126,706 used machines on RESALE, but how to find them? Machine Search
Key data: 3075 mm, 1545 mm
Technical data – machine • Manufacturer: BALLIU nv (Belgium) • Machine type: MINOTAUR • Year of construction: 2014 • Machine type: CO₂ laser cutting machine (portal) • Working area: Large format flatbed (4XL) • Control: BALLIU / Industrial Control • Power supply: 3× 400 V / 50–60 Hz • CE compliant ⸻ Technical data – laser source • Laser manufacturer: ROFIN-SINAR Laser GmbH (Germany) • Type: DC 025 • Laser type: CO₂ laser, diffusion-cooled • Laser power: approx. 250 W • Cooling: Water cooling • Weight laser: approx. 545 kg • Standards: CE / CDRH / DLR license
AJAN SHP 260 plasma-gas cutting machine was built in 2015 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd Şti. The machine, distinguished by its high efficiency, is an excellent choice for thermal cutting of sheet metal. The machining process is performed by means of reliable torches, located on two separate gantries. This solution, combined with the large surface area of the work table, enables the machining of more than one sheet at a time with different cutting methods. The AJAN plasma-gas cutting machine is offered with equipment that includes, among others, a HYPERTHERM plasma source of the highest energy efficiency, exhaust extraction and a track. The total weight of the machine is 520 kg. Technical specifications of the AJAN SHP 260 plasma-gas cutting machine - CNC controller: AJAN - working table dimensions (L x W): 16000 x 3000 mm - plasma source: HYPERTHERM - plasm ...
Key data: 400 mm, 375 mm, 250 mm
With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.
EMCO Hyperturn 45 - CNC lathe - Main spindle equipped with full-clamping cylinder (operation with bar feeder not possible or loading and unloading via automatic. Swivel loader, see video) - Year of construction 2011 Technical data Working Range: - Maximum circumferential diameter over bed: 430 mm - Circumferential diameter over face slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar passage: 45 mm - Distance main spindle - counter spindle (spindle lugs): 720 mm Carriage travel range: - Carriage travel X / X2: 160 / 150 mm - Carriage travel Z / Z2 / Z3: 510 / 510 / 510 mm Main spindle (spindle 1): - Spindle connection - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Maximum mass inertia for clamping device and workpiece: 0.08 kgm² Main spindle clamping system: - Hollow clamping cylinder ...
STIGAL VXstandard plasma cutting machine was built in 2020 in Poland by STIGAL Marcin Stępień. The machine, distinguished by its exceptional precision, is the perfect choice for thermal cutting of workpieces with a maximum thickness of 20 mm. The machining process is performed on a stable work table, whose open design offers free access to the workspace from all sides. The dust and gas extraction system (ECTS), which is integrated into the worktable, effectively removes contaminants generated during machining, providing a comfortable work environment. This is all complemented by a touchscreen operator panel with CNC control. The STIGAL VX-standard plasma cutting machine is offered with a reliable CEBORA plasma source of the highest energy efficiency. Technical specifications of STIGAL VXstandard plasma cutting machine - touchscreen operator panel with CNC controller - maximum shee ...
Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm
Key data: 2700 mm, 2200 mm, 1050 mm
CNC travelling column machining centre from the manufacturer MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for the precise and heavy-duty machining of large-format workpieces. The machine is designed in a classic travelling column design and is particularly suitable for tool, mould and machine building with a new design. Distance spindle nose – table Vertical: approx. 300 – 1,350 mm with universal milling head (UFK): Vertical: approx. –290 to +760 mm Horizontal: approx. –55 to +995 mm in the table area: approx. 180 – 955 mm Spindle / Speeds Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK) Rotation around vertical axis: 360° (indexing 2.5°) Horizontal axis swivel: ±110° (indexing 2.5°) Electrical data (nameplate) Connected load: ...
Key data: 253 mm, 1000 mm
CNC Lathe, Model: SL - 253 BMC / 1000
Key data: 800 mm, 650 mm, 550 mm
Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little
gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2
Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm
CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock
CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208
Fabricante DAEWOO Modelo PUMA 2000 SY Año 2003 CNC FANUC 18i – T Capacidades Diámetro máx. sobre bancada 600 mm. Diámetro máx. sobre carro 550 mm. Diámetro máx. torneable 330 mm. Longitud máx. torneable 510 mm. Recorridos y avances Recorrido Eje X 250 mm. Recorrido Eje Z 580 mm. Recorrido Eje Y 100 (±50) mm. Recorrido Eje B 580 mm. Avance Rápido eje X 20 m/min. Avance Rápido eje Z 24 m/min. Avance Rápido Y 7,5 m/min Avance Rápido B 20 m/min. Cabezal Eje C INCLUIDO Indexación eje C 0.001 º Paso de barra 76 mm Nariz A2#6 Velocidad 4.500 rpm. Potencia 15 kW Sub-cabezal Eje C INCLUIDO Indexación eje C 0.001º Paso de barra 45 mm Velocidad 6.000 rpm Potencia 7.5 kW Torreta y Herramientas motorizadas Numero de Posiciones Torreta 12 Dimensiones de la Herramienta 25 mm Tiempo de Indexación Torreta 0.1 s Velocidad Herramienta Motorizada 5 ...
The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.
Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min
Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min
MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools
Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power
Key data: 32 mm, 32 mm, 330 mm
CNC Longitudinal Lathe Brand: Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultsfred warehouse Sweden Availability : direct from stock Technical data Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\] W ...
Key data: 3000 mm, 4000 mm, 1500 mm
Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.
CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg
used
The machine is in good technical condition, testing is possible by prior arrangement.
TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg
EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg
The machine is in good technical condition, after prior agreement it is possible to test it. spindle passage 65 mm. 38444 operating hours, spindle approx. 1/3 of the machine's operating hours. Yes, it is a Sinumerik. Chuck SCHUNK ROTA THW plus 215-65
The machine is in good technical condition, testing is possible by prior arrangement.
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2006 CNC Control: Global Control Working area: 3 x 12 m Track width: 4,000 mm Track length: 15 m Extraction table 1 x Plasma torch with Hypertherm HPR260 1 x Plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system
Key data: 350 mm, 700 mm
DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available
CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions
WE SELL AN NICE CONDITION HERMLE C40U FULLY EQUIPED WITH COMPLETE FULL TOLS ACCESSORIESS MACHINE IS WORKING IN PRODUCTION DAILY ORDERS. THIS IS AN VERY NICE OPORTUNETEY MACHINE WILL BE AWAILIBLE IN NEXT WEEKS FOR PICKING UP TECHNICAL DATA: x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t EQUIPMENT: MACHINE WILL COME EQUIPED WITH COMPLETE WORKING PLACE , WITH ALL COMPLETE TOOLS AND ACCESSORIESS. COMPLETE TOOLINGS COMPLETE CUTTING TOOLS COM ...
Key data: 250 mm, 500 mm, 3800 1/min
The machine is in good condition and fully functional. It can currently be visited under power. Included is the hydraulic three-jaw chuck, furthermore it has a hydraulic tailstock which is movable. The machine does not have a chip conveyor, but it does have a chip tray.
Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
CNC - Universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Built in 1997 -Travel X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - Horizontal milling device -Drill quill -Coolant device -Angle table -Machine enclosure -Documentation Dimensions: LxWxH 3,9x2x2Meter / Weight 4000Kg Hobkn Au Sjv Iklus Tol
TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of Make: 2005 CNC Control: Global Control Plus Track width: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L weld seam preparations (chamfers) 1 x Skew Rotator with Power Source Kjellberg FineFocus 800 3 x oxy-fuel burner ALFA 1 x FineMarker marking unit Without table, filter and running track
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 600 Z 700 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Swivel rotary table 0 630 mm Swivel milling head ( Horizontal + Vertical ) Universal tool changer with 60 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting 50 pcs SK 40 tool holders IKZ – 40 bar Chip conveyor Rotoclear 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Operating Instructions THE MACHINE COMES FROM AN INSTITUTE AND IS IN TOP CONDITION POWER-ON HOURS: 29496 hrs PROGRAM HOURS: 10050 hrs.
Trumpf TruLaser 5030 with double tower storage system - laser cutting system - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of construction 2013 Facilities - Working area: 3000 x 1500 mm - Closed machine frame - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drive - Closed beam guidance via optical cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Trumpf Laser - LLK according to standard layout (laser right next to the machine) - Laser cooling unit (water-air) - Excitation ...
Key data: 1250 mm, 1400 mm
Inv. Num. : 8970 Type: BT 1250 C2 Producer: TOS HULIN Created: 2016 Parameters: Switch-on hours: 15429 h Equipment: C-axis Powered tools Max. turning diameter: 1,400 mm Face plate diameter: 1,250 mm Max. workpiece height: 1,400 mm Max. workpiece weight: 8,000 kg Speed range faceplate: 2–400 rpm (2-stage infinitely variable control) Main drive SIEMENS: 44 kW Driven tools: 4–3,000 rpm Power tool drive SIEMENS: 22 kW Max. cutting force: 50,000 N Dimensions and weight: Machine height: 5,555 mm Space requirement incl. protective cover: 7,470 x 5,725 mm Total weight: approx. 34,000 kg Ideal for heavy-duty machining, energy plant construction and large rotationally symmetrical components.
Key data: 1600 mm, 2000 mm, 1500 mm
Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg
TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z ...
used
Max. X-axis stroke 200 mm Max. Y-axis stroke 220 mm Max. Z-axis stroke 280 mm Max. workpiece diameter 200 mm Max. workpiece height 200 mm Max. workpiece weight 100 kg
Key data: 850 mm, 700 mm, 500 mm
Inv. Num. : 8976 Type: C 400 U Producer: Hermle Created: 2015 Parameters: Control system: Heidenhain iTNC 530 Number of stacking positions: 38 Number of axles: 5 pieces X-axis travel: 850 mm Y-axis travel: 700 mm Travel Z axis: 500 mm Cone: SK40 Electric spindle speed: 18000 1/min Spindle cooling: 40 bar Rotary table Ø 650 mm A 91° / -139° C 360° BLUM Tool Measuring System BLUM workpiece probes Direct torque drives in rotary axes Chip conveyor Oil mist extraction Electronic handwheel
Key data: 450 mm, 600 mm, 330 mm
Catalog No. : 8975 Type: C 22 U Producer: Hermle Made in: 2018 Characteristic: Control system: Heidenhain TNC 640 Total hours: 23,000 h Number of stack positions: 192 Number of axis: 5 pcs X-Axis travels: 450 mm Y-Axis travels: 600 mm Z-Axis travels: 330 mm Block speed: 18000 1/min Taper: HSK-A63 Internal cooling: 80 bar Rotary table Ø 320 mm A ±135° / C 360° Hermle IH30/60 handling system (active) BLUM tool measuring system (LC50) BLUM workpiece probe (TC52) Dynamic Precision
maximum number of results exceeded
please refine your search
