punching machine used for sale

Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Iberica JR-105 F Automatic Die Cutting machine Age: 1997 Max. sheet size: 750 x 1050 mm Min. sheet size: 350 x 400 mm Max. Speed: 9.000 impr./hour Max. pressure: 300 tm. Equipment: Varioplan System Automatic Feeder Feeding Table 2x Side Lays pushing and pulling system 4x Front Lays Control Panel The Cutting Unit Stripping Unit with chases and tools Non-Stop delivery Machine is elevated Machine comes with Holder Chases and Cutting Plates

Platen Size: 114x165cm, Format: 106x157cm, Speed: 800~1000, Pressure: 380 Ton, Weight: 12000 KG

Salvagnini S4.40 punching machine with shear system  CNC control: Salvagnini SysCon Specifications: Working area: 4064x 1803 mm Max dimension of the sheet: 4064x 1803 mm Min dimensions of the sheet: 370x 300 mm Min and Max Thickness: 0.5 -5 according to the material used Maximum weight of the sheet: no limit Grippers for automatic positioning of the blehe: 13x Technology: Multi-press punching head with hydraulic drive Time for the replacement of the punching tool: 0 sec (each tool is ready for use= Simulation Possibility of activating two or more punching units Weight : 19000 kg Machine dimensions: 9967x6426 mm Power 63kW Air supply: 5 bar Punching Productivity & Cutting Productivity  Maximum material thickness: Alumumuim with breaking strength 200M/mm²: 5.0 mm Steel with breaking strength 410N/mm² : 3.5 mm Stainless steel with breaking strength 680 N/mm²:  ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

Description: Triple punch 80 tonne punching power Standard gooseneck (S) 500mm Additional gooseneck (SD) 750 Steel punching capacity 42 kg/mm2 mm Ø 40 x 14 Ø 24 x 24 Punching U and I flanges 100 - 300 mm Core punching U 120 - 380 mm Core punching I 100 - 500 mm Adjustable stroke for shearing and punching stations 0 to 70 mm Punching device Gd. Ø (Option) mm Ø 100 x 6 / 50 x 12 Includes : Punching machine. Automatic X & Y positioning table without clamps. Triple punching device 31 - 40 - 31. Fitted with a Fagor 102 S control. Servomotor mobility group, independent for each axis, controlled by encoder weight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,150 mm

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

BOSCHERT COMPACT 1250 ROTATION-INDEX punching machine was manufactured in 2014 in Germany. The machine, used in precision nibbling, punching and stamping of workpieces, is characterised by excellent stability and rigidity even during demanding series machining. Workpieces with a maximum thickness of 10 mm are machined with a force of 28 tonnes on a large brush table, protecting sheet metal surfaces from scratches and scrapes. The punching tool head is equipped with a ROTATION tool station drive, which smoothly rotates each punching tool in a range of 360°, guaranteeing fast and trouble-free machining of even the most complex shapes. The punching machine is also equipped with a BOSCHERT einfach besser TFT control panel with an intuitive BOSCHERT CNC 32050 CNC controlle for programming machining modes and controlling the machine operation. The total weight of the machine is 8400 kg.  ...

EUROMAC MTX INDEX 1250/30 punching machine was manufactured in Italy in 2008. The machine used for punching in various types of sheet metal, achieves the highest precision and accuracy in machining, thanks to its capacious turret head and high press force of 30 tonnes. The process is performed on a large brush table, which significantly reduces noise level and protects the workpiece surface from scratches and nicks. The EUROMAC 1250 hydraulic punching machine is controlled via a FabriWIN CNC 68 controller with many useful functions. For transport of the machine, tables 4,5,6 are removed and the holding bar is rotated by 90°. Technical specifications of EUROMAC MTX INDEX 1250/30 punching machine - press force: 30 t - feeds in X axis: 1250-2000 mm - feeds in Y axis: 1250 mm - automatic repositioning in the X axis: up to 10000 mm - working speed (cutting, stroke 20 mm): 780 1/min  ...

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

The TRUMPF TRUMATIC 120 Rotation punching machine was built by the well-known German company TRUMPF in 1991. The compact sheet metal processing center enables profiling, punching and sheet forming. The CNC control of the machine uses a graphical interface to program the rotation of all tools. Technical data of the TRUMPF TRUMATIC 120 Rotation punching machine: Performance : - punching force: 15 t (150 kN) - maximum sheet thickness: 4 mm - maximum workpiece weight: 64 kg - maximum punching diameter: 38 mm Speeds: - maximum speed of a single axis: 40 m / min. - maximum speed of two axes simultaneously (XxY): 56 m / min. - rotary axis: 360 degrees / s, full rotation - maximum number of strokes: 320 l / min. Drive type: - X / Y / Z axis: AC motors, maintenance-free - punching: hydraulic drive Control system: TRUMAGRAPH CC 200 Accuracy: - the smallest programmable m ...

