -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

Technical Specifications & Performance Data Engineered for high-throughput beverage production environments, these Accumulation Reserve Conveyors provide stable buffering and smooth product flow between process stages such as rinsing, filling, capping, and labeling. The multi-lane design balances line pressure, reduces stoppages, and protects glass containers while maintaining target output on modern industrial packaging lines. Machine type: Accumulation Reserve Conveyors Nominal speed: up to 18,000 bottles per hour (glass) Multi-lane accumulation table length: 12 meters Number of lanes: 11 lanes for mass-flow, pressureless accumulation Reserve tables in line: 2 for extended buffer capacity Chain material: Stainless steel for durability and hygienic handling Container type (current configuration): Glass bottles Typical process positions: Buffer between rinsers, fillers, cappers, labelers ...

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: SEW Eurodrive -Type: BW017-024-02 -Item no.: 17962218 -Power: 1.44 kW -Number: 3x resistors available -Price: per piece -Dimensions: 550/330/H150 mm -Weight: 10.5 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Braking resistance, charging resistance, damping resistance, filter resistance -Manufacturer: LENZE -Type: 82R 10% 200 W Article No.: 360112 -Number: 3 resistors available Price: per piece -Weight: 1.3 kg

Braking resistor, charging resistor, damping resistor, filter resistor -BW 215 -150 ohms Item No.: 8254354 -600 W -Number: 2 resistors available Price: per piece -Weight: 5 kg

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

40A 30mA RCD type AC Resi9 XE - R9ERC240 SCHNEIDER Resi9 XE Differential Switch 40A 30mA AC Type Auto 230V - R9ERC240 Set of 5 pieces This differential switch from the Resi9 range offers optimal safety for your electrical installation. This inter diff makes it possible to identify alternating current leaks and to ensure the protection of conventional circuits (lighting, socket, etc.). It is quickly installed upstream of the circuit breakers on the DIN rail of a Schneider switchboard and has a width of 2 modules. This 30mA differential can be used for new construction, as well as during an electrical renovation. Technical characteristics of this Schneider Resi9 differential switch: Current Rating: 40A Type: AC Sensitivity: 30 mA Connection: car terminals Number of modules: 2 XE System Connection Connection: screw inlet and plug-in outlet from above Accepted wire cross-section: up to 35 ...

Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm ) Width of saw pulley face-optional 5 1/2" (140mm ) Maximum width of saw-standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9,1" ( 2770mm ) Overall width 8,1" ( 2460mm ) Speed of saw pulleys,r.p.m. 8,000( 2440m/min ) Horse-power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42,6m) Shipping Specification : Standard Machine : Nett weight, lbs. 3583 Kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide f ...

Resin production plant. Capapcity 1200 tons per month. Plant can produce acrylic resins, alahide resins, poliuerethane resins on  buthyl octate base, acetone base, and xylane base. Plant can produce 55-60% resin concentrate wchich acan later be diluted in another factory. Plant has 3 main pressure reactors each 10 ton of batch. Plant has a storage tanks 160000 L tanks. Plant is build in Atex execution. More information available upon request. Advise on resin production technology, recepies and technological advise is possible on separate agreement and price. Below you can find a photo gallery of the factory, more information please call.

Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg

hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Manufacturer: Bieri, hydraulic reservoir, hydraulic tank for hydraulic power unit -Hydraulic tank: with filter and level indicator -Individual components: see photos -Dimensions: 340/245/H300 mm -Weight: 6.1 kg

Service reset tool, electronic diagnostic and reset device -Manufacturer: Vestatec, Service Reset -Type: VSR-V -Item No.: 600004 -Case dimensions: 320/275/H60 mm -Weight: 0.7 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Handover: in its current condition as inspected -Level indicator: damaged, see photos -Hydraulic reservoir: Hydraulic tank for hydraulic power unit -Tank capacity: approx. 65 L / 250x930x280 mm -Individual components: see photos -Transport dimensions: 930/440/H425 mm -Weight: 16.6 kg

Technical details Manufacturer: Schlatter AG Type: Automatic resistance wire mesh welding and production line Configuration: Wire coil pay-off stations, longitudinal wire feeding system, wire straightening units, cross-wire positioning mechanism, multi-electrode resistance welding section, welding transformers, mesh transport system, output stacking section, auxiliary roller handling and tensioning station, relay-based electrical control cabinets, pneumatic and electromechanical actuation systems. Application: Production of welded wire mesh, reinforcement mesh, fence panels, industrial mesh and construction wire products. Function: Automatic feeding of longitudinal and cross wires, resistance welding of wire intersections, mesh transport, tensioning, flattening and stacking of finished panels. Electrical system: Relay logic control architecture with contactors, transformers and te ...

RESI9 XE Vertical Comb for 25 to 63 A SCHNEIDER ELECTRIC R9EXVR RCD Sold as 5 pieces The RESI9 vertical comb from Schneider Electric is a connection accessory that is installed vertically. In addition, this device has a current rating of 63 A. Technical characteristics: Range: Resi9 Type of product or equipment: vertical connection comb Accessory Type / Separate Parts: Connection Accessories Description of the poles: 1 P + N Number of channels: 1 channel for high, type: N + P + auxiliary with 18 mm pitch / 1 channel for bottom, type: N + P + auxiliary with 18 mm pitch Current rating: 63 A Rated Operating Voltage: 230 V AC 50 Hz Ph/N Insulation voltage: 250 V AC 50 Hz Installation mode: vertical 9 mm pitch: 4 Connection pitch: 18 mm at the top - 18 mm at the bottom Height pitch dimension: 130 mm Auction-ID: A1-49412-161

RESI9 XE Vertical Comb for 25 to 63 A SCHNEIDER ELECTRIC R9EXVR RCD Sold as 5 pieces The RESI9 vertical comb from Schneider Electric is a connection accessory that is installed vertically. In addition, this device has a current rating of 63 A. Technical characteristics: Range: Resi9 Type of product or equipment: vertical connection comb Accessory Type / Separate Parts: Connection Accessories Description of the poles: 1 P + N Number of channels: 1 channel for high, type: N + P + auxiliary with 18 mm pitch / 1 channel for bottom, type: N + P + auxiliary with 18 mm pitch Current rating: 63 A Rated Operating Voltage: 230 V AC 50 Hz Ph/N Insulation voltage: 250 V AC 50 Hz Installation mode: vertical 9 mm pitch: 4 Connection pitch: 18 mm at the top - 18 mm at the bottom Height pitch dimension: 130 mm Auction-ID: A1-49412-160

RESI9 XE Vertical Comb for 25 to 63 A SCHNEIDER ELECTRIC R9EXVR RCD Sold as 5 pieces The RESI9 vertical comb from Schneider Electric is a connection accessory that is installed vertically. In addition, this device has a current rating of 63 A. Technical characteristics: Range: Resi9 Type of product or equipment: vertical connection comb Accessory Type / Separate Parts: Connection Accessories Description of the poles: 1 P + N Number of channels: 1 channel for high, type: N + P + auxiliary with 18 mm pitch / 1 channel for bottom, type: N + P + auxiliary with 18 mm pitch Current rating: 63 A Rated Operating Voltage: 230 V AC 50 Hz Ph/N Insulation voltage: 250 V AC 50 Hz Installation mode: vertical 9 mm pitch: 4 Connection pitch: 18 mm at the top - 18 mm at the bottom Height pitch dimension: 130 mm Auction-ID: A1-49412-159

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Fire Brigade Rescue Kitz, Rescue Scissors, Spreader Condition see photos.