products line used for sale

Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 –  ...

Used Krones Filling Line for Flat Drinks in Glass 1997 Manufacturer: KRONES Bought new and installed in 1997 It fills juices, syrups, alcohol Accessories for bottles 0,2 – 0,7 – 1,0 L Capacity: 4,000 L/h Monoblock, frequency regulator Rinser for glass bottles Vacuum filler Krones Capper with Al MCA 28 caps Labeller KRONES–Binetta with precut paper labels, hot glue One label up to half the extent of the bottle (with a possibility for neck), accessories. The control unit replaced in this Krones line There are some conveyor belts in the Krones plant The equipment has relatively few operating hours It has been disconnected for the last 5 years and stored

Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL  ...

Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immed ...

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the  ...

Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smoo ...

Used Complete Bottling Line for PET and Glass 2007 Year: 2007 | Speed: 14,000 bph | Containers: PET and glass | Formats: 250 ml, 600 ml, 1 L | Products: Juice, still water. This PET bottling machinery is configured as a full factory line with depalletizing, blow molding, rinsing, filling/capping, inspection, pasteurization, packing, and palletizing. Ready for operation. This listing is used equipment for PET bottles and glass bottles in the stated formats. Depalletizer: Icon (2007) Blow Molding Machine: Sidel SBO 10/14 Four (1994) Rinsing Machine: Gem (2007) Filling Monoblock: Icon 5000 30/10 (2007) Labeling Machine: Kosme Merkur 16 T S1 S2 ADV (1995) Capping Machines: Arol EURO/PK (2007); Alcoa VK-138 Headset 55950 (2007) Inspector / Induction Sealer: Enercon (2007) Pasteurizer: Tetra Pak® (2007) Wrap Around Packer: Dimac Star Wrap 25 (2007) Lane Divider: SMI DIVIPACK 200 (2002) Pallet ...

Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, t ...

Used Doypack Filling Line kg/h Filling Line Technical Configuration The used Doypack filling line, rated at 600 kg/h, comprises a series of 2015 machines that offer precision, hygiene, and reliability in filling flexible pouches. The process begins with product preparation and feeding, ensuring uniform consistency and stability before filling. Next, a FL Tecnics machine, model FL 2.2, handles pouch feeding, weight filling, sealing, and packaging. Specifically, a VARPE control system measures the weight of the product in each pouch with high precision, minimizing variations and waste. Simultaneously, another VARPE unit performs an X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a crucial level of safety and quality control. Meanwhile, a spiral airflow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, th ...

Used aseptic filling line Tetra Pak A3 FLEX V150 200S up to 7000 l/hThe Used aseptic filling line Tetra Pak A3 FLEX V150 200S up to 7000 l/h provides an advanced solution for the aseptic bottling of dairy products and fruit juices. Consequently, this line fills 200 ml Slim Brick containers, ensuring high production efficiency and maintaining the sterility of the product throughout the entire packaging process.Line Features of the Used aseptic filling line Tetra Pak A3 FLEXThe bottling line operates with a capacity of up to 7000 liters per hour, ensuring high standards of safety and quality. Furthermore, the aseptic system prevents bacterial contamination, making this solution ideal for packaging sensitive liquids. Additionally, the line includes a conveyor system that facilitates the smooth transfer of containers between different processing stages, ensuring an uninterrupted workflow.Mac ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Q ...

Technical Specifications & Performance Data This complete mixed new–used PET bottling line is engineered for high-speed carbonated soft drink production, delivering reliable performance at industrial scale while maintaining precise isobaric filling for carbonation retention and product integrity. Nominal speed: up to 25,000 bottles/hour (format- and product-dependent) Container type: PET (line configuration optimized for PET) Bottle formats: 0.06 L, 0.25 L, 0.50 L Neck finish: PCO 1881; compatible with lightweight CSD closures Filling technology: isobaric counter-pressure for carbonated beverages Product range: carbonated soft drinks; adaptable for flavored water and energy drinks Primary equipment brands: Sipa (SFR 16 blow molder), Sacmi (isobaric filler-capper), UBL SRL (labeling), Dimac (shrink wrapping), Robopac (palletizing/stretch), SIAD (process gases and compressors), plus conv ...

Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, ...

Technical Specifications & Performance Data Line type: Used complete bottling line (second hand) configured for PET still water Manufacturers: Krones and Gebo Cermex Year of build: 2013 Nominal speed: up to 31,500 bottles/hour (0.35 L and 0.50 L) Bottle formats: 0.35 L, 0.50 L Container type: PET with 29/25 neck Product type: Still water (non-carbonated) Main modules: Krones Contifeed preform feeder, Krones Preform Check Inspector, Krones Contiform stretch blow molder, Krones ErgoBloc L 40-15 blow–fill–cap monoblock, Krones Checkmat cap inspector, Krones Contiroll roll-fed labeler, Gebo Cermex shrink wrapper, Gebo Cermex case packer Line condition: In production Documentation: OEM manuals available Safety: Safety features and guarding included Advanced Automation & Control Systems This used bottling line leverages Krones’ integrated line control for synchronized blow molding, filli ...

Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. U ...

Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC mon ...

Technical Specifications & Performance Data Complete 2016 glass beer line built around a GAI monoblock and Enos labeler, in ready for operation condition. Throughput up to 900 bottles/hour across 0.33 L, 0.50 L, 0.70 L formats with isobaric counter-pressure filling for carbonated beer. This unit is delivered as second-hand used beer bottling equipment with documented components and safety features. Manufacturer: GAI (filling monoblock), Enos (labeling) Production speed: up to 900 bottles/hour Filling technology: Isobaric counter-pressure Container types: Glass bottles Bottle formats: 0.33 L, 0.50 L, 0.70 L Product types: Beer (configured for carbonated products) Line components: GAI rinsing–filling–capping monoblock with crown capper; Enos labeling system Condition: READY FOR OPERATION Documentation: Manuals available Safety: Guarding and interlocks consistent with modern lines Manuf ...

Used Aseptic Fllling Line SIPA GEA for milk up to 48.000 bph GEA ASEPTIC BLOW FILL SYSTEM ABF 2.0 Fully aseptic blowing, filling and capping system featuring H2O2-based preforms sterilization. Line Overview and Capacity Built in 2018, this complete aseptic PET line is configured for 38 mm neck and processes milk in 235 ml bottles with plastic screw caps. The line is ready for operation and has approximately 900 operating hours. Designed for high throughput, the configuration supports production up to 48,000 bph under aseptic conditions. As a compact aseptic solution within a used milk bottling plant, it combines decontamination, blowing, filling, and capping in a controlled environment to protect product integrity. Category: Complete Bottling Line Product Types: Dairy Container Types: PET Fill type: Aseptic Neck type: 38 Formats: 250 ml Technical specs (data record): Year: 2018; Speed: 4 ...

Used complete line for still wine - 8000 BPH Technical Specifications & Performance Data Runs at 8,000 bottles/hour on 0.75 L glass with straight-cork (flush-to-mouth) closure. The layout centers on a filling monoblock (2002) combining rinser, filler, and capper, followed by a capsuling/shrink unit (2002), Kosme labeling, and APE Impianti case handling. Built as wine bottling machinery for still wine, the configuration supports consistent fill levels, reliable sealing, and integrated downstream packing. Production speed: 8,000 bottles per hour Filling Monoblock: Model 36/1440.40/1440LV.6/360 RSX (Year 2002) – Rinser, Filler, Capper Capping System: Straight cork (flush-to-mouth) Capsuling/Shrinkage: Model POKER Z 6/8 (Year 2002) Compatible formats: Typical case pack pattern 12 x 0.75 L; additional formats with change parts Containers: Glass bottle handling (cylindrical containers) Label ...

Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...

Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine ...

Used bottling line GAI for still wine up to 1000 bph Bottling line structure of the Used GAI filling line for still wine The line operates as a fully automated system that bottles still wines at a rate of up to 1000 bottles per hour. Consequently, the system ensures a seamless process by including a GAI filling and corking monoblock, an MEB ADL10 S2 labeling and capsuling machine, and an integrated conveyor system that guarantees continuous operation. Furthermore, each component is designed for efficiency and reliability. GAI filling and corking monoblock This bottling line for still wine features a GAI monoblock that fills and corks bottles within a single unit. Specifically, the filling system uses eight filling valves that operate under vacuum to optimize efficiency and, as a result, reduce product oxidation. Moreover, the corking system includes a single head corker designed for stra ...

Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and pack ...

Technical Specifications & Performance Data This used bottling line is an integrated SIDEL-based solution for PET still water, engineered for consistent throughput and high line efficiency in beverage production and industrial packaging environments. Nominal speed: 14,400 bottles/hour Bottle formats: 0.06 L, 0.50 L, 0.75 L Container type: PET (neck handling 25–30 mm) Product: Water (still) Core block: Sidel Combi 8-40-8 (SBO 8 blow molder + 40-valve filler + 8-head capper), year 2006 Secondary packaging: CERMEX tray packer for stable tray bundles (small and medium PET formats) Air & cooling: SIAD TEMPO 2 high-pressure compressor 1,500 m³/h; Baltimore Aircoil BAC F-100 evaporative cooling support Conveying: Sidel conveyors for balanced accumulation and smooth transfer Condition: Ready for operation with safety features included Manufacturers involved: Sidel, Cermex, SIAD, Baltimore Air ...

Complete Bottling Line for Water (PET 1.5L) – Overview 2010 complete line for PET 1.5L water, nominal 16,000 bottles/hour (operational range 12,000–16,000 bph), isobaric with neck 28 and fill type 5. Configured for still and sparkling water and supplied in ready for operation condition. This used PET bottling machinery layout covers preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors for end‑to‑end production. Key units installed: preform tipper and elevator (2010), blow molding machine (2010), filling machine (1999), cap feeder, labeling machine (2004), shrink wrapper (2019), handle applicator (2002). Additional equipment includes mixer, palletizing, and conveyors. Technical Specifications & Performance Data Category: Complete Bottling Line Year: 2010 Condition: ready for operation Production speed:  ...

Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  D ...

Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) ...

Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nom ...

Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated  ...

Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout d ...

Stephan UM/SK 150 Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 1x cutting blade, maximum working pressure in the bowl -1 / 0,8 bar, maximum temperature in the bowl 110 °C, vacuum connection on the bowl, mounted on the lid a scraper agitator for the wall, electric driven (1,5 kW - n1: 1.410 rpm - n2: 25 rpm), 2 manual tightening clamp,hydralic cylinder for easy opening the lid, tiltable for emptying the bowl (no pneumatic outlet valve). Main motor for the cutting knife, integrated vacuumpump and a stainless steel control panel with Siemens S5 PLC and Siemens operation panel. Several spare parts included., Type of ...

Two custom-built machines for the automatic production of pre-grouted tile panels are available. Bonding material: two-component PU grout, max. production capacity: approx. 50m²/h, min. tile format: 97mm/97mm, max. tile format: 197mm/197mm, splitter plate format: 244mm/119mm. This is a complete production line up to the packaging stage. The PU pipes have become clogged after a long period of time and must be replaced. Including various spare parts. Documentation available. An on-site inspection is possible.

TECHNICAL DATA: Width of the sealing bar: 1300 mm Width of the roll: max. 1300 mm Machinable height: max. 370 mm Dimensions of the shrink tunnel: 1100 x 2000 x 500 mm Voltage: 400 V Frequency: 50 Hz

Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data Line type: Complete automatic can filling line Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray Controls: PLC Siemens S7, Siemens SIMATIC HMI Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal,  ...

Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors ...

Used COMAC can filling line for beer 6000 CPHTechnical Specifications & Performance DataThis complete can bottling line engineered around a Co.Mac filling and seaming monoblock is designed for efficient beverage production in industrial packaging environments. Optimized for carbonated beer, it provides reliable performance for standard can formats with precise isobaric filling and robust quality control. As a used bottling line, it offers second hand value with professional features suitable for modern beverage production.Product: Carbonated beerFilling temperature: 2–4°CCO₂ quantity: up to 5.5 g/LProduction speed (reference): 6,000 cph on 0.33L; 5,500 cph on 0.44LContainer types: Two-piece aluminum cans with SOTCan formats: Compatible with 0.33L and 0.44LDiameter: 66 mmClosure: 202 can endRequired product pressure: 3–4 barRequired water pressure: 3–4 barRequired air pressure: 6 ...

Stenner resaw line VHET 105, With System TM de-stacking, infeed, outfeed and stacking

Stock number: R1259, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: In-Line Disperser and Homogenizer, Lying: Stainless frame, Motor: 15 kW - 400 Volt - 1460/2915 rpm., Dimensions: L 1800 x W 600 x H 650 mm., Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Ystral, Type: Conti-TDS-3, Year: 1999, Other: Flushed sealing

Wolff Turbitherm WUM-120 Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling (maximum pressure 4 bar and maximum temperature 151 °C) , 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 3x cutting blades, maximum working pressure in the bowl Vacuum / 1 bar (protected with overpressure valve), maximum temperature in the bowl 119 °C, vacuum connection on the bowl, dearation connection on the bowl, mounted on the lid a scraper agitator for the wall, electric driven (1,1 kW - n1: 1.400 rpm - n2: 21 rpm), 5 manual tightening clamps, hydraulic system for tilting the bowl for easy emptying and for easy opening of the lid. Pneumatic outlet valve. Main motor for the cutting knife: 380 V - 50 ...

A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible.

Key data: 1250 mm, 1 mm

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm

Description Item # 9358 - RUSK & CRUMB (Breadcrumb-Type Filler) PRODUCTION AND PACKAGING LINE Suitable for bakery crumb, coating crumb, and meat-industry filler manufacturing A complete, proven rusk and flake-bake production line, formerly processing 3 tonnes/hour of flour into 2.5 tonnes/hour of finished rusk and flake bake (used as a filler in sausages, pies, coatings and stuffing mixes). The line ran continuously until the site was sold in December 2025, with numerous safety upgrades installed throughout its operating life. Line includes: 2x Baker Perkins dough mixers – recently upgraded motors and gearboxes Dough sheet former – forms the dough sheet ahead of the oven Spooner oven – stainless steel panelling, three burners and controls renewed in 2024 Peg roller – breaks the biscuit sheet at oven exit Cracker – reduces biscuit to a manageable size for the next process 2x Mik ...

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1446, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h

Number of machnines: 4 St Control: Siemens Tool changer: 1 Pos Plant Consists of 4 Machines Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 Workpiece Setup Stations Replacement Pallets Automatic Tool Supply System (WBG) Automatic Pallet System Pallet Storage Rack The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About Us More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with  ...

Used QUINTI EASY LINE SYSTEM - BEER48 - 500 BPH - Year 2020Technical Specifications & Performance DataThis used bottling line is a compact, second hand solution engineered for small to mid-scale beer producers seeking reliable industrial packaging performance. Manufactured by Quinti in 2020, the Easy Line System BEER48 handles multiple glass bottle sizes with consistent fill accuracy and streamlined handling. Its integrated modules cover rinsing, filling, labeling, coding, and cap-seal application, supported by accumulation tables for smooth infeed and outfeed.Manufacturer: QuintiModel: Easy Line System – BEER48Year: 2020Production speed: up to 500 bottles/hour (approximately 150–180 L/h)Filler: 2 filling headsRinser: manual rinser with 1 washing head + 1 drying headLabeling: 1 reel, capability to apply 2 labels from the same rollCap-seal application: self-adhesive reel type applied  ...

Line is consisting of:, Tetra Pak Laval Hoyer extrusion line, Type: ARB.BORD IND, Serial number: 348-5214, Year of construction: 1998, Capacity: 27000 sandwiches/hr, Tetra Laval Food Hoyer spiral freezer, Type: ST LINE 1100, Serial number: 348-1023, Year of construction: 1998, Refrigerant: NH3, Ammonia, Evaporator: 2 pc. Retech GLS 50-18-280, Tetra Pak Laval Hoyer dip and transfer unit, 12 lane, Tetra Pak Hoyer 6 lane wrapper, Type: HOYWRAP MW1200-6, Serial number: Z415.3872, Year of construction: 1998, Tetra Pak Hoyer, Type: HOYPACK FLEX TL, Serial number: Z423.1013, Year of construction: 1999

Line consisting of:, Rex vacuumfiller, Model: RVF 761, Serial number: 7611040927, Hopper: 250 litres, Pump capacity: max. 6100 kg/hr, Filling pressure: max. 70 bar, Working hours: 19648, Power: 3 x 400V, 50Hz, 15kW, Dimensions: 2320 x 1440 x 3035 mm, Weight: 1100 kg, DJM Food Processing coextrusion system, Model: COEX 4, Serial number: N500003, Year of construction: 2019, Diaphragm: 4 pieces, Capacity: up to 100 strokes/min., Product diameter: max. 60 mm, Product temperature: -2 °C to +45 °C, Belt width: 440 mm, Belt length: 1920 mm, Belt speed: 3 - 15 m/min., Power: 3 x 400V, 50Hz, 20kW, Dimensions: 2030 x 1625 x 2281 mm, Weight: 2500 kg

Deighton forming machine, Type: Formatic R2200 / 180, Serial number: R2200/22/10/368, Capacity: max 4400 products per hour, Hopper: 20 litres, Belt width: 120 mm, Power: 230VAC, 1Ph, 50Hz, 0.75kW, Dimensions: 1150 x 900 x 1500 mm, Weight: 95 kg, Deighton flattening conveyor, Type: FL, Serial number: FL 16/04/036, Belt width: 175 mm, Power: 230VAC, 1Ph, 50Hz, 0.18kW, Dimensions:1450 x 650 x 1200mm, Weight: 48 kg, Deighton preduster, Type: 200W Econodust M/C, Serial number: ED 22/09/068, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.51kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton battering machine, Type: 200W weir Econorobe M/C, Serial number: WER 22/09/067, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.88kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton mixer, Type: Batter mixer, Serial number: M 22/10/073, Mixer: 200 litres, Power: 230VAC, 1Ph, 50Hz, 1.5kW, Di ...

Technical details Speed: 6000 Bottles/hour Products: Wine (Still) Containers: Glass, PET Formats: 0.187 L PET bottle Safety features: Yes Manuals: Yes Fill type: Gravity/light depression Neck type: 22 mm Consisting of: - Conveyors Conpart The line ensures seamless movement of bottles using conveyors with suction systems, stabilizing each bottle while maintaining a nominal capacity of 7200 bottles per hour. Filling Monoblock Euro Star LDG24-24-4V, Year 2014 - Operates with a rinser / blower equipped with 24 clamps, enabling a secure grip on the bottle neck. The injection system prevents fluid flow when bottles are absent. - Fills wine using 24 stainless steel spouts, which manage slight vacuum and inert gas overpressure to maintain ideal filling conditions. As a result, the conical-bottomed tank ensures complete product discharge at the end of each cycle. Labeling Machine Conpa ...

consisting of:  - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour Details: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition