processing line used for sale

Key data: 1600 mm, 1200 mm, 800 mm

Manufacturer: Trimill Model No.: HF 1612 Year: 2004 Condition: Used Stock number: 9519 Control system: SIEMENS Sinumerik 840 Work table length: 1600 mm Work table width: 1600 mm Maximum table load (uniform): 20000 kg X-axis travel: 1600 mm Y-axis travel: 1200 mm Z-axis travel: 800 mm Machine height: 3749 mm Machine length: 8335 mm Machine width: 7070 mm Machine weight: 48300 kg

x-travel: 1100 mm y-travel: 610 mm z-travel: 610 mm control: Heidenhain 530 total power requirement: kW weight of the machine ca.: 7800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 mm, 550 mm, 510 mm

CNC Vertical Machining Center "DECKEL MAHO M 1" With rail control Siemens 828 D Shop Mill Year of construction: 2022 Commissioning: 9/2023 Travel: X 550 Y 550 Z 510 Speed range: 20 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) IKZ 20 bar Electronic handwheel 3 D Probe Renishaw PP 40 Tool Length Measurement Renishaw TS27R Full protection cabin with sliding doors and interior lighting Coolant Setup Chip conveyor Oil mist extraction Coolant spray gun 3 Height Adjustable Machine Shoes Operating Instructions THE MACHINE IS IN TOP CONDITION!

Manufacturer: Elumatec Model: SBZ 130 Year: 2007 Condition: Used Stock number: 9523 Max. machining length: 6500 mm Spindle drive power: 5.5 kW Maximum spindle speed: 6000 1/min Number of axes: 3 Maximum feed in the X-axis: 34 m/min Maximum feed rate in the Y-axis: 18 m/min Maximum feed rate in the Z-axis: 18 m/min Tool magazine capacity: 8 Machine weight: 5500 kg

Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details.

X-axis 1000 mm Y-axis 900 mm Z-axis 1000 mm Max. workpiece Ø Iecoz Df Sus Ehgzvnebb 1000 mm Max. workpiece height 1000 mm Max. spindle speed: 6000 rpm Tool magazine with 60 tool positions BT50 Big Plus Machine with only 500 spindle hours. New condition.

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

# HP Jet Fusion 5200 – Produktionsbereites MJF-System mit vollständiger Peripherie Zum Verkauf steht eine HP Jet Fusion 5200 aus dem Jahr 2019, eine industrielle 3D-Druckanlage auf Basis der MJF -Technologie für die wirtschaftliche Serienfertigung von Kunststoffbauteilen. Die Anlage wurde im August 2020 in Betrieb genommen und verfügt über ca. 5.100 Betriebsstunden. Ein aktiver Wartungsvertrag läuft bis 20.01.2026. Lieferumfang HP Jet Fusion 5200 Druckeinheit Post Processing Station für Pulverentfernung und -aufbereitung 2 Build Units (parallele Produktion, reduzierte Stillstandzeiten) 2 Pulverfässer Transportstapler für Build Units und Materialhandling Technische Spezifikation Bauraum: 380 × 284 × 380 mm Schichtdicke: ca. 80 µm Materialien: PA12, PA12 GB, PA11 (je nach Konfiguration) Pulvermanagement: Automatisiert über Post Processing Station Betriebsart: Industrieller Da ...

• Incl. left roller conveyor • Roller conveyor width: 240 mm

Attention: the machine can be transported on a truck up to 3000 mm wide! Incl. the tool holders located in the tool changer. Additional technical specifications: • Setup mode X/Y/Z: 20 - 2000 mm/min • Position measuring system X/Y/Z: 0.001 mm • with in total 32-tool changer (2 x 16 places) • Max. tool diameter with fully places magazine 1: 130 mm • Max. tool diameter with fully places magazine 2: 80 mm • max. tool weight at automatic tool changing: 8 kg • Max. total tool weight in magazine: 160 kg • NC rotary table built into the rigid table. • Number of T-slots: 14/H 12 mm • Aligning slot/one: 14/H 7 mm • T-slot spacing: 63 mm • Permissible load of work tables: Rotary table: 500 kg

Additional technical specifications: • Digital display: available • Roller conveyor: available • Roller conveyor length: approx. 3000 mm

Incl. 60-fold tool changer, NC rotary table with swivel axis, incl. three-jaw chuck, jaw width: 250 mm, incl. tool holders located in the tool changer, incl. chip conveyor and coolant unit Attention: The machine can be transported on a standard truck! Additional technical specifications: • Measuring system resolution X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • Max. tool length from spindle nose: 280 mm • Max. tool weight for automatic tool change: 6 kg • T-slot spacing: 63 mm 14 H 7 • Center bore: 30 mm • Swiveling speed: 26 rpm • Input and display unit: 0.001° Note: No guarantee can be given regarding the current runout or machining accuracy of the machine. We have received information indicating a possible deviation in the area of the tool holder or clamping system. An appropriate inspection is recommended.

incl. NC rotary table, with 9 slots, incl. the tool holders located in the tool changer as well as chip conveyor and coolant unit Attention: the machine can be transported on a standard truck. Attention: the vices visible in the photos are not included in the scope of delivery! Additional technical specifications: • nominal current: 80 A

Incl. 60-fold tool changer, NC rotary table, incl. tool holders located in the tool changer, incl. chip conveyor and coolant system. Attention: without the machine vise shown in the photos! Additional technical specifications: • nominal current: 100 A • Path measuring system resolution: 0,001 mm • Input resolution in X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • max. tool diameter with free adjacent places: 160 mm • tool length from spindle nose without tool breakage monitoring: 350 mm • with tool breakage monitoring: 315 mm • max. tool weight at automatic tool change: 10 kg • max. total tool weight in magazine: 200 kg • Distance of T-slots: 63 mm • Number of T-slots: 9/14 pcs • Center bore: 50 mm • max. rotation of the table top: 20 rpm • Feed: 3600°/min • Resolution of the measuring system: 0.001°

Attention: the hydraulic clamping systems visible in the photos are not included in the scope of delivery! Attention: the machine can be transported on a standard truck! Additional technical specifications: • Year of manufacture: presumably 2006 • Slots: 9 pieces • Swivel head: 360° • incl. protective enclosure

Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V

Incl. NC rotary table, also a simple pallet changer system, incl. the SK 40 tool holders located in the changer as well as chip conveyor and coolant unit. Attention: the machine can be transported on a standard truck! Additional technical specifications: • nominal current: 80 A • Distance between clamping holes: 100 mm • Number of clamping holes: 33 mm • Center bore: 50 mm • Max. rotation of the table top: 13.6 rpm • Feed: 3600°/min

• Incl. roller conveyor on the left • Roller conveyor width: 400 mm

Management Heidenhain MillPlus IT Travel distances X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l Paper Belt Filter rotating viewing panel Chip conveyor

MIKRON UCP 600 ist ein Vertikal Bearbeitungszenter, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. 5 Achsen für 5-Seiten-Bearbeitung; Rundtisch Ø400 mm; Verfahrwege X 600 mm, Y 450 mm, Z 450 mm; Tischbelastung 400 kg; B-Achse -115/+30°; C-Achse 360°. Werkzeugwechsler TC 30; Spindel stufenlos 50–20.000 t/min; Spindelmotor 5,5 kW; Gesamtbedarf 18 kW; Vorschub 22 mm/min; Eilgang 22 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~6500 kg; Abmessungen 2500×1600×2650 mm; Schallpegel 75 dB(A). Ausstattung: Kühlmitteleinrichtung, elektronisches Handbedienpult, elektronisches Handrad. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - DMU 75 MONOBLOCK WAREHOUSE NO - ONY100000591 YEAR OF MANUFACTURE - 2014 CONTROL UNIT - HEIDENHAIN iTNC 530 HSCI AXIS TRAVELS - X 750 mm / H 650 mm / Z 560 MM ROTARY AXIS MOVEMENTS - A +120° / -120° / C 360° SPINDEL CYCLE 18.000 RPM HOLDER TYPE - SK 40 NUMBER OF TEAMS - 60 TABLE SIZE - 800 × 650 mm (d 650 MM ) WORKPIECE WEIGHT (MAX) - 600 kg MACHINE WEIGHT - 11.600 kg MACHINE EXTERIOR DIMENSIONS - 310 × 245 × 285 cm

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - NT 5400/1800 SZ DCG WAREHOUSE NO - ONY100000580 YEAR OF MANUFACTURE - 2007 CONTROL UNIT - MSX-701 III AXIS TRAVELS - X1 1,040 MM / X2 267 MM / H ± 255 MM / Z1 1,940 MM / Z2 1,830 MM ROTARY AXIS MOVEMENTS - B ±120° / C 360° MAX. TURNING DIAMETER - 920 MM MAX TURNING DIAMETER - 470 MM MAX TURNING LENGTH - 1.921 MM SPINDLE - 1 SPINDLE SPEED - 2,400 MIN/-1 MIRROR SIZE - 450 MM ROD DIAMETER - 107 MM MAIN SPINDLE SPEED (S1) - 8,000 MIN/-1 HOLDER TYPE - CAPTO C8 SPINDLE - 2 COUNTER MIRROR REVOLUTION - 2,400 MIN/-1 MIRROR SIZE - 450 MM TURRET-2 NUMBER OF HOLDERS - 10 MACHINE WEIGHT - 36.000 KG MACHINE EXTERNAL DIMENSIONS - 4.50 X 6.61 X 3.46 M

Key data: 800 mm, 500 mm, 540 mm

CNC Vertical Machining Center MIKRON VCE 800 W Pro With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 500 Z 540 Speed range: 30 – 10,000 rpm continuously variable ( SK 40 ) With the following accessories: Rigid angle table 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Direct displacement measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip rinsing gun Signal lamp Spiral Screw Conveyor Coolant Setup Operating Instructions

The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020

The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.

The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.

Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at  ...

KAS autocreaser 50, in production ready condition, with 2 creasing tools and perforation wheels integrated. In production ready condition available immediately. Can ship worldwide.

Key data: 450 mm, 600 mm, 330 mm

Manufacturer: Hermle Model: C 22 U Year: 2018 Condition: Used Stock number: 8975 Control system: Heidenhain TNC 640 Switch-on hours: 23,000 h Number of axles: 5 pieces X-axis travel: 450 mm Y-axis travel: 600 mm Travel travel Z-axis: 330 mm Speed: 18000 1/min Cone: HSK-A63 IKZ: 80 bar Tool holders Internal air supply through the spindle Left scraper conveyor Blower device Additional hopper ZM192 Coolant mist extraction Blowing air through the center of the spindle Rinsing gun Blum calipers Blum Tool Gauge LC50 TL200 Equipment: Chip conveyor Rotary table (320 mm)

Key data: 1000 mm, 800 mm, 500 mm

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

The machine has been maintained well, bought in 2021. Located in Estonia, Harju. Video available.

x-axis: 2200 mm y-axis: 1700 mm z-axis: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function  ...

: 0760 mm : 430 mm : 460 mm : 900x410 mm : SK 40 : 8.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 420 mm, 380 mm

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions

This 3-axis SCM Morbidelli M220 CNC machining centre was manufactured in 2019. It features a working area of 5,510 x 1,620 x 180 mm and a powerful 15 kW liquid-cooled HSK 63F electrospindle with speeds up to 24,000 rpm. The machine includes a F29LTC drilling head with 17 vertical and 6 horizontal drilling units, as well as a high-performance vacuum clamping system. If you are looking to get high-quality machining capabilities, consider the SCM Morbidelli M220 machine we have for sale. Contact us for further details.

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm B - axis: -120 / + 30 ° NC- swivellable rotary table - Ø: 700 mm control: iTNC530 Heidenhain number of spindle speeds: 10.000 1/min spindle taper: SK 40 DIN 69871 max. torque at 40% / 100% load: 28 / 19 kW tool change unit: 2 x 16 Pos. table-size: 1250 x 700 mm table load capacity: 650 kp total power requirement: 44 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,50 x 3,20 x 2,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 1050 mm z-travel: 850 mm control: Siemens 840D Celos Main spindle:: power capacity - main spindel: 35/25 kW Speed Mainspindle: 18000 min/-1 max. Torque: 288 Nm tool taper: HSK 63 Swivel range: -30/+180 ° work table:: table surface area: dia. 800 mm max. table load: 1800 kg 0: dia 950 x 1450 mm c-axis: 360 x 0,001 ° Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 120 mm max. size of tooling: 550 mm max. tool weight: 15 kg feeds:: rapid traverse ( X / Y / Z ): 60 m/min capacity: - kVA weight of the machine ca.: 15 t dimensions of the machine ca.: 4,47 x 2,35 x 3,2 m 5 Axis Machining Center - Universal - CNC Control Siemens 840D Celos - Automatic Swivel Milling Head wit B-Axis - ATC 30-fold (HSK 63) - Coolant with Paperbandfilter & IKZ 20 bar - Chip Conveyor - Probe The data for this ad was created with ModulMWS - the software solutio ...

Press force max.:: 10.000 kN heating plates:: 1200 x 1200 mm electrically heated:: °C piston stroke:: ca. 700 mm no. of stages:: 1 Condition: Second-hand, reconditioned Specification: Vulcanising press 1200 x 1200 mm, steel plate construction, second-hand, reconditioned - Clamping force approx.: 1,000 t - Clamping action: bottom-up - Heating plates: 2 electric plates - Heating plate power approx.: 2 x 25 kW - Heating plate dimensions: 1,200 x 1,200 mm - Distance between the heating plates, variant 1: approx. 1,100 mm - Distance between the heating plates, variant 2: approx. 1,500 mm - Piston stroke approx.: 700 mm - Hydraulic power unit with new solenoid valves - AC motor for pump approx.: 30 kW to be checked during overhaul - New control cabinet with 7 Siemens touch panel - Siemens S7-1200 PLC system - Frequency converter for ...

The machine is in good technical condition; it can be tested by prior arrangement.

4 BAZ Heller 3 x BAZ Heller H5000 BJ 2019 and 2021 1 x BAZ Heller MCH 250 BJ 2001/2009

BAZ BVL DSF 800-2T BJ 2015

Key data: 850 mm, 520 mm, 475 mm

CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: 810 D 3D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 8.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: rapid traverse: 25 m/min total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Chip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours  ...

BAZ DMG Lasertec 65s BJ 2014

x-travel: 762 mm y-travel: 508 mm z-travel: 610 mm control: MAX5 Hurco distance spindle nose and table: 152 - 762 mm Main spindle:: speed mainspindle max.: 12.000 U/min power capacity - main spindel: 13,4 kW max. Torque: 214 Nm tool taper: SK 40 DIN 69871 A work table:: table surface area: 1.020 x 510 mm max. table load: 1.500 kg T-slots: 5 x 18 x 100 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: SK 40 tool diameter: max. 80 / 76 mm tool length - max.: 300 mm weight of tools max.: 7 kg feeds:: rapid traverse X-axis: 38 m/min rapid traverse Y-axis: 38 m/min rapid traverse Z-axis: 32 m/min total power requirement: 24 kVA weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,0 x 4,1 x 2,8 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 20 bar through spindle coolant: Coolant through spindle: Signal-Light: Oil Skimmer: test probe: R ...

The machine is in good technical condition; it can be tested by prior arrangement.

Manufacturer: HAAS Model: EC 400 4AX HE Year: 2006 Condition: Used Stock number: 9566 Maximum pallet load: 300 kg Maximum spindle speed: 12000 1/min X-axis travel: 508 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm

Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Mitre adjustable left + right up to 30° - Cutting range at 90° round + square 140 mm - Rectangle 210 x 120 mm - at 45° round + square 120 mm - at 30° round + square 105 mm - Cutting speeds infinitely adjustable 10 to 80 m/min - Feed speed of the saw blade hydr. infinitely variable - Pneumatic vise / vice - Coolant device + micro spray system - Discharge roller conveyor with dimension stop 3000 mm - Roller conveyor feed 3000 mm - Pneumatic connection 6 bar - Drive 400 V / 4.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 1000 kg

x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Infrared measuring device: Machine with only 3.311 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler Infrared measuring device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.