136,111 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020
The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.
The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.
Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at ...
KAS autocreaser 50, in production ready condition, with 2 creasing tools and perforation wheels integrated. In production ready condition available immediately. Can ship worldwide.
Key data: 450 mm, 600 mm, 330 mm
Manufacturer: Hermle Model: C 22 U Year: 2018 Condition: Used Stock number: 8975 Control system: Heidenhain TNC 640 Switch-on hours: 23,000 h Number of axles: 5 pieces X-axis travel: 450 mm Y-axis travel: 600 mm Travel travel Z-axis: 330 mm Speed: 18000 1/min Cone: HSK-A63 IKZ: 80 bar Tool holders Internal air supply through the spindle Left scraper conveyor Blower device Additional hopper ZM192 Coolant mist extraction Blowing air through the center of the spindle Rinsing gun Blum calipers Blum Tool Gauge LC50 TL200 Equipment: Chip conveyor Rotary table (320 mm)
Key data: 1000 mm, 800 mm, 500 mm
Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg
The machine has been maintained well, bought in 2021. Located in Estonia, Harju. Video available.
x-axis: 2200 mm y-axis: 1700 mm z-axis: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function ...
: 0760 mm : 430 mm : 460 mm : 900x410 mm : SK 40 : 8.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 420 mm, 380 mm
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions
This 3-axis SCM Morbidelli M220 CNC machining centre was manufactured in 2019. It features a working area of 5,510 x 1,620 x 180 mm and a powerful 15 kW liquid-cooled HSK 63F electrospindle with speeds up to 24,000 rpm. The machine includes a F29LTC drilling head with 17 vertical and 6 horizontal drilling units, as well as a high-performance vacuum clamping system. If you are looking to get high-quality machining capabilities, consider the SCM Morbidelli M220 machine we have for sale. Contact us for further details.
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm B - axis: -120 / + 30 ° NC- swivellable rotary table - Ø: 700 mm control: iTNC530 Heidenhain number of spindle speeds: 10.000 1/min spindle taper: SK 40 DIN 69871 max. torque at 40% / 100% load: 28 / 19 kW tool change unit: 2 x 16 Pos. table-size: 1250 x 700 mm table load capacity: 650 kp total power requirement: 44 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,50 x 3,20 x 2,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 1050 mm z-travel: 850 mm control: Siemens 840D Celos Main spindle:: power capacity - main spindel: 35/25 kW Speed Mainspindle: 18000 min/-1 max. Torque: 288 Nm tool taper: HSK 63 Swivel range: -30/+180 ° work table:: table surface area: dia. 800 mm max. table load: 1800 kg 0: dia 950 x 1450 mm c-axis: 360 x 0,001 ° Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 120 mm max. size of tooling: 550 mm max. tool weight: 15 kg feeds:: rapid traverse ( X / Y / Z ): 60 m/min capacity: - kVA weight of the machine ca.: 15 t dimensions of the machine ca.: 4,47 x 2,35 x 3,2 m 5 Axis Machining Center - Universal - CNC Control Siemens 840D Celos - Automatic Swivel Milling Head wit B-Axis - ATC 30-fold (HSK 63) - Coolant with Paperbandfilter & IKZ 20 bar - Chip Conveyor - Probe The data for this ad was created with ModulMWS - the software solutio ...
Press force max.:: 10.000 kN heating plates:: 1200 x 1200 mm electrically heated:: °C piston stroke:: ca. 700 mm no. of stages:: 1 Condition: Second-hand, reconditioned Specification: Vulcanising press 1200 x 1200 mm, steel plate construction, second-hand, reconditioned - Clamping force approx.: 1,000 t - Clamping action: bottom-up - Heating plates: 2 electric plates - Heating plate power approx.: 2 x 25 kW - Heating plate dimensions: 1,200 x 1,200 mm - Distance between the heating plates, variant 1: approx. 1,100 mm - Distance between the heating plates, variant 2: approx. 1,500 mm - Piston stroke approx.: 700 mm - Hydraulic power unit with new solenoid valves - AC motor for pump approx.: 30 kW to be checked during overhaul - New control cabinet with 7 Siemens touch panel - Siemens S7-1200 PLC system - Frequency converter for ...
The machine is in good technical condition; it can be tested by prior arrangement.
4 BAZ Heller 3 x BAZ Heller H5000 BJ 2019 and 2021 1 x BAZ Heller MCH 250 BJ 2001/2009
Key data: 850 mm, 520 mm, 475 mm
CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions
x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: 810 D 3D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 8.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: rapid traverse: 25 m/min total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Chip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours ...
x-travel: 762 mm y-travel: 508 mm z-travel: 610 mm control: MAX5 Hurco distance spindle nose and table: 152 - 762 mm Main spindle:: speed mainspindle max.: 12.000 U/min power capacity - main spindel: 13,4 kW max. Torque: 214 Nm tool taper: SK 40 DIN 69871 A work table:: table surface area: 1.020 x 510 mm max. table load: 1.500 kg T-slots: 5 x 18 x 100 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: SK 40 tool diameter: max. 80 / 76 mm tool length - max.: 300 mm weight of tools max.: 7 kg feeds:: rapid traverse X-axis: 38 m/min rapid traverse Y-axis: 38 m/min rapid traverse Z-axis: 32 m/min total power requirement: 24 kVA weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,0 x 4,1 x 2,8 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 20 bar through spindle coolant: Coolant through spindle: Signal-Light: Oil Skimmer: test probe: R ...
Manufacturer: HAAS Model: EC 400 4AX HE Year: 2006 Condition: Used Stock number: 9566 Maximum pallet load: 300 kg Maximum spindle speed: 12000 1/min X-axis travel: 508 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm
The machine is in good technical condition; it can be tested by prior arrangement.
Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Mitre adjustable left + right up to 30° - Cutting range at 90° round + square 140 mm - Rectangle 210 x 120 mm - at 45° round + square 120 mm - at 30° round + square 105 mm - Cutting speeds infinitely adjustable 10 to 80 m/min - Feed speed of the saw blade hydr. infinitely variable - Pneumatic vise / vice - Coolant device + micro spray system - Discharge roller conveyor with dimension stop 3000 mm - Roller conveyor feed 3000 mm - Pneumatic connection 6 bar - Drive 400 V / 4.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 1000 kg
x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Infrared measuring device: Machine with only 3.311 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler Infrared measuring device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
• Deckel Maho DMC 63V; Year: 2001; 8200 spindle hours; Very good condition, freshly checked and ready for shipment • DMG DMC 635 V ecoline; Year: 2013; approx. 2800 spindle hours; Very good condition immediately available • Mazak QT 200 MSY built in 2024; Spindle hours: approx. 500h
Manufacturer: SW Model No.: BA W04-22 Year: 2014 Condition: Used Stock number: 9603 Control system: Sinumerik 840D Solution Line Number of stacking positions: 2x36 Minimum spindle speed: 5000 1/min X-axis travel: 400 mm Y-axis travel: 500 mm Z-axis travel: 425 mm Cone: HSK 63 Number of Spindles: 2 Equipment: Chip conveyor Filtration Knoll Preparation for 5 axis
Key data: 406 mm, 305 mm, 254 mm
CNC Vertical - Machining Center HAAS MINIMILL With path control HAAS Year of Make: 2006 Travels: X 406 Y 305 Z 254 Speed range: 30 – 6,000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 730 mm x 300 mm clamping surface Vertical tool changer with 10 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Pushbutton Renishaw OMP 40 ( 2021 installed ) Tool breakage detection Renishaw TS 27 R ( installed in 2021 ) NC Branch HAAS BJ. 2021 Coolant Setup 4 pcs machine shoes Operating Instructions
TECHNICAL DATA Materials: • PE • PP • Extra Cut • Thermo • Clear and Clear • PET • Suitable for blank materials • Suitable for pre-printed materials with register marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Centre dancer • Webbing-up mode for web threading • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min
Key data: 1400 mm, 700 mm, 700 mm
Manufacturer: Victor Model No.: Vcenter-140 Year: 2001 Condition: Used Stock number: 9605 Control system: HEIDENHAIN TNC 430 Work table length: 1650 mm Work table width: 650 mm X-axis travel: 1400 mm Y-axis travel: 700 mm Travel Z axis: 700 mm
Key data: 1040 mm, 600 mm, 500 mm
CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions
BAZ DMG Deckel V75linear (ca.16000 spindle hours) BJ 2005
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50796-117
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50796-217
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50796-17
x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm Control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 9,4 t dimensions of the machine ca.: m Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 560 mm, 560 mm, 600 mm
Manufacturer: Makino Model No.: A51 Year: 2006 Condition: Used Stock number: 9612 Work table length: 400 mm Work table width: 400 mm Maximum spindle speed: 12000 1/min X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Number of Stacking Positions: 134 pieces Machine weight: 7804 kg
Manufacturer/ Type: Deckel Maho, DMU 60 P hi-dyn, 5 Axis Milling Machine Year of Make: 2002 Information: Tool changer for 60 SK 40 holders, Mill Plus control, Current condition: The Y axis is out of round by 0.03mm, the machine is not working at the moment because the hard drive has to be replaced Availability: Immediately Accessories: 3D probe, machine manual
Key data: 640 mm, 600 mm, 500 mm
Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions
The machine is in good technical condition; testing is possible by prior arrangement. Control system: Mazatrol MATRIX 2. Table clamping surface: 1300 × 550 mm. X-axis travel: 1050 mm. Y-axis travel: 530 mm. Z-axis travel: 510 mm. Spindle speed: 10 – 12,000 rpm. Number of controlled axes: 3. Through-spindle coolant: Yes. Coolant pressure: 15 bar. Spindle taper: ISO 40. Max. table load: 1200 kg. Tool magazine: Yes. Number of magazine positions: 30. Number of pallets: 2. Machine weight: 7700 kg. Coolant enclosure (required for chip evacuation). Rear chip conveyor outlet (left and right). Preparation for optical probe (MMS-B OMP60). Automatic tool length measurement and breakage detection. Automatic pre-drilling cycle with load detection. Synchronized tapping. 2-pallet changer with safety enclosure. Preparation for high-pressure coolant. Renishaw OMP 60 probe. Renishaw CAT 40 tool shank. ...
Used PRO-PAK small dairy processing line 2000 LPHTechnical Specifications & Performance DataThis used bottling line is a complete dairy processing and industrial packaging installation designed for milk, yogurt, cheese, cream and cream-based food production. Manufactured by PRO-PAK, the installation combines milk reception, pasteurization, separation, fermentation, cheese processing, packaging, utilities and laboratory equipment.Milk processing capacity: 2000 L/hPotential daily processing capacity: 15000 L of milk per day with additional vesselsPasteurizer capacity: 2000 L/hWestfalia separator capacity: 3000 L/hMilk packaging format: 1.0L bagsYogurt cup diameters: 75 mm and 95 mmAutomatic yogurt packer output: 1800 cups/hInstalled electrical power: 18 kWAdvanced Automation & Control SystemsThe line includes automatic and semi-automatic packaging equipment for dairy production. Pasteurize ...
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1020 mm y-travel: 700 mm z-travel: 500 mm control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1060 mm y-travel: 520 mm z-travel: 610 mm control: Siemens total power requirement: kW weight of the machine ca.: 5900 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1600 mm y-travel: 820 mm z-travel: 700 mm control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50799-117
maximum number of results exceeded
please refine your search
29 € 
