ras 73 used for sale

pressure:150 t throat:450 mm stroke:115 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:2250 x 1090 mm table height over floor:900 mm passage to the back:1900 mm ram surface:1900 x 900 mm ram adjustment:100 mm power requirement:16,0 kW weight:19,5 t Dimensions (WxDxH):3,0 x 2,3 x 3,9 m

Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally

Junction box for 10-30kV power cable. Explosion and water proof. Make: Gothe & Co Model: 73110-22-150-28-04 Year: 2009 - NEW, never used. Capacity: 10kV 340Ampere 150mm2 IP67 Comes complete, unused, with all couplings etc. Including testing sheet. New factory price approx. Euro 2250,- each. Ask us for competitive price! Description casing and cover of steel sheet 3mm, the casing is provided with 3 ceramic terminal sockets to connect cables and conductors up to 150mm², internal and external earthings, sidebox is provided for connecting supervising and control conductors up to 6mm², option optical fibres

Type: Engine, Type number: 12V71 7123-7305 GENERATOR 438KVA

Manufacturer: Pall Model: Sfg Type: SFG7314GF100 Number of candles: 31 x 30" or 40" (code 07) Enclosure contents: 291 ltr. Material: Stainless steel 316L / 1.4404 Pressure: 0 - 10 bar Temperature: 0 - 140° C Built: Ultimate purpose: 1989 Brewery / Beer Candles hanging, approx. space requirement BXTXH, 600 x 600 x 1,870 mm

On-seat scrubbing machine, Ground sweeper Brand: Tennant Type: 7300 Hours of operation read: 1951 h Electric motor Battery: 36V Charger Operating instructions Ready to drive.

Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS program ...

Hapa H-730-R/16 digital printing machine for foils and papers from reel, solvent-free UV ink technology, print presence check, UV dryer 1 + 2 (160 mm print width / 2700 W), rewinder for a maximum film width of 300 mm and a maximum roll diameter of 500 mm (printed substrate can be wound onto reels for later use (e.g. in a blister machine)), dancer cover, print width max. 160 mm, print length max. 240 mm, output 19.2 m/min., print cycles max. 80 cycles/min., resolution 600 DPI, suitable for aluminium foil (0.06 mm thickness) and paper (40 g/m2), web width 60-290 mm, max. roll diameter 500 mm, roll core diameter 76 mm, mobile machine design on wheels, electrical connection 400V/50Hz, machine dimensions incl. rewinder 1630 x 1030 x 1500 mm (LxWxH)

Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...

Mecalux transfer roller conveyor slider 90° 1050-815-730 RA1914 Make: Mecalux Running direction: both directions Roller width (RB): 730 mm Nominal/outer width frame (NB): 745 mm Total width: 815 mm Length: 1050 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 1x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 745 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) angle: 90° nominal voltage: 24V, 400 Conveying length in mm: 1050 Nominal / outside width in mm: 745, 815 Roll width in mm: 730 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24V Conveyor speed m / s:  ...

; Gross weight [kg]: 311

General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional

Ref. -No.: 10372 Manufacturer: STAMA Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

workbench, work table, assembly bench -with: bench vise -Width: 1500 mm -Depth: 730 mm -Height without vise: 920 mm -Clamping jaws: 115 x 20 mm -Wingspan: 160 mm -Worktop thickness: 40 mm -Drawer: 1 -Weight: 85 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 195 mm -Transport roller width: 735 mm -Hole: Ø 30 x 95 mm, Ø 30 x 68 mm -Dimensions: Ø 195 x 865 mm -Weight: 24 kg

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame: 738 x 535 mm -Price: per piece -Number: 5 pieces -Dimensions: 738/535/H10 mm -Weight: 1.6 kg

Lippert rising falling Incline belt conveyor GF 640+7300+850-750-600 RA2264 Technical data: Conveyor length (NL): 8790 mm ( 850 mm forerun + 7300 mm ascending belt + 640 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 8790 ( 850 + 7300 + 640 ) Nominal / outside width in mm: 750 Belt width  ...

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Transport box, wooden box, assembly box -Dimensions inside: 590/1490/H500 mm -External dimensions: 730/1620/H680 mm -Weight: 74 kg

Clamping angle for workpiece clamping, eccentric press -The clamping angle comes from: an eccentric press -Manufacturer Heilbonn Type: REPV60 -Clamping surface: 600 x 720 mm -Plate thickness: 75 mm -Groove: mm -Surface: milled -Dimensions: 735/900/H545 mm -Weight: 532 kg

For sale is a Stamford HCI 734 FCG generator with the serial number A03C027807. This generator was coupled to a Jenbacher 320 engine with the design number B212. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 2003. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg

Stainless steel VA chimney cover, chimney hood -Hole spacing: 135 x 385 mm -Price: per piece -Number: 2x available -Dimensions: 655/730/H170 mm -Weight: 4.7 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from the company GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 5x motors available -Price: per piece -Dimensions: 240/175 mm -Weight: 14 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Workbench, work table, assembly bench -Workbench: with drawers, solid design -Width: 1595mm -Depth: 730mm -Height: 925mm -Drawers/cupboard doors: lockable / without lock/key, see photos -Weight: 132 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor -Gearbox: Type 73F VL-160 L/4 i= 37.63 -Speed: 39 rpm -Engine: Type SK 160L/4 -Power: 15 kW / 1460 rpm -Shaft: Ø 75 x 140 mm -Dimensions: 1060/400/H540 mm -Weight: 279 kg

crane fork, loading fork, load fork, pallet fork, pallet crane fork -Crane fork: with manual balancing -Load capacity: kg -Tine length: 730 mm -manual weight compensation -Fork: adjustable up to 1040 mm -Useful height: adjustable 1170 to 1960 mm -Dimensions: 1060/865/H1130 mm -Own weight: 108 kg

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 734-107/037-047/ 7-pin -Quantity: 7x box available -Price: per box -Dimensions box: 200/145/H40 mm -Weight: 0.4 kg/carton

gear motor, electric motor, three-phase motor -Manufacturer: Weg, gear motor type ODGM 734 -Speed: 94 rpm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Dimensions: 180/160/H390 mm -Weight: 12.8 kg

workbench, work table, assembly bench, assembly table, work table -Workbench: steel frame -Width: 730 mm -Depth: 660 mm -Height: 785 mm -Worktop: screen-printed board -Weight: 43 kg

Gear motor, electric motor, three-phase motor, feed motor -Manufacturer: Weg, gear motor with attachments -Engine: Type ODG 732 T/372 -Power: 0.55 kW -Gearbox: Type ZB 4824 i= 645 -Drive wheel speed: 30 rpm -Dimensions total: 360/250/H350 mm -Weight: 31.1 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Parker, hydraulic pump -Type: 730-0080 000-064 -Drive shaft: Ø 22 x 35 mm - universally applicable -Hole: Ø 13 mm / Spacing 106 mm -Dimensions: 233/133/H135 mm -Weight: 13.1 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 238 kg

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Working Hours: 1110 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 227 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-6v71t-7064- 7312-used/22432, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 6V71T 7064-7312; Transport weight [kg]: 1250

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/803, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 206 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -12 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 210 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive -Condition: unused, from warehouse clearance -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar -Number: 3 drives available Price: per piece -Weight: 7 kg/piece

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/801, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8va-7083-73 95-used/25, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8VA 7083-7395; Transport weight [kg]: 1250

Empty bottle inspector dismantled and stored now Manufacturer: Krones Type: Linatronic 735 M2 Year of construction: 2007 Output: 39.600 bottles per hour Additional info: Glideliner, accutable and partly conveyor belts are also The Krones Linatronic 735 M2 is a high-speed label inspection machine designed for use in the food and beverage industry. It was released in 2007 and is capable of inspecting up to 72,000 containers per hour. Here are the specifications for the machine: - Dimensions: 4.4 meters long, 1.7 meters wide, and 2.7 meters high - Weight: approximately 4,500 kg - Power supply: 400V AC, 50/60 Hz, 16A - Maximum container diameter: 120 mm - Label height range: 10-200 mm - Label length range: 15-300 mm - Inspection accuracy: up to 99.9% - Maximum speed: 72,000 containers per hour - Operating temperature range: 5-45°C - Air pressure: 6 bar The Linatronic 735  ...

Screwed plate heat exchanger 300 KW, 60 sqm heat exchanger area

Bottle inspector Krones / Germany Type Linatromic 735 Full Inspector With automatic rejection Year of construction: 2011 FILM AVAILABLE - PLEASE REQUEST

Key data: 201 KW, 235 kVA, 400 V

Net price: 16.500,- € Gross price: €19,635.- - - - - - Volvo generator set 235 kVA Year of construction 2013 - only 50 hours - - - - - Engine: - Volvo Penta (Made in Germany) - Model: TAD 733 GE - 6 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - Power: 270 hp - - - - - Generator - Manufacturer: MeccAlte - 225 / 237 kVA - 230 / 400 volts - 50 Hertz - - - - - Control / Control cabinet - Incl. power section and switching - With Kuhse control - Automatic start function - Hand start at the touch of a button - Generator monitoring: volts, amps and hertz display - Engine monitoring: engine temperature, oil pressure, battery voltage - - - - - Condition: - The generator is a pure emergency system - It was used for emergency power backup in a factory and has only run for 50 hours of operation - Regular maintenance and test runs were c ...

A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats  ...

Marchesini RIBATINO RIB. 730 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 120 kg