production used for sale

Used Stork UHT Plant – Model 2000 Reliable UHT processing plant designed for the sterilization and treatment of dairy and plant-based beverages. The Stork Model 2000 offers efficient thermal processing and is suitable for medium-capacity production of UHT products. General Information - Manufacturer: Stork - Model: 2000 - Refurbishment: Completely refurbished in 2015 - Condition: Very good used condition Technical Specifications - Capacity: 1,600 l/h - Control System: Siemens S7 PLC Suitable Products - The plant is designed for processing a wide range of UHT beverages, including: - UHT milk (plain / white) - Chocolate milk - Flavoured milk - Soya UHT drinks Key Advantages - Reliable Stork UHT processing technology - Completely refurbished in 2015 - Suitable for dairy and plant-based beverages - Equipped with Siemens S7 PLC control system - Compact solutio ...

Used production line for the production of fruit - vegetable products ( jams, mousses, pastes, soups) in glass jars. Capacity 2400 jars/hour. Line composition: 1. vacuum evaporator for jam Spomasz Pleszew, 2. vacuum evaporator for jam Spomasz Pleszew, 3. equipment set for product transport and line cleaning: - Pneumatic diaphragm pump, - Centrifugal pump. 4. buffer conveyor for loading empty jars Marba Sp. z o.o. 5. metallurgical clean jar washer Marba Sp. z o.o. 6. two-piston dosing device Marba Sp. z o.o. 7. twist-off lid remover Marba Sp. z o.o. Lid capper type: Twist off Marba Sp. z o.o. 9. 9. X-RAY Mekitec Sidemeki two-lamp contamination detector, 10. plate conveyors Marba Sp. z o.o. 11. cooling tunnel, type: TC-HRW 5 including HERMIS dehumidification, 12. water cooling tower CWT 5/600 CH Technika Chłodnicza Sp. z o.o 13. jar eliminator, type: ENS, Marba  ...

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Used pet food production and packaging line made by Waldner. New 1995.

APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...

Theisen & Bonitz tb sprint 310 VP, machine number 310 VP 2784, year of construction 2001, 10 stations, format min. 65 x 100 mm - max. 350 x 500 mm, flat pile feeder, stacking height 30 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

KlicK board plasterboard production machine was built in 2020 in Poland. The system has been specially designed for the production of innovative gypsum boards, which are used in residential and commercial construction. It features a number of state-of-the-art components with the best technical parameters, which significantly facilitate and accelerate the entire production cycle. The KlicK board plasterboard is distinguished by a unique snap-in section in the form of a click profile. This enables the board to be quickly and easily assembled at right angles, resulting in a stable outside corner. Simply fold the board along the profile and it clicks into the desired shape. During transport, the profile is secured by a transport strip, which is removed when the drywall is delivered to the assembly site. All this makes KlicK board an enormous saving in labour time. The entire production ...

Pallet line, pallet production, Euro pallets Complete production line for Euro pallets From round timber to finished pallets Debarking Band saw Multi-rip saw Cutting saw Length sorting system Stacking system Conveyors Nail Machines (Böhm & Kruse) and so on.

Manufacturer: Kraft-Homag-Viet, Beabeitung: Rohlinge Kaliberieren-Formatieren- Fälzen und Kaliberieren, Herstellung von: Innentüren, Work piece width min-max mm: 1300 X 2200, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 50-2200, Manufacturer1: Bargstedt, Machine type1: Beschickungsanlage doppelseitig, Year of manufacture1: ca 2000, Manufacturer2: Viet Kalibrieranlage, Machine type2: 4 Aggregate Walze/Schuh, Year of manufacture2: ca.1998, Manufacturer3: Homag Doppelendprofiler, Machine type3: Längsprofilerer, Year of manufacture3: Überholt 2004,

Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The  ...

Used complete production line for yellow cheese, made by TEWES-BIS Poland. New 2019. Production line for yellow cheese, e.g. Gouda, Edam, Dutch type. Daily capacity: Processing up to 180,000 litres of milk per day. TECHNOLOGICAL SPECIFICATION (MAIN MODULES): Section 1: Preparation of cheese milk: o Milk repasteuriser with a capacity of 15 m³/h. Section 2: Preparation of cheese curds: o Cheese boiler with a capacity of 12 m³. o Hot water generator for boilers. o Process water pasteuriser (5 m³/h) with a 10 m³ tank. o Set of process pumps (whey, curd) with a capacity of 25 m³/h each. Section 3: Cheese room – Moulding and pressing: o Curd buffer tank (10 m³) with pump. o Under-mould forming device (UFP) for Dutch cheese. o Complete mould circuit (300x500x100) with cover applicator and remover. o Final pressing system: 144 pressing points. o Tunnel mould washe ...

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Used SJ 50/30 filament production line equipped with an air-cooled head. Technical parameters: - screw diameter 55 mm - L/D 30, effective screw length 1500 mm - Screw rotation speed: 60 rpm - forced feed unit for raw material to the plasticizing system with a power of 1.5 kW / vertical screw system with cylinder . - Main drive motor power 12 kW - capacity approx. 50 kg/h Heating sections and power : - Cylinder 6 kW / three heating sections plus head - Head connector / mechanical screen exchanger with a power of 2 kW - Air cooling of the cylinder and head / motor with a power of 0.18 kW - Raw material: PP/PE ABS/PLA/PETG plastics Weight approx. 800 kg.

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,

Used mozzarella production line. New 2013. The line includes: - Tank for preliminary pressing of cheese curd - LT150 thermizer - Molds for shaping the curd - Chilled water tanks - Brine tanks - Tube heat exchanger for cooling brine Cheese curd plasticizing set consisting of: Tanks for pre-pressing cheese curd with an automatic device for cutting into small portions. The prepared cheese curd is fed into the thermizer for plasticization. The plasticized mass is manually formed into cheese molds. The portions prepared in this way, packed in molds, are cooled in an ice water tank. After cooling, they are removed from the molds and placed in brine tanks. After salting, the mozzarella blocks are sent to a ripening room with specific temperature and humidity parameters.

Trennsäge - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Depositor, 2 tanks, 4 heads per tank.

Very well preserved, almost new KÄLIN grinding/planing machine. Year of manufacture 2009/2010 Type Caster IPC 6.000. Only in use for a very short time. Very well preserved, almost new machine with all engines and accessories for the production of up to max. 6 to/h of sanding wood. System complete with Siemens S 7 control, grinding equipment and grinder type Grinder SL 800 and all planer heads, along with a set of spare cutter heads. Extraction system and complete conveyor technology for chip transport. Machine professionally dismantled, ready for takeover immediately. Warehouse location in southern Germany. Viewing is possible at any time. /

Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60

Newtec 9 heads weigher with PCS system, also available with funnel

PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Fully automatic production line for the manufacture of FFP2 dust masks (KN95). Stable and efficient production of single-use dusk masks with FFP2 protection class (KN95) and made of 4-5 layers of material. Production procedure: Material feeding from roll (up to 5 layers) | feeding, cutting and ultrasonic welding of the nose-bridge | ultrasonic welding of the ear strap | folding and shaping of the mask | ultrasonic welding of the mask edges | punching (separating) and ejection. The tension of the feed materials can be controlled separately for each material. By changing the templates, masks of different sizes and styles can be produced. Controlled by Mitsubishi PLC, operation via Weinview touch screen. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | power: 8kW, 220V | machine dimensions L6000xW1000xH1800mm | weight: 1500kg. Video on YouTube:

Inv. Num. : 8440 Type:- Producer:- Generated: Parameters: Capacity: 400 1/min Components: Mixer Dump truck 3 bowls Press Gas oven Machine

Used Masa Stone Making Line Year of Make: 2001 Consisting of: - Mixing plant - Colormix - Kübelbahn - Stone paver - approx. 3600 production boards 1400x1100mm - Aerial ladder with 22 shelves - Transfer table - Countersunk ladder - Packager - Brettpuff The drying chamber is not for sale Second-hand Masa block-making plant Year of manufacture: 2001 Consisting of: - Mixing plant - Colormix - Bucket conveyor - Block-making machine - Approximately 3,600 production boards, 1,400 x 1,100 mm - Elevator with 22 levels - Sliding platform / Finger car - Descending conveyor / Lowerator - Packager - Board buffer The drying chamber is not for sale

Stone Production Plant Year of Make: 1989 Board pavers from the manufacturer OMAG Simatic S 5 control system with visualization by Frima Board size 1,400 x 1,000 mm Cross cleaning Quick Forming Clamping Pneumatic Drawing plate equipment Circulation Hydraulic pawl feed with proportional valveson wet side Dumping device Lifting ladder with chain transport, 18 shelves and double pusher and collector Vehicle Group Countersunk ladder with 18 levels double joint Hydraulic Stone Remover Hydraulic Stone Doppler Chain conveyor at sorting station and pawl feed at dry side conveyor Film applicator Horizontal strapping Granule spreader Electric Packager Board cleaning brush in V-belt conveyor Board turner Board stacking device for stacking board package transport incl. board buffer; Pre board destacker buffer for 75 boards Board destacking device Board insertion wi ...

available is a complete Plant with Equipment to produce Airspring! 3 Roll Calender with line and 84" Twin Mill Bias Cutter Several Building machine several hydraulic Curing presses testing machine 3 x assembly lines Winder ...

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Complete professional oil mill & filling line incl. labelling technology, raw materials & bottle storage – turnkey For sale is a complete, professional production and bottling plant for cold-pressed edible and specialty oils. Ideal for farmers, direct marketers, founders or existing farms who want to set up or expand their own oil production. The package is perfectly matched to each other and enables immediate production to start from seed to the finished labeled end product. 1. Machinery & Production Technology - NF 500 oil press with infinitely variable speed control (year of manufacture 2020). Manufacturer: Nature Fuel Osnabrücker Ölmühle GmbH & Co. KG - Chamber filter press KKF200/10-2 (built in 2025, as good as new). Manufacturer: Oil press GmbH & Co. KG - Pneumatic oil filling machine (100 ml – 1000 ml) - Stainless steel container 590 liters with l ...

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - .ucymachines/

Used concrete block, pavers production plant Brand: ERMAK Country of Origin: Türkiye Model: 8 X 8 QUATRO Year: 2021 Scope of Supply • Main press (single-layer machine, servo-driven) • Pallet dimensions: 1,400 x 1,150 x 50 mm • Cycle time: 15 seconds • Finger car • Buffer rack • Elevator – de-stacker unit (dry and wet towers) • Dry-side pallet conveyor • Stone centering robot • Product collection robot • Omega product discharge conveyor • ZENO horizontal and vertical PET strapping machines • Integrated shot-blasting machine and feeder (servo-driven) • Transverse conveyor • Pallet storage system (conveyor and robot) • Machine infeed conveyor Additional Equipment • ColorMix • Double washing machine Excluded from the Scope of Supply • Pallets (production boards) • Curing chamber racks • Moulds • Batching plant (mixers ...

Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.

Chlordioxyd elektrytical plant for bewerage industry.

Qty. 1 Second-hand paper production plant – PM5 Mfc.: PAMA line with Voith and Valmet systems Built: 1985 Stopped: 1/2026 Modernised: 1994–2025 Trimmed width: 2,640 mm Speed: 600 m/min Gross capacity: 150 t/day Basis weight: 45 – 130 g/m² Working width: 2,730 mm Paper grades: Office, copy, writing, printing, envelope and newsprint Installed electrical power: approx. 2.5 MW Steam consumption: up to approx. 16 t/h 01 Approach flow system Mfc.: PAMA 02 Headbox Mfc.: Voith 03 Fourdrinier section Mfc.: PAMA 04 Top-wire former Mfc.: Valmet 05 Press section 06 Dryer sections Mfc.: PAMA 07 SpeedFlow system Mfc.: Voith 08 After-dryer section Mfc.: PAMA 09 Calender 10 Pope reel Mfc.: PAMA Modernisations Valmet top-wire former installed / retrofitted in 1994 Approach-flow system expanded and modernised in 2002–03 MAP quality-control system installed / ...

Fully automatic production line for the manufacture of surgical masks. Stable and efficient production of single-use surgical masks made of 3-4 layers of material. After welding the layers on top of each other, the production for welding the ear straps is expanded to 2 lines to achieve a constant high output. PLC control, operation via touch screen. - Specifications: max. speed of the machine in neutral: 65 cycles/minute (corresponds to 130 masks/minute) | mask dimensions: L175xW95mm | power: 9kW, 220V | machine dimensions L6500xW4500xH1900mm | weight: 1800kg. Video on YouTube:

In flight case Auction-ID: A1-50476-113

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.

\" Drywall Profile Roll Forming Production Line with TP-501 Strapping Machine Equipment type: Drywall Profile Roll Forming Line Quantity: 1 production line Condition: Used, visually good Industrial roll-forming production line designed for manufacturing sheet-metal profiles used in drywall partitions, suspended ceilings and related construction applications. The line comprises a decoiler, multi-station roll-forming section, cutting system, control equipment and output handling section. Technical specifications: Decoiler capacity: 2,000 kg Maximum sheet width: 300 mm Coil internal diameter: 480–750 mm Sheet thickness: 0.3–2.0 mm Production speed: 20 m/min Longitudinal cutoff tolerance: ±1 mm Power input: 8.5–10.5 kW Forming stations: 6–20 Working shaft diameter: 45–55 mm Power transmission: Chain system Cutting system: Hydraulic shear or circular saw Co ...

General Description Semi-automatic industrial pastry / dough sheet production line designed for continuous production of thin pastry sheets, including phyllo/filo dough, burek pastry and similar products. The line features predominantly stainless-steel construction with integrated dough forming, rolling and conveyor systems. Technical Details Machine type: Pastry / dough sheet production line Production capacity: Approx. 850 kg per 8-hour shift Average throughput: Approx. 106 kg/h Labour requirement: Approx. 2 operators, excluding packaging Stainless-steel industrial construction Dough feed hopper Continuous conveyor/belt system Multiple forming and thinning rollers Rotary forming/cutting components Electrical/local control system Packaging equipment included Condition Used industrial condition. The line appears substantially complete with feed, conveyor, roller and f ...

Complete beer production and packaging plant available for sale following the closure of an industrial brewery. An excellent opportunity to acquire a comprehensive brewery installation covering the main stages of beer production, fermentation, storage, refrigeration and packaging. Main equipment included: Robix Hungary Kft. ROPPI-1100 - 2-roller malt mill Eco Brew Tech Tino Cottura + Tino Filtro - Automatic brewhouse - 2014 Thermindus GV Insieme - Electric steam generator - 2014 Eco Brew Tech Fermenter 2,731 L - Fermentation and maturation Unitanks - 2014 - 3 units Eco Brew Tech 2,200 L - Mixing tank with agitator - 2014 Céspedes / Idrotecnica S.r.l. - Automatic filling and capping monoblock - 2014 Céspedes S2/Z - Automatic labelling machine - 2014 Keyter KWF Series - Industrial glycol chiller - 2018 The installation also comprises additional stainless steel tanks, proce ...

Used, concrete block, pavers production plant Brand: Quadra Model: Q6 PR6 Year: 2004 Second Layer Concrete unit Multiforks 12 levels, fork spacing 40 cm Drying cells galvanized metal shelving system 14 tunnels, 24 rows, total capacity for 3.744 filled production boards Production board size 1400 x 700 x 50 mm Number of production boards: 1.800 pieces Moulds: Curbs and paving stones (Rampf, Kobra and spanish local brands), about 40 varieties Color mix (4 colors) Pallet humidifier (spray) 2 shelves for the storage of the moulds Palletizing Spare parts for machine and palletizing

Multiweigh 20 heads weigher, - With horizontal vibratory feeders for fast products like frozen food or sweets/ nuts., - 20 heads, - Fully stainless steel rigidized material to prevent sticking., - With collection bucket for a faster more controllable workflow

General Description Automatic bun making line manufactured by Fortuna , designed for the production of Kaiser rolls and similar bakery products. The modular line consists of a dough divider, dough rounder, intermediate proofer, and conveyor sections, providing automated dividing, rounding, proofing, and conveying of dough pieces with a product weight of up to 120 g . The exact model could not be identified from the available photographs. Technical Details Manufacturer: Fortuna Model: Not visible Machine type: Automatic bun making line Configuration:   - Dough divider   - Dough rounder   - Intermediate proofer (vertical chain type)   - Conveyor sections Product: Kaiser rolls and similar buns Maximum dough piece weight: Up to 120 g Condition: Used Condition Overall good used industrial condition. Stainless steel food-contact surfa ...

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and man ...

A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1 ...