punching used for sale

Maximum punching format: 500 x 750 mm Maximum pressure: 200 tons Thickness of corrugated board: 80 g / m ² Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 10,000 sheets / hour Maximum punching and stripping speed: 9,000 sheets / hour Heating zone: 10 Heating temperature: 0-199 ° C Machine weight: 13,000 kg Dimensions: Length width 155 cm height 361 x 240 x Power: 15 kW

Used electric punching and binding system for plastic binding. For the fast and practical creation of brochures and documents in small to large runs. Binds up to 480 sheets Diameter adjustment guarantees easy opening and closing of the binding element, for perfect presentations Rotary knob to adjust the edge spacing Specially hardened punches for sustainable use Offset punching punches for a better punching result Highest format flexibility thanks to QSA technology, e.B. between DIN A4 and A5 Adjustable side stop for ideal punch adjustment Easy-to-empty waste drawer Built-in dimension scale for document or binding element size Robust construction and compact design

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Sheet Metal- & Profile Steel Shear Mubea KBL 11 with notcher and punching press manufacturer: Mubea type: KBL 11 mach.-Nr.: 107/3019/7 year of construction: ? comm.-Nr.: 0250/125/200/0575 stock-Nr.: 1911 + Regular Price: 2.750,- € > Reduced Price: 1.375,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Flat Steel Shear blade length: 220 mm sheet metal up to: 11 mm flat steel up to: 125 x 13 mm Profile Steel Shear angle irons up to: 80 x 9 mm T-iron up to: 80 x 9 mm U- and I-iron up to: NP 10 hubs: ca. 55 / min. Steel Bar Shear steel bars up to: 35 mm square steel up to: 32 mm Notcher  ...

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic hole punch PEDDINGHAUS Type Hydraulic 1000 Masch. No. 42068 752 83 004 Year of construction 1983 Punching force 100 ton. Hole diameter 30 in 20 mm Sheet metal 40 in 15 mm Sheet metal projection 510 mm Motor power 8.8 kW Rated power 380 volts, 50 Hz Hydraulic oil Tank capacity 80 litres - Coordinate stop table 1000 x 720 mm (self-made) - Punching saddle for dies max. 140 mm- Adapter for cutting insert 140 mm to 63 mm- Punch holder with union nut Stop in the projection up to 450 mm Side stop left 550 mm Side stop right 1300 mm - stroke infinitely adjustable - built-in punching tool approx. 34 mm space requirement of the machine L x W x H 1770 x 2000 x 2380 mm Machine width without stop rail right 1200 mm weight approx. 3500 kg good condition; used

round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GEKA BENDICROP 60 SD ironworker machine was manufactured in 2016 in Spain. Equipped with 5 work stations, the ironworker machine performs precise hole punching, corner cutting, flat bar cutting, as well as bar cutting and bending. The vertical movement of the shears is performed by two adjustable hydraulic cylinders with a central positioned actuator, which guarantees excellent cutting quality throughout the entire life of the machine. The GEKA ironworker machine weights 1750 kg. Technical specifications of the GEKA BENDICROP 60 SD hydraulic ironworker machine General data - maximum press force: 60 t - number of cylinder strokes: 32/min - dimensions (L x W x H): 2010 x 1400 x 2006 mm - weight of machine BENDICROP 60 SD: 1750 kg Hole punching station - maximum bore size (diameter x thickness): ø 40 x 11 mm - throat depth: 500 mm - additional table for hole punching fi 100 ...

NILPETER MO 3300 SERVO NUMBER M-1103 Format 335mm x max. 25" Length Type: Multifunction Offset Year 2004 Basic Machine Structure: 8 Colours, thereof 6x Offset (DW2-DW7) 1 Punching Unit, Register Control 1) Unwinding: with Roll Lifter & edge Control 2) Move-in Station: with Corona System Vetaphone 2kW & Teknec Web cleaning 3) M-Station: (First Platform) Delam-Relam & Turning Cross 4-7) MO Stations: GMI Mircocolor 1 Colour control System & Siphon control & Ink Agitator 8) M-Station 9) Punching Unit: with Pull Station & 1 Punching Unit 15"-25" L+B Gapmaster 10) Rewind Unit: with Grid Rewinder & Label Converter & BST Camera 11) Gew UV System: VCP with cooling Drums DW 1+2 reinforced Lamp System for Screen printing 12) Cooling Unicold TAE 081 13) Baldwin Water Treatment (NEW 2019) 14) Main Control Panel 15) GMI Control Panel Offset inserts: 4 x 6 pieces – 20", 22", 2 ...

Scaffolding production line built in 2015 is designed for the efficient production of steel boards used in construction scaffolding. The sheet metal unrolled from the coil goes through a straightening machine and is then subjected to the relevant machining stages. At the beginning of the machining process, the appropriate side holes are punched and the sheet is perforated to ensure adequate slip resistance. In a further stage, the sheet goes through a rollforming line, which gives the final shape of the board. The installed software of the machine allows to choose from 8 different steel scaffolding board lengths ranging from 0.73 m to 3.07 m. A complete steel scaffolding boards production line with tooling performs the entire process fully automatically. The automated production line for construction scaffolding boards consists of the following components: – software – B&R PP41  ...

pressure: 11 t punching cross-cut in cmm: diverse stroke: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic punching press With 3 punching tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

Salvagnini S4+P4-2420 Plate Bending and Punching Machine Specifications: Maximum length x width of incoming sheet: 2420 mm Minimum length x width of incoming sheet: 436 x 130 mm Maximum diagonal of incoming sheet: 2220 mm Maximum bending height: 203 mm Maximum material thickness: 2.0 mm Minimum material thickness: 0.5 mm Charging: automatic/manual Load capacity 5000 kg The Salvagnini S4 + P4 system are flexible lines for the production of panels from sheet metal packages. The punching, shearing and bending process is integrated to eliminate material handling. The S4+P4 system can also be operated as separate work cells. The intrinsic flexibility of the individual S4 and P4 systems extends to the hole line. Efficient production: The production process from raw material to finished panel takes place on a single processing line. This offers concrete savings in terms of pro ...

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price

sheet width: 500 mm plate length: 1000 mm plate thickness: max. 6,0 mm pressure: 28,0 t throat: 500 mm height of stroke: 0 - 40 mm working area: X = 1200 mm working area: Y = 570 mm no. of strokes: max. 180 Hub/min punch diameter: max. 105 mm work height max.: 900 mm oil volume: 50 l total power requirement: 4,0 kW weight of the machine ca.: 2500 kg range L-W-H: 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y p ...

• Designed for sealing cans with a round plastic film punched from the roll • With double punching station and double sealing station • Running direction from left to right • Station adjustment in running direction of the cans • Prepared to accept a conveyor belt (not included in the scope of delivery) to accommodate cans/bottles in transport buckets provided (not included in the scope of delivery) • Rationator transport buckets, type RATILIGHT Puck 1 for object sizes 50-1000 ml were used (see pdf). • Output max. 50-60 objects/min • Max. Object height 400 mm • Punching with punching knives • Existing die-cutting and sealing formats for film diam. 83.1 mm • Foil grid rewinding • PLC Siemens S7-300, Siemens Touch monitor • Drive 400V/50Hz

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 415 mm -Table recess: 195 x 340 mm - Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 400 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Dimensions: 1620/1715/H2250mm, 420/1000/H1110mm, 700/630/H1050mm -Weight: 2860kg, 143kg, 104kg

Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic hand punch -Type: 040 0210 -Stamp: Ø 2.5 mm -Projection: 15 mm -Dimensions: 190/200/H510 mm -Weight: 24 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Notching tool, shearing tool, cutting tool, separating tool, punching tool, punch, punching die, punching punch -Notching tool: pneumatic -Notch: 18 x 9 mm -Dimensions: 180/200/H270 mm -Weight: 4.8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 65/80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124603 144876 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

: neu : ca. 8 Wochen ab Auftragse : Spanien : 9300 € : 192.51 € : 36 to : 170 mm : 3 : 27x10 mm : 15 mm : 24 1/min : 350x6 mm : 80x8 mm : 2,2 kW : 1100 mm : 800 mm : 1400 mm : 485 kg 3 working stations foot pedal hydraulically driven oil filled table at punching station with gauge user manual in GERMAN and ENGLISH FLAT STEEL SHEAR flat steel mm 200 x 13 with small deform. mm 350 x 6 blade lenght mm 356 round bars mm 30 square bars mm 25 working hight mm 980 &,nbs ANGLE IRON SHEAR L profiles 90° mm 80 x 80 x 8 L profiles 45° mm 50 x 50 x 6 round bars (optional) mm 35 square bars (optional) mm 30 &,nbs NOTCHING STATION (optional) sheet mm 8 L profiles mm 60 notching depths mm 53 PUNCHING STATION max. punching cap. to 36 max. sheet diam. mm 27 x 10 gap mm 170 stroke mm 28 working height mm 980 The data for this ad was created with ModulMWS - the software s ...

Wire-O punching machine & closing Make JBI Model PB3000 Year 1995 Workingwidth 330 mm Punching thcikness up to 2.5 mm, depening on material quality, 15-20 sheets on average Tools 2 x 3:1 with round holes for books, 1 x 3:1 with round holes for calenders, 1 x 2:1 with round holes for books Details electric punching, manual closing, tunring on/off pins very easy Available Direct

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm from a maintenance workshop New price ~ 13.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication Machine link: http://mhp.logotech.de/hpm/ ...

punching pressure: 80.0 t punch diameter: 28 x 20.0 mm punch diameter: 57 in 9.0 mm throat: 320 mm round bar steel: 45.0 mm square edge steel: 45.0 L-beam: 150 x 13.0 mm shear: flat material: 300 x 20.0 mm adjustment of stroke: 0 - 55 mm work height max.: 1130 / 890 mm strokes per minute: 34.0 punch diameter: max. 160 mm voltage: 400 V total power requirement: 7.5 kW weight: 2095 kg dimensions: 1760 x 710 x 1830 mm New price ~ 24.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shears with a large radius - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - KINGSLAND electrical contact length stop - Protective devices at workstations - 2x freely movable foot switches - User manual (PDF) Machine link: http:/ ...

Perforated punch, hand lever hole punch ZAECKEL & ACHENBACH punching tool: Ø 6mm punching stroke: 10 mm projection: 100 mm distance table punching tool: 6 mm table surface: 65 x 65 mm used, tested ! Dimensions: 300 x 90 x 320 mm

Combined profiled steel shears and hole punch GEKA type HYD 80 / Hydracrop 80/A Masch. No. 9566 Year of manufacture approx. 2000 Punching force 80 ton. Projection 300 mm Punching up to 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm 4-point shears 45 x 45 mm Round material shears 45 mm Rectangular notchers up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz stop with el. Lifting release 500 mm - Work table with stop for the hole device 550 x 380 mm - Working height of the hole device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - Approx. 21 pieces of various punching tools - Operating instructions - Original painting, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 ton. very good condition; used

Description: PUNCHING Punching force: 60 ton Punching capacity: Ø22 x 20 mm (Diameter x Thickness): Ø40 x 11 mm Throat depth: 200 mm Maximum stroke length: 40 mm Cycles / Min. (15 mm stroke): 34 mm Working height up to mould: 1050 mm  , ANGULAR CUTTING Cutting force: 60 ton With 90° cut: 100 x 100 x 8 mm Working height: 1070 mm  , FLAT SHEAR Flat bar shear: 350 x 15 mm Blade length: 360 mm Working height: 805 mm  , BAR SHEAR Shear for round bars: ø40 mm Shear for square bars: 38 x 38 mm Cutting channels: 102 mm optional tool I-beam cutting: 102 mm optional tool NOTCHING Rectangular notching (W x D x T): 50.8 x 90 x 8 mm V-cut (L x W x T): 90 x 90 x 8 mm optional tool Working height: 1050 mm  , SPECIAL TOOLS optional  , Single Vee press brake (W x T): 160 x 8 mm tool optional Multi Vee press brake (W x T): 250 x 6 mm tool optional ...

