receiving used for sale

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 1 consisting of: 1 acceptance funnel 1 Armbruster destemmer with 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 12.5 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2004 - Capacity: approx. 3300 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2600 x 1600 x 1250 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2004 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Worki ...

for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 2 consisting of: 1 acceptance funnel 1 Armbruster destemmer 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 8 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2001 - Capacity: approx. 3500 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2950 x 1660 x 1000 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2001 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Working princ ...

Horizon ST-R stacker receiving tray - stack opportunities: flat or laterally shift - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600 - sheet size: max. 450x310mm; min. 185x128mm; - stack height: max. 320mm - dimensions: 652x550mm; very good

Acceptance bunker, acceptance hopper, bulk hopper with conveyor belt used Manufacturer: GE Maschinenfabriek GRINICH B.V. Built: 1998 VA stainless steel Bandwidth approx. 600 mm Drive: 0.25 kW Receiving container approx. 6.8 x 2.9 x 1.8 m Total dimensions: approx. 6.8 x 2.9 x 3.3 m The reception bunker was used in the food industry in a plant for the further processing of vegetables, cabbage and fruit. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

2 pieces of grain receiving with trough chain conveyor 150t/h, length 18 meters x 3 meters, 54 gratings drivable 20 tons. Wheel pressure. Tel. 01715213204

Criss-Cross Auslage / Criss-Cross Receiving Tray Horizon SW-12 Year 2006 - Serial-No. 101117 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm)  ...

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Model: M130 The machine is massive, made entirely of stainless steel. Equipped with a protective cover on the neck and on the receiving hopper. The neck is massive, cast with spiral grooves. The tool set of the machine consists of a large working auger, a massive nut, knives with a cast plate Robot C4 - 2 pcs., kidneys - 2 pcs., grids of sizes: 3,4,5,5,7-8, 10 and 13 mm. , distance sleeve - 2 pcs., Mercedes - fixing sleeve The machine is extremely reliable. The electrical components and bearings used in the machine are of leading global brands. Powerful motor – 8 kW, built into the machine. There is an additional lever for automatic extraction and easy disassembly of the tools. Technical data: - neck diameter: 130 mm. – capacity of the receiving hopper 65 l. – 2 auger speeds – 5 cutting tools The machine is patented and has a CE ...

Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - wi ...

Press type JJZ-CP designed for the production of plywood, doors, MDF boards. Feeding and receiving glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue dispensers. Technical data: -max. pressure 500T/adjustable/ -max. charge height 1300mm -max. size of the batch 1300x2500 -dimension of the press 3600x1370x4500 mm - foundation of the press ~500 mm below the floor level - feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -CE mark - capacity of 6 batches per hour Currently, we use the presses to glue board doors and MDF boards. Very good technical condition. We offer a plywood production line dedicated to these presses.

MS UBS-6-90 circular sawmill - German production - high efficiency - DTR - year of production 2007 - possibility of installing 6 shields - daily capacity up to 200 m3 max. log diameter 390 mm cutting width from 80 to 250 mm width of the additional board from 18 to 80 mm disc diameter 1000 mm electric disc spacing engine power 2 x 90 kW feed speed continuously adjustable 5-30 m / min 4 kW feed motor power length of the feeding table 8000 mm feed table with chain turners dimensions of the cross feeding table 4500 x 7000 mm length of the receiving table 5600 mm dimensions of the corrugated receiving table 4000 x 4000 mm reception of sawdust with vibrorine two lasers total length 18.5 m weight of the sawmill 9.8 tons

Coffee maker / Coffee maker DISCAF TF-120 Charge / hopper 120-180 kg MIXTED ROASTER TF-120 Machine with a capacity of 120 kg for batch, for to roast automatically the coffee and nuts. Equipment: Load chute. Pneumatic register. Internal drum with motor. Outer drum isolated Swing-bohter triggered through pneumatic cylinder. Pneumatic control box. Smoke aspiration fan. Combustion chamber Husk cyclon. COOLER Coffee cooler, manufactured in stainless steel and with the following elements: Entry hopper. Receiving cylinder. Internal remove blades. Support cylinder. Transmission through motor. Lids with rapid opening closes to facilitate his cleanliness. Inferior trays for the residues captation. Ventilating aspiration. Exit hopper. VERTICAL AUGER FEED ELEVATOR Auger feed elevator. Manufactured in stainless steel and with the following elements: Hop ...

Machine underwent extensive renovations with verification of all components and was completely modernized with Siemens S-7 electronics. The device includes: - Depalletiser - Bottle collecting table - Transporters, including some receiving drills - Pallet storage - Full pallet conveyor - Magazine cardboard dividers Yield: approximately 30 000 b/h. For more informations, please contact by e-mail or phone.

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

High-frequency Fraesspindel Precise Type PKZ 50/51 with SK40 for mounting in the spindle of a milling machine and collet holder for receiving the cutter. Speed range 15,000-60,000 rpm Manufacturer Precise Control unit PVSF1 Waerme exchanger PWK17-8 Spindle PK 50/51 without automatic Tool. fully operational Special price! More information on request

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Marcel Spiedo 1200 Machine Spiedo 1200 produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with two drums to load meat, receiving the tape (200 mm) trolley for example: the additional tools (1750 x 690 x 620 mm) Specification: Brand: Marcel Spiedo Model: 1200 Unit size: 1490 x 1050 x 2600 (mm) Weight: 500 kg Power supply: 400V 50 Hz 3N Total power: 0.5 kW Made of stainless steel

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and  ...

stacker receiving tray ST-20 shifting each collated set laterally, separating collated sets a stack of collated sets can be unloaded on a wheeled pallet max. sheet size: 320x450 mm min. sheet size: 128x185 mm pile height: 320 mm Separation: 30 mm dimensions: 55x57.5x73 cm net weight: 56 kg

Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

4 lifting devices are for sale 2 x 1 compartment for receiving two powder guns 2 x 2 compartment duplex for recording 4 powder guns . Lifting devices with trolley chain guide, With drive motor and transmission, As well as with incremental encoder. Inductive switch top / bottom . Connections guided to Harting plug

Pipe end notching machine make PEDI type Gr. IIITool receiving width: 280 mmmax. pipe diameter 90 °: 90 mmwith notch 45 °: 50 mmCurrently equipped with maximum number of tools: 3 toolsTool size: 50 to 50 mmTool size: 45 to 50 mmTool size: 3/4 to 3/4 Diameter of the eccentric shaft: 70 mmDrive power: 2.2 kWWeight: 750 kgExternal dimensions L x W x H: 800 x 1000 x 1650 mmWith- additional tools:46 to 50 mm, 1 to 1- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Feed speed infinitely adjustable: 0.01 - 10 mm/min Feed depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

PROJECT PALLETIZING SYSTEM FOR BUCKETS KUKA palletizing robot with 3-fold gripper for bucket and bucket receiving tape - 1 KUKA robot - KR 210 with KRC2 - 2 bucket positioning belts with centering - 2 pallet fixing frames - 1 fencing of the robot cell incl. safety light curtain

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

Universal crimping system for tank bottoms or container bottoms of all kindsFabr. ECKOLD type BA 75, year of construction 1976Max. Floor size: 4000 x 4000 mmMax. Material thickness aluminum: 5.0 mm: Steel: 4.0 mm: VA: 3.0 mmHorizontal reach: 2150 mmVertical projection: 1320 mmhydr. Cylinder stroke: 1000 mmMax. Pressure: 110 barMax. Compressive force: 55 kNDrive power: 7.5 kWOutside dimensions approx: 3030 x 1030 x 1410 mmWith- Swiveling extension arm 0 - 200 °- built-in hydraulic cylinder- Flare shape receiving head- turntable- Hydraulic unit- pneum. Lifting and balancing device (Conco-Balancier)- mobile crimping device and pressure tongs type B 75 - 50xa0xa0 Worker 7.5 Mpxa0xa0 Pressure 490 barxa0xa0 Horizontal reach 150 mmxa0xa0 Projection vertical 230 mmxa0xa0 Weight approx. 45 kgThe universal flaring system is suitable for flanging all common tank or container bottoms in round, oval ...

Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.

-The machine is fully automated as a working process. Automatic filling with lifting device for standard carts type Laska 200 liters. The entire receiving hopper is automatically tilted by means of hydraulics and the mixture is unloaded in seconds. -With the help of the 2 Z-shaped augers, the highest quality and gentle mixing is carried out, especially important for achieving the structure of the minced meat! The machine is optionally equipped with a vacuum and a vacuum pump! Completely factory refurbished with delivery installation samples and training and 1 year warranty.

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...

The machine is completely factory refurbished with a 1 year warranty. Delivery, installation, samples and training included in the price. Vacuum Pump Buch. Pulsating vacuum. Setting programs with work/pause and stepless smooth adjustment of the revolutions of the receiving hopper.

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

Circular saw TR 800 LIGNUM – for piles –Manual – feed on the inverter TECHNICAL PARAMETERS: horizontal ground clearance 480 mm vertical clearance 300 mm Min. workpiece length 1300 mm cutting width 65 – 340 mm height of sawn material 10 – 280 mm possibility to work on 2 and 4 discs saw type Ø 800 mm main drive motor power 37 kW feed drive motor power 1.1 kW feed table length 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000 mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable construction – production of the Polish renowned brand LIGNUM – a leader among manufacturers of sawmills – recommendable – for every professional

-Electric control -Cooling as desired - water or air -Stainless details and stainless evaporator -Direct transmission -Easy access to components -ABS Plastic cover -Highly efficient machine without losses -Net dimensions: 920 / 594 / 867 mm. -Receiving hopper with a capacity of 55 kg. - Power supply: 230 / 50 / 1 - Power: 820 watts - Refrigerant: R452A -1 year warranty Category: Ice generators Label: Ice

Storti RM 500 edger - Italian production - Year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

roll diameter: 500 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 110 kW Condition: used, overhauled Specification: rolling mill 500 x 1500 mm - used - roll diameter: 500 mm - roll length: 1500 mm - monoblock - motor under the rolls - fixed friction between the rolls - Rolls: with core bore, with central chamber for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable material guide jaws made of steel - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - New safety brake for NOT STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety rods bi-directional - New electrical control cabinet with PLC system S7-1200 - New fr ...

Dimensions: 3900 x 2100 x 2100 mm Passage chamber: 1500 x 1500 mm; 2 pieces Screen permeable grain size: 1.8 mm Receiving funnel size: 1100 x 210 mm Outlet opening screened material (fine): diameter 200 mm 2 pieces Spout opening coarse material (remainder): 320 x 240 mm Electrical data: 380 V; 2 x 1.1 kW

Process tank 450 l · vertical tank · pressure tank up to 2 bar · main tank made of stainless steel AISI 316Ti · tank insulated with mineral wool with a thickness of 50 mm in the cylindrical part and on the bottom end outer jacket made of stainless steel AISI 316Ti, thickness 2mm · bottom and top bottom pressed DIN 28011 · heating jacket for glycol · circulation pump · heating medium temperature sensor · expansion vessel of the heating system electric heaters - 5 pcs. 4.5kW/400V · control box: controlled by the heating system and the operation of the stirrer · heating medium supply connector DN33.7 · connector for receiving the heating medium DN33.7 Equipment: · manhole DN300 (2 bar) with a safety sensor drain connection (heated) filling connector (heated) · filling level sensor connector · PT-100 temperature level connector · safety valve · Redox + e ...

The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...

– Italian production – year of manufacture 2009 – full optimization –DTR –CE TECHNICAL PARAMETERS: cutting width max. 260 mm cutting height max. 120 mm engine power 7,5 kW material length max. 4000 mm receiving table 3000 mm disc diameter 500 mm feed speed 60 m/min possibility to program 100 dimensions of cuts programming of 5 classes of wood automatic and semi-automatic operating mode total dimension (L/W/H) 930 / 150 / 170 cm

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

– after technical inspection – German production – year of manufacture 2005 TECHNICAL PARAMETERS: .max. length of cut material 4500 mm .max. width 360 mm .max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW disc motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors overall length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (L/W/H) 600 / 240 / 190 cm weight ~ 1800 kg

– after technical inspection – year of manufacture 2004 – declaration of conformity, DTR – German production TECHNICAL PARAMETERS: min./max. element input length 800 / 3500 mm .max. input width of the element 200 mm min./max. element input thickness 12 / 80 mm type of hard/soft wood cutting to the line wood classification .max. feed speed 120 m/min acceleration 5 m/s saw diameter fi 500 mm saw bore diameter 30 mm number of spindle revolutions of the saw 4600 U/min duration of 1 cycle 0.7 - 1.2 sec driven transporter at the entrance and marking station with side tables for two marking belt conveyor total power 15 kW length measurement – fluorescent camera for 3 quality receiving station – conveyor belt total length 8300 mm connection diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz