877 offers punching

Category: 842: paper converting: die cutters
New in: 1986
Price: request quote
Location: Land-de DE 50829 Köln, Hugo-Eckener-Str., 29
Seller: PP LION GMBH

Bobst SP 142-ER cutting machine Ref.Nr: 2697 Manufacturer Bobst Model SP 142-ER Year built: 1986 Speed: 6000 sh/h Max sheet size: 1420 x 1020 mm Availability: immediately Condition: good Price: on request Technical spezification: â?¢ Cutting force up to: 600 t â?¢ Running speed/hour up to: 6000 â?¢ Format max: 1420 x 1020 â?¢ Format min: 700 x 500 â?¢ General remont: 2017 â?¢ That cutting: full board, B, E, F, and N flute

Category: 109: other metal working machines
New in: 2014
Price: 70.000 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 842: paper converting: die cutters
New in: 1983
Price: request quote
Location: Land-de DE 50933 Köln, Eupener Str. 135-137
Seller: PP LION GMBH

Bobst SP 102 E, 1983 Ref.Nr: 2692 Manufacturer Bobst Model SP 102-E Year built: 1983 Speed: 7500 sh/h Max sheet size: 720 x 1020 mm Availability: immediately Condition: good Price: on request Technical spezification: â?¢ 3 cutting chases, â?¢ 4 cutting plates, â?¢ 1.5 set of stripping frames (3 frames total) could be equipped with minimum amount of stripping tools, low pressure/vacuum compressor â?¢ Working hours: 46.820 hours

Category: 202: milling machines
New in: used
Price: used machinery auction RESALE 1.900 €
Location: Land-it IT Italy, 80040 Poggiomarino ( Napoli )
Seller: Surplex GmbH

Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 2500 x 1500 x 2000 mm Description: Used punching machine

Category: 842: paper converting: die cutters
New in: 1994
Price: request quote
Location: Land-pl PL 30199 Krakow, Strugi 18
Seller: TOP GRAPHIC MACHINERY

Hand fed platen Drossert ST 115 x 167 ref 2189EU Year - 1994 Max size - 1670 x 1150 mm Refurbished in 2012

Category: 107: sheet metal working
New in: 1998
Price: used machinery auction RESALE 3.600 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 15000 kg Dimensions (l x w x h) approx.: 6500 x 6000 x 2150 mm Description: punching force 300 kN, max. operating pressure 300 bar

Category: 842: paper converting: die cutters
New in: 2011
Price: request quote
Location: Land-de DE 50933 Köln, Eupener Str. 135-137
Seller: PP LION GMBH

Young Shin giant 210 SII elevated Ref.Nr: 2690 Manufacturer young Shin Model giant 210 SII elevated Year built: 2011 Speed: 2000 sheets / hour Max sheet size: 2100 x 1500mm Availability: immediately Condition: very good Price: on request Technical spezification: â?¢ Max Sheet size: 2100 x 1500mm â?¢ Min sheet size: 1100 x 850mm â?¢ Max Cutting size: 2100 x 1490mm â?¢ Cutting pressure: 500 tons â?¢ Sheet thickness: corrugated board 1.5mm ~ 11mm / 0.05 "~ 0.43" â?¢ Max speed: 2000s / h

Category: 106: presses
New in: used
Price: used machinery auction RESALE 160 €
Location: Land-fr FR France, region Calvados
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 1900 x 1100 x 280 mm Description: Pneumatic punching presses, Approx 7 pieces

Category: 106: presses
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Silicon plus

Press: Stroke power capacity 40 Ton Brand: Dimeco, Besancon, Made in France Type: inotecno 40 ac2b Year: 2001 Serial number: 062 max. plate size L: 1500 mm max. plate size W: 1050 mm Punching speed max. 200 spm foot control: yes digital display: yes machine weight: 7500 kg Complete stamping line from running production in Philips CE Certificate Coiler: brand: Dimeco electric connection: 400 V description: max. roll width 200 mm; adjustable in height Straightener: brand: Dimeco type: 1645/AVV year: 2002 serial number: 1593 working width: 150 mm electric connection: 400 V machine weight: 220 kg description: in operation

Category: 106: presses
New in: used
Price: used machinery auction RESALE 150 €
Location: Land-fr FR France, region Calvados
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 2000 x 800 x 360 mm Description: Pneumatic punch presses, Approx 6 pieces, Foot controller, ROYAL sliding tools

Category: 842: paper converting: die cutters
New in: 1964
Price: request quote
Location: Land-pl PL 30199 Krakow, Strugi 18
Seller: TOP GRAPHIC MACHINERY

Automatic die cutter Bobst SPO 1575EE ref 2187EU Year - 1964 Max size - 1575 x 1070 mm Min size - 600 x 400 mm

Category: 107: sheet metal working
New in: 1998
Price: used machinery auction RESALE 3.600 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 12000 kg Dimensions (l x w x h) approx.: 6500 x 6000 x 2150 mm Description: punching force 300 kN, max. operating pressure 300 bar

Category: 304: thermoforming machines
New in: 1998
Price: request quote
Location: Land-uk UK 0 Gloucester, Walnut Tree Farm
Seller: Prola Ltd

Make Gabler Model M91 Year 1998 Delivery Date September 2019 Max Forming Area 700 x 345 mm Max Depth of Draw 150 mm Max Material Width 750 mm Punching Force 350 kN Equipment - Gabler M91 Thermoformer - 74mm 250cc 32 Cavity Bosch Sprang Cup mould - Conveyor belts - Rim roller - Counter - BVM Packer - Labeler - Packing table All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Category: 107: sheet metal working
New in: 2011
Price: used machinery auction RESALE 58.000 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 24000 kg Dimensions (l x w x h) approx.: 5422 x 5120 x 2317 mm Description: punching force 300 kN, 45 tool stations, serial number 182, overrun traverse 360 mm, control FANUC SERIES 180 I-PB, table load 50 to 150 kg, max. sheet thickness 4.5 mm

Category: 107: sheet metal working
New in: 2006
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

CNC control: BOSCH PNC-P Operating hours: 47000 h Maximum force: 180 kN Maximum thickness: 6.4 mm Table length (X): 3070 mm Table width (Y): 1660 mm Maximum table load: 230 kg Maximum tool diameter: 76.2 mm Number of tools in the magazine: 22 pcs Tool change time: 3.1 s Machine height: 2230 mm Machine length: 6500 mm Machine width: 5800 mm Machine weight: 14.8 t

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 4.600 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 16000 kg Dimensions (l x w x h) approx.: 6800 x 4100 x 2500 mm Description: serial number 35840434, compressive force 30 t, 58 tool stations, power consumption 28 kVA, control FANUC 18 -P, attention: auto index card is defective, no heat exchanger available!

Category: 107: sheet metal working
New in: 2006
Price: request quote
Location: Land-pl PL 42200 Czêstochowa, Meliorantów 67 A,B
Seller: INTER-PLAST Andrzej Bodziachowski

CNC bending machine AMADA EMK 3510NT, loading - unloading system Year of build: 2006 country of origin: France feed X/Y: 2 500 / 1 270 mm die-cutting area: 5 000 x 1 270 mm pressure: 30 ton tool Magazine: 58 St. (4 °) weight: 22 500 kg control: CNC AMNC F (FANUC 180i-PB) charging system: Amasort PR III built: 2008 unloading system: MP300M Year of construction: 2006

Category: 107: sheet metal working
New in: 2000
Price: used machinery auction RESALE 9.600 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 17000 kg Dimensions (l x w x h) approx.: 5300 x 5200 x 2400 mm Description: compressive force 20 t, 31 tool stations, control FANUC SERIES 18-P

Category: 107: sheet metal working
New in: 1980
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

There are four punching and bending machines available, 2x BIHLER RM 35 and 2x BIHLER RM 30, including various bending slides.

Category: 107: sheet metal working
New in: 2000
Price: used machinery auction RESALE 5.200 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 16000 kg Dimensions (l x w x h) approx.: 6800 x 5000 x 2800 mm Description: serial number 35840435, compressive force 30 t, 58 tool stations, control FANUC 18 -P

Category: 101: boring mills and machining centers
New in: 1995
Price: 1.650 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Hydropneumatic functioning Cutting force at 10 bar: 90 kN Working stroke: 40 mm Height: 250 mm Operation via foot-switch

Category: 107: sheet metal working
New in: 2011
Price: used machinery auction RESALE 58.000 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 21000 kg Dimensions (l x w x h) approx.: 5500 x 5150 x 2470 mm Description: punching force 300 kN, 45 tool stations, max. table load 160 kg, servo-electrical double drive, brush table, serial number 192, overrun traverse 360 mm, connected load 27 kVA, control FANUC SERIES 180 I-PB

Category: 107: sheet metal working
New in: used
Price: 8.200 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Maximum punching force: 400 kN Max shear force: 600 kN Inclusive range of punches and matrices More technical questions see nameplate or on request

Category: 107: sheet metal working
New in: 1986
Price: used machinery auction RESALE 1.800 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 3900 kg Dimensions (l x w x h) approx.: 2800 x 1733 x 1770 mm Description: punching force 200 kN, eccentric punch drive, 10 tool stations, table load 25 kg

Category: 107: sheet metal working
New in: 1999
Price: request quote
Location: Land-pl PL
Seller: Delivery Tools

294kN, 58 toos Fanuc 18-P

Category: 107: sheet metal working
New in: 1988
Price: used machinery auction RESALE 1.800 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 3900 kg Dimensions (l x w x h) approx.: 2800 x 1733 x 1770 mm Description: punching force 200 kN, eccentric punch drive, 10 tool stations, table load 25 kg

Category: 815: presses: digital
New in: 2000
Price: request quote
Location: Land-de DE 23769 Fehmarn, Siedendörp 19
Seller: USED Machines

label processing machine Manufaturer: BM Model: 350 Graficon Year: 2000 extension 2002 Die-cut format 300 mm 300 mm Speed 15 m / min components: upwind Screen printing / varnishing unit UV drying with suction laminating station Diecutter Entgitterung longitudinal cutter rewind equipment 210 punching forms 100 sieve frames with sieves roll cores Price: on request

Category: 107: sheet metal working
New in: 1998
Price: used machinery auction RESALE 3.600 €
Location: Land-hu HU Hungary, 3571 Alsózsolca
Seller: Surplex GmbH

Weight approx.: 14000 kg Dimensions (l x w x h) approx.: 6500 x 6000 x 2150 mm Description: punching force 300 kN, max. operating pressure 300 bar, serial number 10.2-F 525 S 7298

Category: 106: presses
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Silicon plus

Bruderer BSTA 180U precision high speed punching press. Year of manufacture 2001. Made in Switzerland. Electric drive with frequency inverter. PLC controls. 18 tons nominal capacity (180 kN) 8 to 40 mm variable stroke. Speed range 100-1400 SPM max. Bolster area 480 x 374 mm. Max tool loading width 359 mm L-R. BBV 190/85 roll feed mounted on left-hand side. Max width of strip 160 mm. Max feed length variable up to 85 mm max. Feed angle 180°. End of strip monitoring electronic. Power supply 400 Volt, 50 Hz. Weight of machine approx 1850 kgs. Oil cooler. Spring feet dampers. Safety guards front and rear.

Category: 106: presses
New in: used
Price: used machinery auction RESALE 150 €
Location: Land-fr FR France, region Calvados
Seller: Surplex GmbH

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 1500 x 1100 x 370 mm Description: Lot of Pneumatic Punching Presses with various manufacturer: TEKNA, INTEXALU, SAPA, foot controller

Category: 107: sheet metal working
New in: 1975
Price: request quote
Location: Land-de DE Baden-Württemberg
Seller: S-MA GmbH

Hole punching machine (45t) SMA-REF-6435 Category: punching Manufacturer: Mubea Type: PF 45 Year of construction: 1975 Punching power: 45 t Workspace: Throat depth: 320 mm 3-30 mm holes in 12 mm steel Condition: ready for use under current Location: Baden-Württemberg Special features: footswitch Availability: immediately Terms of delivery: from site free truck loading Terms of payment: 100% prior to removal/loading

Category: 106: presses
New in: used
Price: used machinery auction RESALE 100 €
Location: Land-fr FR France, region Calvados
Seller: Surplex GmbH

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 1500 x 1100 x 370 mm Description: Punching presses, Serial number: 54 and 07, included: 9 foot controller

Category: 405: pillow packs machines
New in: 2011
Price: request quote
Location: Land-dk DK 8660 Skanderborg, Bragesvej 11
Seller: Stratek ApS

2nd-hand - fully operational Variable length and compression Packing hay and straw in 1 to 2½ kg bags With 8,0 m conveyor - Weighing hopper - Compression through forming chute (rack and pinion) - forming chute in stainless steel: W:340 cm / D: 190 cm - Length welding jaw - Cross welding Jaws with double seal and handle punching tool - Maximum foil width 1,035 mm - Pneumatic cylinders - PLC control (Siemens S7) Without printer for production date and batch number The machine can run with single - or double-push operation. (Various bag lengths)

Category: 109: other metal working machines
New in: used
Price: request quote
Location: EU
Seller: ProdEq Trading GmbH

pressure: 10 t no of strokes: Hub/min sheet width: mm --------------------------------------------------: PRESS FORCES: - total force (nominal): 10 to SLIDE (MECHAN. PRESS): - stroke min.: 16 mm - stroke max.: 36 mm - stroke rate (min.): 100 /min - stroke rate (max.): 600 /min STRIP-FEEDER: - feeder type: roll feeder: Last Overhaul: 2012 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109: other metal working machines
New in: 1990
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Line for punching, shearing and chamfering of metal parts.

Category: 109: other metal working machines
New in: 1976
Price: request quote
Location: EU
Seller: ProdEq Trading GmbH

pressure: 50 t no of strokes: Hub/min sheet width: mm --------------------------------------------------: PRESS DESIGN: - openings in uprights: yes: PRESS FORCES: - total force (nominal): 50 to PRESS TABLE: - table surface (left-right): 850 mm - table surface (front-back): 450 mm SLIDE: - table surface (left-right): 700 mm - table surface (front-back): 350 mm SLIDE (MECHAN. PRESS): - stroke adjustment: yes: - variable speed: yes: - stroke rate (max.): 800 /min TOOL ASSEMBLY DIMENSIONS: - tool length max.: 320 mm STRIP-FEEDER: - feeder type: roll feeder: DIMENSIONS / WEIGHTS: - total height: 2600 mm Last Overhaul: 2012 The data for this ad was created  ...

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-pl PL
Seller: Delivery Tools

80 tons,PLC Omnron

Category: 109: other metal working machines
New in: 1977
Price: request quote
Location: EU
Seller: ProdEq Trading GmbH

pressure: 15 t no of strokes: Hub/min sheet width: mm --------------------------------------------------: PRESS FORCES: - total force (nominal): 15 to SLIDE (MECHAN. PRESS): - variable speed: yes: - stroke rate (min.): 110 /min - stroke rate (max.): 600 /min STRIP-FEEDER: - feeder type: roll feeder: - sheet width max: 200 mm Last Overhaul: 2012 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-se SE Hässleholm
Seller: Hilco

5 work stations: Punching (550T); Notching; Shear of iron section L; Shear of flatbar; Cut of round and square bars; Machines driven by two cylinders; 5 work stations, fitted with tools for L , shearing, round and square bars, rectangular notching and punching; Quick change punch; Flat bar shearing table with adjustable guides; 2 simultaneous work stations; Greater speed backed by a powerful hydraulic unit; Special equipment for approaching at reduced pressure and slow speed; Precision punching table with X & Y measuring stops; Precision notching table with X & Y measuring stops;

Category: 109: other metal working machines
New in: used
Price: request quote
Location: EU
Seller: ProdEq Trading GmbH

pressure: 25 t no of strokes: Hub/min sheet width: mm --------------------------------------------------: PRESS FORCES: - total force (nominal): 25 to STRIP-FEEDER: - feeder type: roll feeder: Last Overhaul: 2012 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE 91126 Schwabach, Bremer Straße 8
Seller: Schrenk Werkzeugmaschinen

well-preserved, fast machine with 5 workstations Punching performance 65 to Throat depth 500 mm Stroke rate 40 / 46 per minute Drive 5.5 HP Weight inclusive MUBEA chassis approx. 3.4 to Performance data and equipment according to the pictures!

Category: 107: sheet metal working
New in: 2007
Price: request quote
Location: 49779 Niederlangen
Seller: Heinz Sanders GmbH

pressure:80 t punching cross-cut in cmm: stroke:510 mm speeds:1000 / 1500 / 2000 U/min table-size:700 x 700 mm total power requirement:5,5 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:1,6 x 0,9 x 2,0 m

Category: 106: presses
New in: 1994
Price: request quote
Location: Land-de DE 04838 Eilenburg, Walther-Rathenau-Str. 24
Seller: ZOMA Maschinenhandel

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE D - Nordrhein-Westfalen
Seller: Peter Jüttermann Werkzeugmaschinen

capacity: round bar steel 31 mm flat steel 500x18 mm work height max. 710 mm profile shear: angular steel 45° 120x13 mm profile shear: angular steel 90° 90x10 mm stroke - stepless adjustable 10-41,5 mm notching: square tool up to 16 mm hole punching press: capacity dia. x thick. 31 Ø in 20 mm punching pressure 80 t throat appr.510 mm total power requirement 7,5 kW Weight : 2,7to dimensions of the machine app. 1,99x0,85x1,89 m Accessories: div. stripper plates, div. material support tables, 2 electrical contact length stops, a lot of punches and dies

Category: 106: presses
New in: used
Price: 3.200 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Hydropneumatic functioning profile height: 160 mm Punching pressure: 35 kN at 6 bar Cons location stroke: 100 mm Cutting stroke: 20 mm Support arms More knife on request Weight: 350 kg

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 550 €
Location: Land-es ES Spain, 24252 San Pedro de Bercianos León
Seller: Surplex GmbH

Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 3600 x 1400 x 1520 mm Description: Hydraulic punching system, Motor 2.20 kw, Maximum board dimesions approx. 2500 x 700 x 40 mm, Table dimensions 2700 x 1250 mm

Category: 107: sheet metal working
New in: 1991
Price: request quote
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

Die-cutting machine Brand: Edel Type: Mikromat 204 With control BJ. 1991 FMax: 200 kN 80 bar Rest: See nameplate

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

pressure: 40 / 60 t L-beam: 100 x 10,0 mm output: max. 60 to. output: 27 mm in 11 mm output: 39 mm in 8,0 mm throat: 382 mm shear: flat material: 380 x 8,0 mm range L-W-H: 1350 x 790 x 1625 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107: sheet metal working
New in: 1998
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

CNC punching machine Euro m Punching power: 30 ton Maximum sheet thickness: 6 mm x axis: 2000 mm Y: 1.000 mm Number of stroke: 180 p/min. Feed X/y axis: 5-40 mm / min. Throat depth: 1,200 mm Table dimensions: 4,400 x 1,800 mm Equipped with: -2 metal clamps -Cabinet with many tools -Foot pedal -Dedicated PC -Operating instructions Country of origin: Italy Machine weight: 5.000 kg

Category: 405: pillow packs machines
New in: 2018
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC VERTIwrap ECO-Complete VFFS Liquid/Pump XL Complete dosing and packaging system for liquids including tank, liquid pump and outfeed conveyor. Suitable for viscous and non-viscous liquids such as cosmetic cream, tooth paste, skin lotion, shampoo, mayonnaise, ketchup, honey, fruit jam, edible oil, vinegar, juice, milk etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, suppo ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)