129,254 used machines on RESALE, but how to find them? Machine Search
sheet width: 3200 mm plate thickness: 3.0 mm ST thickness at Niro-steel: 2.0 mm Opening width / upper beam: 300 mm speed: OW 40.0 mm/sec Bending beam adjustment: 80.0 mm speed: BW 90.0 Grad/sec work height max.: 900 mm control: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mm accuracy +/-: 0.1 mm air pressure: 5.0 bar Number of working hours: ca. 1.000 h total power requirement: 2x 4.0 kW voltage: 400 V weight: 4400 kg range L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine RAS 73.30 hi ...
Raskin raskin Capacity: 50 ton Table area: 420 x 360mm
FIMIC RAS 325 BACKFLUSH, fully automatic screenchanger, for back-flush only, so for contamination under 5%, no costs for doctor blades, no cost for laser filter., works with standard mesh, capacity rekated to screening mesh - with a 250 µ mesh, up to 700 kg/h, connected for test, offered totally reconditioned, with new control panel, availability: 4 -5 weeks time, capacity: Max 500-600 kg/h, conditions: totally reconditioned, type: fully automatic - backflush
FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used power ...
FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2017, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, availability: immediate, type: fully automatic
FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic
Used ACMI RASAR P135 palletizer - 14400 BPHTechnical Specifications & Performance DataThe Acmi Rasar P 135 is a second hand palletizer engineered for high-efficiency industrial packaging and beverage production environments. Designed to handle packs and cases across multiple container materials, it brings robust performance to any used bottling line or packaging machinery setup. Manufactured by Acmi, this conventional automatic palletizer supports standardized pallet formats and delivers reliable throughput for sustained operations.Manufacturer: AcmiModel: Rasar P 135Year of manufacture: 2001Maximum speed: up to 14,400 Bottles per hours ( on 3x2 pattern) Nominal output: up to 2,500 pph on 800x1200 mm pallet formatCurrent pack format: 6x4 of 0.3L containersContainer materials handled: PET, Glass, Aluminum cansProducts to palletize: bundles/casesSupported pallets: EPAL 800x1200 mmMachine d ...
roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately
Slitter rewinder, reconditioned, working width, 110 cm, winding diameter: 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifing in and out mechanism, Web guide unit, tension control unit with adjustable brake, overall perforation, Siemens S5 Still in operation: Yes Available: sofort
Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD
Cake cutting table for trays 400x600mm universal tray lock ruler cake cutting templates Pneumatic knife PM10 works on compressed air 2 types of blades
Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold
Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rasch Type: RR foiling machines for chocolate eggs with infeed System Year of manufacturing: 1987 pieces: 2 pieces output capacity: up to 150 pieces/min. Format on machine: Double twist Ei/Egg 43x27mm / Kugel/Bowl 30 mm. We offer this machine in 'as is' condition, without warranty excluded Vat, ex Work Germany, unpacked
Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz
chiller, chiller Emicon RAS 801 S KP YOC 2018 80 Kw cooling capacity 22.8 Kw. Electrical Power, Amp. 62 Refrigerant R290 Weight 1.106 kg.
Key data: 3100 mm, 3 mm
- CNC control and electric 3x 400V, 50/60 Hz - CNC backgauge 5 – 750 mm - Machine frame with knife bar - Hold-down device with plastic coating - Sheet metal hold-up system - Cutting sorting system to the front and rear - Foot lever for adjusting the cutting material diverter - Built-in special knives (suitable for stainless steel) - Cutting gap quick adjustment - Cut line lighting with LED - Standard table trays - Front clippings collector - Safety device - (Protective fence right and left, light barrier) Working length: 3100 mm Sheet thickness steel: 3.00 mm Color: white / grey / yellow Dimensions: 3920 x 2370 mm with hold-down device Throat: 5-750 mm Speed: 26 strokes/min with angle stop Cutting angle of/up to :1000 mm Cutting angle: 1.1 degrees Min. back gauge: 5 mm Max. back gauge: 750 mm
chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.
Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg
Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg
Offer 23317 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Minimum inboard height 6 x sheet thickness - Automatic sequential control for a complete workflow - Operation via hand or foot switch - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg
Matteuzzi RAS 90 Buffing Machine Computer controlled Buffing machine for retreading DIMS: 12ft long x 7ft wide x 8ft high Weight: 2500kgs
Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools
Brush deburring machine, sheet metal deburring machine, deburring machine -Deburring machine for: stamped, laser and nibbling parts -Deburring system for: sheet metal edges with notches -Drive power: 0.71 kW -Speed: 4500 rpm -Dimensions: 400/180/H130 mm -Weight: 3.5 kg
Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg
Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg
sheet width: 3200 mm plate thickness: 2,5 mm weight of the machine ca.: 3,5 t Tools recentely grounded. Bending angle preselection via potentiometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight: 145 kg engine output: 1,27/1,7 kW : 83 dB speed: 15/30 m/s : 150x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24154 Specifications: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 100 kg
Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
sheet width: 2500 mm plate thickness: 4 mm cutting angle: 1,49 ° : 40-80 column arm: 200 mm Number of hold downs: 13 Stück back stop - adjustable: 5-1000 mm table height: 750 mm oil volume: 85 l air pressure - required: 5 bar weight of the machine ca.: 3600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg
sheet width: 2000 mm plate thickness: 2,25 mm distance between columns: 2040 mm total power requirement: 7,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,2x1,7x1,1 m SN-No. 380/6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
pressure: 40 t stroke: 250 mm total power requirement: 6 kW weight of the machine ca.: 3 t distance between columns: 600/350mm mm table surface area: 860x620 mm ram surface: 860x620 mm table height: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons
Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton
CONTROLS conventional PRESS FORCES total force (nominal): 75 to PRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 1110 mm SLIDE table surface (left-right): 960 mm table surface (front-back): 750 mm SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 120 /min stroke rate (max.): 600 /min STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS total power consumption: 15.5 kW DIMENSIONS / WEIGHTS total weight approx.: 13500 kg ATTACHMENTS (PRESSES) strip feeder: yes feeder type: roll feeder
Key data: 2500 mm, 2 mm
with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3
Rok produkcji: 2007 Waga: 20,000 kg Maksymalna długość robocza: 2560 mm Maksymalna grubość blachy (stal miękka): 2.0 mm Maksymalna grubość blachy (stal nierdzewna): 1.5 mm Maksymalna grubość blachy (aluminium): 3.0 mm Dodatkowe wyposażenie: podajnik wykrojów, narzędzia
maximum number of results exceeded
please refine your search
