british flag
Resale Logo

recycling used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information shopfitting  Bermatec Kassen & Waagensysteme  http://www.bermatec.de 
banner logo
start page > keywords recycling > results
571 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121111998 502

BERMATINGEN DIXI 18 S for sale
Baling presses


Manufacturer: BERMATINGEN Type: DIXI 18 S Serial No.: 104986 Year of build: 2007 gebr. Maximum pressing force: 180 kN Maximum operating pressure: 180 bar Press cycle: approx. 25 s Motor: 4 kW Operating voltage/ ...
used machine
 
Manufacturer: BERMATINGEN
Type: DIXI 18 S
Serial No.: 104986
Year of build: 2007 gebr.

Maximum pressing force: 180 kN
Maximum operating pressure: 180 bar
Press cycle: approx. 25 s
Motor: 4 kW
Operating voltage/frequency: 400 V / 50 Hz

Feeding tube (valve) Wxh: approx. 1,070 x 620 mm
Filler height from ground: 960 mm
Bale size: approx. 1.100 x 700 x 700-820 mm
Number of bindings: 4
Machine dimensions (Lxwxh): approx. 1,530 x 930 x 1,970 mm
Width with door open: 2,220 mm
Weight: 880 kg

Additional information:

â?¢ Bale height adjustable â?¢ bale weight material-dependent CA. 140-220 kg

â?¢ On both sides of extrusion die and generously dimensioned hydraulics

â?¢ Low-maintenance, technical concept:
Equipped with microprocessor control

â?¢ LCD display for individual requirements:
Pressure switch for carton/film, variable bale height and adjustable pressing time
2007
Price  
    request
121111964 502

BERMATINGEN DIXI 18 S for sale
Baling presses


Manufacturer: BERMATINGEN Type: DIXI 18 S Serial No.: 104375 Year of build: 2006 gebr. Maximum pressing force: 180 kN Maximum operating pressure: 180 bar Press cycle: approx. 25 s Motor: 4 kW Operating voltage/ ...
used machine
 
Manufacturer: BERMATINGEN
Type: DIXI 18 S
Serial No.: 104375
Year of build: 2006 gebr.

Maximum pressing force: 180 kN
Maximum operating pressure: 180 bar
Press cycle: approx. 25 s
Motor: 4 kW
Operating voltage/frequency: 400 V / 50 Hz

Feeding tube (valve) Wxh: approx. 1,070 x 620 mm
Filler height from ground: 960 mm
Bale size: approx. 1.100 x 700 x 700-820 mm
Number of bindings: 4
Machine dimensions (Lxwxh): approx. 1,530 x 930 x 1,970 mm
Width with door open: 2,220 mm
Weight: 880 kg

Additional information:

â?¢ Bale height adjustable â?¢ bale weight material-dependent CA. 140-220 kg

â?¢ On both sides of extrusion die and generously dimensioned hydraulics

â?¢ Low-maintenance, technical concept:
Equipped with microprocessor control

â?¢ LCD display for individual requirements:
Pressure switch for carton/film, variable bale height and adjustable pressing time
2006
Price  
    request
121098320 502

FORTSCHRIT Fortschrit for sale


 
Price  
    request
121098232 502

BERMATINGEN DIXI 18 S for sale
Baling presses


Manufacturer: BERMATINGEN Type: DIXI 18 S Serial No.: 104374 Year of build: 2006 gebr. Maximum pressing force: 180 kN Maximum operating pressure: 180 bar Press cycle: approx. 25 s Motor: 4 kW Operating voltage/ ...
used machine
 
Manufacturer: BERMATINGEN
Type: DIXI 18 S
Serial No.: 104374
Year of build: 2006 gebr.

Maximum pressing force: 180 kN
Maximum operating pressure: 180 bar
Press cycle: approx. 25 s
Motor: 4 kW
Operating voltage/frequency: 400 V / 50 Hz

Feeding tube (valve) Wxh: approx. 1,070 x 620 mm
Filler height from ground: 960 mm
Bale size: approx. 1.100 x 700 x 700-820 mm
Number of bindings: 4
Machine dimensions (Lxwxh): approx. 1,530 x 930 x 1,970 mm
Width with door open: 2,220 mm
Weight: 880 kg

Additional information:

â?¢ Bale height adjustable â?¢ bale weight material-dependent CA. 140-220 kg

â?¢ On both sides of extrusion die and generously dimensioned hydraulics

â?¢ Low-maintenance, technical concept:
Equipped with microprocessor control

â?¢ LCD display for individual requirements:
Pressure switch for carton/film, variable bale height and adjustable pressing time
2006
Price  
    request
121097763 505

LINDEMANN PZA8-55S for sale
hammer mill


Stock number: U2245 Used carbon steel hammer mill by Lindemann (Germany) type PZA8-55S. Machine has feeding inlet with dimensions length 1010 mm x width 660 mm x depth 450 mm. Milling chamber has dimensions: length 1430 ...
used machine
 
Stock number: U2245
Used carbon steel hammer mill by Lindemann (Germany) type PZA8-55S. Machine has feeding inlet with dimensions length 1010 mm x width 660 mm x depth 450 mm. Milling chamber has dimensions: length 1430 mm x width 550 mm. Inside the milling chamber is installed rotor with diameter 800 mm x width 550 mm. On the rotor there are 4 shafts with hammers. Each shaft has installed 14 hammers. Total number of hammers is 56 pcs. Each hammer has thickness 10 mm. Bottom discharge of product. Side doors with static knives from both sides of rotor are operated hydraulically. Rotor is directly driven by electric motor 75 kW, 1480 rpm, 380 V, 50 hz. Machine is mounted on carbon steel frame with three rubber supports.
 
Price  
  PL   request
121093043 502

BERMATINGEN DIXI 18 S for sale
Baling presses


Manufacturer: BERMATINGEN Type: DIXI 18 S Serial No.: 104373 Year of build: 2006 gebr. Bi77kqel Maximum pressing force: 180 kN Maximum operating pressure: 180 bar Press cycle: approx. 25 s Motor: 4 kW Operatin ...
used machine
 
Manufacturer: BERMATINGEN
Type: DIXI 18 S
Serial No.: 104373
Year of build: 2006 gebr.

Bi77kqel
Maximum pressing force: 180 kN
Maximum operating pressure: 180 bar
Press cycle: approx. 25 s
Motor: 4 kW
Operating voltage/frequency: 400 V / 50 Hz

Feeding tube (valve) Wxh: approx. 1,070 x 620 mm
Filler height from ground: 960 mm
Bale size: approx. 1.100 x 700 x 700-820 mm
Number of bindings: 4
Machine dimensions (Lxwxh): approx. 1,530 x 930 x 1,970 mm
Width with door open: 2,220 mm
Weight: 880 kg

Additional information:

â?¢ Bale height adjustable â?¢ bale weight material-dependent CA. 140-220 kg

â?¢ On both sides of extrusion die and generously dimensioned hydraulics

â?¢ Low-maintenance, technical concept:
Equipped with microprocessor control

â?¢ LCD display for individual requirements:
Pressure switch for carton/film, variable bale height and adjustable pressing time
2006
Price  
    request
121093002 503

WILLIBALD MZA 4300 for sale
Woodchoppers


Schredder Willibald MZA 4300, BJ. 2009, 6.300Bh, 430PS MAN diesel with currently valid emission standard, extra long discharge conveyor, radio, central lubrication, hydr. Wellenzieher, reversing fan, Radantrieb.Die machi ...

 
Schredder Willibald MZA 4300, BJ. 2009, 6.300Bh, 430PS MAN diesel with currently valid emission standard, extra long discharge conveyor, radio, central lubrication, hydr. Wellenzieher, reversing fan, Radantrieb.Die machine is in a good condition immediately fit.
Shredder Willibald MZA 4300, built in 2009, 6,300 working hours, 430 hors powers one engine with current applicable emission standard, sonderanlagen, remote control, central marsoner system, hydr. shaft puller, reversing fun, wheel drive system. The machine is in a realy good condition and immediately available.

Contact at: rerec@web.de
or mobile: 0049 16096232593
 
Price  
    request
121080755 503

KOMPTECH TERMINATOR 3400 S for sale
Shredders


1pc used crushing plant â?¢: single-shaft shredder for tires, garbage, plastic or wood stationary â?¢ Manufacturer: KOMPTECH â?¢ Type: Terminator 3400 S â?¢ built in 2005 / ...

 

1pc used crushing plant â?¢: single-shaft shredder for tires, garbage, plastic or wood stationary
â?¢ Manufacturer: KOMPTECH
â?¢ Type: Terminator 3400 S â?¢ built in 2005 / overhauled komptech 6/2016
â?¢ Betriebstd. About 8.900 h â?¢: a set of new tools, depending on the material to be processed
â?¢ Motor 160 kw bilateral roller drive
â?¢ Task level 2, 60 m
� Wavelength 3000 mm Wellendurchmesser1050mm � power: 160 kW, maximum speed 29 Umin-1 � with continuous cutting gap adjustment � capacity approx. ´ up 50to/h
â?¢ Remote control / control in the container â?¢ weight. approx. 16.5 to â?¢ immediately available
very good-ready condition

 
Price  
    request
121080729 502

DIXI 16 S for sale
Baling presses


â?¢ Serial number: 6150112820 â?¢ Voltage: 380 V ~ 50 Hz â?¢ Power: 4 kW

 
â?¢ Serial number: 6150112820
â?¢ Voltage: 380 V ~ 50 Hz
â?¢ Power: 4 kW
 
1,500 €  
    request
121068206 502

BERMATINGEN DIXI 18 S for sale
Baling presses


Manufacturer: BERMATINGEN Type: DIXI 18 S Serial No.: 616 01228 06 Year of build: 2006 gebr. Maximum pressing force: 180 kN Maximum operating pressure: 180 bar Press cycle: approx. 25 s Motor: 4 kW Operating vo ...
used machine
 
Manufacturer: BERMATINGEN
Type: DIXI 18 S
Serial No.: 616 01228 06
Year of build: 2006 gebr.

Maximum pressing force: 180 kN
Maximum operating pressure: 180 bar
Press cycle: approx. 25 s
Motor: 4 kW
Operating voltage/frequency: 400 V / 50 Hz

Feeding tube (valve) Wxh: approx. 1,070 x 620 mm
Filler height from ground: 960 mm
Bale size: approx. 1.100 x 700 x 700-820 mm
Number of bindings: 4
Machine dimensions (Lxwxh): approx. 1,530 x 930 x 1,970 mm
Width with door open: 2,220 mm
Weight: 880 kg

Additional information:

â?¢ Bale height adjustable â?¢ bale weight material-dependent CA. 140-220 kg
2006
Price  
    request
121051545 502  

WEIMA Bricketierpresse for sale
Briquetting presses


Weima Briketierpresse used broken completely with feeding unit

 
Weima Briketierpresse used broken completely with feeding unit
 
2,000 €  
    request
121047908 502

AVERMANN Avos 1810 for sale
Baling presses


We sell an AVOS channel baling presses 1810 year 2011 to conveyor. Technical data: AVOS 1810 S-60/80 year end 2011 Machine length 11200 mm Machine width 2400 mm Filling shaft cross-section 1800 x 1000 mm Unlade ...
used machine
 
We sell an AVOS channel baling presses 1810 year 2011 to conveyor.

Technical data:

AVOS 1810 S-60/80 year end 2011
Machine length 11200 mm
Machine width 2400 mm
Filling shaft cross-section 1800 x 1000 mm
Unladen weight 26000 kg
Bale size 1100 x 750 mm
Pressing power 800 kN

Zufürband 1.80 m wide

Press in perfect condition. Fully serviced December 2016.
At the Zufürband, the belt must be revised.
Pick-up location: 26683 Sedelsberg
Price is plus the statutory value added tax.
2011
40,000 €  
    request
121039312 502

HSM KP 88 for sale
Channel baling presses


Max. pressure: 8,5 - 9 tons Year of production: 2007-2010 Unit pressure: 34-36 tons/m² Cross-section of the channel: 500 x 500 mm Filling inlet: 400 x 450 mm Supply: 400 V/ 4 kW Bale tying: manu ...
used machine
 
Max. pressure: 8,5 - 9 tons
Year of production: 2007-2010
Unit pressure: 34-36 tons/m²
Cross-section of the channel: 500 x 500 mm
Filling inlet: 400 x 450 mm
Supply: 400 V/ 4 kW
Bale tying: manual
2010
3,140 €  
  PL   request
121033225 503

WEIMA HACKER Hacker for sale


Weima hacker wave width 600 mm funnel opening 600/800 mm very good condition still in operation

 
Weima hacker wave width 600 mm funnel opening 600/800 mm
very good condition still in operation
 
8,000 €  
    request
120987591 502

HUSMANN SPB 22 SEN for sale
Pressing containers


Press container Husmann SPB 22 SEN Year of build 208 Pressure 34 ton Recording hook (two-sided) Entladetur: Seidescharnierend With HKI with Bammenssystem
used machine
 
Press container Husmann SPB 22 SEN
Year of build 208
Pressure 34 ton
Recording hook (two-sided)
Entladetur: Seidescharnierend
With HKI with Bammenssystem
2008
Price  
    request
120987587 502

Ludden & Mennekes 22 GN for sale
Pressing containers


Press container Ludden & Mennekes 22 GN Year of manufacture 2010 Pressure 34 ton Recording hook Entladetur: Silk hinged
used machine
 
Press container Ludden & Mennekes 22 GN
Year of manufacture 2010
Pressure 34 ton
Recording hook
Entladetur: Silk hinged
2010
Price  
    request
120987581 502

MEULENBROEK KPC 10L for sale
Pressing containers


Press container Meulenbroek KPC 10 L Built in 2003 Pressure 34 ton Recording hook and steel Entladetur: Topscharnierend
used machine
 
Press container Meulenbroek KPC 10 L
Built in 2003
Pressure 34 ton
Recording hook and steel
Entladetur: Topscharnierend
2003
Price  
    request
120987577 502

MEULENBROEK KPC 10L for sale
Pressing containers


Press container Meulenbroek KPC 10 L Year of construction 1998 Pressure 34 ton Recording hook and steel Entladetur: Topscharnierend
used machine
 
Press container Meulenbroek KPC 10 L
Year of construction 1998
Pressure 34 ton
Recording hook and steel
Entladetur: Topscharnierend
1998
Price  
    request
120974159 502

HSM VK12 for sale
Channel baling presses


Max. pressure: 16 tons Year of production: 1991 Unit pressure: 45,7 tons/m² Number of strappings: 3 - fold horizontally Cross-section of the channel: 700 x 500 x 600-1200 mm Bale tying: automatic, wire Bal ...
used machine
 
Max. pressure: 16 tons
Year of production: 1991
Unit pressure: 45,7 tons/m²
Number of strappings: 3 - fold horizontally
Cross-section of the channel: 700 x 500 x 600-1200 mm
Bale tying: automatic, wire
Bale weight: 100-200 kg
Supply: 400 V/ (7,5kW main motor)


The machine is fully operational after service and after PREMIUM paint renovation.

1991
12,170 €  
  PL   request
120959566 505

R&B 1200x1200 for sale
Filtering units


Motor drive chain emptying Chamber filter press.
used machine
 
Motor drive chain emptying Chamber filter press.
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country