Automatic Die-Cutting/Lable Punching Machine, Max. Punching Size: 180x180mm, Min. Punching Size: 20x20mm, Max. Feeding Height: 150mm, (Height of Punching Die 60/70mm), Punching Strokes 12 p/min., Machine Output 720.000 Sheets/Hour, (Insertion 1000 Sheets/80gsm), Punching Pressure 2.500 Kg

BOSCHERT Ecco Line EL-500-Digital punching machine The BOSCHERT Ecco Line EL-500-Digital punching machine was built in 2007 in Germany. Machine with a punching force of 28 t and a maximum of 180 strokes per minute, punching in sheets with a maximum thickness of 6 mm. The machine is equipped with a working table with dimensions (W x L) 500 x 1000 mm. The total weight of the punching machine is 2 tons

Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t  Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW

This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.

Danobat PZ1631 Punching & Shearing machine (year 2005) In operation. This punching/shearing machine has automatic loading with 2 tables, punching and shearing field without replacement of 3000×1500, angular shears of 1500×800. It has unloading with a conveyor belt, it consists of 1 autoindex with a 5-tool multitool and another 3 tools plus 2 units, with a total of 47 tools. Technical characteristics: Carriage travel: X3000 – Y1500mm Maximum format: X3000-Y1500mm Shear: 800x1500mm with regulation Power: 30kva Air: PZ 100 Load 250 N/min Weight: 16t Punching: Punching force: 300 KN Material thickness: 6mm Overall stroke: 40mm Actual Stroke: 35mm Hydraulic cylinder: 130×120 Working pressure: 280bar Number of blows: 750 blows/min Positioning resolution: 0.1mm Shears: Max speed: 80m/min Hydraulic cylinder: 63x56x225 Number of Strokes: 60 strokes/min Working p ...

Universal Punching machine GEKA PUMA 50/E-750 Punching capacity: 50 T Table size: 1000 x 500 mm with length stop Drilling Capacity: Ø 27 x 13 mm Max punching in round: Ø 70 x thick 5 mm / Ø 100 x thick 3,5 mm Max punching in square: 50 x thick 5,5 mm / 60 x 4,5 mm / 70 x 4 mm Max punching in rectangle: 90 x 25 x thick 5 mm Year of construction: 1991 Throat depth: 750 mm Delivered with a set of punches Voltage: 380 V Dimensions (L x W x H): 2000 x 1300 x 2000 mm Weight: approx 2,2 T

CNC punching machine equipped with a Euromac TopPunch control unit. Italian manufacturing Capacity 300kn Machine with annual reviews carried out, very good condition of use Machine width: 3970 mm Machine depth: 3430 mm Machine weight: 8400 kg CNC: Euromac TopPunch Punching force: 300 kN X axis movement: 2250mm Y axis movement: 1250mm Main electronic connection: 400 V / 50 Hz Power consumption: 7.5 kW Automatic repositioning on the x axis: up to 10000 mm Number of d stations: 6 (including 3 index stations) Maximum number of tools in the turret magazine: 6 pieces Punching speed (nibbler mode): 780 1/min, Punching speed (20 mm stroke): 300 1/min Maximum sheet thickness: 5 mm, minimum sheet thickness: 0.5 mm Maximum blade weight: 150 kg brush table Safety barriers USB port Wide variety of tools included, with 2 multitool heads

AMADA EUROPE 245 turret press Technical data : - CNC control: FANUC 18 i-P - pressure: 20 Tons - max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of the cut sheet with interception: 1020 x 2540 mm - max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm - max. sheet thickness on the ball table: 6 mm - max. sheet thickness on the brush table: 3 mm - max. permissible weight on the table: 100 kg - punching accuracy: +-0.1 mm - positioning accuracy: +-0.07 mm - number of clamps/pneumatic holders: 2 - number of axes controlled simultaneously: 3: X, Y, C - revolver speed: 25 rpm. - number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min. - minimum programmable increment: 0.001 mm - nu ...

Table punching machine Renz DTP 340; good condition; cleaned and tested; Tool 2:1 rectangular 5.5x3.5mm; Format max.340mm; Punching thickness max.3.5mm. Desktop punching machine Renz DTP 340; good condition; cleaned and checked; tool 2:1 oblong 5.5x3.5mm; size max.340mm; Punching Thikness max.3,5mm.

fully automatic punching shearing machine consisting of MD Automatic bearing with 6 levels Punching unit with shears IA Stripping unit with 2 tables Various spare parts Punching head H2 with 4 rotating stations and 5 embossing stations Box for small parts Output in tons per year 600000 Kg Largest possible format 3000x1500 in sheet thickness 0.75/0.88/1.00/1.25/1.50/2.00 mm steel aluminium up to 3.00 mm Max. punching diameter is unlimited for nipples, fixed tools have a maximum diameter of 60 mm. Stroke per tool is 200 milli seconds. Max weight of work piece is 3000x1500x2 mm steel. Tools are 60 pcs 7 ton stations / 4 pcs 26 ton stations / 4 pcs 12 ton stations 360° rotatable.

Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360° 30 Maximum punch diameter (size D )– separate 81 mm Maximum punch diameter in XMTE4M magazine 4 x 31.7 mm Maximum punch diameter in XMTE6M magazine 6 x 24.0 mm Maximum punch diameter in XMTE10M magazine 2 x 24.8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in the Y axis (single tool) 1250 mm Working range in the X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic repositioning of clamps in the X axis up to 10,000 mm Max. positioning speed in axis Y+X 80 m/min. Axis acceleration 10 m/sec² Number of strokes – ( step 1.0mm ) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Power supply 3 x 400 V/50 Hz Machine power 8 ...

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

Machine Type: Punching/Nibbling Machine Manufacturer: EUROMAC Type: ZX INDEX Year of construction: 2007 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-3 DESCRIPTION We offer you a used CNC punching nibbling machine from the manufacturer EUROMAC. Working range X axis / 1250 mm Working range Y axis / 1000 mm Working range X axis with transfer / 2000 mm Punching force / 30 T Weight approx. 4900 kg further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers ...

Punching machine in good condition. Model: VIPROS 2510K Manufactured: in Japan in 1998 Serial number: 25100014 Punching force: 196 kN Capacities: 1250 x 2500 1250x5000 3-station turret Number of tools: 31 Weight: 11000 kg 3 security cells Liquid cooling If you have any questions, please do not hesitate to contact us. The punching machine is still powered on and can be tested if necessary.

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 ton. -Punching performance: see photo nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table, see photos -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Pega 244 is an extremely compact turret CNC punching machine with considerable punching power, ideal for processing medium format sheet metal. Punching capacity: 20 tons Working range with repositioning: 1000x2000mm Max thickness: 6mm Hydraulic brake and hydraulic clutch Characteristics of the CNC: Fanuc Amadam COMPLETE WITH CUSTOM MADE SOUNDPROOFING CABIN

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

Tartellette machine / floor punching machine Peerless Model: OMatic Floor-standing machine with 5 moulds Machine with adjustable step heating for punching head. For molds: Upper diameter: 120 mm Bottom diameter: 115 mm Height: 20 mm Mass: Width: 800 mm Depth: 800 mm Height: 1900 mm Condition: very good, mechanically tested, ex service

Durma turret punching machine, type PP 12530. Technical data: Max pressure 300 kN (30 T) Max sheet thickness (for carbon steel) 6 mm Max sheet thickness (for stainless steel) 4 mm Max X axis travel 2000 mm + Automatic Reposition Max Y axis travel (MUTLITOOL) 1250 mm Max Y axis travel (one tool) 1280 mm Automatic positioning range up to 10,000 mm Max number of strokes (nibbling) 600 / min Number of terminals 2 pcs. Gripping force 1000 kg Working height 980 mm Table dimensions 2400 x 3600 mm Max tool diameter in the MULTITOOL head 24 mm Maximum diameter of a single tool 88.9 mm 7.5 kW power Oil tank capacity 160 l Machine dimensions 3600 × 4100 × 2450 mm Weight 8,600 kg Equipment of the PP 12530 punching machine: SIEMENS SINUMERIK 840Di control; MUTITOOL 6 head for tools; Brush table; Automatic control of the correct position of the clamps; Automati ...

FINN-POWER model A5 punching machine with a punching force of 23T, up to a thickness of 6mm. Machine used only for production trials and prototype construction. Worked only 2655 h. Machine connected to electricity possibility of seeing and checking the machine during operation. Tool storage for 20 pieces including in one station multitool for 10 tools, which increases the number of tools to 29pcs.

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

Used Imac HP 1000 X 2000 CNC punching machine Punching machine Imac mod. HP 1000X2000 with touchscreen CNC and cam software on board the machine equipped with various punches

This Euromac MTX Flex 6 Punching Machine was manufactured in 2014 in Italy. It has been working for only 3094 hours. It is equipped with a Euromac TopPunch control unit. This machine can operate with a punching force of 300 kN. It includes as additional equipment some drop tooling and safety light barriers, everything is brand new, never used. Also software is included. This machine like a new one.

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...