resin used for sale

Casting resin, two-component resin, polyurethane (PUR) Casting resin CELLPACK TYPE G 2 x 1,2 x 1,75 kg DIN VDE 57 291 Application: GNW - 1 kV GMW - 10 kV GFW - Telecommunication and signal cable unused ! Dimensions: 320 x 200 x 60 mm

DI resin 0.4 l MA-103081 larger quantities possible on request

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible.

Piovan granulate tank, + inverter+ PLC #5249 With safety top door. Tank diameter 650 mm Tank height: 800 mm Overall size: 650x800x1300 mm

We present a selection of high-quality dry transformers, including the 1600/20/04 and 2000/20/04 models. These transformers are designed for efficient and reliable power distribution in various industrial applications. Features: - Model 1: 1600/20/04 - Power: 1600kVA - Primary voltage: 20kV - Secondary voltage: 400 - Model 2: 2000/20/04 - Power: 2000kVA - Primary voltage: 20kV - Secondary voltage: 400V Properties: - Reliable performance: These dry transformers provide efficient and consistent power distribution to ensure smooth operations and minimal downtime. - High efficiency: The transformers are designed for energy efficiency in order to minimize power losses and optimize energy consumption. - Compact Design: The space-saving design allows for easy installation and flexibility in various industrial environments. - Durability: Constructed with robust materials, t ...

Power: 1250kVA, max. voltage: 21kV, max. current: 120.28A, weight: 3.79t, without spare parts, accessories or documentation, an on-site inspection is possible.

Vacuum chamber dimensions: 800x670x550mm, product carrier dimensions: 730x570mm, working container capacity: 60l, storage container capacity: 60l, dynamic mixer, two different materials possible with common hardener, on-site inspection is possible.

Capacity container A/ B: 60/ 45l, connected load: 6.3kW, length: 1570mm, width: 736mm, height: 1755mm, weight: 420kg.

For sale, Dry transformer of 800kVA 10kV to 400 Volt In good working condition

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

This Fortus 450mc has been used very little. The number of operating hours is approx. 260h and the last maintenance was carried out in 07/2019., operating hours: approx. 260 hours, Installation: 02/2021, Installation space in mm (x/y/z): 406×355×406mm, software: Control Center™, GrabCad Print (Download), Insight Software License, network connection: LAN (Ethernet), operating system: Microsoft Windows Server 2012 R2, Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-ESD7™, ABS-M30, ABS-M30i, Addigy® PA6/66-GF20 FR LS, Antero 840CN03, Antero™ 800NA, ASA, FDM HIPS, FDM Nylon 12CF, FDM Nylon 12™, Kimya Kepstan® PEKK-SC , Kimya PC-FR, PC, PC-ABS, PC-ISO™, ST-130, ULTEM® 9085 Resin (colored), ULTEM™ 1010 resin, ULTEM™ 9085 resin, Victrex AM™ 200, Layer thickness: 0,127mm, numb ...

Formlabs Form 3L Wholesome Package including Form Wash L and Form Cure L. All devices ran for a very short time: approx. 50 hours. Year of construction 2022, commissioning October 2022. Accessories: 2L each of Resin Tough 2000, High Temp, Rigid 10K and a separate tank for each type of resin., Installation space in mm (x/y/z): 335x200x300, Layer thickness: 25-300 microns, laser power: 2x 250mW, Resin refilling automatic or manual: Automatically, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0

Large item of paints and varnishes in large containers of 25 litres and 30 litres. Multiple times present. Also to be handed over individually, inexpensive! Clou Acocryl Rapid 30 litres - multiple times available (approx. 7 pcs) Cloupur Dilution aromatic-free 30 litres Clou Acocryl - Hardener 30 litres Clou delayer for nito and DD coatings 5 litres 2x present Hesse Lignal UNA-Color Topcoat DB555-9005 2 K-Pur acrylate resin lacquer 25 liters 4 pieces available - RAl 9005 (Black), list price per litre approx. 12 EUR Hesse Unapur topcoat DE 554 2 K-Pur acrylate resin lacquer 25 litres 2x present Hesse Rustic Pickle NCL 5-53552 25 litres Lignal Universal DelayDV 499 Special dilution to extend processing time 25 litres All containers unopened. Complete acceptance or individual acceptance, please against bid. All data in approx. units of measure. Special price

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s Height: 1900 mm Width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Design data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Type: Cast resin Upper voltage: 10 kV Low voltage: 400-230 V Circuit: Dyn5 Year of construction: 2010 Weight: 1.8 t The depressurization of the switchgear is carried out via a pressure relief chamber in the lower area of the control panel Data: Inspection r ...

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

Aboveground, double-walled stainless steel tanks used according to DIN 6616/2 for the storage of liquid fertilizer ASL/AHL - emptied, cleaned- incl. 2 saddle feet, 1 DOM, 1 leak detector-test report Size: 50.000 litres Diameter: 2,500 mm Length: 10,700 mm Weight: 9,200 kg The tank has a brand new, suitable for liquid fertilizer (ASL/AHL) plastic inner sleeve. This plastic sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL/ASL, as well as NOx reduction agent AUS 32 (AdBlue). Also, we can provide the container with an internal coating of epoxy resin. This coating is also approved for liquid fertilizer (ASL/AHL). In addition, the container if necessary is outside completely sand-blasted, primed and then painted in an any RAL color. The container can be equipped additionally w ...

GS12 - used approx. 26 m³ / 26,000 litres steel tank, gravel filter, pressure tank, water cistern. The container is used and in good condition. capacity: 26.2 m³ / 26,200 litres material: steel tank, pressure tank 6 bar outer dimensions: approx. Ø 2.90 m x height 5.70 m inner dimensions: approx. Ø 2,80 m x height 3.80 m weight: 6 tons output: 42 m³/h year of production: 2000 comm. nr. 22857/3 other: painted blue, threefold epoxy resin coating inside Aboveground pressure tank made of steel, standing vertically on four feet, with two acces holes DN500, one DN300, former gravel filter. Incl. flanged / welded nozzle floor with screwed-in filter nozzles, inner mud funnel, all required connections for untreated water inlet, treated water outlet, backwash in- and outlet and ventilation. This steel tank can be used as gravel filter for filtration, de-icing and  ...

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

Description: Design : Casting resin transformer Design: Dry Make : SGB Built: 2010 Condition : new Rated power: 1000 KVA Overvoltage: 10 KV +- 2 x 2.5% Undervoltage: 400 V Switching group: Dd6y 5 Frequency: 50 Hz Cooling type: AN Total weight: 2410 Kg If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: M. Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de

Cleanming and Degreasing Plant Part washing system - Part cleaning system - Degreasing system Manufacturer: Reintec Previously used detergents / detergents: acetone, caustic soda Previous use: Cleaning of cast resin molded parts System and workpiece holders stainless steel Spray washing process 3-chamber system Inner chamber: washing chamber with nozzle system Outer chambers for reciprocal assembly of washing baskets Mounting systems or baskets for various workpiece shapes and dimensions available Dimensions total approx. 600 x 130 x height 200 cm

Storage tanks/ steel tanks/ water tanks/ water cistern without pressure Volume: 60.000 liter 8 items available! UNI-OFF-FOR B. No. 20-133 A-H GL Steel tanks (wine storage tanks) standing on 4 conical feet and coated with epoxy resin inside Dimensions: Diameter approx. 4.200 mm cyl. Height approx. 3.780 mm Total height with feet approx. 5.100 mm Tanks with dished bottoms Wall thickness: jacket 12 mm, floors 11.5 mm In the middle of the topsoil: 1 block flange DN 50 On the coat: 1 manhole 450 x 350 swiveling 1 flange connector NW 50 2 block flanges NW 20 In the middle of the sub-floor: 1 block flange DN 65 otherwise according to Sketch + photos

Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns pressureless, standing Content: 30,000 litres Available: 4 pieces UNI-OFF-FOR B. No. 20-137 GL internal epoxy resin-coated steel containers (wine tanks) Dimensions: Diameter approx. 3,000 mm Zyl. Height approx. 3,820 mm Total height with feet approx. 5,000 mm Containers with curved floors Wall thicknesses: sheath 9 mm, floors 10 mm on top floor in the middle: 1 block flange DN 50 on the coat: 1 manhole 450 x 350 swivel 1 flange trim NW 40 2 Block flanges NW 20 in the middle of the underbody: 1 block flange DN 65 otherwise according to sketch + photos

40,000 litres of earth tank for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 8,70m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and A-deck capsule according to DIN 1 ...

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

description: Design : Cast resin transformer Design: Dry Make : SGB Built: 2010 Condition: New Btz0idkxtd Rated power: 1000 KVA Medium voltage: 10 KV +- 2 x 2.5% Low voltage: 400 V Switching group : Dd6Y 5 Frequency: 50 Hz Cooling type :AN Total weight: 2410 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

Description: 12 New Transformers Design : Cast resin transformer Design: Dry Make : TESAR Built: 2012 Condition: New Rated power: 1250 KVA Medium voltage: 20 KV +- 2 x 2.5% Low Voltage: 270 V Solar Transformers Vueuqq Switching group: DYN 5 Frequency: 50 Hz Cooling type :AN Total weight: 3450 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge),  ...

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](https://en.wikipedia.org/wiki/Cerium(IV)_ox ...

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 530 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Table area: 502 x 502 mm Ram area: 530 x 500 mm Length: 1600 mm Depth: 1200 mm Height: 2300 mm Weight: 2 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Possible to program: - different temperatures - holding time of press under pressure - multiple cycles Capacity: 600 ton Passage between uprights: 1020 mm Stroke: 400 mm Distance between table -- ram: 400 mm Table: 1000 x 1000 mm Length: 1590 mm Depth: 1150 mm Height: 3700 mm Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220-240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Multiple cycles can be programmed Press with 2 pistons: Capacity lower piston: 750 ton (with digital readout for applied force) Capacity upper piston (counter pressure): 250 ton (with digital readout for applied force) Passage between uprights: 850 mm Distance between table -- ram: 500 mm Table: dia 800 mm Weight of press: 14 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3700 mm Weight: 14 ton

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with 3 heated tables + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 150 ton Passage between uprights: 670 mm Max stroke: 600 mm Distance between table -- ram: 600 mm Table: 670 x 670 mm Length: 1120 mm Depth: 1200 mm Height: 3600 mm Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3600 mm

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

We offer a Doka Frami wall and foundation formwork 223m² complete with many accessories. The formwork is 90% newly covered with new Finply birch formwork 220- 240g/m²phenolic resin coating. The rest of the elements are controlled and sorted and covered with original Doka Xlife formlining. Fair-faced concrete class 2/3 possible without any problems. New value approx. 156108,00€ Special price 62359,00€ 3 Frami Xlife element 0,90x2,70m 1 Frami Xlife-Uni-Element 0,90x2,70m 3 Frami Xlife element 0,75x2,70m 3 Frami Xlife element 0,45x2,70m 19 Frami Xlife Element 0,30x1,50m 2 Frami Xlife element 0,45x1,50m 51 Frami Xlife element 0,60x1,50m 35 Frami Xlife element 0,75x1,50m 2 Frami Xlife element 0,75x1,50m 7 Frami Xlife element 0,90x1,50m 6 Frami Xlife element 0,90x1,50m 9 Frami inner corner 1,50m 20cm 2 Frami inner corner 1,50m 20cm 7 Frami outer corner 1,5 ...

Machine name: Vertical Heating Cooling Mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year of construction: 2005 Speed: 104 / 300-1500 rpm Operating hours: Very few operating hours Material: Stainless steel Drive motor: 11 / 45 kW Design: ATEX version / explosion-proof Total capacity: Heating mixer: 210 liters / Cooling mixer: 391 liters Wetted parts: 1.4541 Gearbox: bevel gear motor / motor frequency-controlled Dimensions: L 4605 x W 4225 x H 3550 mm Tech. Documentation: Yes Note: Technikum Betrieb. Wood chips / melanin resin additives Accessories: Stage with stairs, temperature control unit 30 kW, platform scale, control panel, control cabinet, dust filter

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...