R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately

4-color R23240/17 SHIKI label printing machine model: PC 45 M age: 1992 web width: 280 mm printing width: 270 mm available: immediately 3 – colour or 4 - colour max. feeding: 7, approx. 180 mm equipment: unwinding unit for reels up to 100 cm diameter rewinding unit for low reels pneumatic line hole punching double-sided speed: 7000 cycles/h max. products: file hole margin self-adhesive labels, file hole margin board labels, tickets with and without printing possible: punching, printing, embossing, numbering, perforating Available: sofort

Fully automatic unwinding reel Remote control console Automatic and manual working mode Fine adjustment of speed Potentiometer Simply synchronized with punching machine Reel motorized, with Central Expansion Reel run both directions, prewaerts and rueckwaerts with loop sensors control Speed from 0.1 to 30 RPM rpm Engine with gearbox Reel max load 1 ton Winder strip width up to 300 mm Inner diameter 250 mm min max. 500 mm Outer diameter max. 1300 mm Power 0.37 KW Dimensions 1,200 mm x 1,200 mm height 1,600 mm with CE certificate in stock 2 essa, 2 shaal and 12 brother general overholt punching machines

Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price

Sheet thickness: 7,00 mm Bar diameter: 0 mm Punching size: 2000 mm (1) hydraulic / (2) mechanical: 1   MACH-id     5410 MAKE        EUROMAC Italia TYPE          ZX INDEX YOP           2007 SPECIFICATIONS Table load       80 Kg Working area X Axis       1250 mm Working area Y Axis        1000 mm Working area X Axis with override          2000 mm Punching force      30 T Maximum sheet thickness       7 mm Turret position    360 Gr index Auto indexing positions      1 Positioning speed X and Y Axis         10.000 mm/min. Control      EUROMAC TOPPUNCH DIMENSIONS Length      ...

Machine type: 5-fold combined Section Shear with Hole Punching, Manufacturer: PEDDINGHAUS,. Model: Peddy,. Built: 1970,. Condition: very good. Offer type: used machine,. ,. Technical data:,. Performance in mm:,. Sheet metal: 10 mm,. Round: 28 mm,. Hole: 15 in 10 mm,. Drive type: el./mech.,. Drive: 1.5 kW,. Comment:. Punching hole,. Notcher,. Material stop,. Bogie. Weight: 500 kg,. ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location,. ,. We will be pleased if you take an interest in our offer.,.

Hydr. Flat, - Profile and bar steel shears with cut-out device and punch punch Offer number: 15229 Make: MUHR + BENDER Type: KBLH 700 Machine no: 01562869552445 Built: 1986 Technical data: - two separate working cylinders, - it can be used at two workstations - work at the same time - Flat steel shears - knife length 520 mm - for flat material 500 x 18 mm - Profile steel shears - L- steel at 90° 130 x 12 mm - at 45° 90 x 10 mm - T-steel at 90° 180 mm - Bar steel scissors - Round steel 65 mm - Square steel 60 mm - Cut-out device - rectangular tool for material up to 12 mm - Punching hole - Punching force approx. 700 KN - Stroke infinitely variable 0 - 75 mm - punches in steel up to 30 mm in 20 mm - Extension 510 mm - Hydraulic drive 400 V / 8.5 kW - Space requirement approx. W 1850 x H 2100 x D 750 mm - Weight ...

consists: punching machine IBICO EP-28: Watt 510/ Volts220/ AMPS 2.3/ no. 10394/ Hz50 punch binding machine IBICO EPK-21: Watt 250/ Volts 230/ AMPS 1.5/ No. 118713/ Hz50 punching machine IBICO HB-28 Perforator

Pneumatic rotary table press make -No: SCHÜCO type Pneumatic 297 838Fabr. -No: 1293, built in 1992Technical specifications:Press force: 35 kNMax. Operating pressure: 8 barLifting height approx .: 12 mmReceiving opening approx .: 134 mmpossible strokes per minute: see videoExternal dimensions approx .: 800 x 800 x 1400 mmMax. Weight: 150 kgWith- a lot of Schüco punching tools (Photos of all punching tools available)- round plate- underframeused, in very good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools