136,647 used machines on RESALE, but how to find them? Machine Search
A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/ ...
The line consists of one Juki KE-2070 pick-and-place machine, one Juki KE-2080 pick-and-place machine, one Juki RS-800 reflow soldering oven and a cooling unit (chiller), 1) Juki KE-2070 pick-and-place machine, permissible component height SC: 6mm, NC: 12mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 2) Juki KE-2080 pick-and-place machine, permissible component height NC: 12mm, HC: 20mm, EC: 25mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 3) Juki RS-800 8-zone reflow soldering oven, number of heating zones: top 8, bottom 8, heating zone length: 3121mm, number of cooling zones: top 2, cooling zone length: 800mm, exhaust air ...
The line consists of one Juki KE-3020L pick-and-place machine, one Juki FX-3 pick-and-place machine, one Kurtz Ersa HOTFLOW 2/12 reflow soldering oven and one Kurtz Ersa stencil printer, 1) Juki KE-3020L pick-and-place machine, 2) Juki FX-3 pick-and-place machine, placement speed - optimum: 0.049s/chip (74,000CPH), placement speed - IPC9850: 60,000CPH, component size: 0402 (01005) to 33.5mm (or diagonal length up to 47mm), placement accuracy: +/-0.05mm (Cpk ≥ 1), max. feeder inputs: 120 with 8mm tape feeders, max. PCB size: 50-410x50-360mm, length: 1650mm, width: 2650mm, height: 1530mm, weight: 3.28t, 3) Kurtz Ersa HOTFLOW 2/12 reflow soldering oven, conveyor system working width: 50-500mm, working width with PCB center support: 60-500mm, PCB clearance: +35/-20mm, conveyor speed: 20-200cm/min, conveyor height above floor: 820-950mm, pin and chain conveyor: 5mm edge clearance, cooling z ...
Complete Knapp Fastline System RA2519 ________________________________________ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. ________________________________________ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0 ...
Capacity … Vials DIN ISO : 2R ø16x35mm, 6R ø22x40mm and 10R ø24x45mm Line set performance output 24.000 / 21.600 / 20.100 pcs/h Consisting of: 1x Heatsystems Electric process heater with Pallas UV treatment unit 1x stainless steel Rotary pharmaceutical vial washing machine model RRN 3085, s/n 759606 1x stainless steel pharmaceutical hot-air sterilizing tunnel model HQL 8120 S, s/n 759607 1x stainless steel isolator module model ITP 1004 A, s/n 759610 1x stainless steel automatic liquid vial filling and closing machine model ALF 5080 s/n 759608 1x stainless steel closing machine model VRK 4120 BL, s/n 759609 1x Videojet stainless steel label printer model 1580 stainless steel out-feed conveyor Complete with changeable format sets for 2R, 6R and 10R, changeable closing wheel sets sizes ø 22,5x9,4mm and ø 14,9x7,8mm, 6x Syntegon glove leak testers, various machine ...
Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechan ...
Automatic powder coating line was built in 2018. After a test launch, it has never been used. The powder coating line is designed for the automatic powder coating of metal components with a maximum length of 1500 mm and a width of 380 mm. It enables the performance of the entire technological process, from surface preparation, through the application of powder coating, to the final curing of the coating. The preparation of workpieces for coating takes place in a three-zone chemical section with immersion tanks. There, the elements are cleaned prior to the application of the coating. The process uses demineralised water, which ensures proper surface preparation and enhances coating adhesion and durability. Transportation of parts between successive stages is performed using a Power Free overhead conveyor system with height adjustment. Powder coating takes place in KC-08 spray boo ...
CFS oil filter, Type: OMR120, Serial number: 60, Year of construction: 2005, Dimensions: 2750 x 1100 x 1700 mm, Power: 3 x 380V, 50Hz, 4.5kW, Weight: 525 kg, Including pallet filterpaper, NN ambient cooling conveyor, Belt width: 950 mm, Belt length: 6000 mm, Belt: eye link belt of 3 mm, Compressed air: 6 Bar, Power: 3 x 380V, 50Hz, 2.7kW, Dimensions: 7600 x 1700 x 2000 mm, Variable speed control, Wanson Thermopac thermic boiler, Type: 200B, Serial number: 9335.56445, Year of construction: 1986, Heating: natural gas, Heating power: 233 kW, Power: 3 x 380V, 50Hz, 7.5kW, Dimensions: 3000 x 2450 x 2600 mm, Installation built into 10ft container, Belt width: 600 mm, Belt: Eyelink belt for extra small products, Frying length: 6000 mm, Heating: Thermal oil, Power: 3 x 400V, 50Hz, 8.6kW, Dimensions: 8700 x 2200 x 3800 mm, Weight: 4250 kg
Line For Profile PCV Theysohn 1. Double extruder CON 63 Screw size 63/130 mm // Simens // 2014 year prod. 2. Calibrator Theysohn 3. Take off devices Theysohn 4. Saw Theysohn 5. Collecting table Theysohn
Machine number: 18,307 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 245 A Cooling water pressure: min. 3 bar/max. 8 bar Cooling water volume: 70 l/min incl. gripping system and powder coating from the manufacturer RAPP Control: SIEMENS Auction-ID: A7-49089-242
With changeable format parts for vial size 2R, 6R and 10R, equipped with Siemens Simatic HMI touchscreen control, Videojet Dataflex 6530 thermal transfer overprinter, Domino laser marker model D620i with fume extraction unit model DPX1000, stainless steel lazy susan turntable, used floor space approximately 6500x2400mm, and various belongings and test vials/labels on 6 pallets Auction-ID: A1-48959-8
Continuous Butter Making Machine (CBM) which has a production capacity of 1.200 kg butter per hour sweet butter and 1.000 kg butter per hour cultured butter. Input of ± 2.400 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Speed controlled large volume and long buttering cylinder with double cooling system. Cylindrical buttering drum whose principle is based on thermal friction (patented process) with adjustable, short blow bars. Complete kneading area existing out of extra-long buttermilk separating section with circulation cooling and double buttermilk clarifier (patented), injecting iced buttermilk to intensively cool the butter grain, pressing tunnel in which the buttermilk is literally squeezed out of the butter mass, which ensures the production of butter with a very low water content in ord ...
The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 4 kW (motortag cannot be read anymore). Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 22.000 ltr/h @ 3,6 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1564, Diameter of the impellor: 165 mm, Motor: 4 kW, Current maximum capacity: 22 m3/h @ 3,6 bar
The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A. Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 45.000 ltr/h @ 3,0 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1570, Diameter of the impellor: 165 mm, Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A, Current ...
Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors > linear oscillator or spiral conveyor Auction-ID: A7-49816-16
Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-17
2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-65
- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...
- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-1
- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of manufacture ...
- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19
Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS ...
2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-63
- Chipping line for the treatment of natural wood. - Includes: • Feed hopper with inclined metal belt, for loading wooden pieces. • Vibratory load conveyor belt. • PALLMANN PHT 660 x 1050 chipper: main motor power 735 KW-992 rpm, rotor rotation speed 306 rpm, rotor diameter 2000 mm, rotor with 4 knives, feeding speed 38.60 m/min, chip thickness 31.50 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-2
Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-49816-13
2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-64
2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-62
Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-15
Manufacturer: Afag Automation AG / Afag GmbH Type: HLF-12-12 (Linear Conveyor / Linear Oscillate) Serial No.: HLF_15491 Technical Data: Modell / Type: HLF-12-12 Voltage: 24 V DC Current consumption: 1.3 A Power: 31 W Degree of protection: IP 54 Stroke frequency: 100 Hz Linear rail: mounted, approx. 50 cm Auction-ID: A7-49816-14
TOX Double Press (2-Cylinder System) Manufacturer: TOX Pressotechnik Model: Kraftpaket line-X – Double Cylinder Type Cylinder: X-K 008.3030.100.12H System: 1 Press = 2 Coupled Cylinders Condition: used, complete, dismantled from industrial production Technical data: TOX Kraftpaket line-X 2× Cylinder Type X-K 008.3030.100.12H incl. central control block, pressure gauge and sensors Robust industrial design Dimensions: Length approx. 80 cm Width approx. 30–32 cm Height approx. 25 cm Weight approx. 80 kg Series: TOX Kraftpaket line-X, Type X-K Force class: Size 008 (medium press force class) Stroke configuration: 30 mm pre-stroke + 30 mm Force/setting stroke Total stroke: 60 mm Powerpack stage: 100 (≈ 50–60 kN at 6 bar) Max. operating pressure: 6 bar (according to the blade) Volume: 47 ml Version: 12H (reinforced / Heavy Duty) Application: joining, embossing, clinching, punching, ...
Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg
Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control
Key data: 2 mm
Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11
Used complete line for crown cork clusures manufacturing. Including press PTC027/1996 year/ and lining machine PMC250/2001 year/. Liners profile 916. In 2015 original SACMI CVS system installed.
Used TETRA PAK TBA19 200 ml Slim filling lineTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak carton filling and secondary packaging solution built around a Tetra Pak TBA 19 V10 filling machine. The line is configured for the 125 ml Slim carton format and includes filling, straw application, tray packing and conveying equipment for compact beverage production and industrial packaging operations.Filling machine: Tetra Pak TBA 19 V10Format: 200 ml Slim cartonYear of manufacture: approximately 1996Running hours: approximately 26,000 hConveyor length: approximately 30 metersConveyor configuration: 4 × 90° curves and 2 × chain tensionersAdvanced Automation & Control SystemsThe equipment is arranged as an integrated filling and packaging line, allowing the filler, straw applicator, tray packer and conveyor system to operate as connected production stages. Th ...
Strip width... 650 mm Band thickness 0.2-3.0 mm Coil weight.. 5 tons. Coil I Diam. . 400/500/600 mm Coil A Dia. 1,500 mm Yield strength... 700 N/mm2 Strip width.. 10 - 250 mm Speed 150 m/min. Working direction.. right/ left Facility consists of: -Decoiler -Belt removal wedge -Scissor breasts 2 pcs. -Scrap wrapper -Band brake -Brake rollers 2 pcs. -Reel -Separation arm -2 control panels -Electrical control cabinets -Central hydraulics -Tools Plant dismantled in workshop
Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system
Incl. accessories consisting of: e.g. DSL - AES-SIGMA 20 - Suction Auction-ID: A1-49926-25
Incl. accessories consisting of: e.g. DSL - AES-SIGMA 20 - Suction ARO - Filter system, dimensions (LxWxH) approx: 2100x900x1250 mm Auction-ID: A1-49926-22
Computer missing Incl. accessories consisting of: e.g. DSL - AES-SIGMA 20 - Suction ARO - Filter system, dimensions (LxWxH) approx: 2100x900x1250 mm Auction-ID: A1-49926-23
Defect Incl. accessories consisting of: e.g. DSL - AES-SIGMATEC 20 - Extraction Auction-ID: A1-49926-24
Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS int ...
with feeding modules Dimensions: Module 1: 2240 x 740 1400 mm (L/W/H) Module 1/1: 2000 x 1100 mm (L/W/H), indication without emergency stop system and omega system. Including: 1 x conveyor belt with ABB motor, type: 102A, serial number: 38101848, dimensions: 3360 x 670 x 1100 mm (L/W/H) Auction-ID: A1-49964-1
Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling ...
It is compatible with the following ultrasound systems: Toshiba Aplio XG (SSA-790A) and Toshiba Aplio 500 (TUS-A500). Condition: Used equipment, sold as is Auction-ID: A1-50069-171
CIDAN QLA-PROFI slitting and cut-to-length line is designed for the efficient machining of sheet metal fed from a coil. It enables the slitting of material with a maximum thickness of 3 mm into strips of a specified width, as well as cut-to-length into sheets with a maximum length of 1550 mm. The combination of both cutting methods in one process enables the efficient preparation of the material for subsequent machining stages while maintaining high dimensional accuracy and repeatability. The CIDAN QLA-PROFI 1550/1,5 coil slitting line consists of machines built between 2008 and 2011, which were combined into one complete system in 2023. It includes: – 5t sheet metal decoiler – CIDAN QLA-PROFI cutting unit with straightening and feeding rolls, circular knives for slitting and a guillotine for cut-to-length – SPX-20/130-2C hydraulic table – sheet metal recoiler – scrap r ...
The GE 12 L-RS linear probe is a must-have tool that offers a wide range of frequencies for high-quality ultrasounds. With frequencies ranging from 4.5 to 13 MHz, this probe is ideal for musculoskeletal, neonatal, pediatric, and peripheral vascular applications. Its compact footprint and 39 mm field of view make it an ideal choice for a variety of medical needs. Compatible with the GE ultrasound range, Vivid Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-222
The Toshiba PLT-604AT linear probe has a frequency range of 4.0 MHz to 10.0 MHz and is compatible with Toshiba Aplio 50 (SSA-700A) ultrasound systems. Condition: Used equipment, sold as is Auction-ID: A1-50069-211
The GE L4-12t-RS linear probe is a must-have tool that offers a wide range of frequencies for high-quality ultrasounds. With frequencies ranging from 4.2 to 13 MHz, this probe is ideal for musculoskeletal, neonatal, pediatric, and peripheral vascular applications. Its compact footprint and 39 mm field of view make it an ideal choice for a variety of medical needs. Compatible with the GE ultrasound system, Vivid Condition: Pre-owned equipment, sold as is Auction-ID: A1-50069-220
maximum number of results exceeded
please refine your search
100.000 € 
